Guest

Cisco Prime Data Center Network Manager

Cisco DCNM for SAN Configuration Guides Master Index

  • Viewing Options

  • PDF (1.4 MB)
  • Feedback
Master Index

Table Of Contents

Symbols - Numerics - A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Z

Master Index

The following DCNM for SAN configuration guide abbreviations are used in the Master Index.

IOA- I/O Accelerator Configuration Guide

QoS - Quality of Service Configuration Guide

Fabric - Fabric Configuration Guide

IVR - Inter-VSAN Routing Configuration Guide

Int - Interfaces Configuration Guide

Ipsvc- IP Services Configuration Guide

Intsvc - Intelligent Services Configuration Guide

Sec- Security Configuration Guide

Sysmgnt - System Management Configuration Guide

Symbols

* (asterisk)

autolearned entries sec:9-7

first operational port int:2-23

port security wildcard sec:9-5

port security wildcards sec:9-5

Numerics

12-port 4-Gbps switching modules

BB_credit buffers int:5-12

configuration guidelines int:7-23

default settings int:7-20

See also switching modules

16-port switching modules

configuring BB_credits int:5-2

LEDs int:8-11

See also switching modules

24-port 4-Gbps switching modules

bandwidth fairness int:7-14

default settings int:7-20

example configurations int:5-11, int:7-46, int:7-48

oversubscription int:7-12

shared resources int:7-11

See also switching modules

24-port 8-Gbps switching modules

default settings int:7-21

example configurations int:5-7

32-port switching modules

configuring BB_credits int:5-2

SPAN guidelines sysmgnt:13-12

See also switching modules

3DES encryption

IKE sec:7-6

IPsec sec:7-6

4/44-port 8-Gbps switching modules

default settings int:7-21

example configurations int:5-8

48-port 4-Gbps switching modules

bandwidth fairness int:7-14

default settings int:7-20

example configurations int:5-9, int:7-46, int:7-47

oversubscription int:7-12

shared resources int:7-11

See also switching modules

48-port 8-Gbps switching modules

default settings int:7-21

example configurations int:5-6, int:7-45

See also switching modules

4-port 10-Gbps switching modules

BB_credit buffers int:5-14

configuration guidelines int:7-24

default settings int:7-20

See also switching modules

A

AAA

configuring accounting servicessec:4-14to ??

default settings sec:4-16

description sec:4-1

distributing with CFS (procedure) sec:4-29

enabling server distribution sec:4-27

local services sec:4-14

remote services sec:4-4

setting authentication sec:4-14

starting a distribution session sec:4-13

AAA authentication

configuring ipsvc:3-43, ipsvc:3-44

AAA servers

groups sec:4-4

monitoring sec:4-5

remote authentication sec:4-15

access control

enforcingiSCSI

enforcing access control ipsvc:3-13

iSCSI ipsvc:3-11, ipsvc:3-12

Access Control Lists. See IPv4-ACLs; IPv6-ACLs

access controlzoning based access controliSCSI

zoning based access control ipsvc:3-13

accounting

configuring servicessec:4-14to ??

ACL adjacency sharing

disabling for downgrading int:7-42

ACL based access control

configuring for iSCSI ipsvc:3-12

ACLs

configuring for iSCSI ipsvc:3-12

active zone sets

considerations fab:5-13

enabling distribution fab:5-26

administrative speeds

configuring int:8-10, int:8-24

administrative states

description int:8-6

setting int:8-21

advanced

IVR configuration ivr:3-1

IVR zone zones and zone sets ivr:3-2

Advanced Encrypted Standard encryption. See AES encryption

advertised interfaces ipsvc:3-38

AES encryption

description sysmgnt:12-4

IKE sec:7-6

IPsec sec:7-6

SNMP support sysmgnt:12-4

AES-XCBC-MAC

IPsec sec:7-6

AFIDs

configuring default ivr:3-10

configuring individual ivr:3-10

description ivr:3-2, ivr:3-6, ivr:1-4

guidelines ivr:3-4

aliases

switching between global device aliases and FC aliases fab:2-8

ALPA caches

allocation int:8-53

clearing int:8-30

description int:8-14

displaying contents int:8-54

inserting entries manually int:8-30

authentication

CHAP option ipsvc:3-54

configuring local with Device Manager ipsvc:3-44

fabric security sec:8-1

guidelines sec:4-15

iSCSI setup ipsvc:3-54

local sec:4-3, ipsvc:3-44

MD5 ipsvc:5-13

mechanism ipsvc:3-44

mutual CHAPmutual CHAP authentication ipsvc:3-45

remote sec:4-3, sec:4-15

restricting iSLB initiatorinitiator authentication

restrictingiSLB

restricting iSLB initiators     1

simple text ipsvc:5-13

user IDs sec:4-3

See also MD5 authentication

See also simple text authentication

authentication, authorization, and accounting. See AAA

authorization

rule placement order sec:3-10

autogenerated iSCSI targetiSCSI

autogenerated target ipsvc:3-13

auto mode

configuring int:8-23

auto-negotiation

configuring Gigabit Ethernet interfaces ipsvc:4-6, ipsvc:2-5

autonomous fabric ID

See AFIDs

autonomous fabric identifiers. See AFIDs

AutoNotify

description sysmgnt:4-5

auto port mode

description int:8-6

interface configuration int:8-2

autosensing speed

Generation 2 switching modules int:8-10

auto topology mode

enabling ivr:1-17

B

bandwidth fairness

disabling int:7-38

enabling int:7-38

basic

IVR configuration ivr:1-1

basic configuration

task list ivr:1-14

BB_credit buffers

12-port 4-Gbps switching module allocations int:5-12

12-port 4-Gbps switching module considerations int:5-13

24-port 4-Gbps switching module allocations int:5-11

24-port 4-Gbps switching module considerations int:5-11, int:5-12

24-port 8-Gbps switching module considerations int:5-7

4/44-port 8-Gbps switching module considerations int:5-8

48-port 4-Gbps switching module considerations int:5-9

48-port 8-Gbps switching module considerations int:5-6

4-port 10-Gbps switching module allocations int:5-14

4-port 10-Gbps switching module considerations int:5-14, int:5-15

allocation defaults (table) int:5-6, int:5-7, int:5-8, int:5-9

BB_credits

configuring int:5-20

description int:5-1

FICON port swapping fab:6-19

reason codes int:8-8

BB_SC

enabling int:5-19, int:5-24

beacon modes

configuring int:8-28

identifying LEDs int:8-11

bit errors

reasons int:8-12

bit error thresholds

configuring int:8-12, int:8-28

description int:8-12, int:8-28

boot variables

synchronizing ha:5-2

border switches

description ivr:1-4

IVR configuration guidelines ivr:3-6

B port mode

description int:8-6

interface modes int:8-6

B ports

configuring ipsvc:2-28

interoperability mode ipsvc:2-9

SAN extenders ipsvc:2-10

bridge port mode. See B port mode

bridge ports. See B ports

broadcast

routing fab:8-6

Brocade

native interop mode fab:6-5

buffer pools

Generation 2 switching modules int:5-2

buffer sizes

configuring in FCIP profiles ipsvc:2-26

buffer-to-buffer credits. See BB_credits

buffer-to-buffer start change. See BB_SC

build fabric frames

description sysmgnt:6-3

C

Call Home

alert groupssysmgnt:4-5to ??

AutoNotify feature sysmgnt:4-5

CFS support sysmgnt:5-2

configuration distribution sysmgnt:4-7, sysmgnt:4-29

configuring??to sysmgnt:4-19

configuring call home wizard sysmgnt:4-27

configuring e-mail options sysmgnt:4-26

contact information sysmgnt:4-21

default settings sysmgnt:4-19

description sysmgnt:4-1

destination profilessysmgnt:4-22to ??

duplicate message throttle sysmgnt:4-7, sysmgnt:4-29

enabling sysmgnt:4-21

features sysmgnt:4-2

HTTP proxy server sysmgnt:4-26

inventory notifications sysmgnt:4-7

message format options sysmgnt:4-2

RMON-based alerts sysmgnt:4-7

syslog-based alerts sysmgnt:4-6

testing communications sysmgnt:4-30

Call Home alert groups

configuring sysmgnt:4-5, sysmgnt:4-23

customizing messages sysmgnt:4-6

description sysmgnt:4-23

Call Home contacts

assigning information sysmgnt:4-21

Call Home destination profiles

attributes sysmgnt:4-22

configuring sysmgnt:4-22

Call Home messages

configuring levels sysmgnt:4-6

format options sysmgnt:4-2

Call Home notifications

full-txt format for syslog sysmgnt:4-32

XML format for RMON sysmgnt:4-36

XML format for syslog sysmgnt:4-33

CAs

authenticating sec:6-9

certificate download example sec:6-17

configuringsec:6-6to sec:6-15

creating a trust point sec:6-8

default settings sec:6-6

deleting digital certificates sec:6-14

enrollment using cut-and-paste sec:6-4

example configuration??to sec:6-20

identity sec:6-2

maintaining sec:6-12

maximum limits sec:6-5

monitoring sec:6-12

multiple sec:6-4

multiple trust points sec:6-3

peer certificates sec:6-5

purpose sec:6-2

certificate revocation lists. See CRLs

CFS

default settings sysmgnt:5-9

description??to sysmgnt:5-4

disabling on a switch sysmgnt:5-10

displaying configuration information sysmgnt:5-17

distribution modes sysmgnt:5-4

distribution over IP sysmgnt:5-6

distribution scopes sysmgnt:5-3

enabling on a switch sysmgnt:5-10

example configuration using Device Manager sysmgnt:5-19

example configuration using Fabric Manager sysmgnt:5-18

feature description sysmgnt:5-2

iSLB config distribution ipsvc:3-21

logging configuration distribution sysmgnt:9-6

merge support sysmgnt:5-6

merge support (procedure) sysmgnt:5-19

protocol description sysmgnt:5-3

SAN-OS features supported sysmgnt:5-2

saving configurations sysmgnt:5-13

CFS applications

clearing session locks sysmgnt:5-13

committing changes sysmgnt:5-5, sysmgnt:5-11

discarding changes sysmgnt:5-12

enabling sysmgnt:5-3

enabling (procedure) sysmgnt:5-11

fabric locking sysmgnt:5-5

CFS over IP

configuring static IP peers sysmgnt:5-7, sysmgnt:5-13

default settings sysmgnt:5-9

description sysmgnt:5-6

CFS regions

creating sysmgnt:5-15

description sysmgnt:5-8, sysmgnt:5-15

using CLI sysmgnt:5-15

CHAP authentication ipsvc:3-13, ipsvc:3-19, ipsvc:3-54

CHAP challenge ipsvc:3-45

CHAP response ipsvc:3-45

CHAP user name ipsvc:3-45

CIM

description fab:6-1

Cisco Access Control Server. See Cisco ACS

Cisco ACS

configuring for RADIUSsec:4-30to sec:4-34

configuring for TACACS+sec:4-30to sec:4-34

cisco-av-pair

specifying for SNMPv3 sec:4-10

Cisco Discovery Protocol ipsvc:4-10

Cisco MDS 9216i switches

configuring extended BB_credits int:5-17

Cisco Transport Controller. See CTC

Cisco vendor ID

description sec:4-9

class maps

configuring for data traffic qos:11-5

creating qos:11-5

cloud discovery. See iSNS cloud discovery

code pages

FICON text string formatting fab:6-24

command scheduler

default settings sysmgnt:10-2

description sysmgnt:10-1

enabling sysmgnt:10-3

specifying schedulessysmgnt:10-3to ??

