Cisco MDS 9500 Series Hardware Installation Guide
Index
Downloads: This chapterpdf (PDF - 333.0KB) The complete bookPDF (PDF - 35.92MB) | Feedback

Index

Table Of Contents

Numerics - A - B - C - D - E - F - G - H - I - L - M - N - O - P - R - S - T - W - X -

Index

Numerics

12-port 4-Gbps Fibre Channel switching modules

description 1-40

figure 1-40

14/2-port Multiprotocol Services module. See MPS-14/2

16-Port Storage Services Module 1-46

16-port switching modules

description 1-43

figure 1-43

LEDs (table) 1-37, 1-42, 1-45

18/4-Port Multiservice Module 1-48

24-port 4-Gbps Fibre Channel switching modules

description 1-39

figure 1-39

24-port 8-Gbps Fibre Channel switching modules

description 1-38

figure 1-38

32-Port 8-Gbps Advanced Fibre Channel Switching Module 1-35

32-port Fibre Channel Advanced Services Module. See ASM

32-port Fibre Channel Storage Services Module. See SSM

32-port switching modules

description 1-42

figure 1-43

LEDs (table) 1-37, 1-42, 1-45

4/44-port 8-Gbps Host-Optimized Fibre Channel switching modules

description 1-38

figure 1-38

48-port 4-Gbps Fibre Channel switching modules

connectors 1-37, 1-38, 1-39

description 1-39

figure 1-37, 1-38, 1-39

LEDs (figure) 1-39

48-Port 8-Gbps Advanced Fibre Channel Switching Module 1-35

48-port 8-Gbps Fibre Channel switching modules

description 1-37

figure 1-37

4-port 10-Gbps Fibre Channel switching modules

description 1-41

figure 1-41

69066

2H_Head2

Cisco MDS 16-Port Storage Services Node (SSN-16) 1-46

8-Port 10-Gbps FCoE Module 1-33

8-Port 10-Gbps FCoE module 1-33

8-port 10G FCoE 1-33

A

AC power

installing (MDS 9509 Director) 2-57

providing (MDS 9506 Director) 2-30, 2-32

providing (MDS 9509 Director) 2-30, 2-32

providing (MDS 9513 Director) 2-29

removing (MDS 9509 Director) 2-56

removing (MDS 9513 Director) 2-52

Advanced Fibre Channel Switching Module

48-Port 8-Gbps Advanced Fibre Channel Switching Module

32-Port 8-Gbps Advanced Fibre Channel Switching Module 1-35

airflow specifications D-4

ASM

description 1-55

figure 1-55

LEDs (table) 1-56

audience

description ii-xvii

B

backplane

description 1-8

batteries on CSM 2-50

binary images

downloading 1-55, 1-57

C

cabinet installation guidelines 2-2

cabinets

perforated, requirements C-3

requirements C-1

See also racks

solid wall requirements C-4

space requirements C-2

cabling

COM1 port E-3

console port E-2

MGMT 10/100/1000 Ethernet port E-4

MGMT 10/100 Ethernet port E-6

requirements 3-2

SFP transceivers 3-14, 3-15

Caching Services Module. See CSM

chassis

grounding 2-23

installing guidelines 2-3

unpacking 2-5

chassis (MDS 9506 Director)

description 1-7

features 1-7

figure 1-7

grounding (figure) 2-27

installing in a rack (procedure) 2-15

preinstallation 2-2

serial number location F-3

chassis (MDS 9509 Director)

description 1-6

features 1-6

figure 1-6

grounding 2-26

installing in a rack (procedure) 2-11

power supplies 2-11

preinstallation 2-2

serial number location F-2

chassis (MDS 9513 Director)

