Cisco Nexus 1000V Port Profile Configuration Guide, Release 4.2(1)SV1(5.1)
New and Changed Information
Downloads: This chapterpdf (PDF - 102.0KB) The complete bookPDF (PDF - 1.18MB) | Feedback

New and Changed Information

Table Of Contents

New and Changed Information


New and Changed Information


This section lists new and changed content in this document by software release.

To find additional information about new features or command changes, see the following:

Release Notes.

Command Reference.

Feature
Description
Changed in release
Where Documented

Port binding

You can configure a static port binding with the auto option.

4.2(1)SV1(4a)

"Configuring Port Binding for vEthernet Port Profiles"

Port binding

You can configure a port binding with the dynamic [auto] option.

4.2(1)SV1(4a)

"Configuring Port Binding for vEthernet Port Profiles"

Port channel

The Creating a Port Profile for a Port Channel chapter was moved into the Cisco Nexus 1000V Interface Configuration Guide, Release 4.2(1)SV1(5.1).

4.2(1)SV1(4)

"Configuring Port Channels"

Port binding

You can configure port binding for vEthernet port profiles that affects how VMware port IDs are assigned.

4.2(1)SV1(4)

"Configuring Port Binding for vEthernet Port Profiles"

Restrict the visibility of Port Profiles

Restricts port profile visibility by user or user group.

4.2(1)SV1(4)

"Restricting Port Profile Visibility"

mtu command added

The mtu command replaces the system mtu command for uplink, Ethernet type port profiles.

4.2(1)SV1(4)

"Creating a System Port Profile"

system mtu command removed

The system mtu command is removed and replaced by the mtu command for port profiles.

4.2(1)SV1(4)

"Creating a System Port Profile"

show port-profile sync-status command added

Displays interfaces that are out of sync with the port profile.

4.2(1)SV1(4)

"Verifying the Port Profile Configuration"

show port-profile virtual usage command added

Displays the port profile usage by interface.

4.2(1)SV1(4)

"Verifying the Port Profile Configuration"

Atomic Inheritance

Port profile configuration applied to member interfaces.

4.2(1)SV1(4)

"Overview"

Port Profile Rollback

After configuration failure, a port profile and its member interfaces are rolled back to the last good configuration.

4.2(1)SV1(4)

"Overview"

Interface Quarantine

After a configuration failure, interfaces are shut down to maintain accurate configuration.

4.2(1)SV1(4)

"Overview"

show running-config port-profile

New command for displaying the port profile configuration.

4.0(4)SV1(2)

"Verifying the Port Profile Configuration"

Uplink port profile

Port profiles are not classified as uplink, but are, instead, configured as Ethernet or vEthernet.

4.0(4)SV1(2)

Cisco Nexus 1000V Interface Configuration Guide, Release 4.2(1)SV1(5.1)

Configuration limits

Added configuration limits for vEthernet interfaces, vEthernet trunks, port profiles, system profiles, and PVLANs.

4.0(4)SV1(2)