Cisco NX-OS Release 11.0(1b) Release Notes for Cisco Nexus 9000 Series ACI-Mode Switches

Available Languages

Download Options

PDF (239.9 KB)
View with Adobe Reader on a variety of devices
ePub (114.0 KB)
View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle) (119.5 KB)
View on Kindle device or Kindle app on multiple devices

Updated:August 4, 2014

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Cisco NX-OS Release 11.0(1b) Release Notes for Cisco Nexus 9000 Series ACI-Mode Switches

Contents

Introduction

ACI Fabric and Switches

Cisco Nexus 9000 Series ACI-Mode

Switch Features

Software Upgrade Recommendation

Supported Hardware

Supported FEX Models

Installation Notes

Compatibility Information

Cisco NX-OS Release 11.0(1b) Release Notes
for Cisco Nexus 9000 Series ACI-Mode Switches

Publication Date: August 4, 2014

This document describes the features, caveats, and limitations for Cisco NX-OS software that runs on Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) switches. Use this document in combination with the Cisco Application Policy Infrastructure Controller, Release 1.0(1e), Release Notes. Additional product documentation is listed in the “Related Documentation” section.

Release notes are sometimes updated with new information about restrictions and caveats. See the following website for the most recent version of the Cisco NX-OS Release 11.0(1b) Release Notes for Cisco Nexus 9000 Series ACI-Mode Switches:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-release-notes-list.html

Table 1 shows the online change history for this document.

Table 1 Online History Change
Date	Description
August 04, 2014	Created release notes for Release 11.0(1b).
August 14, 2014	Added several Known Behaviors related to clustering.
August 19, 2014	Added a Known Behavior about warm standby (stateless mode) for the supervisor module of a Cisco Nexus 9508 ACI-Mode switch.
August 22, 2014	Added CSCuo20106 to the Open CaveatsThis section lists the open caveats in Cisco NX-OS Release 11.0(1b). Click the Bug ID shown in Table 4 to access the Bug Search Tool and see additional information about the bug. section.
September 18, 2014	Added the Licensing Information section.
October 1, 2014	Removed the Licensing Information section.
October 6, 2014	Added the Software Upgrade Recommendation section.
October 20, 2014	Added “Resolved Caveats”section. Moved bug ID CSCuo81718 from Open Caveats to Resolved Caveats.
November 18, 2014	Added “Supported FEX Models”.
January 12, 2015	Removed ICMP from the protocol list in the “Usage Guidelines”.
February 2, 2015	Added a link to the APIC release notes in the “Usage Guidelines”.

This document includes the following sections:

Introduction

The Cisco Application Centric Infrastructure (ACI) is an architecture that allows the application to define the networking requirements in a programmatic way. This architecture simplifies, optimizes, and accelerates the entire application deployment life cycle.

The Cisco Application Centric Infrastructure Fundamentals guide provides complete details about the ACI, including its two major components:

Cisco Application Policy Infrastructure Controller (APIC)
ACI Fabric, including Cisco Nexus 9000 spine and leaf switches

The Cisco Application Centric Infrastructure Fundamentals guide also includes a glossary of terms that are used in the ACI.

Key features of the ACI include the following:

Simplified automation with an application-driven policy model
Common platform for managing physical, virtual, and cloud-based environments
Centralized visibility with real-time, application health monitoring
Operational simplicity, with common policy, management, and operation models across application, network, and security resources
Open software flexibility for DevOps teams and ecosystem partner integration
Scalable performance and secure multi-tenancy

ACI Fabric and Switches

A clustered replicated APIC appliance manages the ACI fabric. Cisco Nexus 9000 Series switches can run with the ACI-compatible software to run in the leaf/spine fabric mode. These switches form a “fat-tree” network by connecting each leaf node to each spine node; all other devices connect to the leaf nodes.

Figure 1shows the ACI Fabric with Cisco Nexus 9508, Cisco Nexus 9300 Series leaf switches, and the APIC.

