Table Of Contents
Release Notes for Cisco Fabric Manager
Release Date: November 2, 2009
Part Number: OL-20325-03 B0
This document describes the caveats and limitations for Cisco Fabric Manager Release 4.2(1) and Cisco Nexus 5000 Series Release 4.1(3)N1. Use this document in conjunction with the documents listed in the "Related Documentation for Fabric Manager" section.
Note As of Cisco Fabric Manager Release 4.2(1), Fabric Manager information will no longer appear in the Cisco MDS 9000 Family Release Notes for NX-OS releases. Cisco Fabric Manager Release Notes will include information that is exclusive to Fabric Manager as a management tool for Cisco MDS 9000 Family switches and Cisco Nexus 5000 Series switches.
Release notes are sometimes updated with new information on restrictions and caveats. Refer to the following website for the most recent version of the Cisco Fabric Manager Release Notes: http://www.cisco.com/en/US/products/ps10495/prod_release_notes_list.html
Table 1 shows the on-line change history for this document.
Table 1 Online History Change
Revision Date Description
Created release notes.
Corrected the upgrade path from Release 3.3(x) to Release 4.2(x) for PostgreSQLin Table 3.
This document includes the following:
Cisco Fabric Manager is the management tool for storage networking across all Cisco SAN and unified fabrics.
Cisco Fabric Manager provides comprehensive visibility for improved management and control of Cisco storage networks (2-, 4-, and 8-Gbps Fibre Channel and Fibre Channel over Ethernet [FCoE]), and it helps reduce overall total cost of ownership (TCO) and complexity through unified discovery of all Cisco Data Center 3.0 devices and through task automation and detailed reporting.
Cisco Fabric Manager provides centralized storage network management services, performance monitoring, federated reporting, troubleshooting tools, discovery, and configuration automation for the data center.
Cisco Fabric Manager includes these management applications:
•Fabric Manager (client and server)
•Fabric Manager standalone (FMSA)
•Fabric Manager Web Services
For detailed information on using Cisco Fabric Manager to configure a Cisco MDS 9000 Family switch or a Cisco Nexus 5000 Series switch, refer to the feature-specific Cisco Fabric Manager Configuration Guides available at the following website:
As the features and capabilities of Cisco Fabric Manager continue to evolve, it is important to be aware of the software version compatibility information described in the following sections.
Compatibility with Cisco MDS 9000 Family Switches
•Cisco Family Fabric Manager Release 4.2(1b) can manage MDS 9000 switches that are running any NX-OS 4.x release or any SAN-OS 3.x release.
•Any Fabric Manager 3.x release cannot fully manage switches that are running any MDS 9000 NX-OS 4.x release because Fabric Manager Release 3.x cannot manage features that are specific to the MDS 9000 NX-OS 4.x release series. Fabric Manager Release 3.3(x) can manage all legacy features in any SAN-OS 3.x, 2.x, and 1.x release.
•In terms of testing and support, future releases of Cisco Fabric Manager 4.x will be backwards compatible with the two previous releases of MDS NX-OS 4.x and with the two highest releases in the SAN-OS 3.x release series.
Compatibility with Cisco Nexus 5000 Series Switches
Cisco Family Fabric Manager Release 4.2(1b) has limited support for Cisco Nexus 5000 Series switches running versions earlier than Release 4.0(1a)N1, because it does not support FCoE features on Cisco Nexus 5000 Series switches running versions earlier than Release 4.0(1a)N1.
Table 1 lists Cisco Fabric Manager versions and the software products they support.
Software Download Site
To download the latest Cisco Fabric Manager software, access the Software Center at this URL:
Note If you would like to request a copy of the source code under the terms of either GPL or LGPL, send an e-mail to firstname.lastname@example.org.
Upgrading Cisco Fabric Manager
This section lists the guidelines recommended for upgrading Cisco Fabric Manager and includes the following topics:
Installation Changes for Cisco Fabric Manager in This Release
If you plan to make use of the new Fabric Manager Server federation feature, then you need to follow a slightly different installation procedure for Cisco Fabric Manager. See the "Installation of Cisco MDS NX-OS and Fabric Manager" section in the Cisco Fabric Manager Fundamentals Configuration Guide for details.