common roles

configuring sec:3-4

deleting (procedure) sec:3-9

common users

mapping CLI to SNMP sec:3-5

company IDs

FC ID allocations fab:6-4

configuration

saving automatically for FICON fab:6-13

configuration files

FICON fab:6-15

configuration limits ivr:1-4

Configuring FCoE Using DCNM for SAN fab:5-3

configuring NPV int:9-10

congestion window monitoring. See CWM

console logging

configuring sysmgnt:9-8

console sessions

message logging severity levels sysmgnt:9-8

contact information

assigning for Call Home sysmgnt:4-21

contract IDs

description sysmgnt:4-11

control traffic

disabling QoS qos:11-2

enabling for QoS qos:11-2

Control Unit Port. See CUP in-band management

core dumps

IPS modules ipsvc:4-5

saving to CompactFlash sysmgnt:14-2

core files

clearing directory sysmgnt:14-6

copying periodically sysmgnt:14-6

displaying information sysmgnt:14-8

saving to external devices sysmgnt:14-1

CRLs

configuring sec:6-14

configuring revocation checking methods sec:6-10

description sec:6-5

downloading example sec:6-19

generation example sec:6-19

importing example??to sec:6-20

crypto IPv4-ACLs

any keyword sec:7-14

configuration guidelines sec:7-19

mirror images sec:7-13

crypto map entries

global lifetime values sec:7-18

setting SA lifetimes sec:7-28

crypto maps

auto-peer option sec:7-17

configuration guidelines sec:7-20

configuring perfect forward secrecy sec:7-28

entries for IPv4-ACLs sec:7-15

perfect forward secrecy sec:7-17

SA lifetime negotiations sec:7-16

SAs between peers sec:7-16

crypto map sets

applying to interfaces sec:7-18

CTC

description ipsvc:2-23

launching ipsvc:2-23

CUP in-band management

blocking restriction fab:6-28

description fab:6-18

placing CUPs in zones fab:6-32

current VSANs

description ivr:1-3

Cut-through routing mode ipsvc:3-15

cut-thru routing mode ipsvc:3-16

CWM

configuring in FCIP profiles ipsvc:2-25

D

Data Encryption Standard encryption. See DES encryption

data traffic

class maps qos:11-5

comparing VSANs and QoS qos:11-4

defining service policies qos:11-5

DWRR queues qos:11-6

enforcing service policies qos:11-6

example configuration qos:11-7

dead time intervals

configuring for FSPF fab:8-11

description fab:8-3

dedicated rate mode

description int:7-6

migrating from shared rate mode int:7-22

migrating to shared rate mode int:7-22

default gateways. See IPv4 default gateways

default networks. See IPv4 default networks

default settings

EEM sysmgnt:7-5

default VSANs

description fab:4-7

default zones

configuring access permissions fab:5-23

configuring policies fab:5-32

configuring QoS priorities fab:5-31

description fab:5-6

interoperability fab:6-6

policies fab:5-6

deficit weighted round robin schedulers. See DWRR schedulers

DES encryption

IKE sec:7-6

IPsec sec:7-6

destination IDs

exchange based int:2-5

flow based int:2-4

in-order delivery fab:8-6

path selection fab:4-9

destination profiles

configuring sysmgnt:4-5, sysmgnt:4-22

device alias database

committing changes fab:2-7

discarding changes fab:2-8

distribution to fabric fab:2-5

overriding fabric lock fab:2-5

device aliases

CFS support sysmgnt:5-2

comparison with zones (table) fab:2-4

creating fab:2-7

default settings fab:2-6

features fab:2-3

modifying the database fab:2-4

requirements fab:2-4

device IDs

Call Home format sysmgnt:4-12

Device Manager

viewing system messages sysmgnt:9-12

DH

IKE sec:7-6

DHCHAP

authentication modes sec:8-3

compatibility with other SAN-OS features sec:8-3

configuringsec:8-6to ??

default settings sec:8-6

description sec:8-2

enabling sec:8-3, sec:8-6

group settings sec:8-4

hash algorithms sec:8-4

licensing sec:8-2

passwords for local switches sec:8-4

passwords for remote devices sec:8-5

timeout values sec:8-5

See also FC-SP

differentiated services code point. See DSCP

Diffie-Hellman Challenge Handshake Authentication Protocol. See DHCHAP

Diffie-Hellman protocol. See DH

digital certificates

configuration examplesec:6-16to sec:6-17

configuringsec:6-6to sec:6-15

default settings sec:6-6

deleting from CAs sec:6-14

exporting sec:6-5, sec:6-13

generating requests for identity certificates sec:6-10

importing sec:6-5, sec:6-13

installing identity certificates sec:6-11

IPsecsec:7-7to sec:7-9

maintaining sec:6-12

maximum limits sec:6-5

monitoring sec:6-12

peers sec:6-5

purpose sec:6-2

requesting identity certificate example sec:6-18

revocation example sec:6-19

SSH support sec:3-6

digital signature algorithm. See DSA key pairs

DNS

default settings ipsvc:5-8

DNS servers

configuring ipsvc:5-7

domain ID

CFS support sysmgnt:5-2

domain IDs

allowed lists sysmgnt:6-6

assignment failures int:8-9

configuring allowed lists sysmgnt:6-14

configuring CFS distributionsysmgnt:6-7to sysmgnt:6-20

configuring fcalias members fab:5-6

contiguous assignments sysmgnt:6-7

distributing sysmgnt:6-1

enabling contiguous assignments sysmgnt:6-16

interoperability fab:6-6

IVR configuration guidelines ivr:3-5

non-unique and IVR NAT ivr:1-9

preferred sysmgnt:6-6, sysmgnt:6-14

static sysmgnt:6-6, sysmgnt:6-14

unique ivr:3-5

domain manager

fast restart feature sysmgnt:6-3

isolation int:8-9

downgrading

disabling ACL adjacency sharing int:7-42

DPVM

CFS support sysmgnt:5-2

enabling fab:3-5

requirements fab:3-2

using DPVM Setup Wizard (procedure) fab:3-5

DPVM databases

autolearned entries fab:3-3

clearing fab:3-8

comparing differences fab:3-11

configuring CFS distribution??to fab:3-10

copying fab:3-4

description fab:3-2

enabling autolearning fab:3-7

drivers

iSCSI ipsvc:3-2

drop latency time

configuring fab:8-14

DSA key-pairs

generating sec:3-14

dsa key pairs

generating sec:3-14

DSCP

configuring ipsvc:2-11

DWRR queues

changing weights qos:11-7

DWRR schedulers

description qos:11-3

dynamic bandwidth management

description int:7-9

dynamic initiator mode parameter

distributed with CFS ipsvc:3-21

dynamic iSCSI initiator

convert to staticiSCSI

convert dynamic initiator to static ipsvc:3-40

dynamic mapping ipsvc:3-5, ipsvc:3-18

dynamic mappingiSCSI

dynamic mappingiSCSI

static mappingstatic mapping ipsvc:3-4

Dynamic Port VSAN Membership. See DPVM

E

EBCDIC

FICON string format fab:6-24

edge switches

description ivr:1-4

edge VSANs

description ivr:1-3

EEM

actions sysmgnt:7-3

default settings sysmgnt:7-5

descriptionsysmgnt:7-1to ??

environment variables sysmgnt:7-4

event logs sysmgnt:7-2

events sysmgnt:7-2

guidelines sysmgnt:7-5

high availability sysmgnt:7-4

limitations sysmgnt:7-5

override policy sysmgnt:7-2

override policy actions (note) sysmgnt:7-4

parameter substitution sysmgnt:7-4

policies sysmgnt:7-2

prerequisites sysmgnt:7-4

script policies sysmgnt:7-4

system policies sysmgnt:7-2

EFMD

fabric binding sec:10-1

EISLs

PortChannel links int:2-2

ELP

verifying using Device Manager (procedure) ipsvc:2-30

e-mail addresses

assigning for Call Home sysmgnt:4-21

e-mail notifications

Call Home sysmgnt:4-1

embedded event manager. See EEM

enhanced ISLs. See EISLs

enhanced zones

advantages over basic zones fab:5-11

broadcast frames fab:5-36

changing from basic zones fab:5-34

creating attribute groups fab:5-36

enabling fab:5-35

merging databases fab:5-11

modifying database fab:5-35

entity status inquiry. See ESI

E port mode

classes of service int:8-3

description int:8-3

E ports

32-port guidelines int:8-18

32-port switching module configuration guidelines int:2-14

configuring ipsvc:2-12, int:8-22

fabric binding checking sec:10-2

FCS support sysmgnt:8-1

FSPF topologies fab:8-1

isolation int:8-9

recovering from link isolations fab:5-8

SPAN sources sysmgnt:13-3

trunking configuration ipsvc:2-23

ESI

non-resp threshold ipsvc:3-59

Ethernet interface

configuring int:4-1

default settings int:4-1

interface information int:4-2

Device Manager int:4-2

Fabric Manager int:4-2

overview int:4-1

Ethernet PortChannels

configuring ipsvc:4-12

description ipsvc:4-9

iSCSI ipsvc:3-28

redundancy ipsvc:2-7

Exchange Fabric Membership Data. See EFMD sec:10-1

exchange IDs

in-order delivery fab:8-6

path selection fab:4-9

exchange link parameter. See ELP

expansion port mode. See E port mode

explicit fabric logout ipsvc:3-8

extended BB_credits

configuring int:5-22

displaying information int:5-25

Generation 2 switching modules int:5-16

licensing int:5-16

Extended Binary-Coded Decimal Interchange Code. See EBCDIC fab:6-24

Extended Link Protocol. See ELP

external loopback tests

description sysmgnt:14-7

performing sysmgnt:14-7

external RADIUS server

CHAP ipsvc:3-55

external RADIUS servers

CHAP ipsvc:3-55

F

fabric binding

checking for Ex ports sec:10-2

compatibility with DHCHAP sec:8-3

default settings sec:10-3

description??to sec:10-2

EFMD sec:10-1

enforcement sec:10-2

port security comparison sec:10-1

Fabric Configuration Server. See FCS

Fabric Configuration Servers. See FCSs

Fabric-Device Management Interface. See FDMI

fabric lock

releasing ipsvc:3-53

fabric loop port mode. See FL port mode

Fabric Manager ivr:1-15

Fabric Manager Web Server

viewing system messages sysmgnt:9-12

fabric port mode. See F port mode

fabric pWWNs

zone membership fab:5-2

fabric reconfiguration

fcdomain phase sysmgnt:6-1

fabrics

See also build fabric frames

fabrics. See RCFs; build fabric frames

fabric security

authentication sec:8-1

default settings sec:8-6

Fabric Shortest Path First. See FSPF

fabric WWNs. See fWWNs

failure actions

configuring sysmgnt:14-3

fault tolerant fabrics

example (figure) fab:8-16

fcaliases

adding members fab:5-24

cloning fab:5-30

configuring for zones fab:5-6

creating fab:5-23

renaming fab:5-30

FCC

benefits qos:11-1

logging facility sysmgnt:9-2

fcdomains

autoreconfigured merged fabrics sysmgnt:6-4

configuring CFS distributionsysmgnt:6-7to sysmgnt:6-20

default settings sysmgnt:6-9

description sysmgnt:6-1

disabling sysmgnt:6-12

displaying informationsysmgnt:6-20to ??

domain manager fast restart sysmgnt:6-3

dsiplaying statistics sysmgnt:6-20

enabling sysmgnt:6-12

enabling autoreconfiguration sysmgnt:6-13

incoming RCFs sysmgnt:6-4

overlap isolation int:8-9

restarts sysmgnt:6-3

switch priorities sysmgnt:6-4

FC ID

configuring ivr:3-13

features and benefits ivr:3-2

guidelines ivr:3-7

FC ID allocation

FICON implementation fab:6-12

FC IDs

allocating sysmgnt:6-1, fab:6-4

allocating default company ID lists fab:6-4

allocating for FICON fab:6-12

allocation for HBAs fab:6-4

configuring fcalias members fab:5-6

description sysmgnt:6-8

persistentsysmgnt:6-8to sysmgnt:6-19

FCIP ipsvc:3-1

checking trunk status (procedure) ipsvc:2-23

compatibility with DHCHAP sec:8-3

compression ipsvc:2-18

configuring using FCIP Wizard??to ipsvc:2-22

default parameters ipsvc:2-19

discarding packets ipsvc:2-28

enabling ipsvc:2-21

FICON support fab:6-5

Gigabit Ethernet ports ipsvc:4-4, ipsvc:2-2

high availabilityipsvc:2-5to ??

