Cisco Nexus 1000V Troubleshooting Guide, Release 4.0(4)SV1(3)
New and Changed Information
Downloads: This chapterpdf (PDF - 71.0KB) The complete bookPDF (PDF - 4.35MB) | Feedback

New and Changed Information

Table Of Contents

New and Changed Information


New and Changed Information


This section describes the information in this document that is either new or has changed with each release.

To find additional information about new features or command changes, see the following:

Release Notes.

Command Reference.

New or changed content
Description
Changed in release
Where Documented

VEM health check

The VEM health check shows the cause of a connectivity problem and recommends next steps in troubleshooting.

4.0(4)SV1(3)

"Verifying Network Connectivity Between the VSM and the VEM" section on page 6-8

VSM connection failure after ESX reboot

The section describes how to prevent loss of connectivity related to an MTU mismatch following a reboot of the ESX.

4.0(4)SV1(3)

"Connection Failure After ESX Reboot" section on page 18-6