Table Of Contents
Regulatory Compliance and Safety Information for the Cisco Catalyst Blade Switch
3000 Series for HP
Translated Safety Warnings
Statement 17B—Overtemperature Warning
Statement 43—Jewelry Removal Warning
Statement 171—Ethernet Cable Shielding in Offices
Statement 1001—Work During Lightning Activity
Statement 1004—Installation Instructions
Statement 1008—Class 1 Laser Product
Statement 1030—Equipment Installation
Statement 1040—Product Disposal
Statement 1044—Port Connections
Statement 1071—Warning Definition
Statement 1074—Comply with Local and National Electrical Codes
European Directives
Statement 275—Declaration of Conformity with Regard to the Directives 73/23/EEC and 89/336/EEC as amended by Directive 93/68/EEC
Regulatory Standards Compliance
EMC Environmental Conditions for Products Installed in the European Union
EMC Class A Notices and Warnings
Class A Notice for FCC
Class A Notice for Canada
Statement 191—VCCI Class A Warning for Japan
Statement 256—Class A Warning for Hungary
Statement 257—Class A Notice for Taiwan and Other Traditional Chinese Markets
Statement 294—Class A Warning for Korea
Statement 340—Class A Warning for CISPR22
Related Documentation
Obtaining Documentation, Obtaining Support, and Security Guidelines
Regulatory Compliance and Safety Information for the Cisco Catalyst Blade Switch
3000 Series for HP
Read this document before installing or servicing the Cisco Catalyst Blade Switch 3000 Series for HP.
Warning IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071
SAVE THESE INSTRUCTIONS
This document includes the following sections:
•Translated Safety Warnings
•European Directives
•Regulatory Standards Compliance
•EMC Environmental Conditions for Products Installed in the European Union
•EMC Class A Notices and Warnings
•Related Documentation
•Obtaining Documentation, Obtaining Support, and Security Guidelines
Translated Safety Warnings
This section includes translations in multiple languages of the warnings that may appear in your product documents:
•"Statement 17B—Overtemperature Warning" section
•"Statement 43—Jewelry Removal Warning" section
•"Statement 171—Ethernet Cable Shielding in Offices" section
•"Statement 1001—Work During Lightning Activity" section
•"Statement 1004—Installation Instructions" section
•"Statement 1008—Class 1 Laser Product" section
•"Statement 1030—Equipment Installation" section
•"Statement 1040—Product Disposal" section
•"Statement 1044—Port Connections" section
•"Statement 1071—Warning Definition" section
•"Statement 1074—Comply with Local and National Electrical Codes" section
Statement 17B—Overtemperature Warning
Warning |
To prevent the switch from overheating, do not operate it in an area that exceeds the maximum recommended ambient temperature of 113°F (45°C). To prevent airflow restriction, allow at least 3 inches (7.6 cm) of clearance around the ventilation openings. |
Waarschuwing |
Om oververhitting van de schakelaar te voorkomen, mag u die niet bedienen in een ruimte die de maximale aanbevolen omgevingstemperatuur van 113°F (45°C) overschrijdt. Om beperking van de luchtstroom te voorkomen, dient u ten minste 3 inch (7,6 cm) speling te laten rondom de ventilatie-openingen. |
Varoitus |
Estääksesi kytkimen ylikuumenemisen älä käytä sitä sellaisissa paikoissa, joiden lämpötila ylittää ympäristön enimmäislämpötilaksi suositellun 45°C. Jätä vähintään 7,6 cm:n vapaa tila tuuletusaukkojen ympärille, jotta ilma pääsee vapaasti virtaamaan. |
Attention |
Pour éviter une surchauffe du commutateur, ne pas le faire fonctionner dans un local dont la température ambiante dépasse le maximum recommandé de 45°C (113°F). Pour faciliter la circulation d'air, aménager un dégagement d'au moins 7,6 cm (3 pouces) autour des bouches d'aération. |
Warnung |
Um eine Überhitzung des Schalters zu vermeiden, ist das System nicht in einem Bereich zu betreiben, in dem die empfohlene Höchsttemperatur von 45°C überschritten wird. Damit der Luftfluß nicht behindert wird, ist ein Freiraum von mindestens 7,6 cm um die Belüftungsöffnungen herum einzuhalten. |
