Converged Plantwide Ethernet (CPwE) Design and Implementation Guide
Reference Documents
Downloads: This chapterpdf (PDF - 156.0KB) The complete bookPDF (PDF - 18.93MB) | Feedback

Reference Documents

Table Of Contents

Reference Documents

About Cisco Validated Design (CVD) Program


Reference Documents


For information on SSH configuration, refer to the following URL:

http://www.cisco.com/en/US/partner/tech/tk583/tk617/technologies_tech_note09186a00800949e2.shtml

For information on management interface configuration, refer to the following URL:

http://www.cisco.com/en/US/partner/products/hw/switches/ps700/products_tech_note09186a008010e9ca.shtml#topic7

For information on switch images, refer to the following URL:

http://www.cisco.com/en/US/partner/products/hw/switches/ps700/products_tech_note09186a008015bfab.shtml

For information on understanding and troubleshooting HSRP problems in Catalyst switch networks, refer to the following URL:

http://www.cisco.com/en/US/partner/tech/tk648/tk362/technologies_tech_note09186a0080094afd.shtml

About Cisco Validated Design (CVD) Program

The CVD program consists of systems and solutions designed, tested, and documented to facilitate faster, more reliable, and more predictable customer deployments. For more information visit www.cisco.com/go/designzone.

ALL DESIGNS, SPECIFICATIONS, STATEMENTS, INFORMATION, AND RECOMMENDATIONS (COLLECTIVELY, "DESIGNS") IN THIS MANUAL ARE PRESENTED "AS IS," WITH ALL FAULTS. CISCO AND ITS SUPPLIERS DISCLAIM ALL WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE. IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THE DESIGNS, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

THE DESIGNS ARE SUBJECT TO CHANGE WITHOUT NOTICE. USERS ARE SOLELY RESPONSIBLE FOR THEIR APPLICATION OF THE DESIGNS. THE DESIGNS DO NOT CONSTITUTE THE TECHNICAL OR OTHER PROFESSIONAL ADVICE OF CISCO, ITS SUPPLIERS OR PARTNERS. USERS SHOULD CONSULT THEIR OWN TECHNICAL ADVISORS BEFORE IMPLEMENTING THE DESIGNS. RESULTS MAY VARY DEPENDING ON FACTORS NOT TESTED BY CISCO.