IPS modules ipsvc:2-2

IP storage services support ipsvc:4-1, ipsvc:4-2

link failures ipsvc:2-6

MPS-14/2 module ipsvc:2-2

reserving ports for FICON fab:6-11

tape accelerationipsvc:2-14to ??

time stamps ipsvc:2-28

VE ports ipsvc:2-2

verifying ELP (procedure) ipsvc:2-30

verifying interfaces (procedure) ipsvc:2-30

virtual ISLs ipsvc:2-2

VRRP ipsvc:2-7

write acceleration ipsvc:2-12

FCIP compression

configuring (procedure) ipsvc:2-22

description ipsvc:2-18

FCIP interfaces

binding to FICON port numbers fab:6-28

configuring peers ipsvc:2-9

configuring QoS ipsvc:2-11

creating ipsvc:2-9

parameters ipsvc:2-5

SPAN sources sysmgnt:13-4

FCIP links

B port interoperability mode ipsvc:2-9

configuring ipsvc:2-22

configuring peers ipsvc:2-9

configuring QoS ipsvc:2-11

description ipsvc:2-3

endpoints ipsvc:2-3

initiating IP connections ipsvc:2-28

TCP connections ipsvc:2-3

FCIP peers

configuring IP addresses ipsvc:2-27

FCIP profiles

configuring TCP parametersipsvc:2-24to ??

creating ipsvc:2-22

description ipsvc:2-4

FCIP tape acceleration

configuring ipsvc:2-29

descriptionipsvc:2-14to ipsvc:2-18

FCIP TCP parameters

configuring buffer size ipsvc:2-26

configuring CWM ipsvc:2-25

configuring keepalive timeouts ipsvc:2-24

configuring maximum jitter ipsvc:2-26

configuring maximum retransmissions ipsvc:2-25

configuring minimum retransmit timeouts ipsvc:2-24

configuring PMTUs ipsvc:2-25

configuring SACKs ipsvc:2-25

configuring window management ipsvc:2-25

FCIP write acceleration

configuring ipsvc:2-29

configuring (procedure) ipsvc:2-22

description ipsvc:2-12

FCoE

configuring fab:5-1

Device Manager fab:5-4

enabling fab:5-2

FCoE Configuration Wizard int:4-6

FCP

intermixing protocols fab:6-5

routing requests ipsvc:3-4

FCS

description sysmgnt:8-1, sysmgnt:8-3

logging facility sysmgnt:9-2

significance sysmgnt:8-2

FC-SP

authentication sec:8-1

enabling sec:8-6

enabling on ISLs sec:8-5

See also DHCHAP

FCSs

default settings sysmgnt:8-3

description sysmgnt:8-1, sysmgnt:8-3

displaying information??tosysmgnt:8-3, sysmgnt:8-4to ??

fctimers

CFS support sysmgnt:5-2

distribution fab:6-3

FDMI

description fab:7-2

displaying database information fab:7-9

Federal Information Processing Standards. See FIPS

Fiber Channel interfaces

configuring system default port mode f int:8-23

Fibre Channel ipsvc:3-1

iSCSI targetsipsvc:3-4to ipsvc:3-62

time out valuesfab:6-2to ??

TOVs fab:6-8

Fibre Channel Analyzers

configuring using SPAN sysmgnt:13-18

Fibre Channel analyzers

monitoring without SPAN sysmgnt:13-5

Fibre Channel Congestion Control. See FCC

Fibre Channel domains. See fcdomains

Fibre Channel header modifications ivr:1-5

Fibre Channel interfaces

administrative states int:8-6

BB_credits int:5-1

configuring int:8-21

configuring auto port mode int:8-23

configuring beacon modes int:8-28

configuring bit error thresholds int:8-12, int:8-28

configuring descriptions int:8-26

configuring frame encapsulation int:8-10

configuring port modes int:8-22

configuring port speed group int:8-25

configuring receive data field sizes int:5-20

configuring speeds int:8-10, int:8-24

default settings sec:3-7, sec:4-16, sec:6-6, sec:8-6, sec:7-21, sec:9-9, sec:10-3, ipsvc:2-19, ipsvc:4-11, ipsvc:5-8, ipsvc:2-4, ipsvc:3-13, ipsvc:4-4, int:7-20, int:8-19, int:2-16, int:3-10, fab:2-6, fab:3-5, fab:6-20, fab:7-5, fab:8-8, fab:2-7, fab:4-9, fab:5-15, fab:6-7

deleting from PortChannels int:2-9

disabling int:8-21

displaying capabilities on Generation 2 switching modules int:7-43

displaying informationint:8-44to int:8-51

enabling int:8-21

graceful shutdown int:8-9

modesint:8-2to int:8-6

operational states int:8-6

performance buffers int:5-2

reason codes int:8-7

states int:8-6

taking out of service on Generation 2 switching modules int:7-39

troubleshooting operational states int:8-8

See also interfaces int:8-6

Fibre Channel over IP. See FCIP

Fibre Channel Protocol. See FCP

Fibre Channel Security Protocol. See FC-SP

Fibre Channel targets

dynamic importing ipsvc:3-36

dynamic mapping ipsvc:3-36

Fibre Channel traffic

SPAN sources sysmgnt:13-4

Fibre Channel write acceleration

default settings intsvc:5-2

enabling intsvc:5-2

estimating number of write buffers intsvc:5-1

licensing intsvc:5-1

modifying number of write buffers intsvc:5-2

Fibre Channel zoning-based access control ipsvc:3-13

Fibre Connection. See FICON

FICON

advantages on MDS switchesfab:6-3to ??

automatic configuration save fab:6-13

calculating flow load balance (procedure) fab:6-33

cascading fab:6-7

configuration filesfab:6-15to fab:6-31

configuring??to fab:6-27

configuring portsfab:6-27to fab:6-30

CUP in-band management fab:6-18

default settings fab:6-20

description??to fab:6-8

FC4 protocols fab:6-2

FC ID allocations fab:6-12

FCIP support fab:6-5

host timestamp control fab:6-25

implemented ports fab:6-10

installed ports fab:6-11

manually enabling fab:6-23

MDS-supported features fab:6-5

PortChannel support fab:6-5

port numbering??to fab:6-12

port swappingfab:6-16to ??

RLIRsfab:6-14to fab:6-35

saving configuration changes fab:6-13

suspending a VSAN fab:6-23

tape accelerationfab:6-16to fab:6-31

text string formatting codes fab:6-24

unimplemented port fab:6-10

VSAN offline state fab:6-23

FICON configuration files

applying to running configuration fab:6-30

copying fab:6-30

displaying fab:6-35

editing fab:6-30

view latest information fab:6-30

FICON port numbers

assigning to slots fab:6-21

default numbering scheme fab:6-8

FCIP interfaces fab:6-11

implemented addresses fab:6-10

installed ports fab:6-11

logical interfaces fab:6-11

numbering guidelines fab:6-19

PortChannel interfaces fab:6-11

port swapping fab:6-10

reserved numbering scheme fab:6-11

unimplemented addresses fab:6-10

uninstalled ports fab:6-11

FICON ports

assigning address names using Device Manager fab:6-29

binding to FCIP interfaces fab:6-28

binding to PortChannels fab:6-27

blocking fab:6-28

configuring prohibiting default state fab:6-28

displaying address information fab:6-36

prohibiting fab:6-14

swapping configurations fab:6-31

FICON port swapping

configuring (procedure) fab:6-31

guidelines fab:6-19

FICON tape acceleration

configuration considerations fab:6-20

configuring fab:6-31

description fab:6-16

FICON tape read acceleration

configuring fab:6-32

File Transfer Protocol. See FTP

FIPS

FLOGI

displaying details fab:7-8

logging facility sysmgnt:9-2

flow statistics

description fab:8-8

FL port mode

classes of service int:8-3

description int:8-3

FL ports

configuring int:8-22

description int:8-3

DPVM support fab:3-3

nonparticipating code int:8-9

persistent FC IDs sysmgnt:6-17

SPAN sources sysmgnt:13-3

See also Fx ports

F port mode

classes of service int:8-3

description int:8-3

F ports

configuring int:8-22

description int:8-3

DPVM support fab:3-3

SPAN sources sysmgnt:13-3

See also Fx ports

FPSF

load balancing (example) ipsvc:2-6

frame encapsulation

configuring int:8-10

frames

configuring MTU size ipsvc:4-6, ipsvc:2-5

FSPF

computing link cost fab:8-11

configuring globallyfab:8-2to ??

configuring Hello time intervals fab:8-3

configuring link cost fab:8-3

dead time intervals fab:8-3

default settings fab:8-8

description fab:8-1

disabling fab:8-10

disabling on interfaces fab:8-12

disabling routing protocols fab:8-10

displaying databases fab:8-15

enabling fab:8-10

fail-over with PortChannels fab:8-16

fault tolerant fabrics fab:8-16

in-order deliveryfab:8-6to ??

interoperability fab:6-7

link state record defaults fab:8-3

multicast root switches fab:8-6, fab:8-13

reconvergence times fab:8-2

redundant links fab:8-16

resetting to defaults fab:8-10

retransmitting intervals fab:8-4

routing services fab:8-1

topology examples??to fab:8-17

FSPF multicast roots

configuring switches fab:8-13

FSPF routes

configuring fab:8-12

description fab:8-4

FSPF routing

multicast fab:8-6

FTP

logging facility sysmgnt:9-2

full core dumps

IPS modules ipsvc:4-5

full zone sets

considerations fab:5-13

enabling distribution fab:5-26

fWWNs

configuring fcalias members fab:5-6

Fx ports

32-port default int:8-18

configuring int:8-22

description int:8-5

FCS sysmgnt:8-1

FCS support sysmgnt:8-1

interface modes int:8-5

VSAN membership fab:4-5

See also F ports; FL ports int:8-5

G

Generation 1 switching modules

extended BB_credits int:5-17

port index allocations int:7-15

QoS behavior qos:11-6

Generation 2 switching modules

buffer groupsint:5-2to int:5-14

configuring port speeds int:7-26

configuring rate modes int:7-27

default settings int:7-20

descriptionint:7-1to int:7-3

disabling ACL adjacency sharing int:7-42

displaying port resources int:7-40

dynamic bandwidth management int:7-9

extended BB_credits int:5-16, int:5-18

interface capabilities int:7-43

out-of-service interfaces int:7-11

port groups int:7-3

port index allocations int:7-15

port rate modes int:7-4

QoS behavior qos:11-6

recovering from powered-down state int:7-18

releasing shared resources int:7-41

taking interfaces out of service int:7-39

Generation 3 switching modules

default settings int:7-21

Gigabit Ethernet

IPv4 example configuration ipsvc:4-5

Gigabit Ethernet interface example ipsvc:3-26

Gigabit Ethernet interfaces

configuringipsvc:4-4to ipsvc:4-10

configuring auto-negotiation ipsvc:4-6, ipsvc:2-5

configuring high availabilityipsvc:4-8to ??

