|
|
|
New and Changed Commands for Cisco NX-OS Release 4.2(7a) |
Slow drain |
system timeout congestion-drop command |
S Commands |
system timeout no-credit-drop command |
show logging onboard request-timeout command |
show process creditmon command |
Show Commands |
show logging onboard credit-loss command |
|
show logging onboard timeout-drops command |
counter tx-credit-not-available command |
C Commands |
counter credit-loss-reco command |
counter timeout-discards command |
show port-monitor active command |
Show Commands |
show system internal snmp credit-not-available command |
show port internal info interface fc command |
show port-monitor command |
|
counter lr-rx command |
C Commands |
|
monitor counter tx-discards command |
M Commands |
New and Changed Commands for Cisco NX-OS Release 4.2(1) |
Call Home |
destination-profile command (Deleted Avanti keyword from the syntax description. Added the Usage guideline) |
D Commands |
EEM |
action event-default command (Added a note) |
A Commands |
terminal event-manager bypass command (Added a note) |
T Commands |
event command (Added a note) |
E Commands |
Port Guard |
errdisable detect cause bit-errors command |
E Commands |
errdisable detect cause credit-loss command |
errdisable detect cause link-reset command |
errdisable detect cause signal-loss command |
errdisable detect cause sync-loss command |
errdisable detect cause trustsec-violation command |
|
feature command (Added ioa keyword to the syntax description) |
F Commands |
AAA Enhancement |
show aaa authentication login mschapv2 command |
Show Commands |
show aaa authorization all command |
|
clear tacacs-server statistics command |
C Commands |
clear radius-server statistics command |
aaa authentication login mschapv2 enable command |
A Commands |
aaa authorization command |
test aaa authorization command |
T Commands |
terminal verify-user command |
FC-redirect with IVR |
show ivr aam pre-deregister-check command |
show Commands |
FC-ID Visibility |
show fcns database command (Changed the command output) |
show Commands |
IOA |
ioa site-local command |
I Commands |
|
ioa cluster command |
|
interface ioa command |
|
load-balancing (Cisco IOA cluster Configuration submode) command |
L Commands |
|
nport command |
N Commands |
|
node (Cisco IOA cluster node configuration submode) command |
|
flowgroup command |
F Commands |
|
host command |
H commands |
|
tune command |
|
show ioa internal interface ioa command |
Show Commands |
|
show ioa cluster summary command |
|
show interface ioa command |
|
show ioa cluster command |
Port Group Monitoring |
show port-monitor active command |
show Commands |
show port-group-monitor command |
show port-group-monitor status command |
port-group-monitor activate command |
P Commands |
port-group-monitor name command |
port-group-monitor enable command |
port-group-monitor counter command |
monitor counter command |
M Commands |
Trustsec |
show running-config fcsp command |
show Commands |
|
show fcsp interface command |
|
fcsp esp sa command |
F Commands |
|
fcsp command |
|
ingress-sa command |
I commands |
|
interface fc command |
|
egress-sa command |
E Commands |
|
mode command |
M Commands |
|
key (sa configuration submode) command |
K Commands |
|
salt (sa configuration submode) command |
S Commands |
New and Changed Commands for Cisco NX-OS Release 4.1(3a) |
AAA enhancement |
aaa authentication login ascii-authentication command (enable the password aging command has been changed from aaa authentication login password-aging enable to aaa authentication login ascii-authentication) |
A Commands |
show aaa authentication login ascii-authentication command (enable the password aging command has been changed from show aaa authentication login password-aging enable to show aaa authentication login ascii-authentication) |
Show Commands |
New and Changed Commands for Cisco NX-OS Release 4.1(3) |
Call Home |
destination-profile command (Added the HTTPs URL and transport method to the syntax description) |
D Commands |
Port Guard |
errdisable detect cause link-down command |
E Commands |
Port Owner |
switchport owner command |
S Commands |
F port Trunking |
feature command (Added Keywords hhtp-server, fport-channel-trunk, npiv and npv to the syntax description) |
F Commands |
switchport command (Added the F and NP port mode) |
S Commands |
show flogi database interface command |
Show Commands |
F port Channeling |
show port-channel compatibility-parameters command |
Show Commands |
show port-channel consistency command |
show port-channel database command |
show port-channel internal command |
show port-channel summary command |
show port-channel usage command |