description 1-3

features 1-3

figure 1-4, 1-5

installing in a rack (procedure) 2-7

power supplies 1-10, 2-7, 2-28

preinstallation 2-2

serial number location F-2

Cisco MDS 9500 Series Multilayer Directors

description 1-1

clock modules

description 1-8, 2-76

installing (MDS 9506 Director) 2-86

installing (MDS 9509 Director) 2-83

installing (MDS 9513 Director) 2-79

installing in MDS 9506 Director (procedure) 2-86

installing in MDS 9509 Director (procedure) 2-79, 2-83

removing (MDS 9506 Director) 2-84

removing (MDS 9509 Director) 2-80

removing (MDS 9513 Director) 2-76, 2-77

removing from MDS 9506 Director (procedure) 2-83

removing from MDS 9509 Director (procedure) 2-77, 2-80

COM1 port

cabling E-3

connecting 3-4

pinouts (table) E-3

support 3-4

support (note) 3-4

CompactFlash cards

installing 2-76

LED on supervisor module 1-24

removing 2-75

Supervisor-1 modules 1-23

Supervisor-2 modules 1-19

Supervisor-2 modules, LEDs 1-20

connecting

COM1 port 3-4

console port 3-2

Fibre Channel ports 3-9

MGMT 10/100/1000 3-6

MGMT 10/100 Ethernet port 3-7

console port

cabling E-2

connecting 3-2

pinouts E-2

contact and site information F-6

crossbar fan modules

description 1-16

crossbar modules

Cisco MDS 9513 support 1-25

description 1-25

installing 2-48

location 1-25

removing 2-47, B-5

supervisor association 1-25

crossbar switching fabric

description 1-22

dual fabric configurations 1-17, 1-22

mesh design 1-17

Supervisor-2 modules 1-17

CSM

batteries 2-50

description 1-59

installing 2-45

internal (figure) 1-60

LEDs (table) 1-61

maintaining 2-50

powering off 2-44

removing 2-44

requirement (note) 2-44

CUP 1-48

customer service, contacting F-1

CWDM transceivers

description 1-63

D

DC power

installing (MDS 9509 Director) 2-62

providing (MDS 9506 Director) 2-34

providing (MDS 9509 Director) 2-33

removing (MDS 9509 Director) 2-61

downloading software images

ASM-SFN image 1-55

SSM image 1-57

DWDM transceivers

description 1-64

E

electrostatic discharge (ESD) 2-19

environmental specifications D-1

Ethernet port

MGMT 10/100 3-7

MGMT 10/100/1000 3-6

F

fan modules

crossbar fan modules, description 1-16

description 1-16

failure (caution) 1-16

LEDs 1-16

removing and installing 2-68

FCoE 1-33

8-Port 10-Gbps FCoE Module 1-33

Fiber Connectivity 1-48

fiber optic cables, maintaining 3-16

Fibre Channel/Gigabit Ethernet SFP transceivers 1-63

Fibre Channel ports

connecting 3-9

connecting with LC-type cables (figure) 3-15

G

Genaration 3 Modules

Installing the MDS 9000 4/44-Port 8-Gbps Host-Optimized Module B-3

Generation 1 modules

services modules 1-46

switching modules 1-32

Generation 2 modules

switching modules 1-32

Generation 3 modules

switching modules 1-32

grounding

attaching the ESD wrist strap 2-19

best practices 2-17

chasis 2-23

establishing the system ground 2-22

required tools and equipment 2-22

H

hardware compatibility matrix (table) 1-27

heat dissipation

Cisco MDS 9506 Director D-17

Cisco MDS 9509 Director D-7, D-11

high availability

features 1-1

I

installing

chassis (MDS 9506 Director) 2-2

chassis (MDS 9509 Director) 2-2

chassis (MDS 9513 Director) 2-2

CompactFlash cards 2-76

crossbar modules 2-48

EIA shelf brackets C-6

equipment required 2-5

guidelines 2-3

power supplies (Cisco MDS 9513 Director 2-54

power supplies (MDS 9509 Director) 2-57, 2-62

rack mount brackets C-11

rack-mounting guidelines C-7

services modules 2-38

SFP transceiver cables 3-15

SFP transceivers (note) 3-13

shelf brackets C-12

supervisor modules 2-38, 2-40

switching modules 2-38

Telco shelf brackets C-6

X2 transceivers 3-11

installing SFP transceivers 3-14

IPS modules

IPS-4 modules (figure) 1-54

IPS-4 modules, description 1-53

IPS-8 modules, description 1-53