configuring IPv6 addresses ipsvc:3-13

configuring MTU frame sizes ipsvc:4-6, ipsvc:2-5

configuring promiscuous mode ipsvc:4-6, ipsvc:2-6

default parameters ipsvc:2-4

subinterfaces ipsvc:4-7, ipsvc:2-3

subnet requirements ipsvc:4-7, ipsvc:2-3

Gigabit Ethernet subinterfaces

configuring VLANs ipsvc:2-6

global authentication

paramter distributed ipsvc:3-21

global keys

assigning for RADIUS sec:4-8

H

hard zoning

description fab:5-7

HA solution example ipsvc:3-25

HBA port ipsvc:3-7, ipsvc:3-10

HBA ports

configuring area FCIDs sysmgnt:6-9

HBAs

device aliases fab:2-1

FC ID allocations fab:6-4

Hello time intervals

configuring for FSPF fab:8-11

description fab:8-3

hexadecimal fields ipsvc:3-11

high availability

automatic synchronization ha:5-3

compatibility with DHCHAP sec:8-3

description ha:5-1

EEM sysmgnt:7-4

Ethernet PortChannel ipsvc:3-28

Ethernet PortChannels ipsvc:2-7

Fibre Channel PortChannels ipsvc:2-8

process restartability ha:5-1

supervisor module switchover mechanism ha:5-1

synchronizing supervisor modules ha:5-2

VRRP ipsvc:2-7, ipsvc:3-27

VRRPVRRP-based high availability ipsvc:3-27

host control

FICON fab:6-25

host names

configuring for digital certificates sec:6-7

I

IBM PPRC

FICON support fab:6-5

ICMP

IPv6 ipsvc:3-6

ICMP packets

IPv6 header format, figure ipsvc:3-7

type value sec:5-4

IDs

Cisco vendor ID sec:4-9

contract IDs sysmgnt:4-11

serial IDs sysmgnt:4-12, sysmgnt:4-14, sysmgnt:4-15, sysmgnt:4-17

server IDs sysmgnt:4-12

site IDs sysmgnt:4-11

IKE

algorithms for authentication sec:7-6

default settings sec:6-6, sec:7-21

description sec:7-4

initializing sec:7-9

refreshing SAs sec:7-26

terminology sec:7-5

transforms for encryption sec:7-6

viewing configuration (procedure) sec:7-23

IKE domains

clearing sec:7-25

description sec:7-10

IKE initiators

configuring version sec:7-25

IKE peers

configuring keepalive times sec:7-24

IKE policies

configuring negotiation parameters sec:7-24

negotiation sec:7-10

IKE tunnels

clearing sec:7-25

description sec:7-10

in-band management

CUP fab:6-18

IPFC ipsvc:5-4

indirect link failures

recovering qos:2-1

initiators

statically mapped iSCSI ipsvc:3-17

in-order delivery

configuring drop latency time fab:8-14

enabling for VSANs fab:8-14

enabling globally fab:8-13

guidelines fab:8-8

reordering network frames fab:8-6

reordering PortChannel frames fab:8-7

Intelligent Storage Services

disabling (procedure) intsvc:2-5

disabling with force option intsvc:2-6

SCSI flow servicesintsvc:2-1tointsvc:2-4, ??to intsvc:3-3

SCSI flow statisticsintsvc:2-1tointsvc:2-4, ??to intsvc:3-3

interfaces

adding to PortChannels int:2-8, int:2-20

assigning to VSANs fab:4-11

configuring data field size int:5-25

configuring descriptions int:8-26

configuring fcalias members fab:5-7

default settings sec:3-7, sec:4-16, sec:6-6, sec:8-6, sec:7-21, sec:9-9, sec:10-3, ipsvc:2-19, ipsvc:4-11, ipsvc:5-8, ipsvc:2-4, ipsvc:3-13, ipsvc:4-4, int:7-20, int:8-19, int:2-16, int:3-10, fab:2-6, fab:3-5, fab:6-20, fab:7-5, fab:8-8, fab:2-7, fab:4-9, fab:5-15, fab:6-7

deleting from PortChannels int:2-9

displaying informationint:8-44to int:8-51

displaying SFP information int:8-50

forced addition to PortChannels int:2-9, int:2-21

isolated states int:2-9

SFP types int:8-53

suspended states int:2-9

VSAN membership fab:4-7

interface statistics

gathering int:8-52

internal loopback tests

description sysmgnt:14-6

performing sysmgnt:14-6

Internet Control Message Protocol. See ICMP

Internet Key Exchange. See IKE

Internet Storage Name Service. See iSNS

interoperability

configuring interop mode 1 fab:6-11

description fab:6-5

verifying status fab:6-12

VSANs fab:4-9

interop modes

configuring mode 1 fab:6-11

default settings fab:6-7

description fab:6-5

Inter-VSAN Routing zones. See IVR zones

Inter-VSAN Routing zone sets. See IVR zone sets

inventories

configuring notifications sysmgnt:4-28

IOD. See in-order delivery

IP connections

active mode ipsvc:2-28

initiating ipsvc:2-28

passive mode ipsvc:2-28

IP domain names

configuring for digital certificates sec:6-7

IPFC

description ipsvc:5-4

logging facility sysmgnt:9-2

IP filters

contents sec:5-2

restricting IP traffic sec:5-1, sec:5-2

using IP-ACL Wizard (procedure) sec:5-6

IPS core dumps. See core dumps

IPsec

algorithms for authentication sec:7-6

configuring with FCIP Wizard (procedure) ipsvc:2-21

crypto IPv4-ACLssec:7-12to sec:7-26

default settings sec:7-21

digital certificate supportsec:7-7to sec:7-9

enabling with FCIP Wizard (procedure) sec:7-21

fabric setup requirements sec:7-4

global lifetime values sec:7-18

hardware compatibility sec:7-4

licensing requirements sec:7-19

maintenance sec:7-18

RFC implementations sec:7-1

terminology sec:7-5

transform sets sec:7-14

transforms for encryption sec:7-6

unsupported features sec:7-4

viewing configuration (procedure) sec:7-23

IP security. See IPsec

IPS modules

configuring CDP ipsvc:4-10

core dumps ipsvc:4-5

FCIP ipsvc:2-2

partial core dumps ipsvc:4-5

port modes ipsvc:4-4, ipsvc:2-2

software upgrades ipsvc:4-3

supported features ipsvc:4-1, ipsvc:4-2

IPS port mode

description ipsvc:4-4

IPS ports ipsvc:3-5

modes ipsvc:2-2

multiple connections ipsvc:3-26

SPAN sources sysmgnt:13-3

IP storage services

default parameters ipsvc:4-11

IP Storage services modules. See IPS modules

IPv4

default settings ipsvc:2-4

transitioning to IPv6 ipsvc:3-12

IPv4-ACLs

adding entries sec:5-7

applying to interfaces sec:5-9, sec:5-10

configuration guidelines sec:5-5

creating complex IPv4-ACLs (procedure) sec:5-7

creating with IP-ACL Wizard (procedure) sec:5-6

cryptosec:7-12to sec:7-26

crypto map entries sec:7-15

example configuration sec:5-11

reading dump logs sec:5-9

removing entries sec:5-8

IPv4 addresses

configuring fcalias members fab:5-7

configuring IPv6 and IPV6 protocol stacks ipsvc:3-14

IPv6 protocol stacks ipsvc:3-10

IPv4 default gateways

configuring ipsvc:5-9

configuring mgmt0 interfaces int:8-17

description ipsvc:5-3

static routes (tip) ipsvc:5-3

IPv4 default networks

description ipsvc:5-3

IPv4 static routing

description ipsvc:5-5

IPv6

address types ipsvc:3-3

configuring addressing ipsvc:3-11, ipsvc:3-13

configuring IPv4 and IPv6 addresses ipsvc:3-14

configuring management interfaces ipsvc:5-8

description??to ipsvc:3-11

dual IPv4 and IPv6 protocol stack applications, figure ipsvc:3-11

dual IPv4 and IPv6 protocol stacks ipsvc:3-10

dual IPv4 and IPv6 protocol stack technique, figure ipsvc:3-10

enabling routing ipsvc:3-11, ipsvc:3-13

enhancements over IPv4 ipsvc:3-1

ICMP ipsvc:3-6

neighbor discovery ipsvc:3-7

path MTU discovery ipsvc:3-7

router advertisement messages ipsvc:3-9

router discovery ipsvc:3-9

stateless autoconfiguration ipsvc:3-9

transitioning from IPv4 ipsvc:3-12

IPv6 addresses

configuring ipsvc:3-11, ipsvc:3-13

configuring fcalias members fab:5-2, fab:5-7

configuring IPv4 and IPV6 protocol stacks ipsvc:3-14

formats ipsvc:3-2

link-local type ipsvc:3-4

multicast type ipsvc:3-5

prefix format ipsvc:3-3

unicast type ipsvc:3-3

IPv6 enhancements over IPv4 ipsvc:3-1

IPv6 neighbor discovery

advertisement messages ipsvc:3-7

description ipsvc:3-7

neighbor solicitation message, figure ipsvc:3-8

solicitation messages ipsvc:3-7

IPv6 routing

enabling ipsvc:3-11, ipsvc:3-13

IQN

formats ipsvc:3-5

IQNs

formats ipsvc:3-5

ISCSI

enforcing access control ipsvc:3-13

iSCSI

access controlipsvc:3-11to ipsvc:3-13

add initiator to zone database ipsvc:3-42

advanced VSAN membershipadvanced VSAN membership ipsvc:3-11

checking for WWN conflicts ipsvc:3-40

configuring??to ipsvc:3-29

configuring AAA authentication ipsvc:3-43, ipsvc:3-44

configuring ACLs ipsvc:3-12

configuring VRRP ipsvc:3-27

creating virtual targets ipsvc:3-37

default parameters ipsvc:3-33

discovery phase ipsvc:3-13

drivers ipsvc:3-2

enabling ipsvc:3-2, ipsvc:3-35

error ipsvc:3-7

Fibre Channel targetsipsvc:3-4to ipsvc:3-62

Gigabit Ethernet ports ipsvc:4-4, ipsvc:2-2

GW flagiSCSI

gateway device ipsvc:3-8

HA with host without multi-path software ipsvc:3-24

initiator idle timeoutinitiator idle timeout

iSCSIinitiator idle timeout

configuring with Fabric Manager     1

initiator name ipsvc:3-45

initiator targets ipsvc:3-36

IPS module support ipsvc:4-2

IQNs ipsvc:3-6

login redirect ipsvc:3-18

LUN mapping for targetsipsvc:3-68to ??