If you do not plan to install a federation of servers, then the installation procedure is unchanged from Cisco Fabric Manager Release 4.13(b).
Upgrading Your Version of Cisco Fabric Manager
Cisco Fabric Manager is included on the CD-ROM that ships with the switch. You can install Fabric Manager from the CD-ROM or from files that you download.
Installing Cisco Fabric Manager is a multistep process that involves installing a database, as well as Fabric Manager. The complete installation instructions are provided in the "Installation of Cisco MDS NX-OS and Fabric Manager" section in the Cisco Fabric Manager Fundamentals Configuration Guide, and are available on-screen once you launch the Fabric Manager installer from the CD-ROM.
Note When upgrading Fabric Manager, refer to the supported upgrade path shown in Table 3. For example, when upgrading from SAN-OS Release 3.1(x) to NX-OS Release 4.2(x), you will need to upgrade from Release 3.1(x) to Release 3.2(x) to Release 3.3(x) and then upgrade to NX-OS Release 4.2(x).
Fabric Manager Server cannot be installed on an Active Directory Server when using PostgreSQL. Fabric Manager servers are domain controllers and cannot create local PostgreSQL user accounts.
Table 4 lists the software that Cisco Fabric Manager Release NX-OS 4.2(1b) supports.
Table 4 Supported Software for Fabric Manager Release 4.2(1b)
Operating Systems Windows Java Browser
Windows 2003 and SP2
1.5 or 1.61
Internet Explorer 6
Windows 2003 and SP2
1.5 or 1.61
Internet Explorer 7
Windows 2003 and SP2
1.5 or 1.61
Windows XP SP2 and SP3
1.5 or 1.61
Internet Explorer 6
Windows XP SP2 and SP3
1.5 or 1.61
Windows Vista SP1 without UAC
1.5 or 1.61
Internet Explorer 7
Red Hat Enterprise Linux AS Release 5
1.5 or 1.61
1.5 or 1.61
Packages with default Solaris 9
1.5 or 1.61
Virtual System Operating System Server
Windows 2003 SP2
VMWare ESX Server 3.5.0
Oracle 11g Enterprise Edition
Oracle 10g Enterprise Edition
PostgreSQL 8.2 (Windows)
PostgreSQL 8.2 (Linux)
PostgreSQL 8.1 (Solaris)
Security ACS Version
3.1, 4.0, and 4.1
Firewall/FMS Proxy Version
Web Client/FM Server Encryption Type
Telnet Disabled Protocol
SSH v1 and SSH v2
Global Enforce SNMP Privacy Encryption
EMC Call Home
Event Forwarding via Traps or E-mail
Fabric Change Events
1 Do not use a version later than Java 1.6.12.
Note Cisco Fabric Manager has not been officially tested on any 64-bit platforms. Currently, we support only 32-bit platforms.
Table 5 lists the minimum amount of resources (disk, memory, and CPU) required for both the server and client for Fabric Manager to operate satisfactorily.
Fabric Manager Installation Process Overview
The following section presents the flow of the installation process at a high level. Review these steps before you begin the installation process:
1. Verify supported software. Cisco Fabric Manager and Device Manager have been tested with the software listed in Table 4.
2. Ensure data migration when upgrading Cisco Fabric Manager from Cisco SAN-OS Releases 3.1(2b) and later.
If you are upgrading Cisco Fabric Manager in Cisco SAN-OS Releases 3.1(2b) and later, be aware that data is migrated from the Hypersonic HSQL database to either the PostgreSQL database or Oracle Database 10g Express during the installation. Data is also migrated from Oracle Database 10g Express to Oracle Database 10g Express. If you migrate the database from Oracle to Oracle, the schema is updated. Refer to Table 3 for information on the supported upgrade path.