IPS-8 modules, figure 1-53

LEDs (table) 1-54

IP Storage Services module. See IPS modules

IPv6 1-48

L

LC-type cables

connecting to Fibre Channel ports 3-15

figure 3-15

LEDs

ASM (table) 1-56

clock modules 1-8, 1-16

CSM (table) 1-61

fan modules 1-16

IPS modules (table) 1-54

MDS 9513 Director power supplies (table) 1-11

MPS-14/2 (table) 1-34, 1-49, 1-52

Supervisor-2 modules (table) 1-20

switching modules (table) 1-36, 1-42, 1-45

M

maintaining

CSM 2-50

CSM disk drives 2-51

fiber optic cables 3-16

SFP transceivers 3-16

maintenance records F-1

MDS 9506 Director

description 1-7

grounding location (figure) 2-27

heat dissipation D-17

installing clock modules (procedure) 2-86

installing in a rack(procedure) 2-15

power supply LEDs (table) 1-8, 1-15

removing clock modules (procedure) 2-83

MDS 9509 Director

description 1-6

figure 1-6

grounding location (figure) 2-26

heat dissipation D-7, D-11

installing clock modules (procedure) 2-79, 2-83

installing in a rack (procedure) 2-11

power supply LEDs (table) 1-8, 1-15

removing clock modules (procedure) 2-77, 2-80

MDS 9513 Director

installing in a rack (procedure) 2-7

MGMT 10/100/1000 Ethernet port

cabling E-4

pinouts E-4

MGMT 10/100/1000 port

connecting 3-6

MGMT 10/100 Ethernet port

cabling E-6

connecting 3-7

pinouts E-6

Migration Procedures

Generation 3 modules B-3

Installing MDS 9513 Fabric 2 Modules and Installing MDS 9000 24-port or 48-port 8-Gbps Modules B-9

Installing MDS 9513 Fabric 2 Modules and Running Cisco SAN-OS 3.x B-5

Installing the MDS 9000 4/44-Port 8-Gbps Host-Optimized Module B-3

Installing the MDS 9513 Fabric 2 Modules and Activating Higher Bandwidth by Reloading the Switch B-10

Migration Procedure for the MDS 9509 Director and MDS 9506 Director B-12

modules

chassis compatibility 1-27

specifications D-4

weight D-5

MPS-14/2

description

LEDs (table) 1-34, 1-49, 1-52

software release requirements 1-51, 1-55

N

NEBS 2-19

network connections, preparing 3-2

new and changed information (table) ii-xi

O

open racks, standard (requirements) C-5

organization

description ii-xvii

P

PEMs

installing 2-64

removing 2-64

physical specifications (table) D-2

pinouts

COM 1 port E-3

console port E-2

MGMT 10/100/1000 Ethernet port E-4

MGMT 10/100 Ethernet port E-6

plugs supported for power supplies E-7

port

MGMT 10/100/1000 3-6

on supervisor module 1-23

port indexes

availability 1-28

description 1-28

Generation 1 limitations 1-29

Generation 2 maximum 1-31

Generation combination (example) 1-31

Generation combination limitations 1-31

port interfaces

Supervisor-2 modules 1-19

power cord, jumper E-11

power cords, length E-7

powering up the switch 2-36

power supplies

chassis (MDS 9509 Director) 2-11

chassis (MDS 9513 Director) 2-7, 2-28

circuits 2-4

description 1-9

installing (Cisco MDS 9506 Director) 2-67

installing (Cisco MDS 9513 Director) 2-54

installing (MDS 9509 Director) 2-57, 2-62

LEDs 1-11

LEDs (table) 1-11

MDS 9506 Director LEDs (table) 1-8, 1-15

MDS 9509 Director LEDs (table) 1-8, 1-15

MDS 9513 Director 1-10

MDS 9513 Director (figure) 1-10

removing (Cisco MDS 9506 Director) 2-67

removing (MDS 9509 Director) 2-56, 2-61

removing (MDS 9513 Director) 2-52

starting up the switch 2-28

supported plugs E-7

power supplies (Cisco MDS 9506 Director)

removing and installing PEMs 2-64

specifications D-15

power supplies (Cisco MDS 9509 Director)

specifications D-6, D-10

power supplies (MDS 9506 Director)

description 1-15

power supplies (MDS 9509 Director)

description 1-12

pre-installation

guidelines 2-2

rack mount brackets C-7

R

rack-mount installation options 2-2

racks

EIA installing C-10

open, requirements C-5

required equipment C-8

requirements C-1

See also cabinets.