MPS-14/2 module support ipsvc:4-2

multiple IPS ports ipsvc:3-26

PortChannel-based high availability ipsvc:3-28

PortChannel-based high availabilityEthernet PortChannel-based high availability ipsvc:3-28

protocol ipsvc:3-2

requests and responses ipsvc:3-4

restrict an initiator to a specific user name for CHAP authentication ipsvc:3-45

routing ipsvc:3-2

routing modes chartrouting modes chart for iSCSI ipsvc:3-16

session creation ipsvc:3-13

session limits ipsvc:3-7

statically mapped initiators ipsvc:3-17

tables in Fabric Manager ipsvc:3-40

targets in Device Manager ipsvc:3-37

transparent initiator mode ipsvc:3-7

transparent mode initiatoripsvc:3-64to ??

users with local authentication ipsvc:3-44

using iSCSI Wizard (procedure) ipsvc:3-36

VSAN membership ipsvc:3-11

VSAN membership example ipsvc:3-63

VSAN membership for iSCSI interfaces ipsvc:3-11, ipsvc:3-42

zone name ipsvc:3-36

iSCSI authentication

configuring ipsvc:3-13, ipsvc:3-19

configuring RADIUS (procedure) ipsvc:3-46

external RADIUS servers ipsvc:3-55

global override ipsvc:3-44

local authentication ipsvc:3-44

mechanisms ipsvc:3-44

restricting on initiators ipsvc:3-45

scenarios ipsvc:3-54

setup guidelines ipsvc:3-54

iSCSI-based access control ipsvc:3-11, ipsvc:3-12

iSCSI devices

example membership in VSANs ipsvc:3-63

iscsi-gw ipsvc:3-10

iSCSI high availability

configuringipsvc:3-23to ipsvc:3-29

iSCSI hosts

initiator identification ipsvc:3-6

iSCSI initiators

configuring static IP address mapping ipsvc:3-39

dynamic mapping ipsvc:3-9

making dynamic WWN mapping static ipsvc:3-40

proxy mode ipsvc:3-9

statically mapped (procedure) ipsvc:3-39

static mapping ipsvc:3-9

transparent mode ipsvc:3-7

WWN assignments ipsvc:3-8

iSCSI interfaces

configuringipsvc:3-6, ipsvc:3-6to ??

configuring listener ports ipsvc:3-14

configuring listener portsiSCSI

listener port ipsvc:3-14

configuring QoS ipsvc:3-46

configuring routing modeipsvc:3-15to ??

configuring routing modesiSCS

configuring routing modesrouting modes ipsvc:3-15

configuring TCP tuning parameters ipsvc:3-14

creating ipsvc:3-36

creatingiSCSI

creating interfaces ipsvc:3-36

SPAN sources sysmgnt:13-4

iSCSI LUs ipsvc:3-5

iSCSI protocol ipsvc:3-1

iSCSI server load balancing ipsvc:3-17

iSCSI Server Load Balancing. See iSLB

iSCSI sessions

authenticationiSCSI

session authenticationauthentication

iSCSI session     1

iSCSI targets

advertising ipsvc:3-38

dynamic importing ipsvc:3-5

dynamic mapping ipsvc:3-5

secondary access ipsvc:3-25

static importing ipsvc:3-6

static importingstatic mappingiSCSI targets

static mapping ipsvc:3-6

transparent failoveripsvc:3-23, ??to ipsvc:3-54

iSLB

activating zones ipsvc:3-18, ipsvc:3-49

auto-zoning ipsvc:3-22

CFS support sysmgnt:5-2

committing configuration changescommitting configuration changes

iSLB ipsvc:3-52

configuration distributionipsvc:3-21to ??, ipsvc:3-51

configuring ipsvc:3-47

configuring initiators and targets ipsvc:3-18, ipsvc:3-49

configuring VRRP ipsvc:3-51

configuring with Device Manager ipsvc:3-47

configuring zones ipsvc:3-18, ipsvc:3-49

default settings ipsvc:3-34

distributing configuration using CF ipsvc:3-21

enabling configuration distribution ipsvc:3-52

initiator WWN assignment ipsvc:3-47

load balancing algorithmipsvc:3-21to ??

maximum initiators ipsvc:3-32

static initiator configurationinitiator configuration

static iSLB ipsvc:3-17

VSAN membership ipsvc:3-48

zone set activation failed ipsvc:3-50

iSlb

default settings ipsvc:3-34

iSLB auto-zone feature ipsvc:3-33

iSLB initiators ipsvc:3-18

assigning WWNs ipsvc:3-18

configuring??to ipsvc:3-19

VSAN membership ipsvc:3-48

iSLB initiator targets

description ipsvc:3-18, ipsvc:3-49

iSLB sessions

maximum per IPS portiSLB

maximum sessions per IPS port ipsvc:3-32

iSLB with CFS distribution ipsvc:3-32

ISLs

PortChannel links int:2-2

iSMS servers

enabling ipsvc:3-58

iSNS

CFS support sysmgnt:5-2

client registration ipsvc:3-31

configuring ipsvc:3-31

configuring servers??toipsvc:3-31, ipsvc:3-57to ??

description ipsvc:3-29

ESI ipsvc:3-59

iSNS client

description ipsvc:3-30

iSNS clients

creating profiles ipsvc:3-56

iSNS cloud discovery

CFS distribution ipsvc:3-61

description ipsvc:3-31

iSNS profiles

creating ipsvc:3-56

iSNS servers

configuration distribution ipsvc:3-58

description ipsvc:3-30

enabling ipsvc:3-58

isolated VSANs

description fab:4-7

displaying membership fab:4-14

IVR

activating topologies ivr:3-12

AF IDs ivr:3-6

basic configuration ivr:1-1

basic configuration task list ivr:1-14

border switch ivr:1-4

border switch, guidelines ivr:3-6

border switch configuration guidelines ivr:3-6

border switches ivr:1-4

configuration ivr:3-11

configuration limits ivr:1-4

configuration task lists ivr:3-9, ivr:1-14

configuring

advanced ivr:3-8

basic ivr:1-14

configuring logging levels ivr:1-22

configuring without IVR NAT

guidelines ivr:3-5

current VSANs ivr:1-3

database merge guidelines ivr:1-11

databases ivr:1-5

default settings ivr:1-13

default zone policy ivr:1-7

domain ID configuration guidelines ivr:3-5

domain ID guidelines ivr:3-5

edge switch ivr:1-4

edge switches ivr:1-4

edge VSANs ivr:1-3

enabling ivr:1-16

enabling distribution with CFS ivr:1-16

features ivr:1-2

Fibre Channel header modifications ivr:1-5

interoperability ivr:1-8

logging ivr:1-22

native VSANs ivr:1-3

paths ivr:1-3

persistent FC IDs ivr:3-13

read-only zoning ivr:3-15

SDV limitations fab:2-6

service groupsivr:3-1to ??

terminology ivr:1-3

transit VSAN configuration guidelines ivr:3-6

transit VSANs ivr:1-4

virtual domains ivr:1-6

VSAN topologies ivr:1-6

zone communication ivr:1-7

zone configuration guidelines ivr:3-8

zonesivr:1-3, ivr:1-7to ??

zone sets ivr:1-3

Zone Wizard ivr:1-15

IVR CFS

region ID ivr:3-14

IVR databases

active ivr:1-5

configured ivr:1-5

merge guidelines ivr:1-11

pending ivr:1-5

IVR logging

configuring levels ivr:1-22

IVR manual configuration

guidelines ivr:3-6

IVR NAT

border switch, guidelines ivr:1-10

description ivr:1-9

enabling auto-discovery ivr:1-17

load balancing ivr:1-9

modifying ivr:1-17

requirements ivr:1-9

transit VSANs, guidelines ivr:1-10

IVR persistent FC IDs

configuring ivr:3-13

persistent ivr:3-13

IVR service groups

activation ivr:3-2

characteristics ivr:3-1

configuring ivr:3-9

default ivr:3-2

description ivr:1-4

IVR configuration guidelines ivr:3-4

IVR topologies

activating a manually configured topology ivr:3-12

CFS support sysmgnt:5-2

clearing manual entries ivr:3-12

configuring manually ivr:3-11

enabling automatic discovery ivr:1-17

migrating from IVR auto topology mode to IVR manual topology mode ivr:3-12

recovering ivr:1-23

IVR virtual domains

clearing ivr:1-22

description ivr:1-6

IVR without NAT

configuring ivr:3-11

IVR Zone

IVR CFS Regions ivr:1-19

IVR zones

activating with force option ivr:1-20

advanced

description ivr:3-2

automatic creation ivr:1-7

configuringivr:1-18to ivr:1-19

configuring LUNs ivr:3-13

configuring QoS attributes ivr:3-14

configuring with IVR Zone Wizard ivr:1-15

description ivr:1-3, ivr:1-7

differences with zones (table) ivr:1-7

maximum number of members ivr:1-4

maximum number of zones ivr:1-4

recovering the full database ivr:1-23

renaming ivr:3-14

IVR zone sets

activating ivr:1-21

advanced configuration

description ivr:3-2

configuringivr:1-18to ivr:1-22

deactivating ivr:1-21

description ivr:1-3

maximum number ivr:1-4

renaming ivr:3-14

IVR Zone Wizard ivr:1-15

J

jitter

configuring estimated maximum in FCIP profiles ipsvc:2-26

jobs

command scheduler sysmgnt:10-1

jumbo frames. See MTUs

K

keepalive timeouts

configuring in FCIP profiles ipsvc:2-24

L

latency

forwarding ipsvc:3-15

LEDs

beacon mode states int:8-11

speed int:8-11

licenses

extended BB_credits int:5-16, int:5-17

link costs

configuring for FSPF fab:8-11

description fab:8-3

link failures

recovering qos:2-1

Link Incident Records. See LIRs

link-local addresses

description ipsvc:3-4

format, figure ipsvc:3-5

link redundancy

Ethernet PortChannel aggregation ipsvc:4-9

LIRs

description fab:6-14

load balancing ipsvc:3-17, ipsvc:3-18

attributes fab:4-9

attributes for VSANs fab:4-6

configuring fab:4-12

description int:2-4, fab:4-9

FSPF (example) ipsvc:2-6

PortChannels int:2-2

PortChannels (example) ipsvc:2-5

weighted ipsvc:3-49

load metric ipsvc:3-49

lock the fabric ipsvc:3-22

log files

copying periodically sysmgnt:14-6

logging

default settings sysmgnt:9-7

disabling sysmgnt:9-8

enabling sysmgnt:9-8

message severity levels sysmgnt:9-3

logical unit numbers. See LUNs

logins

SSH sec:4-5

Telnet sec:4-5

logs

RMON sysmgnt:11-8

SNMP events sysmgnt:12-13

loopback tests

configuring frame lengths sysmgnt:14-3

configuring frequency sysmgnt:14-3

external sysmgnt:14-6, sysmgnt:14-7

LUN ipsvc:3-5

trespass for storage port failover ipsvc:3-54

LUN mapping ipsvc:3-25

iSCSIipsvc:3-68to ??