3. Ensure data migration when upgrading Cisco Fabric Manager from releases prior to Cisco NX-OS Releases 3.1(2).
If you are upgrading Fabric Manager in a Cisco SAN-OS Release prior to 3.1(2b), be aware that data is migrated from the Hypersonic HSQL database to either the PostgreSQL database or the Oracle Database 10g Express during the installation. The Fabric Manager Installer installs the PostgreSQL database on Windows. If you want to install the PostgreSQL database on Solaris or Linux, or if you want to install the Oracle Database 10g Express database, follow the instructions in the "Installing Fabric Manager" section in the Cisco Fabric Manager Fundamentals Configuration Guide.
4. If you are upgrading a previous installation of Fabric Manager, make sure the previous installation is installed and running. Do not uninstall the previous version. If the previous version is uninstalled, the database will not be migrated and your server settings will not be preserved.
5. Select the database.
If you want to use the Oracle Database 10g Express, you must install the database and create a user name and password before continuing with the Fabric Manager installation. We recommend the Oracle Database 10g Express option for all users who are running Performance Manager on large fabrics (1000 or more end devices).
If you want to install the PostgreSQL database, you must disable any security software you are running as PostgreSQL may not install certain folders or users. You must also log in as a Superuser before you start the installation.
6. Install Fabric Manager from the CD-ROM or from files that you download from cisco.com at the following website: http://cisco.com/cgi-bin/tablebuild.pl/mds-fm.
Installing Fabric Manager on Solaris
This section describes how to install Fabric Manager on Solaris.
To install Fabric Manager on Solaris, follow these steps:
Step 1 Set Java 1.5 or 1.6 to the path that is to be used for installing Fabric Manager.
Step 2 Install the database that is to be used with Fabric Manager.
Step 3 Copy the Fabric Manager jar file m9000-fm-4.2.1b.jar from the CD-ROM to a folder on the Solaris workstation.
Step 4 Launch the installer using the following command:
java -Xms512m -Xmx512m -jar m9000-fm-4.2.1b.jar
Step 5 Follow the onscreen instructions provided in the Fabric Manager management software setup wizard.
Installing Fabric Manager on Windows
This section describes how to install Fabric Manager on Windows.
Note Fabric Manager Server cannot be installed on an Active Directory Server when using PostgreSQL. Fabric Manager servers are domain controllers and cannot create local PostgreSQL user accounts.
Note If you are running Fabric Manager Server on Windows and using the PostgreSQL database, you should examine your Windows Active Directory environment for organizational units (OUs) and make the change recommended below to ensure that Fabric Manager Server does not periodically stop working.
On a Windows system, the Microsoft Active Directory applies a Group Policy Object (GPO) to the Fabric Manager Server. The GPO does not recognize the local user PostgreSQL because it is not in the GPO allow list. As a result, the GPO removes it, and the PostgreSQL database stops working.
To avoid this situation, you should move the Fabric Manager Server to its own OU and apply the same feature settings as the original OU, but remove the local user account to log in as a service.
If your server is running Terminal Services in Application mode, or if you are running Citrix Metaframe or any other variation, you need to enter the following command at the DOS prompt before installing Fabric Manager Server:
Step 1 Open a command-line prompt by selecting Start > Run, and then type cmd and press Return.
Step 2 At the command prompt, type user /install.
Note Do not close the command line window. This must remain open for the entire duration of the install.
The following is an example of the output of this command:
C:\Documents and Settings\user.domain>USER /INSTALL
User session is ready to install applications.
Step 3 Follow all steps needed to install Fabric Manager, Fabric Manager Server, and Device Manager. See the instructions later in this section.
Step 4 When the installation is complete, at the command prompt, type user /execute and press Return. Then type exit and press Return.
The following is an example of the output of this command:
C:\Documents and Settings\user.domain>USER /execute
User session is ready to execute applications.
To install Fabric Manager on Windows, follow these steps:
Step 1 Click the Install Management Software link.
Step 2 Choose Management Software > Cisco Fabric Manager.
Step 3 Click the Installing Fabric Manager link.
Step 4 Select the drive for your CD-ROM.
Step 5 Click the FM Installer link.
Step 6 Follow the onscreen instructions provided in the Fabric Manager Installer 4.2(1b).
