Cisco MDS 9000 Family Data Mobility Manager Configuration Guide
New and Changed Information
Downloads: This chapterpdf (PDF - 92.0KB) The complete bookPDF (PDF - 5.3MB) | Feedback

New and Changed Information

Table Of Contents

New and Changed Information


New and Changed Information


This document provides release-specific information for each new and changed feature in Cisco Data Mobility Manager.

The Cisco MDS 9000 Family Data Mobility Manager Configuration Guide applies to Cisco NX-OS Release 4.2(1), but includes all features in Cisco SAN-OS releases. If you are running Cisco SAN-OS 3.x or lower software on an MDS switch, refer to the Cisco MDS 9000 Family Data Mobility Manager Configuration Guide for the release train that applies to the release on your switch.


Note As of NX-OS Release 4.1(1b), SAN-OS has been changed to NX-OS. References to SAN-OS releases before 4.1(1b) still apply.


To check for additional information about this release, refer to the Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Releases available at the following Cisco Systems website:

http://www.cisco.com/en/US/products/ps5989/prod_release_notes_list.html

Table 1 summarizes the new and changed features as described in the Cisco MDS 9000 Family Data Mobility Manager Configuration Guide, and tells you where they are documented. The table includes a brief description of each new feature and the release in which the change occurred.

Table 1 New and Changed Features for Cisco Data Mobility Manager 

Feature
Description
GUI Change
Changed in Release
Where Documented

Storage-based Method 3

Screenshots added for storage-based Method 3.

After creating a job, the DMM wizard checks if conditions are met before proceeding to the next step.

4.2(1)

Chapter 5, "Using the DMM GUI for Data Migration"

CPP and default-gateway

Note added about configuring CPP interface default-gateway on Fabric Manager.

 

4.2(1)

Chapter 2, "Getting Started"

Method 3

New option in the DMM configuration wizard for creating a job.

Allows you to choose the method to perform a data migration job.

4.1(3)

Chapter 5, "Using the DMM GUI for Data Migration"

Method 3 Topology

New topology for DMM method 3.

Describes the DMM method 3 topology in detail.

Added three configurations — single-fabric, two-fabric and three-fabric

4.1(3)

4.2(1)

Chapter 3, "Understanding DMM SAN Topologies"

MSM 18/4

New tab in the DMM configuration wizard.

Allows you to choose the MSM.

4.1(1b)

Chapter 5, "Using the DMM GUI for Data Migration"

Method

New option in the DMM configuration wizard for creating a job.

Allows you to choose the method to perform a data migration job.

3.3(1a)

Chapter 5, "Using the DMM GUI for Data Migration"

Finish

New option in the DMM configuration wizard.

Blocks the server access to the existing storage and begins the final pass of migration.

3.3(1a)

Chapter 5, "Using the DMM GUI for Data Migration"

Est. TOC

New tab in the DMM configuration wizard.

An estimation of time to complete the migration of a job.

3.3(1a)

Chapter 5, "Using the DMM GUI for Data Migration"