Figure 1 ACI Fabric with Spine and Leaf Switches, and the APIC,

Cisco Nexus 9000 Series ACI-Mode

Cisco NX-OS Software for the Cisco Nexus 9000 Series is a data center, purpose-built, operating system designed with performance, resiliency, scalability, manageability, and programmability at its foundation. It provides a robust and comprehensive feature set that meets the requirements of virtualization and automation in data centers

Cisco NX-OS Release 11.0 works only on Cisco Nexus 9000 Series switches in ACI Mode.

See Table 2 for a list of modules that are supported on Cisco Nexus 9000 Series switches in ACI Mode.

Switch Features

The Cisco Nexus 9000 Series switches have the following features:

Predictable high performance
Nonblocking, high-density 1 and 10 Gigabit Ethernet configuration
Nonblocking, high-density 10 and 40 Gigabit Ethernet configuration
Advanced optics
Highly available, scalable, and robust solution
Chassis designed for 2 to 3 future generations of line cards

Software Upgrade Recommendation

It is recommended that you upgrade your software to Cisco NX-OS Release 11.0(1d) because the release includes a resolution for the vulnerability of bash that is identified by the Common Vulnerability and Exposures (CVE) IDs: CVE-2014-6271 and CVE-2014-7169.

Supported Hardware

Table 2 lists the hardware that the Cisco Nexus 9000 Series ACI Mode switches support.

Table 2 Supported Hardware
Hardware Type	Product ID	Description
Spine switch	N9K-C9508-B1	Cisco Nexus 9508 chassis bundle with 1 supervisor module, 3 power supplies, 2 system controllers, 3 fan trays, and 3 fabric modules
Spine switch	N9K-C9508-B2	Cisco Nexus 9508 chassis bundle with 1 supervisor module, 3 power supplies, 2 system controllers, 3 fan trays, and 6 fabric modules
Chassis	N9K-C9508	Cisco Nexus 9508 chassis with 8 slots
Spine switch module	N9K-X9736PQ	Cisco Nexus 9500 36-port, 40 Gigabit Ethernet QSFP aggregation module
Switch module	N9K-SUP-A	Cisco Nexus 9500 Series supervisor module
Switch module	N9K-SC-A	Cisco Nexus 9500 Series system controller
Chassis component	N9k-PAC-3000W-B	Cisco Nexus 9500 3000W AC power supply, port side intake
Spine switch module	N9K-C9508-FM	Fabric module
Chassis component	N9K-C9508-FAN	Fan tray
Spine switch	N9K-C9336PQ	Cisco Nexus 9336PQ switch, 36-port 40 Gigabit Ethernet QSFP
Top-of-rack (ToR) leaf switch	N9K-C9396PX	Cisco Nexus 9300 48-port, 1/10 Gigabit Ethernet SFP+ and 12-port, 40 Gigabit Ethernet QSFP switch
Top-of-rack (ToR) leaf switch	N9K-C93128TX	Cisco Nexus 9300 96-port, 1-/10-Gbps BASE-T and 8-port, 40 Gigabit Ethernet QSFP switch

Supported FEX Models

Table 3 lists the FEX models that the Cisco Nexus 9000 Series ACI Mode switches support. For more information on the FEX models, see Cisco Nexus 2000 Series Fabric Extenders Data Sheet.

Note FEX requires software version 5.x or later to be brought up successfully.

Table 3 Supported FEX Models
Product ID	Description
N2K-C2248PQ-10GE	Cisco Nexus 2248PQ 10GE Fabric Extender, 2PS, 4 Fan Module, 48x1/10GE (req SFP/SFP+) + 4x40G QSFP+(req QSFP+), choice of airflow and power supply
N2K-C2248TP-E-1GE	Cisco Nexus 2248TP-E Series 1GE Fabric Extender, 2PS, 1 Fan Module, 48x100/1000Base-T + 4x10GE (req SFP+), 32MB buffer, choice of airflow and power supply
N2K-C2248TP-1GE	Cisco Nexus 2248TP Series 1GE Fabric Extender, 2 AC PS, 1 Fan Module (Standard Airflow/port side exhaust), 48x100/1000Base-T + 4x10GE (req SFP+), same as N2K-C2248TP
N2K-C2232PP-10GE	Cisco Nexus 2232PP Series 10GE Fabric Extender, 2 AC PS, 1 Fan Module (Standard Airflow/port side exhaust), 32x1/10GE (req SFP/SFP+) + 8x10GE (req SFP+), same as N2K-C2232PP
N2K-C2232TM-E-10GE	Cisco Nexus 2232TM-E Series 10GBASE-T Fabric Extender, 2PS, 1 Fan Module, 32x1/10GBase-T + 8x10GE Module (req SFP+), choice of airflow and power supply

Installation Notes

For installation instructions, see the Cisco ACI Fabric Hardware Installation Guide.

