Table Of Contents
Release Notes for Cisco SN iSCSI Driver for Microsoft Windows 2000 Version 1.8.10
October 3, 2001
Note You can find the most current documentation on Cisco.com. This set of electronic documents may contain updates and modifications made after the hard-copy documents were printed.
These release notes support Cisco Storage Networking iSCSI Driver for Microsoft Windows 2000 version 1.8.10. The iSCSI Driver for Microsoft Windows 2000 version 1.8.10 supersedes version 1.8.8; there is no released iSCSI Driver for Microsoft Windows 2000 version 1.8.9.
For a list of software caveats that apply to version 1.8.10, see the "Caveats" section. The caveats are updated for every maintenance version and are located on Cisco.com and the Documentation CD-ROM.
These Release Notes describe the following topics:
The Cisco Storage Networking iSCSI Driver for Microsoft Windows 2000 provides a server with the ability to access storage through an IP network. The iSCSI driver uses iSCSI protocol to transport SCSI requests and responses over an IP network between the server and a Cisco SN 5420 Storage Router.
Architecturally, the iSCSI driver combines with the server TCP/IP stack, network drivers, and NICs to provide the same functions as a SCSI adapter driver with a host bus adapter (HBA).
The iSCSI driver provides a transport for SCSI requests and responses for storage devices; however, instead of providing a transport for directly attached devices, the driver transports the SCSI requests and responses between the server and a Cisco SN 5420 Storage Router via an IP network. The SN 5420 Storage Router, in turn, transports SCSI requests and responses between it and the storage devices attached to it.
Once the iSCSI driver is installed, the server will proceed with a discovery process for iSCSI storage devices as follows:
Step 1 The iSCSI driver requests available iSCSI targets from the storage router.
Step 2 The storage router sends available iSCSI target names to the server.
Step 3 The server logs into the iSCSI targets.
Step 4 The storage router accepts the server login and sends target identifiers.
Step 5 The server queries targets for device information.
Step 6 Targets respond with device information.
Step 7 The server creates table of internal devices.
The Cisco Storage Networking iSCSI Driver for Microsoft Windows 2000 provides IP access to a maximum of eight remote SCSI targets, with each target capable of supporting 32 LUNs. Remote SCSI targets can be accessed through one or more storage routers up to a maximum of eight storage routers.
Note The iSCSI protocol is an IETF-defined protocol for IP storage (ips). For more information about the iSCSI protocol, refer to the IETF standards for IP storage at http://www.ietf.org.
This section describes the system requirements for version 1.8.10 and includes the following information:
Operating System Requirements
The Cisco Storage Networking iSCSI Driver for Microsoft Windows 2000 requires Microsoft Windows 2000 Professional or Server with service pack 2 or higher. If service pack 2 is installed, Microsoft hotfix Q302895 is required. This fix does not appear on the Microsoft hotfix website; you must specifically request it. This fix will eventually be bundled into Microsoft Windows 2000 service pack 3.
Note If you are running Microsoft Windows 2000 Professional or Server withservice pack 1, you must upgrade to service pack 2 and apply the Microsoft hotfix Q302895.
To obtain hotfix Q302895, call Microsoft customer support at 1-800-936-4900 (or any Microsoft customer support phone number) and request the hotfix for Knowledge Base (KB) article Q302895. You will be asked to supply an e-mail address. You will receive an e-mail message with a link to an FTP site where you can download the hotfix. The e-mail message will also contain a password that you will be prompted to enter when you open the hotfix file.
For additional information about the hotfix, access the Microsoft website at http://www.microsoft.com and follow the support link to view KB article Q302895.
The Cisco Storage Networking iSCSI Driver for Microsoft Windows 2000 supports multiple processors, and may be run on up to four multiprocessors.
Note This driver will not work with computers running Microsoft Windows NT.
Obtaining the iSCSI Driver
The Cisco Storage Networking iSCSI drivers, accompanying readme files, release notes and example configuration files are available for download to the general public and registered users of Cisco.com. Access the appropriate URL, as follows:
Access Type URL
Registered Cisco.com users
(You will be prompted to enter your user name and password.)
In addition, you can check these websites for information about the availability of new drivers, updated drivers, driver compatibility, and other relevant information.
Note URLs are subject to change without notice. If the URL changes, go to http://www.cisco.com and click Software Center at Service & Support. At Software Center, click Storage Networking Software. Then, at Storage Networking Software, click Cisco SN 5420 Storage Router Software. If you are a registered Cisco.com user, be sure to log in first.
Determining the iSCSI Driver Version
To determine the version of the iSCSI driver software installed on your server, open Control Panel and double-click the iSCSI Config icon. The lower left corner of the dialog box shows the version number of the iSCSI Config program and the title bar shows the operating system it is intended for. Click Status to show the version information of the iSCSI driver on the top line.
You can also verify version information by checking the file versions of these files:
Follow these steps:
Step 1 Use Windows Explorer to navigate to the c:\winnt\system32\drivers directory.
