Contents
New and Changed Information
The following table provides an overview of the significant changes to this guide up to this current release. The table does not provide an exhaustive list of all changes made to the guide or of the new features up to this release.
Table 1 New Features and Changed Behavior in Cisco APIC Cisco APIC Release Version
Feature
Description
What Changed
Release 1.3(1g)
--
Removed object model CLI procedure and replaced with NX-OS-Style CLI procedure.
This content is available here: Deploying an EPG on a Specific Port with APIC Using the NX-OS Style CLI and includes examples.
Release 1.2(1)
--
Procedure steps updated with the new Advanced and Basic GUI versions.
Release 1.0
--
This guide was released.
Statically Deploying an EPG on a Specific Port
This topic provides a typical example of how to statically deploy an EPG on a specific port when using Cisco APIC.
Deploying an EPG on a Specific Port with APIC Using the GUI
Procedure
Deploying an EPG on a Specific Port with APIC Using the NX-OS Style CLI
Procedure
Deploying an EPG on a Specific Port with APIC Using the REST API
Procedure
Deploy an EPG on a specific port.
Example:<fvTenant name="<tenant_name>" dn="uni/tn-test1" > <fvCtx name="<network_name>" pcEnfPref="enforced" knwMcastAct="permit"/> <fvBD name="<bridge_domain_name>" unkMcastAct="flood" > <fvRsCtx tnFvCtxName="<network_name>"/> </fvBD> <fvAp name="<application_profile>" > <fvAEPg name="<epg_name>" > <fvRsPathAtt tDn="topology/pod-1/paths-1017/pathep-[eth1/13]" mode="regular" instrImedcy="immediate" encap="vlan-20"/> </fvAEPg> </fvAp> </fvTenant>Copyright © 2016, Cisco Systems, Inc. All rights reserved.