Avvertenza |
Per evitare il surriscaldamento dell'interruttore, non usare l'apparecchiatura in un'area che supera la temperatura ambientale minima consigliata di 45°C. Per evitare una limitazione del flusso dell'aria, lasciare come minimo uno spazio libero di 7,6 cm intorno alle aperture di ventilazione. |
Advarsel |
For å unngå at bryteren overopphetes skal utstyret ikke brukes på steder hvor anbefalt maks omgivelsestemperatur overstiger 113 grader Farenheit (45°C). La det være minst 3 tommer (7,6 cm) klaring rundt ventilasjonsåpningene for at luftsirkulasjonen skal være uhindret. |
Aviso |
Para evitar sobreaquecimento do interruptor, não utilize o equipamento numa àrea que exceda uma temperatura máxima de 45°C. Para evitar o bloqueamento da circulação de ar, deixe pelo menos um espaço de 7.6 cm em volta das aberturas de ventilação. |
¡Advertencia! |
Para evitar que el interruptor se recaliente, no se debe usar en áreas cuya temperatura ambiente exceda la máxima recomendada, esto es, 45°C (113°F). Para no entorpecer la corriente de aire, dejar por lo menos 7,6 cm (3 pulgadas) de espacio muerto alrededor de la rejilla de ventilación. |
Varning! |
I syfte att undvika överhettning av switchen skall den inte användas i utrymmen vars temperatur överskrider den maximalt rekommenderade omgivningstemperaturen som är 45°C. Kontrollera att det finns minst 7,6 cm fritt utrymme runt ventilationsöppningarna så att luftflödet inte begränsas. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Statement 43—Jewelry Removal Warning
Warning |
Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when connected to power and ground and can cause serious burns or weld the metal object to the terminals. |
Waarschuwing |
Alvorens aan apparatuur te werken die met elektrische leidingen is verbonden, sieraden (inclusief ringen, kettingen en horloges) verwijderen. Metalen voorwerpen worden warm wanneer ze met stroom en aarde zijn verbonden, en kunnen ernstige brandwonden veroorzaken of het metalen voorwerp aan de aansluitklemmen lassen. |
Varoitus |
Ennen kuin työskentelet voimavirtajohtoihin kytkettyjen laitteiden parissa, ota pois kaikki korut (sormukset, kaulakorut ja kellot mukaan lukien). Metalliesineet kuumenevat, kun ne ovat yhteydessä sähkövirran ja maan kanssa, ja ne voivat aiheuttaa vakavia palovammoja tai hitsata metalliesineet kiinni liitäntänapoihin. |
Attention |
Avant d'accéder à cet équipement connecté aux lignes électriques, ôter tout bijou (anneaux, colliers et montres compris). Lorsqu'ils sont branchés à l'alimentation et reliés à la terre, les objets métalliques chauffent, ce qui peut provoquer des blessures graves ou souder l'objet métallique aux bornes. |
Warnung |
Vor der Arbeit an Geräten, die an das Netz angeschlossen sind, jeglichen Schmuck (einschließlich Ringe, Ketten und Uhren) abnehmen. Metallgegenstände erhitzen sich, wenn sie an das Netz und die Erde angeschlossen werden, und können schwere Verbrennungen verursachen oder an die Anschlußklemmen angeschweißt werden. |
Avvertenza |
Prima di intervenire su apparecchiature collegate alle linee di alimentazione, togliersi qualsiasi monile (inclusi anelli, collane, braccialetti ed orologi). Gli oggetti metallici si riscaldano quando sono collegati tra punti di alimentazione e massa: possono causare ustioni gravi oppure il metallo può saldarsi ai terminali. |
Advarsel |
Fjern alle smykker (inkludert ringer, halskjeder og klokker) før du skal arbeide på utstyr som er koblet til kraftledninger. Metallgjenstander som er koblet til kraftledninger og jord blir svært varme og kan forårsake alvorlige brannskader eller smelte fast til polene. |
Aviso |
Antes de trabalhar em equipamento que esteja ligado a linhas de corrente, retire todas as jóias que estiver a usar (incluindo anéis, fios e relógios). Os objectos metálicos aquecerão em contacto com a corrente e em contacto com a ligação à terra, podendo causar queimaduras graves ou ficarem soldados aos terminais. |