Compatibility Information

Cisco NX-OS Release 11.0(1b) supports the following:

Cisco APIC Release 1.0(1e)
Cisco AVS, Release 4.2(1)SV2(2.3)
Cisco ASA 5585, Release 8.4 and higher
Cisco ASAv (virtual), Release 9.2.1
F5, Big IP, LTM Physical, LTM Virtual, Version 11.4.1
Citrix Netscaler, MPX, SDX, VPX, Release 10.1 and higher
Citrix Netscaler 1000v, ESX 5.0 and higher
VMware vCenter 5.1 and 5.5 and vShield 5.1 and 5.5

Usage Guidelines

The current list of protocols that are allowed (and cannot be blocked through contracts) include the following. Some of the protocols have SrcPort/DstPort distinction.

Note Also see the APIC release notes for policy information: http://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/products-release-notes-list.html

– UDP DestPort 161: SNMP. These cannot be blocked through contracts. Creating an SNMP ClientGroup with a list of Client-IP Addresses restricts SNMP access to only those configured Client-IP Addresses. If no Client-IP address is configured, SNMP packets are allowed from anywhere.

– TCP SrcPort 179: BGP

– TCP DstPort 179: BGP

– OSPF

– UDP DstPort 67: BOOTP/DHCP

– UDP DstPort 68: BOOTP/DHCP

– IGMP

– PIM

– UDP SrcPort 53: DNS replies

– TCP SrcPort 25: SMTP replies

– TCP DstPort 443: HTTPS

– UDP SrcPort 123: NTP

– UDP DstPort 123: NTP

Caveats

This section includes the following topics:

Open Caveats

This section lists the open caveats in Cisco NX-OS Release 11.0(1b). Click the Bug ID shown in Table 4 to access the Bug Search Tool and see additional information about the bug

Open CaveatsThis section lists the open caveats in Cisco NX-OS Release 11.0(1b). Click the Bug ID shown in Table 4 to access the Bug Search Tool and see additional information about the bug.

Table 4 Open Caveats
Bug ID	Description
CSCun35596	FEX logs are missing in the output of the show fex detail command.
CSCun47041	Configuring the BGP maximum prefix policy is not supported.
CSCun88626	The output of the show interface command for a port that is configured as a span-destination port does not show it as a span-destination port.
CSCun96495	Events and faults for interfaces are not updated under Ports in the GUI.
CSCuo20106	Unnecessary SNMP traps are generated when an I/O module is removed and inserted.
CSCup05629	The output of some CLI commands displays very slowly.
CSCup38579	The show environment command in the APIC is missing equipment sensors and FEXes.
CSCup41392	The clear counters command does not work when spaces are included in the interface name.
CSCup68324	When a spine port and a port context source are in the same session, the filter does not work for SPAN.
CSCup83680	The show ip route command does not work if /32 address is provided as an argument.
CSCup81243	The port-channel min-link command brings up a port that is in admin down state.
CSCup88987	Remote ERSPAN packets are spanned when the destination port is a SPAN source.
CSCup92534	Continuous “threshold exceeded” messages are generated from the fabric.
CSCup93039	An SNMP named trap host configuration does not get restored after a configuration import.
CSCuq21358	After the same tag is configured for two interfaces, a new tag cannot be added or an existing tag associated with a third interface.
CSCuq21360	Following a FEX or switch reload, configured interface tags are no longer configured correctly.
CSCup97404	A vMotion vmk interface requires Arp flooding to be enabled on the inband bridge domain.
CSCuq04897	Pings from the ESX vtep to the ERSPAN destination VM fails.
CSCuq14160	The time between vMotion events for a VM should be greater than five minutes.
CSCuq15965	The show ip route vrf overlay-1 detail command does not work in the ibash shell.
CSCuq20273	A new router MAC address of an external router is not learned on both leaf switches of a vPC pair.
CSCuq21010	If you use the recovery image to reboot the active supervisor module on the Cisco Nexus 9508 switch, the supervisor goes to the loader prompt.
CSCuq23255	The following power redundancy modes are supported: non-redundant, redundant, and power output redundancy (N+1).