Note If you have any folders open or Windows Explorer task windows open during the installation, you might see the following error message:
C:\Program Files\Cisco Systems\dcm\fm\help\shared\images\Thumbs.db (Access is denied)
To resolve this issue, close all open folders and open Windows Explorer task windows and restart the FM Installer.
Caution Windows 2000 is incompatible with Fabric Manager Release 4.2(1b). If you install Fabric Manager in a Windows 2000 environment, you are at risk of having an unstable Fabric Manager. We recommend that you exit the installation and update your environment. See Table 4 for the list of supported software that has been tested with Cisco Fabric Manager. See Table 3 for the supported upgrade paths for Fabric Manager.
To install Device Manager on your workstation, follow these steps:
Step 1 Enter the IP address of the switch in the Address field of your browser.
Step 2 Click the Cisco Device Manager link in the Device Manager installation window.
Step 3 Click Next to begin the installation.
Step 4 Follow the onscreen instructions to complete the installation of Device Manager.
Note If you use a Java JDK instead of a JRE on Solaris, you might encounter a problem trying to install the Device Manager from a web browser. This can happen because the installer heap limit of 256 MB is not sufficient. If you have this problem, save the jnlp link as file, increase the heap limit to 512 MB, and run javaws element-manager.jnlp at the shell prompt.
New Features in Cisco Fabric Manager Release 4.2(1b)
There are no new features in Cisco Fabric Manager Release 4.2(1b).
For information about the new features introduced in Cisco MDS NX-OS Release 4.2(1b), which is a FICON-qualified version of NX-OS Release 4.2(1a), see the Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.2(1b).
For information about new features introduced in the Cisco Nexus 5000 Series switches, see the Cisco Nexus 5000 Series Release Notes, Release 4.1(3)N1.
Licensed Cisco Fabric Manager Software Packages
This section describes software licenses for Cisco Fabric Manager and applications that are integrated into Cisco Fabric Manager. For information about licenses for Cisco MDS 9000 family software features, see the Cisco MDS 9000 Family Release Notes for MDS NX-OS Release 4.2(1b).
Fabric Manager Server Package
The standard Cisco Fabric Manager and Device Manager applications bundled at no charge with the Cisco MDS 9000 Family switches and the Cisco Nexus 5000 Series switches provide basic configuration and troubleshooting capabilities. The Fabric Manager Server package extends Cisco Fabric Manager by providing historical performance monitoring for network traffic hot spot analysis, centralized management services, and advanced application integration for greater management efficiency. Refer to the Cisco Fabric Manager Server package fact sheet for more information.
Storage Media Encryption Package
The Cisco MDS 9000 Storage Media Encryption package enables encryption of data at rest on heterogeneous tape devices and virtual tape libraries as a transparent fabric service. Cisco SME is completely integrated with Cisco MDS 9000 Family switches and the Cisco Fabric Manager application, enabling highly available encryption services to be deployed without rewiring or reconfiguring SANs, and allowing them to be managed easily without installing additional management software. Refer to the Cisco MDS 9000 Storage Media Encryption package fact sheet for more information. The Storage Media Encryption package is for use only with Cisco MDS 9000 Family switches.
Data Mobility Manager Package
The Cisco MDS 9000 Data Mobility Manager package enables data migration between heterogeneous disk arrays without introducing a virtualization layer or rewiring or reconfiguring SANs. Cisco DMM allows concurrent migration between multiple LUNs of unequal size. Rate-adjusted migration, data verification, dual Fibre Channel fabric support, and management using Cisco Fabric Manager provide a complete solution that greatly simplifies and eliminates most downtime associated with data migration. Refer to the Cisco MDS 9000 Data Mobility Manager package fact sheet for more information. The Data Mobility Manager package is for use only with Cisco MDS 9000 Family switches.
Limitations and Restrictions
This section lists the limitations and restrictions for this release. The limitations and restrictions are divided into the following categories:
This section describes general limitations related to Cisco Fabric Manager.
Solaris Windows Manager
Solaris Windows Manager does not resize windows correctly which affects some Device Manager screens. To resolve this, download and install the 119538-1 patch from Sun Microsystems. The patch (119538-17 GNONE 2.6.0: Windows Manager Patch, Generic, 2008/08/08) can be obtained from sunsolve.sun.com.