¡Advertencia! |
Antes de operar sobre equipos conectados a líneas de alimentación, quitarse las joyas (incluidos anillos, collares y relojes). Los objetos de metal se calientan cuando se conectan a la alimentación y a tierra, lo que puede ocasionar quemaduras graves o que los objetos metálicos queden soldados a los bornes. |
Varning! |
Tag av alla smycken (inklusive ringar, halsband och armbandsur) innan du arbetar på utrustning som är kopplad till kraftledningar. Metallobjekt hettas upp när de kopplas ihop med ström och jord och kan förorsaka allvarliga brännskador; metallobjekt kan också sammansvetsas med kontakterna. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Statement 171—Ethernet Cable Shielding in Offices
Warning |
Ethernet cables must be shielded when used in a central office environment. |
Waarschuwing |
Ethernetkabels dienen beveiligd te worden als ze in een centrale kantooromgeving worden gebruikt. |
Varoitus |
Ethernet-kaapelit täytyy suojata, kun niitä käytetään yleisessä toimistoympäristössä. |
Attention |
Pour une utilisation en site central, les câbles Ethernet doivent être impérativement blindés. |
Warnung |
Ethernet-Kabel müssen abgeschirmt werden, wenn sie in einer Zentrale eingesetzt werden. |
Avvertenza |
I cavi Ethernet devono essere schermati se utilizzati in un ambiente di ufficio centrale. |
Advarsel |
Ethernet-kabler skal være skjermet når de brukes i et sentralt kontormiljø. |
Aviso |
Os cabos "Ethernet" deverão estar armados quando usados em ambiente de escritório central. |
¡Advertencia! |
Los cables Ethernet deben estar protegidos cuando se usen dentro de una oficina central. |
Varning! |
Ethernetkablar måste vara avskärmade vid användning i central kontorsmiljö. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Statement 1001—Work During Lightning Activity
Warning |
Do not work on the system or connect or disconnect cables during periods of lightning activity. |
Waarschuwing |
Tijdens onweer dat gepaard gaat met bliksem, dient u niet aan het systeem te werken of kabels aan te sluiten of te ontkoppelen. |
Varoitus |
Älä työskentele järjestelmän parissa äläkä yhdistä tai irrota kaapeleita ukkosilmalla. |
Attention |
Ne pas travailler sur le système ni brancher ou débrancher les câbles pendant un orage. |
Warnung |
Arbeiten Sie nicht am System und schließen Sie keine Kabel an bzw. trennen Sie keine ab, wenn es gewittert. |
Avvertenza |
Non lavorare sul sistema o collegare oppure scollegare i cavi durante un temporale con fulmini. |
Advarsel |
Utfør aldri arbeid på systemet, eller koble kabler til eller fra systemet når det tordner eller lyner. |
Aviso |
Não trabalhe no sistema ou ligue e desligue cabos durante períodos de mau tempo (trovoada). |
¡Advertencia! |
No operar el sistema ni conectar o desconectar cables durante el transcurso de descargas eléctricas en la atmósfera. |
Varning! |
Vid åska skall du aldrig utföra arbete på systemet eller ansluta eller koppla loss kablar. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Statement 1004—Installation Instructions
Warning |
Read the installation instructions before connecting the system to the power source. |
Waarschuwing |
Raadpleeg de installatie-instructies voordat u het systeem op de voedingsbron aansluit. |
Varoitus |
Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen. |
Attention |
Avant de brancher le système sur la source d'alimentation, consulter les directives d'installation. |
Warnung |
Vor dem Anschließen des Systems an die Stromquelle die Installationsanweisungen lesen. |
Avvertenza |
Consultare le istruzioni di installazione prima di collegare il sistema all'alimentatore. |
Advarsel |
Les installasjonsinstruksjonene før systemet kobles til strømkilden. |
Aviso |
Leia as instruções de instalação antes de ligar o sistema à fonte de energia. |