LUNs

explicit access control ipsvc:3-9

mapping and assignment ipsvc:3-10

LUN zoning

configuring fab:5-33

description fab:5-10

LUs ipsvc:3-4, ipsvc:3-5

M

MAC addresses

configuring secondary fab:6-10

mainframes

FICON parameters fab:6-25

VSAN clock fab:6-26

management interfaces

configuring ipsvc:5-8, int:8-17, int:8-39

configuring for IPv6 ipsvc:5-8

default settings sec:3-7, sec:4-16, sec:6-6, sec:8-6, sec:7-21, sec:9-9, sec:10-3, ipsvc:2-19, ipsvc:4-11, ipsvc:5-8, ipsvc:2-4, ipsvc:3-13, ipsvc:4-4, int:7-20, int:8-19, int:2-16, int:3-10, fab:2-6, fab:3-5, fab:6-20, fab:7-5, fab:8-8, fab:2-7, fab:4-9, fab:5-15, fab:6-7

displaying information int:8-57

features int:8-17

maximum retransmissions

configuring in FCIP profiles ipsvc:2-25

McData

native interop mode fab:6-6

MD5 authentication

IKE sec:7-7

IPsec sec:7-6

VRRP ipsvc:5-13

merged fabrics

autoreconfigured sysmgnt:6-4

merge status conflictsiSLB

merge status conflictsCFS

merge status conflicts ipsvc:3-23

Message Authentication Code using AES. See AES-XCBC-MAC

Message Digest 5. See MD5 authentication

mgmt0 interfaces

configuring int:8-17, int:8-39

default settings sec:3-7, sec:4-16, sec:6-6, sec:8-6, sec:7-21, sec:9-9, sec:10-3, ipsvc:2-19, ipsvc:4-11, ipsvc:5-8, ipsvc:2-4, ipsvc:3-13, ipsvc:4-4, int:7-20, int:8-19, int:2-16, int:3-10, fab:2-6, fab:3-5, fab:6-20, fab:7-5, fab:8-8, fab:2-7, fab:4-9, fab:5-15, fab:6-7

features int:8-17

local IPv4 routing ipsvc:5-4

Microsoft Challenge Handshake Authentication Protocol. See MSCHAP

minimum retransmit timeouts

configuring in FCIP profiles ipsvc:2-24

modules

configuring message logging sysmgnt:9-9

testing health sysmgnt:14-4

monitoring traffic

RSPAN sysmgnt:13-18

SPAN sysmgnt:13-15

monitor sessions

message logging severity levels sysmgnt:9-8

MPS-14/2 modules ipsvc:3-1, ipsvc:3-2, ipsvc:3-3, ipsvc:3-10, ipsvc:3-13, ipsvc:3-36