Upgrading to Recover Loss of Performance Manager Data
Caution You must upgrade to Fabric Manager Release 3.1(x) and then upgrade to a later release of Fabric Manager to avoid losing Performance Manager data. If data has been lost, follow the steps below to recover the data.
To recover lost data, follow these steps:
Step 1 Disable Performance Manager interpolation using Fabric Manager Web Client. Uncheck Interpolate missing statistics, then click Apply.
Step 2 Stop the Fabric Manager Server.
Step 3 Save the data file in the $INSTALL_DIR directory.
Step 4 Move the old RRD file into the $INSTALL_DIR/pm/db directory.
Step 5 Run $INSTALL_DIR/bin/pm.bat s.
Step 6 Restart Fabric Manager Server.
Java Web Start
When using Java Web Start, it is recommended that you do not use an HTML cache or proxy server. You can use the Java Web Start Preferences panel to view or edit the proxy configuration. To do this, launch the Application Manager, either by clicking the desktop icon (Microsoft Windows), or type ./javaws in the Java Web Start installation directory (Solaris Operating Environment and Linux), and then select Edit> Preferences.
If you fail to change these settings, you may encounter installation issues regarding a version mismatch. If this occurs, you should clear your Java cache and retry.
Shortcuts Remain on Desktop After Uninstall
If you install Fabric Manager or Device Manager on Windows Vista, you may see the application shortcuts on your desktop, even after you uninstall the application. To remove the shortcuts, refresh the desktop.
Limitations Specific to Cisco MDS 9000 Family Switches
This section lists the Cisco Fabric Manager limitations related to managing Cisco MDS 9000 Family switches.
Cisco Storage Media Encryption
The following limitations are described for Cisco SME:
Cisco SME Configuration Limits
Table 6 lists the Cisco SME configuration limits for this release.
Deleting Cisco SME Interfaces
A Cisco SME interface can be deleted from the cluster only after the interface is administratively shut down and all related tasks associated with the interface shutdown are complete.
Emulex Driver Version
In some instances, the Emulex driver version 184.108.40.206 may set the task attribute to HEAD_OF_QUEUE instead of SIMPLE_QUEUE. Certain tape drives do not accept this attribute and may reject these commands. The Emulex driver version 220.127.116.11 does not have this issue.
Compatibility of Fabric Manager and Data Mobility Manager
Cisco Fabric Manager in any MDS NX-OS 4.x release does not support Data Mobility Manager (DMM) in any SAN-OS 3.3(x) release or in any 3.2(x) release. To use the Cisco Fabric Manager GUI for DMM, both Fabric Manager and DMM must be running NX-OS or SAN-OS software from the same release series.
Using Fabric Manager for an In-Service Software Upgrade (ISSU)
If you are using Fabric Manager to perform an ISSU to NX-OS Release 4.2(1b) from any release prior to NX-OS Release 4.1(1a), the upgrade might fail. To work around this issue, perform the upgrade from the command-line interface using the install all command. DDTS CSCta94252, which is a duplicate of CSCsu68898, captures the details of this issue.
ISSU downgrades are not impacted.
Limitations for the Cisco Nexus 5000 Series Switches
This section lists the Cisco Fabric Manager limitations related to managing Cisco Nexus 5000 Series switches.
You cannot configure physical Ethernet interfaces using Fabric Manager or Device Manager. You must configure physical Ethernet interfaces using CLI commands.
You cannot use Device Manager to configure Ethernet or virtual Ethernet interfaces as SPAN source ports or to configure Ethernet interfaces as destination ports. The workaround is to configure SPAN using CLI commands.
In the Edit Local Full Zone Database tool, virtual Fibre Channel interfaces must be specified using the Switch Port WWN method of adding members to a zone. In the Add Members to Zone dialog box, the Switch & Port method and the Domain & Port method are not supported for virtual Fibre Channel interfaces.
This section lists the open and resolved caveats for this release. Use Table 7 to determine the status of a particular caveat. In the table, "O" indicates an open caveat and "R" indicates a resolved caveat.