¡Advertencia! |
Lea las instrucciones de instalación antes de conectar el sistema a la red de alimentación. |
Varning! |
Läs installationsanvisningarna innan du kopplar systemet till strömförsörjningsenheten. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Statement 1008—Class 1 Laser Product
Warning |
Class 1 laser product. |
Waarschuwing |
Klasse-1 laser produkt. |
Varoitus |
Luokan 1 lasertuote. |
Attention |
Produit laser de classe 1. |
Warnung |
Laserprodukt der Klasse 1. |
Avvertenza |
Prodotto laser di Classe 1. |
Advarsel |
Laserprodukt av klasse 1. |
Aviso |
Produto laser de classe 1. |
¡Advertencia! |
Producto láser Clase I. |
Varning! |
Laserprodukt av klass 1. |
|
|
|
|
|
|
|
|
|
|
Aviso |
Produto a laser de classe 1. |
Advarsel |
Klasse 1 laserprodukt. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Statement 1030—Equipment Installation
Warning |
Only trained and qualified personnel should be allowed to install, replace, or service this equipment. |
Waarschuwing |
Deze apparatuur mag alleen worden geïnstalleerd, vervangen of hersteld door bevoegd geschoold personeel. |
Varoitus |
Tämän laitteen saa asentaa, vaihtaa tai huoltaa ainoastaan koulutettu ja laitteen tunteva henkilökunta. |
Attention |
Il est vivement recommandé de confier l'installation, le remplacement et la maintenance de ces équipements à des personnels qualifiés et expérimentés. |
Warnung |
Das Installieren, Ersetzen oder Bedienen dieser Ausrüstung sollte nur geschultem, qualifiziertem Personal gestattet werden. |
Avvertenza |
Questo apparato può essere installato, sostituito o mantenuto unicamente da un personale competente. |
Advarsel |
Bare opplært og kvalifisert personell skal foreta installasjoner, utskiftninger eller service på dette utstyret. |
Aviso |
Apenas pessoal treinado e qualificado deve ser autorizado a instalar, substituir ou fazer a revisão deste equipamento. |
¡Advertencia! |
Solamente el personal calificado debe instalar, reemplazar o utilizar este equipo. |
Varning! |
Endast utbildad och kvalificerad personal bör få tillåtelse att installera, byta ut eller reparera denna utrustning. |
|
|
|
|
|
|
|
|
|
|
Aviso |
Somente uma equipe treinada e qualificada tem permissão para instalar, substituir ou dar manutenção a este equipamento. |
Advarsel |
Kun uddannede personer må installere, udskifte komponenter i eller servicere dette udstyr. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Statement 1040—Product Disposal
Warning |
Ultimate disposal of this product should be handled according to all national laws and regulations. |
Waarschuwing |
Het uiteindelijke wegruimen van dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen. |
Varoitus |
Tämä tuote on hävitettävä kansallisten lakien ja määräysten mukaisesti. |
Attention |
La mise au rebut ou le recyclage de ce produit sont généralement soumis à des lois et/ou directives de respect de l'environnement. Renseignez-vous auprès de l'organisme compétent. |
Warnung |
Die Entsorgung dieses Produkts sollte gemäß allen Bestimmungen und Gesetzen des Landes erfolgen. |
Avvertenza |
Lo smaltimento di questo prodotto deve essere eseguito secondo le leggi e regolazioni locali. |
Advarsel |
Endelig kassering av dette produktet skal være i henhold til alle relevante nasjonale lover og bestemmelser. |
Aviso |
Deitar fora este produto em conformidade com todas as leis e regulamentos nacionais. |
¡Advertencia! |
Al deshacerse por completo de este producto debe seguir todas las leyes y reglamentos nacionales. |
Varning! |
Vid deponering hanteras produkten enligt gällande lagar och bestämmelser. |
|
|
|
|
|
|
|
|
|
|
Aviso |
O descarte definitivo deste produto deve estar de acordo com todas as leis e regulamentações nacionais. |
Advarsel |
Endelig bortskaffelse af dette produkt skal ske i henhold til gældende love og regler. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Statement 1044—Port Connections
Warning |