space requirements C-2

Telco installing C-9

Telco requirements C-6

records

chassis and module information F-7

contact and site information F-6

site planning and maintenance F-1

removing

CompactFlash cards 2-75

crossbar modules 2-47, B-5

CSM 2-44

power supplies (MDS 9509 Director) 2-56, 2-61

power supplies (MDS 9513 Director) 2-52

services modules 2-45

SFP transceiver cables 3-14

SFP transceivers 3-12

shelf brackets C-12

supervisor modules 2-39

switching modules 2-45

X2 transceivers 3-11

S

SAN extension 1-48

serial number

location (MDS 9506 Director) F-3

location (MDS 9509 Director) F-2

location (MDS 9513 Director) figure F-2

services modules

ASM 1-55

CSM 1-59

description 1-46

Generation 1 modules 1-46

installing 2-38, 2-45

IPS modules 1-53

MPS-14/2 module 1-51

MSM-18/4 module 1-48

removing 2-45

specifications D-4

SSM 1-57

SFP transceivers

cabling 3-14, 3-15

CWDM 1-63

description 1-63, 3-12

DWDM 1-64

Fibre Channel 1-63

Fibre Channel/Gigabit Ethernet 1-63

Gigabit Ethernet 1-63

installing 3-14

latches supported 3-12

removing 3-12

shelf bracket

Cisco MDS 9500, installation C-13

installing Telco/EIA C-6

shelf brackets

description C-13

site planning preparation checklist F-4

specifications

airflow D-4

cables E-1

environmental D-1

heat dissipation for Cisco MDS 9506 Director D-17

heat dissipation for Cisco MDS 9509 Director D-7, D-11

MDS 9513 Director D-7

modules D-4

physical (MDS 9506 Director) D-3

pinouts E-1

power, MDS 9506 Director D-15

power, MDS 9509 Director D-6, D-10

SSM

alarm LEDs 1-57

description 1-57

figure 1-57

LEDs (table) 1-58

power-on LEDs 1-57

ready LEDs 1-57

self-test passed LEDs 1-57

self-test running LEDs 1-57

SSN-16 1-46

Supervisor 1-17

Supervisor-1 modules

CompactFlash cards 1-23

control and management 1-22

Ethernet port 3-7

features 1-21

figure 1-22

LEDs 1-23

LEDs (figure) 1-24

LEDs (table) 1-24

memory options 1-23

nondisruptive restart 1-22

processor 1-23

redundant central arbiter 1-22

support (note) 1-21

warm switchover 1-22

Supervisor-2

Ethernet port 3-6

Supervisor 2A 1-17

Supervisor-2A ii-xii, 1-17

Supervisor-2A Modules 1-17

Supervisor-2 modules

CompactFlash cards 1-19

CompactFlash cards LEDs 1-20

control and management 1-18

description 1-17

features 1-18

figure 1-18

integrated crossbar switching fabric 1-17

LEDs 1-20

LEDs (figure) 1-20

LEDs (table) 1-20

LEDs description 1-20

memory options 1-19

nondisruptive restart 1-18

port interfaces 1-19

processor 1-19

redundant central arbiter 1-18

warm switchover 1-18

supervisor module

port interfaces 1-23

supervisor modules

description 1-16

installing 2-38, 2-40

removing 2-39

specifications D-4

switching modules

12-port 4-Gbps Fibre Channel switching modules 1-40

16-port 2-Gbps Fibre Channel (figure) 1-43

24-port 4-Gbps Fibre Channel switching modules 1-39

24-port 8-Gbps Fibre Channel switching modules 1-38

32-port 2-Gbps Fibre Channel (figure) 1-42

4/44-port 4-Gbps Host-Optimized Fibre Channel switching modules 1-38

48-port 4-Gbps Fibre Channel switching modules 1-39

48-port 8-Gbps Fibre Channel switching modules 1-37

4-port 10-Gbps Fibre Channel switching modules 1-41

description 1-32

downloading binary image 1-55, 1-57

features 1-44

Generation 1 modules 1-32

Generation 2 modules 1-32

Generation 3 modules 1-32

installing 2-38, 2-45

LEDs (table) 1-36, 1-42, 1-45

removing 2-45

specifications D-4

system grounding 2-17

T

Telco racks (requirements) C-6

transceivers

description 1-62

supported SFP transceivers 1-62

supported X2 transceiver 1-62

troubleshooting

contacting customer service F-1

W

weight of modules D-5

X

X2 transceivers

description 1-62, D-20

installing 3-11

removing 3-11