configuring extended BB_credits int:5-17

FCIP ipsvc:2-2

port modes ipsvc:4-4, ipsvc:2-2

software upgrades ipsvc:4-4

supported features ipsvc:4-1, ipsvc:4-2

MSCHAP

description sec:4-14

MTU frame sizes

configuring Gigabit Ethernet interfaces ipsvc:4-6

MTUs

configuring frame sizes ipsvc:2-5

configuring size

path discovery for IPv6 ipsvc:3-7

multicast addresses

IPv6 alternative to broadcast addresses ipsvc:3-6

IPv6 format, figure ipsvc:3-5

IPv6 solicited-node format, figure ipsvc:3-6

multicast root switches

configuring fab:8-13

description fab:8-6

multi-path software example ipsvc:3-24

multiple VSANs

configuring ipsvc:5-11

Multiprotocol Services modules. See MPS-14/2 modules

mutual CHAP authentication

configuring for iSCSI ipsvc:3-45

configuring for iSLB ipsvc:3-51

configuring for iSLBI ipsvc:3-51

N

name servers

displaying database entries fab:7-2

interoperability fab:6-7

LUN information fab:3-1

proxy feature fab:7-2

registering proxies fab:7-2

NAT. See IVR NAT

native VSANs

description ivr:1-3

network administrators

additional roles sec:4-4

permissions sec:4-4

network operators

permissions sec:4-4

NL ports

hard zoning fab:5-7

interface modes int:8-6

zone enforcement fab:5-7

node world wide names. See nWWNs

None authentication ipsvc:3-13

nonparticipating codes

description int:8-9

NPIV

description int:9-2

enabling int:9-10

NP links int:9-5

N port identifier virtualization. See NPIV

N ports

hard zoning fab:5-7

zone enforcement fab:5-7

zone membership fab:5-2

See also Nx ports

NL ports

See also Nx ports

NP-ports int:9-5

NPV, configuring int:9-10

NPV mode int:9-4

NTP

CFS support sysmgnt:5-2

logging facility sysmgnt:9-2

time-stamp option ipsvc:2-28

nWWNs

DPVM fab:3-1

Nx ports

FCS support sysmgnt:8-1

See also N ports; NL ports

O

OBFL

description sysmgnt:14-5

OHMS

description sysmgnt:14-2

interpreting current status sysmgnt:14-5

on-board failure logging. See OBFL

Online Certificate Status Protocol. See OCSP

operational states

configuring on Fibre Channel interfaces int:8-22

description int:8-6

OSCP

support sec:6-5

out-of-service interfaces

description int:7-11

overlay VSANs

configuring ipsvc:5-10

description ipsvc:5-5

oversubscription

disabling restrictions int:7-33

enabling restrictions int:7-36

Generation 2 switching modules int:7-12

ratios int:7-12

P

packets

discarding in FCIP ipsvc:2-28

pass-thru routing mode ipsvc:3-15, ipsvc:3-16

passwords

DHCHAP sec:8-4, sec:8-5

strong characteristics sec:3-6

path MTUs. See PMTUs

PDU ipsvc:3-15

performance buffers

configuring int:5-22

description int:5-2

persistent FC IDs

configuring sysmgnt:6-8, ivr:3-13

description sysmgnt:6-8

enabling sysmgnt:6-17

purging sysmgnt:6-9

PKI

enrollment support sec:6-4

PLOGI

name server fab:7-2

PMTUs

configuring in FCIP profiles ipsvc:2-25

port addresses

FICON fab:6-10

PortChannel

interfaces ipsvc:3-38

subinterfaces ipsvc:3-38

PortChannel modes

description int:2-6

PortChannel Protocol

autocreation int:2-12

configuring autocreation int:2-22

converting autocreated groups to manually configured int:2-12

creating channel group int:2-10

description int:2-9

enabling autocreation int:2-22

PortChannels

adding interfaces int:2-8, int:2-20

administratively down int:8-9

binding to FICON port numbers fab:6-27

comparison with trunking int:2-3

compatibility checks int:2-8

compatibility with DHCHAP sec:8-3

configuring for FCIP high availability ipsvc:2-5

creating int:2-18

default settings int:2-16

deleting int:2-7

deleting interfaces int:2-9

examples int:2-2

FICON support fab:6-5

forcing interface additions int:2-9, int:2-21

Generation 2 switching module interfaces int:7-18

in-order guarantee fab:8-7

interface states int:2-9

interoperability fab:6-6

IQN formats ipsvc:3-5

link changes fab:8-7

link failures fab:8-16

load balancing int:2-4

load balancing (example) ipsvc:2-5

logging facility sysmgnt:9-2

member combinations ipsvc:4-9

misconfiguration error detection int:2-13

redundancy ipsvc:2-8

reserving ports for FICON fab:6-11

SPAN sources sysmgnt:13-4

verifying configurationsint:2-23to int:2-26

port groups

assigning extended BB_credits int:5-17

description int:7-3

Generation 2 Fibre Channel switching modules int:7-3

Generation 3 Fibre Channel switching modules int:7-7

port indexes

description int:7-15

port modes

auto int:8-6

descriptionint:8-2to int:8-6

IPS ipsvc:4-4, ipsvc:2-2

port numbers. See FICON port numbers

port rate limiting

configuring qos:11-8

description qos:11-8

hardware restrictions qos:11-8

port rate modes

configuring int:7-27

dedicated int:7-6

description int:7-4

oversubscribed int:7-7

shared int:7-7

See also rate modes

ports

virtual E ipsvc:2-2

VSAN membership fab:4-7

port security

activating sec:9-13

activation sec:9-3

activation rejection sec:9-3

auto-learning sec:9-2

CFS support sysmgnt:5-2

cleaning up databases sec:9-20

compatibility with DHCHAP sec:8-3

configuring CFS distribution??to sec:9-7

copying databases sec:9-19

database interactions sec:9-7

database merge guidelines sec:9-9

data scenarios sec:9-8

deactivating sec:9-13

default settings sec:9-9

deleting databases sec:9-20

deleting entries from database (procedure) sec:9-17

disabling sec:9-13

displaying settings (procedure) sec:9-21

displaying statistics (procedure) sec:9-21

enabling sec:9-13

enforcement mechanisms sec:9-2

fabric binding comparison sec:10-1

forcing activation sec:9-14

manual configuration guidelines sec:9-11

WWN identification sec:9-5

port security auto-learning

description sec:9-2

device authorization sec:9-4

disabling sec:9-16

distributing configuration sec:9-6

enabling sec:9-3

guidelines for configuring with CFS sec:9-10

guidelines for configuring without CFS sec:9-10

port security databases

cleaning up sec:9-20

copying sec:9-19

copying active to config (procedure) sec:9-15

deleting sec:9-20

interactions sec:9-7

manual configuration guidelines sec:9-11

merge guidelines sec:9-9

reactivating sec:9-14

scenarios sec:9-8

port speed group

configuring int:8-25

port speeds

configuring int:8-10, int:8-24

configuring on Generation 2 switching module interfaces int:7-26

displaying configuration int:7-26

port swapping. See FICON port swapping

port tracking

default settings qos:2-2

description qos:2-1

enabling qos:2-3

guidelines qos:2-2

monitoring ports in a VSAN qos:2-6

multiple ports qos:2-5

shutting down ports forcefully qos:2-7

port world wide names. See pWWNs

preshared keys

RADIUS sec:4-8

TACACS+ sec:4-11

principal switches

assigning domain ID sysmgnt:6-6

private devices

TL ports int:8-53

promiscuous mode

configuring Gigabit Ethernet interfaces ipsvc:4-6, ipsvc:2-6

protocol ipsvc:3-1

protocols

VRRP ipsvc:3-5

proxies

registering for name servers fab:7-2

proxy initiator

configuringiSCSI

configuring proxy initiator ipsvc:3-41

proxy initiator mode ipsvc:3-7, ipsvc:3-12

configuring ipsvc:3-10

zoning ipsvc:3-41

proxy initiator modeiSCSI

proxy initiator mode ipsvc:3-9

Public Key Infrastructure. See PKI

Pv6 address formats ipsvc:3-11

pWWNs

configuring fcalias members fab:5-6

converting dynamic to static ipsvc:3-40

DPVM fab:3-1

zone membership fab:5-2

Q

QoS

class maps qos:11-5

comparison with VSANs qos:11-4

control traffic support qos:11-2

creating class maps qos:11-5

data traffic supportqos:11-3to qos:11-7

description qos:11-1

DSCP value ipsvc:2-11

DWRR queues qos:11-6

enabling control traffic qos:11-2

example data traffic configuration qos:11-7

logging facilities sysmgnt:9-2

port rate limiting qos:11-8

service policies qos:11-5, qos:11-6

QoS values

configuring ipsvc:3-46

R

RADIUS ipsvc:3-55

AAA authentication ipsvc:3-13, ipsvc:3-19

AAA protocols sec:4-1

CFS merge guidelines sec:4-15

CFS support sysmgnt:5-2

clearing configuration distribution sessions sec:4-29

configuring an iSCSI RADIUS serveriSCSI

configuring a RADIUS server ipsvc:3-46

configuring Cisco ACSsec:4-30to sec:4-34

configuring test idle timer sec:4-8

configuring test user name sec:4-8

default settings sec:4-16

description sec:4-16

discarding configuration distribution changes sec:4-28

enabling configuration distribution sec:4-27

setting preshared keys sec:4-8

specifying time-out sec:4-19

starting a distribution session sec:4-13

rate modes

configuring on Generation 2 switching module interfaces int:7-27

verifying configuration int:7-28

See also port rate modes

RCFs

description sysmgnt:6-3

incoming sysmgnt:6-4

rejecting incoming sysmgnt:6-13

read-only zones

configuration guidelines fab:5-15

configuring fab:5-33

description fab:5-11

reason codes

description int:8-7

receive buffer groups. See buffer groups

receive data field sizes

configuring int:5-20

reconfigure fabric frames. See RCFs

recovery

from powered-down state int:7-18

redundancy

Ethernet PortChannels ipsvc:2-7, ipsvc:2-8

Fibre Channel PortChannels ipsvc:2-8

VRRP ipsvc:2-7

VSANs fab:4-5

redundancy states

value descriptions ha:5-3

redundant physical links

example (figure) fab:8-16

Registered Link Incident Reports. See RLIRs

Registered State Change Notifications. See RSCNs

Remote SPAN. See RSPAN

retransmitting intervals

configuring for FSPF fab:8-12

description fab:8-4

RLIRs

description fab:6-14

displaying information (procedure) fab:6-35

specifying preferred host fab:6-29

RMON

alarms sysmgnt:11-1

configuring using Threshold Manager sysmgnt:11-2

default settings sysmgnt:11-3

defining an event (procedure) sysmgnt:11-7

enabling alarms sysmgnt:11-2

enabling alarms (procedure) sysmgnt:11-5

events sysmgnt:11-1

setting alarms (procedure) sysmgnt:11-3, sysmgnt:11-4, sysmgnt:11-5

viewing alarms (procedure) sysmgnt:11-8

viewing logs (procedure) sysmgnt:11-8

role databases

disabling distribution sec:3-11

enabling distribution sec:3-11

viewing with Fabric Manager sec:3-17

roles

CFS support sysmgnt:5-2

configuring rules sec:3-2

default permissions sec:4-4

default setting sec:3-8

deleting (procedure) sec:3-9

distributing configurations??to sec:3-18

user profiles sec:4-4

See also command roles

route costs

computing fab:8-3

router discovery

IPv6 ipsvc:3-9

routing

multicast fab:8-6

See also broadcast routing

See also IP routing

RSA key-pairs

deleting sec:6-15

description sec:6-3

exporting sec:6-5, sec:6-13

generating sec:6-7

importing sec:6-5, sec:6-13

multiple sec:6-4

rsa key pairs

generating sec:3-14

RSCNs ipsvc:3-39

default settings fab:7-5

description fab:7-3

displaying information fab:7-9

logging facility sysmgnt:9-2

multiple port IDs fab:7-3

suppressing domain format SW-RSCNs fab:7-6

RSCN timers

CFS support sysmgnt:5-2

configuration distribution using CFSfab:7-4to ??

configuring fab:7-7

RSPAN

advantages sysmgnt:13-10

configuring sysmgnt:13-18

default settings sysmgnt:13-14

description sysmgnt:13-9

explicit paths sysmgnt:13-12

monitoring traffic sysmgnt:13-18

monitoring traffic (example)sysmgnt:13-19to sysmgnt:13-22

tunnels sysmgnt:13-10

rules

configuring sec:3-2

runtime checks

static routes fab:8-5

S

SACKs

configuring in FCIP profiles ipsvc:2-25

SAN extension tuner

configuring ipsvc:4-3

data patterns ipsvc:4-3

tuning guidelines ipsvc:4-2

SAs

establishing between IPsec peers sec:7-16

lifetime negotiations sec:7-16

refreshing sec:7-26

setting lifetime sec:7-28

scalability

VSANs fab:4-5

scheduler. See command scheduler

schedules

command scheduler sysmgnt:10-1

specifyingsysmgnt:10-3to ??

SCSI

displaying LUN discovery results fab:3-3

routing requests ipsvc:3-2

SCSI flow configuration clients

description intsvc:2-3, intsvc:3-3

SCSI flow data path support

description intsvc:2-3, intsvc:3-3

SCSI flow managers

description intsvc:2-3, intsvc:3-3

SCSI flow services

CFS support sysmgnt:5-2

configuring (procedure) intsvc:2-5

default settings intsvc:2-4, intsvc:3-3

functional architecture (figure) intsvc:2-2

SCSI flow configuration clients intsvc:2-3, intsvc:3-3

SCSI flow data path support intsvc:2-3, intsvc:3-3

SCSI flow managers intsvc:2-3, intsvc:3-3

SCSI flow statistics

default settings intsvc:2-4, intsvc:3-3

enabling intsvc:3-4

SCSI LUNs

customized discovery fab:3-2

discovering targets intsvc:5-2, intsvc:2-3, intsvc:3-3, fab:3-1

displaying information fab:3-3

starting discoveries fab:3-2

SD port mode

description int:8-5

interface modes int:8-5

SD ports

bidirectional traffic sysmgnt:13-7

characteristics sysmgnt:13-5

configuring int:8-22

configuring for SPAN monitoring sysmgnt:13-15

monitoring bidirectional traffic sysmgnt:13-7

RSPAN sysmgnt:13-9

SDV

IVR limitations fab:2-6

secondary MAC addresses

configuring fab:6-10

Secure Hash Algorithm. See SHA-1

security

accounting sec:4-4

managing on the switch sec:4-1

security associations. See SAs

security control

local sec:4-2

remote sec:4-2, sec:4-17

remote AAA servers sec:4-16

security parameter index. See SPI

selective acknowledgments. See SACKs

serial IDs

description sysmgnt:4-12

service policies

defining qos:11-5

enforcement qos:11-6

SFPs

displaying transmitter types int:8-50, int:8-53

transmitter types int:8-12

SHA-1

IKE sec:7-7

IPsec sec:7-6

shared rate mode

description int:7-7

migrating from dedicated rate mode int:7-22

migrating to dedicated rate mode int:7-22

oversubscription int:7-12

site IDs

description sysmgnt:4-11

small computer system interface. See SCSI

SMTP

assigning contact names sysmgnt:4-21

SNMP

access control sysmgnt:12-2

access groups sysmgnt:12-4

adding communities sysmgnt:12-8

assigning contact sysmgnt:12-6

assigning location sysmgnt:12-6

configuring event security sysmgnt:12-12

configuring event security (procedure) sysmgnt:12-13

configuring LinkUp/LinkDown notifications sysmgnt:12-5

configuring notification target users sysmgnt:12-12

creating roles sec:3-4

creating users sysmgnt:12-4

default settings sysmgnt:12-6

deleting communities sysmgnt:12-8

deleting community strings (procedure) sysmgnt:12-8

enabling SNMP notifications sysmgnt:12-10

encryption-based privacy sysmgnt:12-4

FICON control fab:6-26

group-based access sysmgnt:12-4

mapping CLI operations sec:3-5

modifying users sysmgnt:12-4

read-only access sysmgnt:12-8

read-write access sysmgnt:12-8

security features sec:4-3

server contact name sysmgnt:4-19

users with multiple roles (procedure) sysmgnt:12-7

user synchronization with CLI sysmgnt:12-3

Version 3 security features sysmgnt:12-2

versions supported sysmgnt:12-1

viewing event log sysmgnt:12-13

See also SNMPv1; SNMPv2c; SNMPv3

SNMP manager

FCS sysmgnt:8-2

SNMPv1

community strings sysmgnt:12-2

description sysmgnt:12-2

See also SNMP

SNMPv2

community strings sysmgnt:12-2

SNMPv2c

configuring notifications sysmgnt:12-9

description sysmgnt:12-2

See also SNMP

SNMPv3

assigning multiple roles sysmgnt:12-7

CLI user managementSNMPv3

AAA integration sysmgnt:12-3

configuring notifications sysmgnt:12-10

description sysmgnt:12-2

enforcing message encryption sysmgnt:12-7

restricting switch access sysmgnt:12-3

security features sysmgnt:12-2

specifying cisco-av-pair sec:4-10

See also SNMP sysmgnt:12-2

software images

synchronizing ha:5-2

soft zoning

description fab:5-7

See also zoning

source IDs

Call Home event format sysmgnt:4-12

exchange based int:2-5

flow based int:2-4

in-order delivery fab:8-6

path selection fab:4-9

SPAN

configuration guidelines sysmgnt:13-12

configuringsysmgnt:13-15to ??

configuring Fibre Channel analyzers sysmgnt:13-6

configuring sessions sysmgnt:13-5

default settings sysmgnt:13-14

description sysmgnt:13-1

egress sources sysmgnt:13-3

FC analyzers sysmgnt:13-5

filters sysmgnt:13-4

monitoring traffic sysmgnt:13-1, sysmgnt:13-15

SD ports sysmgnt:13-5

sessions sysmgnt:13-4

sources sysmgnt:13-2, sysmgnt:13-4

sources for monitoring sysmgnt:13-2

VSAN sources sysmgnt:13-4

SPAN destination port mode. See SD port mode

SPAN filters

description sysmgnt:13-4

guidelines sysmgnt:13-13

SPAN sessions

deleting using Device Manager sysmgnt:13-17

description sysmgnt:13-4

VSAN filters sysmgnt:13-5

SPAN sources

editing with Device Manager sysmgnt:13-17

egress sysmgnt:13-3

ingress sysmgnt:13-3

interface types sysmgnt:13-3

IPS ports sysmgnt:13-3

VSANs configuration guidelines sysmgnt:13-13

SPAN tunnel port mode. See ST port mode

SPF

computational hold times fab:8-3

SPI

configuring virtual routers ipsvc:5-13

SSH

default service sec:3-14

description sec:3-6

digital certificate authentication sec:3-6

enabling sec:3-16

generating server key-pairs sec:3-14

logins sec:4-5

overwriting server key-pairs sec:3-15

SSH key pairs

overwriting sec:3-15

SSH sessions

message logging sysmgnt:9-8

SSMs

disabling Intelligent Storage Services (procedure) intsvc:2-5

SCSI flow servicesintsvc:2-1tointsvc:2-4, ??to intsvc:3-3

SCSI flow statisticsintsvc:2-1tointsvc:2-4, ??to intsvc:3-3

standby supervisor modules

monitoring ha:1-1

synchronizing ha:5-2

statically imported iSCSI targets ipsvc:3-25

static mapped iSCSI targetiSCSI

static mapped target ipsvc:3-13

static mapping ipsvc:3-18

static routes

runtime checks fab:8-5

static WWN mapping ipsvc:3-12

store-and-forward routing mode ipsvc:3-15, ipsvc:3-16

ST port mode

description int:8-5

interface modes int:8-5

limitations int:8-5

ST ports

interface modes int:8-5

RSPAN sysmgnt:13-9

RSPAN characteristics sysmgnt:13-11

subnet masks

configuring mgmt0 interfaces int:8-17

subnets

requirements ipsvc:4-7, ipsvc:2-3

supervisor modules

high availability ha:1-1

manual switchovers ha:5-2

standby state ha:5-4

state descriptions ha:5-3

switchover mechanisms ha:5-1

synchronizing ha:5-2

Switched Port Analyzer. See SPAN

switches

internal states ha:5-4

switch management

in-band ipsvc:5-4

switchovers

guidelines ha:5-2

initiating manually ha:5-2

VRRP ipsvc:2-7

switch ports

configuring attribute default values int:8-29

switch priorities

configuring sysmgnt:6-12

default sysmgnt:6-12

description sysmgnt:6-4

switch security

default settings sec:3-7, sec:4-16

syslog

CFS support sysmgnt:5-2

configuration distribution sysmgnt:9-6

syslog servers

verifying using Fabric Manager Web Services sysmgnt:9-11

system health

clearing error reports sysmgnt:14-4

configuring failure actions sysmgnt:14-3

default settings sysmgnt:14-6

interpreting current status sysmgnt:14-5

testing modules sysmgnt:14-4

test run requirements sysmgnt:14-4

system messages

configuring logging sysmgnt:9-7

configuring logging servers sysmgnt:9-10

default settings sysmgnt:9-7

displaying information??to sysmgnt:9-7

logging server sysmgnt:9-1

monitoring sysmgnt:9-1

severity levels sysmgnt:9-3

viewing from Device Manager sysmgnt:9-12

viewing from Fabric Manager Web Server sysmgnt:9-12

system processes

displaying sysmgnt:14-8

T

TACACS+

AAA authentication ipsvc:3-19

AAA protocols sec:4-1

CFS merge guidelines sec:4-15

CFS support sysmgnt:5-2

clearing configuration distribution sessions sec:4-29

configuring Cisco ACSsec:4-30to sec:4-34

default settings sec:4-16

description sec:4-11

discarding configuration distribution changes sec:4-28

displaying server statistics sec:4-35

enabling configuration distribution sec:4-27

global keys sec:4-11

setting default server encryption sec:4-24

setting default server timeout sec:4-24

setting preshared key sec:4-11

specifying server at login sec:4-13

starting a distribution session sec:4-13

validating sec:4-12

tape acceleration

FICONfab:6-16to fab:6-31

target discovery ipsvc:3-31

TCP connections

FCIP profiles ipsvc:2-4

TCP parameters

configuring in FCIP profilesipsvc:2-24to ??