For connections outside the building where the equipment is installed, the following ports must be connected through an approved network termination unit with integral circuit protection. 10/100/1000 Ethernet |
Waarschuwing |
Voor aansluitingen buiten het gebouw waar de apparatuur wordt geïnstalleerd, dienen de volgende poorten aangesloten te worden via een goedgekeurde netwerkafsluiteenheid met integrale circuitbescherming. 10/100/1000 Ethernet |
Varoitus |
Asennuksen sisältävän rakennuksen ulkopuolisia liitäntöjä varten seuraavat portit on kytkettävä hyväksytyn verkon päätelaitteen kautta ja virtapiirin on oltava kiinteästi suojattu. 10/100/1000 Ethernet |
Attention |
Pour les connexions extérieures au bâtiment équipé, les ports suivants doivent être connectés à un point approuvé de terminaison de réseau, avec protection complète du circuit. 10/100/1000 Ethernet |
Warnung |
Für Verbindungen außerhalb des Gebäudes, in dem das Gerät installiert ist, müssen die folgenden Anschlüsse über eine zulässige Netzabschlusseinheit mit integralem Leitungsschutz verbunden werden. 10/100/1000 Ethernet |
Avvertenza |
Per le connessioni esterne all'edificio in cui è installato l'apparecchio, le seguenti porte devono essere connesse a un'unità di terminazione di rete approvata, con protezione completa del circuito. 10/100/1000 Ethernet |
Advarsel |
For tilkoblinger utenfor bygningen der utstyret er montert, må følgende åpninger tilkobles gjennom en godkjent nettverksterminal med integrert kretsbeskyttelse. 10/100/1000 Ethernet |
Aviso |
Para ligações fora do edifício onde o equipamento está instalado, é necessário ligar as seguintes portas através de uma unidade de terminal de rede aprovada com protecção de circuito integral. 10/100/1000 Ethernet |
¡Advertencia! |
Para realizar conexiones en el exterior del edificio en el que esté instalado el equipo, deberá conectar los puertos especificados a continuación a una unidad terminal de red aprobada que cuente con protección de circuitos integrales. 10/100/1000 Ethernet |
Varning! |
För alla anslutningar utanför byggnaden där utrustningen har installerats gäller att följande portar måste anslutas genom en godkänd nätverksavslutningsenhet med integrerat kretsskydd. 10/100/1000 Ethernet |
|
10/100/1000 Ethernet |
|
10/100/1000 Ethernet |
|
10/100/1000 Ethernet |
|
10/100/1000 Ethernet |
|
10/100/1000 Ethernet |
|
10/100/1000 Ethernet |
|
10/100/1000 Ethernet |
|
10/100/1000 Ethernet |
|
10/100/1000 Ethernet |
|
10/100/1000 Ethernet |
|
10/100/1000 Ethernet
|
Statement 1071—Warning Definition
Warning |
IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS |
Waarschuwing |
BELANGRIJKE VEILIGHEIDSINSTRUCTIES Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen. BEWAAR DEZE INSTRUCTIES |
Varoitus |
TÄRKEITÄ TURVALLISUUSOHJEITA Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla. SÄILYTÄ NÄMÄ OHJEET |
Attention |
IMPORTANTES INFORMATIONS DE SÉCURITÉ Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement. CONSERVEZ CES INFORMATIONS |
Warnung |
WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden. BEWAHREN SIE DIESE HINWEISE GUT AUF. |
Avvertenza |
IMPORTANTI ISTRUZIONI SULLA SICUREZZA Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento. CONSERVARE QUESTE ISTRUZIONI |
Advarsel |
VIKTIGE SIKKERHETSINSTRUKSJONER Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten. TA VARE PÅ DISSE INSTRUKSJONENE |
Aviso |
INSTRUÇÕES IMPORTANTES DE SEGURANÇA Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo. GUARDE ESTAS INSTRUÇÕES |
¡Advertencia! |
INSTRUCCIONES IMPORTANTES DE SEGURIDAD Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo. GUARDE ESTAS INSTRUCCIONES |
Varning! |
VIKTIGA SÄKERHETSANVISNINGAR Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR |
|
|
|
|
|
|
|
|
|
|
Aviso |
INSTRUÇÕES IMPORTANTES DE SEGURANÇA Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham o dispositivo. GUARDE ESTAS INSTRUÇÕES |
Advarsel |