Step 2 Right-click the file iscsi.sys and then click Properties from the shortcut menu. The Properties dialog box displays.
Step 3 Click the Version tab, and check the File version.
Step 4 Navigate to the c:\winnt\system32\ directory.
Step 5 Right-click the file iscsicfg.cpl and then click Properties from the shortcut menu. The Properties dialog box displays.
Step 6 Click the Version tab, and check the File version. The file version information should be the same in both files.
Upgrading to a New Version
To upgrade to a new version of iSCSI driver software, follow these instructions:
Step 1 Run the setup.exe executable for the new iSCSI driver to start the installation program.
Step 2 Follow the on-screen instructions to upgrade the iSCSI driver software.
Uninstalling iSCSI Driver Software
To uninstall iSCSI driver software, follow these instructions:
Step 1 Run the setup.exe executable for the currently installed iSCSI driver to start the installation program.
Step 2 Follow the on-screen instructions to remove the iSCSI driver software.
This document lists caveats for Cisco Storage Networking iSCSI Driver for Microsoft Windows 2000 version 1.8.10. Caveats describe unexpected behavior or defects in iSCSI software versions. Severity 1 caveats are the most serious caveats; severity 2 caveats are less serious.
This document describes open and resolved severity 1 and 2 caveats and selected caveats of other severities:
•The "Open Caveats" section lists open caveats that apply to the current version and may apply to previous versions.
•The "Closed Caveats" section list caveats resolved in this version, but open in previous versions.
Within the sections, the caveats are sorted alphanumerically by caveat number.
Note If you have an account with Cisco.com, you can use Bug Navigator II to find caveats of any severity for any version. You can reach Bug Navigator II on Cisco.com at Service & Support: http://www.cisco.com/support/bugtools.
The iSCSI driver for Microsoft Windows 2000 version 1.8.10 has no open severity 1 or 2 caveats.
For a more complete list of caveats against this release, access Cisco.com as described in the section "Cisco.com" at the end of this document.
All the caveats listed in this section are resolved in iSCSI driver version 1.8.10. This section describes severity 1 and 2 caveats and selected caveats of other severity levels.
The iSCSI driver for Microsoft Windows 2000 Microsoft hotfix Q302895. If the installation process check for this hotfix fails, it generates an error message indicating that hotfix Q280114 is required. This was the original hotfix number supplied by Microsoft, prior to the generation of the public Knowledge Base article.
Workaround: Ignore the hotfix number in the error message and install Microsoft hotfix Q302895.
The following sections describe the related documentation available for the Cisco Storage Networking iSCSI Driver for Windows 2000 version 1.8.10 and the Cisco SN 5420 Storage Router. These documents consist of the iSCSI driver release notes, readme and example configuration files, and the storage router hardware installation and software configuration guides.
The storage router hardware installation and software configuration documentation sets are available as printed manuals or electronic documents. The iSCSI driver readme file and example configuration file are available in electronic format, as part of the software download package. See the "Obtaining the iSCSI Driver" section for details.
This Release Notes document is the only document specific to Cisco Storage Networking iSCSI Driver for Microsoft Windows 2000 version 1.8.10. It is located on Cisco.com and the Documentation CD-ROM.
Each release of storage router software includes an associated Release Notes document, which is also available as an electronic document on Cisco.com and the Documentation CD-ROM.
Refer to the Cisco SN 5420 Storage Router Hardware Installation Guide for storage router hardware installation procedures. This document is available as a printed manual. It is also available as an electronic document on Cisco.com and the Documentation CD-ROM.
Refer to the Cisco SN 5420 Storage Router Software Configuration Guide for storage router software configuration information and procedures. This document is available as a printed manual. It is also available as an electronic document onCisco.com and the Documentation CD-ROM.
For documentation on the storage router web-based GUI, refer to the SN 5420 Storage Router web-based GUI online Help system.
Service and Support
For service and support for a product purchased from a reseller, contact the reseller, who offers a wide variety of Cisco service and support programs described in "Service and Support" of Cisco Information Packet shipped with your product.
Note If you purchased your product from a reseller, you can access Cisco.com as a guest. Cisco.com is Cisco Systems' primary real-time support channel. Your reseller offers programs that include direct access to Cisco.com services.
For service and support for a product purchased directly from Cisco, use Cisco.com.
The following sections explain how to obtain documentation from Cisco Systems.
World Wide Web
You can access the most current Cisco documentation on the World Wide Web at the following URL:
Translated documentation is available at the following URL:
Cisco documentation and additional literature are available in a Cisco Documentation CD-ROM package, which is shipped with your product. The Documentation CD-ROM is updated monthly and may be more current than printed documentation. The CD-ROM package is available as a single unit or through an annual subscription.
Cisco documentation is available in the following ways:
•Registered Cisco Direct Customers can order Cisco product documentation from the Networking Products MarketPlace:
•Registered Cisco.com users can order the Documentation CD-ROM through the online Subscription Store:
•Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco corporate headquarters (California, USA) at 408 526-7208 or, elsewhere in North America, by calling 800 553-NETS (6387).
