The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This guide is for the networking or computer technician responsible for installing Cisco IE 2000U series switches. We assume that you are familiar with the concepts and terminology of Ethernet and local area networking.
This guide documents the hardware features of the Cisco IE 2000U series switches. It describes the physical and performance characteristics of each switch, explains how to install a switch, and provides troubleshooting information.
This guide does not describe system messages that you might receive or how to configure your switch. For more information, see the Cisco IE 2000U Switch Getting Started Guide and the Cisco Connected Grid Switches System Management Software Configuration Guide at www.cisco.com/go/ie2000u-docs. For the Cisco IOS 15.2M&T command references, go to: http://www.cisco.com/en/US/products/ps11746/prod_command_reference_list.html
This document uses the following conventions.
Note: Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual.
Caution: Means reader be careful. In this situation, you might perform an action that could result in equipment damage or loss of data.
Warning: IMPORTANT SAFETY INSTRUCTIONS
Means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device.
SAVE THESE INSTRUCTIONS
Regulatory: Provided for additional information and to comply with regulatory and customer requirements.
The safety warnings for this product are translated into several languages in the Regulatory Compliance and Safety Information for the Cisco IE 2000U Switch that ships with the product. The EMC regulatory statements are also included in that guide.
■To receive timely, relevant information from Cisco, sign up at Cisco Profile Manager.
■To get the business impact you’re looking for with the technologies that matter, visit Cisco Services.
■To submit a service request, visit Cisco Support.
■To discover and browse secure, validated enterprise-class apps, products, solutions and services, visit Cisco Marketplace.
■To obtain general networking, training, and certification titles, visit Cisco Press.
■To find warranty information for a specific product or product family, access Cisco Warranty Finder.
Cisco Bug Search Tool (BST) is a web-based tool that acts as a gateway to the Cisco bug tracking system that maintains a comprehensive list of defects and vulnerabilities in Cisco products and software. BST provides you with detailed defect information about your products and software.