Table 7 Open Caveats and Resolved Caveats Reference
DDTS Number Fabric Manager Software Release (Open or Resolved) Fabric Manager Software Release (Open or Resolved) 4.2(1a) 4.2(1b)
Symptom: When you install Cisco Fabric Manager on a Solaris host, an invalid JAR filename is generated, which causes the Java command to fail as follows:java -Xms512m -Xmx512m -jar "4_2_1a_S15/tmp/software/m9000-fm-4.2.1.jar"Unable to access jarfile 4_2_1a_S15/tmp/software/m9000-fm-4.2.1.jar
The HTML file lists the command incorrectly with m9000-fm-4.2.1.jar as the JAR filename. The correct filename should be m9000-fm-4.2.1a.jar.
Workaround: This issue is resolved.
Symptom: Fabric Manager takes 2 to 3 minutes to bring up the DMM job creation wizard in a setup with 25 switches, 400 enclosures, and 2400 entries in the name server.
Symptom: When replaying DMM job configurations saved as an ASCII text file (after performing a write erase), the DMM job includes discrepancies. These discrepancies occur due to the interface and zone configurations that are in an area below the DMM job configuration in the ASCII text file. The configurations stored in the ASCII text file are replayed sequentially from top to bottom.
Related Documentation for Fabric Manager
The documentation set for the Cisco Fabric Manager includes the following documents. To find a Fabric Manager document online, access the following website:
•Release Notes for Cisco MDS 9000 Family Fabric Manager
•Cisco Fabric Manager Fundamentals Configuration Guide
•Cisco Fabric Manager System Management Configuration Guide
•Cisco Fabric Manager Interfaces Configuration Guide
•Cisco Fabric Manager Fabric Configuration Guide
•Cisco Fabric Manager Quality of Service Configuration Guide
•Cisco Fabric Manager Security Configuration Guide
•Cisco Fabric Manager IP Services Configuration Guide
•Cisco Fabric Manager Intelligent Storage Services Configuration Guide
•Cisco Fabric Manager High Availability and Redundancy Configuration Guide
•Cisco Fabric Manager Inter-VSAN Routing Configuration Guide
•Cisco Fabric Manager Online Help
•Cisco Fabric Manager Web Services Online Help
Related Documentation for MDS 9000 Family Switches
The documentation set for NX-OS for the Cisco MDS 9000 Family switches includes the following documents. To find an NX-OS document online for the Cisco MDS 9000 Family switches, access the following website:
•Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Releases
•Cisco MDS 9000 Family Release Notes for MDS SAN-OS Releases
•Cisco MDS 9000 Family Release Notes for Storage Services Interface Images
•Cisco MDS 9000 Family Release Notes for Cisco MDS 9000 EPLD Images
Regulatory Compliance and Safety Information
•Regulatory Compliance and Safety Information for the Cisco MDS 9000 Family
•Cisco Data Center Interoperability Support Matrix
•Cisco MDS 9000 NX-OS Hardware and Software Compatibility Information and Feature Lists
•Cisco MDS NX-OS Release Compatibility Matrix for Storage Service Interface Images
•Cisco MDS 9000 Family Switch-to-Switch Interoperability Configuration Guide
•Cisco MDS NX-OS Release Compatibility Matrix for IBM SAN Volume Controller Software for Cisco MDS 9000
•Cisco MDS SAN-OS Release Compatibility Matrix for VERITAS Storage Foundation for Networks Software
•Cisco MDS 9500 Series Hardware Installation Guide
•Cisco MDS 9200 Series Hardware Installation Guide
•Cisco MDS 9100 Series Hardware Installation Guide
•Cisco MDS 9124 and Cisco MDS 9134 Multilayer Fabric Switch Quick Start Guide
Software Installation and Upgrade
•Cisco MDS 9000 NX-OS Release 4.1(x) and SAN-OS 3(x) Software Upgrade and Downgrade Guide
•Cisco MDS 9000 Family Storage Services Interface Image Install and Upgrade Guide
•Cisco MDS 9000 Family Storage Services Module Software Installation and Upgrade Guide