VIGTIGE SIKKERHEDSANVISNINGER Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for legemesbeskadigelse. Før du begynder arbejde på udstyr, skal du være opmærksom på de involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardprocedurer til undgåelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed. GEM DISSE ANVISNINGER |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Statement 1074—Comply with Local and National Electrical Codes
Warning |
Installation of the equipment must comply with local and national electrical codes. |
Waarschuwing |
Bij installatie van de apparatuur moet worden voldaan aan de lokale en nationale elektriciteitsvoorschriften. |
Varoitus |
Laitteisto tulee asentaa paikallisten ja kansallisten sähkömääräysten mukaisesti. |
Attention |
L'équipement doit être installé conformément aux normes électriques nationales et locales. |
Warnung |
Die Installation der Geräte muss den Sicherheitsstandards entsprechen. |
Avvertenza |
L'installazione dell'impianto deve essere conforme ai codici elettrici locali e nazionali. |
Advarsel |
Installasjon av utstyret må samsvare med lokale og nasjonale elektrisitetsforskrifter. |
Aviso |
A instalação do equipamento tem de estar em conformidade com os códigos eléctricos locais e nacionais. |
¡Advertencia! |
La instalación del equipo debe cumplir con las normativas de electricidad locales y nacionales. |
Varning! |
Installation av utrustningen måste ske i enlighet med gällande elinstallationsföreskrifter. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
European Directives
Statement 275—Declaration of Conformity with Regard to the Directives 73/23/EEC and 89/336/EEC as amended by Directive 93/68/EEC
English: |
This equipment is in compliance with the essential requirements and other provisions of Directives 73/23/EEC and 89/336/EEC as amended by Directive 93/68/EEC. |
Dansk: |
Dette udstyr er i overensstemmelse med de ufravigelige hensyn og andre bestemmelser i direktiv 73/23/EEC og 89/336/EEC som ændred i direktiv 93/68/EEC. |
Deutsch: |
Dieses Gerät entspricht den wesentlichen Anforderungen und weiteren Bestimmungen der Richtlinien 73/23/EWG und 89/336/EWG mit der Ergänzung durch Richtlinie 93/68/EWG. |
Español: |
Este equipo cumple con los requisitos esenciales y otras disposiciones de las Directrices 73/23/EEC y 89/336/EEC de acuerdo a las modificaciones de la Directriz 93/68/EEC. |
|
|
Français: |
Cet appareil remplit les principales conditions requises et autres dispositions des Directives 73/23/EEC et 89/336/EEC, modifiées par la Directive 93/68/EEC. |
Íslenska: |
Þessir búnaður samrýmist lögboðnum kröfum og öðrum ákvæðum tilskipana 73/23/EBE og 89/336/EBE, með breytingum skv. tilskipun 93/68/EBE. |
Italiano: |
Questa apparecchiatura è conforme ai requisiti essenziali e altre disposizioni delle Direttive 73/23/EEC e 89/336/EEC modificate con la Direttiva 93/68/EEC. |
Nederlands: |
Deze apparatuur voldoet aan de belangrijkste eisen en andere voorzieningen van richtlijnen 73/23/EEC en 89/336/EEC zoals gewijzigd door richtlijn 93/68/EEC. |
Norsk: |
Dette utstyret samsvarer med de vesentligste kravene og andre regler i direktivene 73/23/EEC og 89/336/EEC samt i tilleggsdirektiv 93/68/EEC. |
Português: |
Este equipamento satisfaz os requisitos essenciais e outras provisões das Directivas 73/23/EEC e 89/336/EEC, conforme amendados pela Directiva 93/68/EEC. |
|
Cisco Catalyst Blade Switch 3000 Series for HP |
Suomalainen: |
Tämä laite on direktiivien 73/23/ETY ja 89/336/ETY (kuten muutettu direktiivissä 93/68/ETY) keskeisten vaatimusten ja määräysten mukainen. |
Svenska: |
Denna utrustning uppfyller de väsentliga kraven och andra villkor i direktiven 73/23/EEC och 89/336/EEC enligt ändringarna i direktiv 93/68/EEC. |
Regulatory Standards Compliance
This section includes all regulatory, safety, EMC, telecom, and NEBS standards. The Cisco Catalyst Blade Switch 3000 Series for HP is in compliance with national and international standards as described in Table 1.
