Cisco Nexus 1000V Quality of Service Configuration Guide, Release 4.0(4)SV1(1)
Index
Downloads: This chapterpdf (PDF - 117.0KB) The complete bookPDF (PDF - 1.93MB) | Feedback

Index

Table Of Contents

A - B - C - D - E - G - I - L - M - P - Q - R - S - T - U - V -

Index

A

access control lists. See ACLs

ACLs

classification criteria 2-3

configuring matching 2-4

IP version 2-4

matching sequence 2-3, 2-4

permit-deny 2-4

B

burst sizes

policing 4-5

C

changing QoS fields

marking 3-1

CIR

cir-markdown-map 4-4

defined 4-3

classes of traffic

class maps 2-1

defined 2-1

matching alternatives 2-1

classification

class-default 2-2

configuration example 2-15

egress traffic 2-2

guidelines 2-3

ingress traffic 2-2

limitations 2-3

troubleshooting 2-3, 2-4

class map

configuration example 2-15

procedure for matching 2-13

show 2-14

verifying 2-14

class-map limits 7-1

Class of Service. See CoS

configuration limits 7-1

conforming traffic

actions 4-4, 4-5

CoS

classification criteria 2-3

marking 3-2, 3-7

CoS value

configuring matching 2-11

D

data rates

policing 4-3

default setting

statistics 5-1

Differentiated Services Code Point. See DSCP

DiffServ. See DSCP

discard class

classification criteria 2-3

configuring marking 3-10

configuring matching 2-8, 2-9

marking 3-2

documentation

additional publications i-viii

DSCP 3-2

classification criteria 2-3

configuring matching 2-5

marking 3-2, 3-3

standard values 2-5

E

egress traffic

marking 3-2

matching 2-2

QoS policy map 3-12

examples

classification 2-15

class map 2-15

policing 4-9

QoS statistics 5-4

exceeding traffic

actions 4-4

G

guidelines

classification 2-3

marking 3-3

policing 4-3

I

ingress traffic

marking 3-2

matching 2-2

QoS policy map 3-12

IP precedence 3-2

classification criteria 2-3

configuring matching 2-6

marking 3-2, 3-5, 6-2

values 2-6

L

limitations

classification 2-3

marking 3-3

policing 4-3

limits, configuration 7-1

M

markdown maps

policing 4-4, 4-7

marking 3-2

configuring for discard class 3-10

configuring for QoS internal label 3-9

CoS 3-2, 3-7

description 3-1

discard class 3-2

DSCP 3-3

egress traffic 3-2

guidelines 3-3

ingress traffic 3-2

IP precedence 3-5, 6-2

limitations 3-3

QoS internal label 3-2

troubleshooting 3-2

verification 3-16

match criteria limit 7-1

matching

another class map 2-13

configuring for ACLs 2-4

configuring for CoS values 2-11

configuring for discard class 2-8, 2-9

configuring for DSCP 2-5

configuring for IP precedence 2-6

configuring for Layer 3 packet length 2-10

configuring for QoS internal label 2-7

configuring RTP 2-12

configuring UDP port ranges 2-12

egress traffic 2-2

ingress traffic 2-2

troubleshooting 2-3, 2-4, 2-8, 2-9

P

PIR

defined 4-3

pir-markdown-map 4-4

policers

applied to distributed traffic 4-3

types 4-4

policing

burst sizes 4-5

color-aware 4-3

configuration examples 4-9

data rates 4-3, 4-5

dual-rate 4-3

egress 4-7

guidelines 4-3

ingress 4-7

limitations 4-3

markdown 4-7

markdown maps 4-4

single-rate 4-3

troubleshooting 4-4

verifying 4-9

policy map

marking 3-12

show 3-16

policy map limits 7-1

Q

QoS

statistics 5-1

QoS internal label

classification criteria 2-3

configuring marking 3-9

configuring matching 2-7

marking 3-2

Quality of Service. See QoS

R

Real-Time Transport Protocol. See RTP

related documents i-viii

RTP

classification criteria 2-3

configuring matching 2-12

S

service policy limits 7-1

show class-map command 2-14

show policy-map command 3-16

show table-map command 3-16

statistics

clearing 5-3

default setting 5-1

displaying 1-3, 5-1, 5-2

display QoS 5-4

enabling 5-1

monitoring 5-1

T

Type of Service. See TOS

U

UDP port ranges

configuring matching 2-12

V

verifying

class map 2-14

marking 3-16

policing 4-9

policy 3-16

violating traffic

actions 4-4