Cisco NX-OS Configuration
•Cisco MDS 9000 Family NX-OS Licensing Guide
•Cisco MDS 9000 Family NX-OS Fundamentals Configuration Guide
•Cisco MDS 9000 Family NX-OS System Management Configuration Guide
•Cisco MDS 9000 Family NX-OS Interfaces Configuration Guide
•Cisco MDS 9000 Family NX-OS Fabric Configuration Guide
•Cisco MDS 9000 Family NX-OS Quality of Service Configuration Guide
•Cisco MDS 9000 Family NX-OS Security Configuration Guide
•Cisco MDS 9000 Family NX-OS IP Services Configuration Guide
•Cisco MDS 9000 Family NX-OS Intelligent Storage Services Configuration Guide
•Cisco MDS 9000 Family NX-OS High Availability and Redundancy Configuration Guide
•Cisco MDS 9000 Family NX-OS Inter-VSAN Routing Configuration Guide
•Cisco MDS 9000 Family Command Reference
Intelligent Storage Networking Services Configuration Guides
•Cisco MDS 9000 I/O Acceleration Configuration Guide
•Cisco MDS 9000 Family SANTap Deployment Guide
•Cisco MDS 9000 Family Data Mobility Manager Configuration Guide
•Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
•Cisco MDS 9000 Family Secure Erase Configuration Guide
•Cisco MDS 9000 Family Cookbook for Cisco MDS SAN-OS
Troubleshooting and Reference
•Cisco NX-OS System Messages Reference
•Cisco MDS 9000 Family NX-OS Troubleshooting Guide
•Cisco MDS 9000 Family NX-OS MIB Quick Reference
•Cisco MDS 9000 Family NX-OS SMI-S Programming Reference
•Cisco MDS 9000 Family Fabric Manager Server Database Schema
Related Documentation for Nexus 5000 Series Switches
The documentation set for NX-OS for the Cisco Nexus 5000 Series switches includes the following documents. To find an NX-OS document online for the Cisco Nexus 5000 Series switches, access the following website:
•Cisco Nexus 5000 Series and Cisco Nexus 2000 Series Release Notes, Cisco NX-OS Release 4.1(3)N1
•Cisco Nexus 5000 Series Switch CLI Software Configuration Guide, Cisco NX-OS Release 4.1
•Cisco Nexus 2000 Series Fabric Extender Software Configuration Guide, Cisco NX-OS Release 4.1
•Cisco Nexus 5000 Series Hardware Installation Guide, Cisco NX-OS Release 4.1
•Cisco Nexus 2000 Series Fabric Extender Hardware Installation Guide, Cisco NX-OS Release 4.1
•Cisco Nexus 5000 Series Command Reference, Cisco NX-OS Release 4.1
•Cisco NX-OS System Messages Reference
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
This document is to be used in conjunction with the documents listed in the "Related Documentation for Fabric Manager" section.
CCDE, CCENT, CCSI, Cisco Eos, Cisco HealthPresence, Cisco IronPort, the Cisco logo, Cisco Nurse Connect, Cisco Pulse, Cisco SensorBase, Cisco StackPower, Cisco StadiumVision, Cisco TelePresence, Cisco Unified Computing System, Cisco WebEx, DCE, Flip Channels, Flip for Good, Flip Mino, Flipshare (Design), Flip Ultra, Flip Video, Flip Video (Design), Instant Broadband, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn, Cisco Capital, Cisco Capital (Design), Cisco:Financed (Stylized), Cisco Store, Flip Gift Card, and One Million Acts of Green are service marks; and Access Registrar, Aironet, AllTouch, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Lumin, Cisco Nexus, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, Continuum, EtherFast, EtherSwitch, Event Center, Explorer, Follow Me Browsing, GainMaker, iLYNX, IOS, iPhone, IronPort, the IronPort logo, Laser Link, LightStream, Linksys, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, PCNow, PIX, PowerKEY, PowerPanels, PowerTV, PowerTV (Design), PowerVu, Prisma, ProConnect, ROSA, SenderBase, SMARTnet, Spectrum Expert, StackWise, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0910R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2009 Cisco Systems, Inc. All rights reserved.