Table 1 Regulatory Standards Compliance for the Cisco Catalyst Blade Switch
3000 Series for HP
Specification
|
Description
|
Regulatory Compliance |
Products with the CE Marking are compliant with the 89/336/EEC and 73/23/EEC directives, which include the safety and EMC standards listed. |
Safety |
UL 60950-1 CAN/CSA-C22.2 No. 60950-1 EN 60950-1 IEC 60950-1 AS/NZS 60950-1 IEC 60825-1 IEC 60825-2 EN 60825-1 EN 60825-2 21 CFR 1040 FCC OET 65 FCC OET 65-C RSS-102 |
EMC |
47CFR Part 15 (FCC) Class A AS/NZS 3548 Class A AS/NZS CISPR22 Class A CISPR22 Class A CNS13438 Class A EN55022 Class A ICES003 Class A VCCI Class A EN50082-1 EN50082-2 EN61000-6-1 EN61000-6-2 EN55024 EN300386 EN61000-3-2 EN61000-3-3 ETS300386-1/ES201468 CISPR24 EN 301-489-1 EN 301-489-17 |
For specific details about the years, revisions and relevant amendments please refer to the applicable declaration of conformity available at http://www.cisco.com.
The Cisco Catalyst Blade Switch 3000 Series for HP meets the industry EMC, safety, and environmental standards described in Table 2.
Table 2 Industry EMC, Safety, and Environmental Standards
Specification
|
Description
|
NEBS |
GR-63-Core NEBS Level 3 GR-1089-Core NEBS Level 3 |
ETSI |
ETS 300 019-1-1, Class 1.2 Storage ETS 300 019-1-2, Class 2.3 Transportation ETS 300 019-1-3, Class 3.2 Stationary Use |
EMC Environmental Conditions for Products Installed in the European Union
This section applies to products to be installed in the European Union.
The equipment is intended to operate under the following environmental conditions with respect to EMC:
•A separate defined location under user's control.
•Earthing and bonding shall meet the requirements of ETS 300 253 or CCITT K27.
•AC power distribution shall be one of the following types, where applicable: TN-S and TN-C as defined in IEC 364-3.
In addition, if equipment is operated in a domestic environment, interference may occur.
EMC Class A Notices and Warnings
This section includes the EMC Class A warnings for the Cisco Catalyst Blade Switch 3000 Series for HP:
•Class A Notice for FCC
•Class A Notice for Canada
•Statement 191—VCCI Class A Warning for Japan
•Statement 256—Class A Warning for Hungary
•Statement 257—Class A Notice for Taiwan and Other Traditional Chinese Markets
•Statement 294—Class A Warning for Korea
•Statement 340—Class A Warning for CISPR22
Class A Notice for FCC
Modifying the equipment without Cisco's authorization may result in the equipment no longer complying with FCC requirements for Class A digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case users will be required to correct the interference at their own expense.