Resolved Caveats

This section lists caveats that are resolved in Cisco NX-OS Release 11.0(1b). Click the Bug ID shown in Table 5 to access the Bug Search Tool and see additional information about the bug.

Table 5 Resolved Caveats
Bug ID	Description
CSCuo81718	Glean is not occurring for destination IP addresses of the shared services.

Known Behaviors

This section lists caveats that describe known behaviors in Cisco NX-OS Release 11.0(1b). Click the Bug ID shown in Table 6 to access the Bug Search Tool and see additional information about the bug.

Table 6 Known Behaviors
Bug ID	Description
CSCuo37016	Layer 3 switched packets that go out of a FEX Hif interface are not spanned.
CSCuo50533	When output span is enabled on a port where the filter is VLAN, multicast traffic in that VLAN that goes out of that port is not spanned.

The Cisco Nexus 9508 ACI-mode switch supports warm (stateless) standby where the state is not synched between the active and the standby supervisor modules. For an online insertion and removal (OIR) or reload of the active supervisor module, the standby supervisor module becomes active, but all modules in the switch are reset because the switchover is stateless. In the output of the show system redundancy status command, warm standby indicates stateless mode.
When a recommissioned APIC controller rejoins the cluster, GUI and CLI commands can time out while the cluster expands to include the recommissioned APIC controller.
If connectivity to the APIC cluster is lost while a switch is being decommissioned, the decommissioned switch may not complete a clean reboot. In this case, the fabric administrator should manually complete a clean reboot of the decommissioned switch.
Before expanding the APIC cluster with a recommissioned controller, remove any decommissioned switches from the fabric by powering down and disconnecting them. Doing so will ensure that the recommissioned APIC controller will not attempt to discover and recommission the switch.

IGMP Snooping Known Behaviors:

Multicast router functionality is not supported when IGMP queries are received with VxLAN encapsulation.
IGMP Querier election across multiple Endpoint Groups (EPGs) or Layer 2 outsides (External Bridged Network) in a given Bridge Domain (BD) is not supported. Only one EPG or Layer 2 outside for a given BD should be extended to multiple multicast routers if any.
The rate of the number of IGMP reports sent to a leaf switch should be limited to 1000 reports per second.
Unknown IP multicast packets are flooded on ingress leaf switches and border leaf switches, unless “unknown multicast flooding” is set to “Optimized Flood” in a BD. This knob can be set to “Optimized Flood” only for a maximum of 50 BDs per leaf.

If “Optimized Flood” is enabled for more than the supported number of BDs on a leaf, follow these configuration steps to recover:

– Set “unknown multicast flooding” to “Flood” for all BDs mapped to a leaf.

– Set “unknown multicast flooding” to “Optimized Flood” on needed BDs.

Cisco NX-OS Release 11.0(1b) Release Notes for Cisco Nexus 9000 Series ACI-Mode Switches

Available Languages

Download Options

Bias-Free Language

Table of Contents

Cisco NX-OS Release 11.0(1b) Release Notes
for Cisco Nexus 9000 Series ACI-Mode Switches

Contents

Introduction

ACI Fabric and Switches

Cisco Nexus 9000 Series ACI-Mode

Switch Features

Software Upgrade Recommendation

Supported Hardware

Supported FEX Models

Installation Notes

Compatibility Information

Usage Guidelines

Caveats

Open Caveats

Resolved Caveats

Known Behaviors

Related Documentation

Web-Based Documentation

Downloadable Documentation

Hardware Documentation

© 2014 Cisco Systems, Inc. All rights reserved.

Was this Document Helpful?

Contact Cisco

This Document Applies to These Products