channel-group command (Deleted auto keyword from the syntax description) |
C Commands |
port-channel persistent command (Added usage guideline) |
P Commands |
|
clear asic-cnt command |
C Commands |
|
ntp command (Added a note) |
N Commands |
|
show fcns database command (Changed the command output for show fcns database detail) |
Show Commands |
Hardware |
show system command (Changed the show system uptime output) |
Show Commands |
Radius Configuration |
radius-server host command (Changed the command output) |
R Commands |
show running radius command (Changed the command output) |
Show Commands |
Scheduler |
scheduler command (Deleted a Note) |
S Commands |
EEM |
event manager applet command |
E Commands |
|
errdisable detect cause bit-errors command |
|
event manager policy command |
|
event manager environment command |
|
description command |
D Commands |
|
show event manager policy command |
Show Commands |
|
show event manager environment command |
|
action cli command |
A Commands |
|
action counter command |
|
|
action event-default command |
|
action exception log command |
|
action forceshut command |
|
action overbudgetshut command |
|
action policy-defaultcommand |
|
action reload command |
|
action snmp-trap commnd |
|
action syslog command |
|
Added SME Commands |
|
SME |
scaling batch enable command |
S Commands |
New and Changed Commands for Cisco NX-OS Release 4.1(1b) |
Call Home |
switch-priority command (Added usage guidelines) |
S Commands |
system delayed-traps timer command |
system delayed-traps enable mode command |
system health |
system health clear-errors command |
S Commands |
Port-monitor |
show port-monitor status command |
Show Commands |
show port-resources module command |
SNMP |
show system internal snmp lc command |
Scheduler |
scheduler command (Added a Note) |
S Commands |
SSM |
ssm upgrade delay command |
S Commands |
SANTap |
show isapi tech-support santap file command (Added usage guidelines) |
Show Commands |
show santap module dvt command |
show santap module dvtlun command |
show santap vttbl dvt command |
show santap vttbl dvt host command |
SDV |
show sdv command (Changed the command output) |
Show Commands |
attribute failover auto command |
A Commands |
General Configuration |
feature command |
F Commands |
DPVM |
clear dpvm merge statistics command |
C Commands |
show dpvm merge statistics command |
Show Commands |
show dpvm merge status command |
dpvm overwrite-duplicate-pwwn command |
D Commands |
Generation 3 Modules |
do command (Added the command output for extended receive bbcredit interface) (Added a Note) |
D Commands |
show interface command (Added the command output for bbcredit information for a switch port) (Added the command output for interface capabilities on a 48 port line card) |
Show Commands |
|
show module command (Added the command output for a module resource on a 24 port line card with all ports in shared mode) (Added the command output for a module resource on a 24 port line card with few ports in shared mode and few port in dedicated mode) (Added the command output for a module resource on a 12 port line card with all ports in dedicated mode) (Added the command output for a module resource on a 12 port line card with all ports in dedicated mode and extended feature enabled) |
Show Commands |
Hardware |
show hardware fabric-mode command |
Show Commands |
|
show version command (Changed the command output from SAN-OS to NX-OS) |
Show Commands |
|
show hardware command (Changed the command output from SAN-OS to NX-OS) |
|
|
show copyright command (Changed the command output from SAN-OS to NX-OS) |
|
Deprecated Commands (see the feature command for replacement commands) |
|
crypto ike enable command |
C Commands |
|
dpvm enable command |
D Commands |
|
fabric-binding enable command |
F Commands |
|
fcip enable command |
|
fcsp enable command |
|
ficon enable command |
|
ivr enable command |
I Commands |
|
port-security enable command |
P Commands |
|
sdv enable command |
S Commands |
|
tacacs+ enable command |
T Commands |
|
Added DMM Commands |
|
DMM |
dmm module job command (Added the set-vi and modify rate keywords) |
D Commands |
show dmm module command (Added the syntax description and the command output) |
Show Commands |
|
Added SME Commands |
|
SME |
cluster command (Cluster command is replaced by the feature command) |
C Commands |
show tech-support sme command (Added the command output) |
Show Commands |
show role command (Added the command output) |
show sme cluster (Added the syntax description) |
show sme transport command (Added the syntax description) |
show debug command (Added the syntax description) |
delete command (Added the syntax description) |
D Commands |