Class A Notice for Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Statement 191—VCCI Class A Warning for Japan
Warning |
This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective actions. |
|
|
Statement 256—Class A Warning for Hungary
Warning |
This equipment is a class A product and should be used and installed properly according to the Hungarian EMC Class A requirements (MSZEN55022). Class A equipment is designed for typical commercial establishments for which special conditions of installation and protection distance are used. |
|
|
Statement 257—Class A Notice for Taiwan and Other Traditional Chinese Markets
Warning |
This is a Class A Information Product, when used in residential environment, it may cause radio frequency interference, under such circumstances, the user may be requested to take appropriate countermeasures. |
|
|
Statement 294—Class A Warning for Korea
Warning |
This is a Class A Device and is registered for EMC requirements for industrial use. The seller or buyer should be aware of this. If this type was sold or purchased by mistake, it should be replaced with a residential-use type. |
|
|
Statement 340—Class A Warning for CISPR22
Warning |
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. |
Waarschuwing |
Dit is een product van klasse A. In een woonomgeving kan dit product radiostoring veroorzaken. In dat geval moet de gebruiker de juiste maatregelen nemen. |
Varoitus |
Tämä on A-luokan tuote. Kotona käytettynä tämä tuote voi aiheuttaa radiotaajuushäiriöitä, jolloin käyttäjän tulisi ryhtyä vaadittaviin toimenpiteisiin häiriöiden ehkäisemiseksi. |
Attention |
Il s'agit d'un produit de classe A. Dans un environnement local, ce produit peut entraîner des perturbations radioélectriques, auquel cas l'utilisateur devra éventuellement prendre des mesures adéquates. |
Warnung |
Dies ist ein Produkt der Klasse A. Bei der Verwendung dieses Produkts im Haus- oder Wohnungsbereich kann es zu Funkstörungen kommen. In diesem Fall muss der Benutzer u. U. angemessene Maßnahmen ergreifen. |
Avvertenza |
Prodotto di classe A. È possibile che il prodotto generi interferenze radio in un ambienti chiusi. In questo caso l'utente deve intraprendere le misure adeguate per risolvere il problema. |
Advarsel |
Dette er et produkt i klasse A. I et hjemmemiljø kan dette produktet forårsake radioforstyrrelser, og brukeren kan da være nødt til å ta de nødvendige forholdsregler. |
Aviso |
Este é um produto de classe A. Em um ambiente doméstico, este produto pode causar interferência de rádio. Nesse caso, talvez o usuário precise tomar as medidas adequadas. |
¡Advertencia! |
Este es un producto de clase A. En el ámbito doméstico, este producto puede causar radiointerferencias, lo que puede hacer necesaria la puesta en marcha de medidas adecuadas. |
Varning! |
Detta är en klass A-produkt. Denna produkt kan orsaka radiostörningar inomhus. Det kan då vara ett krav att användaren vidtar lämpliga åtgärder. |
|
|
|
|
|
|
|
|
|
|
Related Documentation
These publications provide more information about the Cisco Cisco Catalyst Blade Switch 3000 Series for HP:
•Release Notes for the Cisco Catalyst Blade Switch 3120 for HP and the Release Notes for the Cisco Catalyst Blade Switch 3020 for HP (not orderable but available on Cisco.com)
•Cisco Catalyst Blade Switch 3000 Series for HP Getting Started Guide (not orderable but available on Cisco.com)
•Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide and the Cisco Catalyst Blade Switch 3020 for HP Hardware Installation Guide (not orderable but available on Cisco.com)
•Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide and the Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide (not orderable but available on Cisco.com)
•Cisco Catalyst Blade Switch 3120 for HP Command Reference and the Cisco Catalyst Blade Switch 3020 for HP Command Reference (not orderable but available on Cisco.com)
•Cisco Catalyst Blade Switch 3120 for HP System Message Guide and the Cisco Catalyst Blade Switch 3020 for HP System Message Guide (not orderable but available on Cisco.com)
•Cisco Software Activation Document for HP (not orderable, but available on Cisco.com)
Obtaining Documentation, Obtaining Support, and Security Guidelines
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
CCVP, the Cisco logo, and the Cisco Square Bridge logo are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, LightStream, Linksys, MeetingPlace, MGX, Networking Academy, Network Registrar, PIX, ProConnect, ScriptShare, SMARTnet, StackWise, The Fastest Way to Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0709R)