If you are reading Cisco product documentation on Cisco.com, you can submit technical comments electronically. Click Leave Feedback at the bottom of the Cisco Documentation home page. After you complete the form, print it out and fax it to Cisco at 408 527-0730.
You can e-mail your comments to email@example.com.
To submit your comments by mail, use the response card behind the front cover of your document, or write to the following address:
Attn: Document Resource Connection
170 West Tasman Drive
San Jose, CA 95134-9883
We appreciate your comments.
Obtaining Technical Assistance
Cisco provides Cisco.com as a starting point for all technical assistance. Customers and partners can obtain documentation, troubleshooting tips, and sample configurations from online tools by using the Cisco Technical Assistance Center (TAC) Web Site. Cisco.com registered users have complete access to the technical support resources on the Cisco TAC Web Site.
Cisco.com is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information, networking solutions, services, programs, and resources at any time, from anywhere in the world.
Cisco.com is a highly integrated Internet application and a powerful, easy-to-use tool that provides a broad range of features and services to help you to
•Streamline business processes and improve productivity
•Resolve technical issues with online support
•Download and test software packages
•Order Cisco learning materials and merchandise
•Register for online skill assessment, training, and certification programs
You can self-register on Cisco.com to obtain customized information and service. To access Cisco.com, go to the following URL:
Technical Assistance Center
The Cisco TAC is available to all customers who need technical assistance with a Cisco product, technology, or solution. Two types of support are available through the Cisco TAC: the Cisco TAC Web Site and the Cisco TAC Escalation Center.
Inquiries to Cisco TAC are categorized according to the urgency of the issue:
•Priority level 4 (P4)—You need information or assistance concerning Cisco product capabilities, product installation, or basic product configuration.
•Priority level 3 (P3)—Your network performance is degraded. Network functionality is noticeably impaired, but most business operations continue.
•Priority level 2 (P2)—Your production network is severely degraded, affecting significant aspects of business operations. No workaround is available.
•Priority level 1 (P1)—Your production network is down, and a critical impact to business operations will occur if service is not restored quickly. No workaround is available.
Which Cisco TAC resource you choose is based on the priority of the problem and the conditions of service contracts, when applicable.
Cisco TAC Web Site
The Cisco TAC Web Site allows you to resolve P3 and P4 issues yourself, saving both cost and time. The site provides around-the-clock access to online tools, knowledge bases, and software. To access the Cisco TAC Web Site, go to the following URL:
All customers, partners, and resellers who have a valid Cisco services contract have complete access to the technical support resources on the Cisco TAC Web Site. The Cisco TAC Web Site requires a Cisco.com login ID and password. If you have a valid service contract but do not have a login ID or password, go to the following URL to register:
If you cannot resolve your technical issues by using the Cisco TAC Web Site, and you are a Cisco.com registered user, you can open a case online by using the TAC Case Open tool at the following URL:
If you have Internet access, it is recommended that you open P3 and P4 cases through the Cisco TAC Web Site.
Cisco TAC Escalation Center
The Cisco TAC Escalation Center addresses issues that are classified as priority level 1 or priority level 2; these classifications are assigned when severe network degradation significantly impacts business operations. When you contact the TAC Escalation Center with a P1 or P2 problem, a Cisco TAC engineer will automatically open a case.
To obtain a directory of toll-free Cisco TAC telephone numbers for your country, go to the following URL:
Before calling, please check with your network operations center to determine the level of Cisco support services to which your company is entitled; for example, SMARTnet, SMARTnet Onsite, or Network Supported Accounts (NSA). In addition, please have available your service agreement number and your product serial number.
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
AccessPath, AtmDirector, Browse with Me, CCIP, CCSI, CD-PAC, CiscoLink, the Cisco Powered Network logo, Cisco Systems Networking Academy, the Cisco Systems Networking Academy logo, Fast Step, Follow Me Browsing, FormShare, FrameShare, GigaStack, IGX, Internet Quotient, IP/VC, iQ Breakthrough, iQ Expertise, iQ FastTrack, the iQ Logo, iQ Net Readiness Scorecard, MGX, the Networkers logo, Packet, RateMUX, ScriptBuilder, ScriptShare, SlideCast, SMARTnet, TransPath, Unity, Voice LAN, Wavelength Router, and WebViewer are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, Discover All That's Possible, and Empowering the Internet Generation, are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, the Cisco IOS logo, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Enterprise/Solver, EtherChannel, EtherSwitch, FastHub, FastSwitch, IOS, IP/TV, LightStream, MICA, Network Registrar, PIX, Post-Routing, Pre-Routing, Registrar, StrataView Plus, Stratm, SwitchProbe, TeleRouter, and VCO are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries.
All other trademarks mentioned in this document or Web site are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0108R)
Copyright © 2001, Cisco Systems, Inc.
All rights reserved.