The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Contents
C - D - E - F - G - I - L - M - N - P - R - V -Index
C
changed information
description 1
clearing
dynamic addresses from the MAC address table 1
configuring
aging time 1
IGMP snooping on VLAN 1
Microsoft network load balancing support 1
port profile to support redundant routing protocols 1
static MAC address 1
Configuring 1
creating
VLAN 1
D
default settings
IGMP Snooping 1
MAC address table 1
VLAN 1
E
enabling
IGMP snooping 1
example
IGMP snooping 1
MAC address table 1
F
feature history
IGMP snooping 1
MAC address table 1
network load balancing 1
supporting redundant routing protocol 1
VLAN 1
G
guidelines and limitations
network load balancing 1
supporting redundant routing protocols 1
I
IGMP snooping 1 2
IGMPv1 1
IGMPv2 1
IGMPv3 1
L
Layer 2
configuration limits 1
Layer 2 Ethernet switching 1
Layer 2 switching
new and changed information 1
M
MAC address table 1 2
guidelines 1
N
network load balancing 1
new information
description 1
P
prerequisites
IGMP snooping 1
private VLANs 1
R
redundant routing protocols
support 1
V
VEM
Port Model 1
ports 1
switching traffic 1
virtual ports 1
verifying the configuration
IGMP snooping 1
MAC address table 1
VLAN 1
vEthernet Interface to support redundant routing protocols 1
VLAN 1 2
configuring characteristics 1
guidelines and limitations 1
VSM
port model 1