TCP ports

IPv4-ACLs sec:5-3

TCP tuning parameters ipsvc:3-14

Telnet

enabling sec:3-16

logins sec:4-5

Telnet sessions

message logging sysmgnt:9-8

TE port mode

classes of service int:8-4

description int:8-4

TE ports

fabric binding checking sec:10-2

FCS support sysmgnt:8-1, sysmgnt:8-2

FSPF topologies fab:8-1

interoperability fab:6-6

recovering from link isolations fab:5-8

SPAN sources sysmgnt:13-3

trunking restrictions int:3-3

TF port mode

classes of service int:8-5

description int:8-5

Threshold Manager

configuring RMON sysmgnt:11-2

time out values. See TOVs

timestamps

FICON host control fab:6-25

TL port mode

classes of service int:8-4

description int:8-4

TL ports

ALPA caches int:8-14

configuring int:8-22, int:8-29

description int:8-13

displaying information int:8-53

FCS sysmgnt:8-1, sysmgnt:8-2

FCS support sysmgnt:8-1, sysmgnt:8-2

logging facility sysmgnt:9-2

private devices int:8-53

SPAN sources sysmgnt:13-3

virtual devices int:8-54

TOVs

configuring across all VSANs fab:6-8

configuring for a VSAN fab:6-9

default settings fab:6-7

interoperability fab:6-6

ranges fab:6-2

tracked ports

binding operationally qos:2-4

traffic isolation

VSANs fab:4-5

transform sets

description sec:7-14

transient failure ipsvc:3-39

transit VSANs

configuration guidelines ivr:1-10

description ivr:3-11, ivr:1-4

IVR configuration guidelines ivr:3-6

translative loop port mode. See TL port mode

transparent initiator mode ipsvc:3-7

transparent initiator modeiSCSI

transparent initiator mode ipsvc:3-9

Triple DES. See 3DEC encryption

troubleshooting

CTC ipsvc:2-23

trunk-allowed VSAN lists

descriptionint:3-5to int:3-7

trunking

comparison with PortChannels int:2-3

configuration guidelines int:3-10

configuring modes int:3-4

interoperability fab:6-6

link state ipsvc:2-23, int:3-4

merging traffic int:3-10

restrictions int:3-3, int:3-7

trunking E port mode. See TE port mode

trunking F port mode. See TF port mode

trunking mode

FCIP interface ipsvc:2-5

trunking ports

associated with VSANs fab:4-7

trunking protocol

default settings int:3-11

default state int:3-4

detecting port isolation int:3-10

disabling int:3-11

enabling int:3-11

trunk mode

administrative default int:8-29

configuring int:3-4, int:3-12

status int:3-4

trunk ports

displaying information int:3-14

trust points

creating sec:6-8

description sec:6-2

multiple sec:6-3

saving configuration across reboots sec:6-12

TrustSec FC Link Encryption sec:11-1

enabling sec:11-3

ESP Settings sec:11-4

ESP Wizard sec:11-5

Security Association Parameters sec:11-3

Security Associations sec:11-3

Supported Modules sec:11-1

Terminology sec:11-2

U

UDP ports

IPv4-ACLs sec:5-3

unique area FC IDs

configuring sysmgnt:6-18

description sysmgnt:6-9

user accounts

configuring??to sec:3-18

displaying information sec:3-18

password characteristics sec:3-6

user IDs

authentication sec:4-3

user profiles

role information sec:4-4

users

CFS support sysmgnt:5-2

configuring sec:3-12

deleting (procedure) sec:3-13

description sec:3-5

displaying account information sec:3-18

SNMP support sysmgnt:12-4

V

vendor-specific attributes. See VSAs

VE ports

description ipsvc:2-2

FCIP ipsvc:2-2

virtual devices

TL ports int:8-54

virtual E ports. See VE ports

virtual FC interface

assigning to VSANs int:4-6

configuring int:4-2

Device Manager int:4-4

Fabric Manager int:4-3

creating

Device Manager int:4-12

default settings int:4-13

deleting int:4-13

limitations int:4-1

overview int:4-1

virtual Fibre Channel host ipsvc:3-3

virtual interface

configuring

FCoE Configuration Wizard int:4-6

limitations fab:5-1

virtual ISLs

description ipsvc:2-2

Virtual LANs. See VLANs

virtual LANs. See VLANs

virtual router IDs. See VR IDs

Virtual Router Redundancy Protocol. See VRRP

Virtual Router Redundancy Protocolprotocols

Virtual Router Redundancy ipsvc:3-17

virtual routers

adding primary IP addresses ipsvc:5-13

authentication ipsvc:5-13

default settings ipsvc:5-8

VLANs

configuring on Gigabit Ethernet subinterfaces ipsvc:2-6

description ipsvc:4-6, ipsvc:2-2

mapping to VSANs int:4-5

using Device Manager int:4-5

using Fabric Manager int:4-5

VR IDs

description ipsvc:5-5

mapping ipsvc:5-5

VRRP ipsvc:3-17

algorithm for selecting Gigabit Ethernet interfacesipsvc:3-21to ??

backup switches ipsvc:5-6

configuring for iSLB ipsvc:3-51

default settings ipsvc:5-8

description ipsvc:4-8, ipsvc:5-5

group members ipsvc:4-8

IQN formats ipsvc:3-5

iSCSI parameter change impact ipsvc:3-21

iSLBipsvc:3-19to ??

logging facility sysmgnt:9-3

master switches ipsvc:5-6

MD5 authentication ipsvc:5-13

primary IP address ipsvc:5-13

security authentication ipsvc:5-13

simple text authentication ipsvc:5-13

VRRP group ipsvc:3-42

VRRP-I f iSCSI login redirect ipsvc:3-18

VSAN IDs

allowed list int:3-10

description fab:4-6

multiplexing traffic int:8-4, int:8-5

range fab:4-5

VSAN membership fab:4-5

VSAN interfaces

creating int:8-40

description int:8-17

displaying information int:8-58

VSAN policies

default roles sec:3-8

VSANs

advantages fab:4-4

allowed-active int:3-7

allowed list sysmgnt:13-4

broadcast addresses fab:8-6

clocks fab:6-25

comparison with QoS qos:11-4

comparison with zones (table) fab:4-5

compatibility with DHCHAP sec:8-3

configuring allowed-active lists int:3-13

configuring FSPF fab:8-2

configuring multiple IPv4 subnets ipsvc:5-11

configuring trunk-allowed listsint:3-5to int:3-13

default settings fab:4-9

default VSANs fab:4-7

deleting fab:4-8

description??to fab:4-5

domain ID automatic reconfiguration sysmgnt:6-13

example membership for iSCSI devices ipsvc:3-63

fabric optimization for FICON fab:6-3

FC IDs fab:4-1

FCS sysmgnt:8-1

FCS support sysmgnt:8-1

features fab:4-1

FICON-enabled fab:4-9

FSPF connectivity fab:8-2

gateway switches ipsvc:5-4

interop mode fab:6-6

IP routing sec:5-1, sec:5-2

IPv4 static routing ipsvc:5-5

iSLB ipsvc:3-48

iSLB initiators ipsvc:3-48

isolated fab:4-7

load balancing fab:4-9

load balancing attributes fab:4-6

loop devices int:8-53

mismatches int:8-9

multiple zones fab:5-13

names fab:4-6

name server fab:7-2

operational states fab:4-8

port membership fab:4-7

port tracking qos:2-6

Rules and features sec:3-2

SPAN filters sysmgnt:13-4

SPAN source sysmgnt:13-4

SPAN sources sysmgnt:13-4

states fab:4-6

suspending for FICON fab:6-23

TE port mode int:8-4

TF port mode int:8-5

timer configuration fab:6-9

traffic isolation fab:4-4

traffic routing between ipsvc:5-1

transit ivr:3-11

trunk-allowed int:3-7

trunking ports fab:4-7

VRRP ipsvc:5-5

VSAN trunking. See trunking

VSAs

communicating attributes sec:4-9

protocol options sec:4-9

W

window management

configuring in FCIP profiles ipsvc:2-25

wizards

Quick Config Wizard fab:5-18

world wide names. See WWNs

WWNs

configuring fab:6-3

displaying information fab:6-13

link initialization fab:6-4

port security sec:9-5

secondary MAC addresses fab:6-10

static binding ipsvc:3-10

suspended connections int:8-9

X

XRC

FICON support fab:6-5

Z

zone attribute groups

cloning fab:5-30

zone databases

migrating a non-MDS database fab:5-30

zone members

adding to zones fab:5-17

converting to pWWN members fab:5-24

displaying information fab:5-22

zones

access control fab:5-5

adding to zone sets fab:5-25

adding zone members fab:5-17

assigning LUNs to storage subsystems fab:5-33

backing up (procedure) fab:5-9

changing from enhanced zones fab:5-34

cloning fab:5-30

compacting for downgrading fab:5-37

comparison with device aliases (table) fab:2-4

comparison with VSANs (table) fab:4-5

configuration guidelines ivr:3-8

configuring??to fab:5-25

configuring aliases fab:5-6

configuring and activating for iSLB ipsvc:3-18, ipsvc:3-49

configuring broadcasting fab:5-9

configuring fcaliases fab:5-6

CUPs fab:6-32

default policies fab:5-2

differences with IVR zones ivr:1-7

editing full zone databases fab:5-4

enforcing restrictions fab:5-7

exporting databases fab:5-8

features fab:5-3

importing databases fab:5-8

iSLB ipsvc:3-18, ipsvc:3-49

IVR communication ivr:1-7

logging facility sysmgnt:9-3

LUN-based fab:5-10

membership using pWWNs fab:4-5

merge failures int:8-9

read-only for IVR ivr:3-15

renaming fab:5-30

restoring (procedure) fab:5-9

viewing information fab:5-37

See also default zones

See also hard zoning; soft zoning

See also LUN zoning

See also read-only zones

See also zoning; zone sets

zone server databases

clearing fab:5-31

zone sets

activating fab:5-21

adding member zones fab:5-25

cloning fab:5-30

configuringfab:5-5to fab:5-23

considerations fab:5-13

copying fab:5-8

creating fab:5-5, fab:5-25

distributing configuration fab:5-7

enabling distribution fab:5-26

exporting fab:5-27

exporting databases fab:5-8

importing fab:5-27

importing databases fab:5-8

one-time distribution fab:5-27

recovering from link isolations fab:5-8

renaming fab:5-30

viewing information fab:5-37

See also active zone sets

See also active zone sets; full zone sets

See also zones; zoning

zone traffic priorities

description fab:5-9

zoning

configuring broadcasting fab:5-9

implementation fab:5-3

Quick Config Wizardfab:5-18to fab:5-20

See also LUN zoning

zoning based access control

configuring for iSCSI ipsvc:3-11

configuring for iSCSIiSCSI

configuring zoning based access control ipsvc:3-11