Table of Contents
These release notes are for use with the Cisco Security Monitoring, Analysis, and Response System (MARS) Release 6.2.2, running on any supported MARS Appliance model listed in Supported Hardware.
Note Release 6.2.2 will be the last update for the Cisco Security Monitoring, Analysis, and Response System. For more information about EOL/EOS for CS-MARS, see http://www.cisco.com/c/en/us/products/collateral/security/security-monitoring-analysis-response-system/eol_c51-636888.html.
Release 6.2.2 is now available as an upgrade of 6.2.1 of your software release in support of the MARS Appliance models as identified in Supported Hardware. Registered SMARTnet users can obtain release 6.2.2 from the Cisco support website at the following URL:
Open the page and then click the Download Software for this Product link under the Support heading on the right side of the MARS product home page.
- Cisco Security MARS 25R (CS-MARS-25R-K9)
- Cisco Security MARS 25 (CS-MARS-25-K9)
- Cisco Security MARS 55 (CS-MARS-55-K9)
- Cisco Security MARS 110R (CS-MARS-110R-K9)
- Cisco Security MARS 110 (CS-MARS-110-K9)
- Cisco Security MARS 210 (CS-MARS-210-K9)
The MARS upgrade packages are the primary vehicle for major, minor, and patch software releases. In addition to addressing high-priority caveats, upgrade packages update system inspection rules, event types, and provide the most recent signature support.
For detailed instructions on planning and performing an upgrade or installation, refer to “ Checklist for Upgrading the Appliance Software ” in the Cisco Security MARS Initial Configuration and Upgrade Guide .
To ensure that the upgrade from earlier releases is trouble free, this section contains the notes provided in previous releases according the release number. Please refer to the notes that pertain to the release you are upgrading from and any releases following that one.
- If you are upgrading from Windows 2003 to Windows 2008, ensure that any ancillary devices and software you employ are supported. For more information see Supported and Interoperable Devices and Software for Cisco Security MARS Local Controller 6.x.
- When downloading software packages from CCO to MARS, ensure that your credentials (username or password) do not include the ampersand (&) character. The credential will be truncated before being passed to the authentication module, which results in an error message about invalid user credentials.
- The MARS Appliance performs a file system consistency check (fsck) on all disks when either of the following conditions is met:
The fsck operation takes a long time to complete, which can result in significant unplanned downtime when rebooting the system after meeting a condition above. For example, a MARS 50 appliance can take up to 90 minutes to perform the operation.
The upgrade process to 6.0.1 differs based on the release you are upgrading from. If you are upgrading a 5.x release, you can upgrade to 6.0.1 if you are running 5.3.6. The upgrade from 5.3.6 to 6.0.1 takes several hours, as it also upgrades the Oracle database running on the appliance. If you are running an earlier 5.x release, you must first upgrade to 5.3.6.
However, if you are upgrading a 4.x release, you must migrate the system instead of upgrading. To migrate from a 4.x, you must follow the step-by-step instructions specified in the Migrating Data from Cisco Security MARS 4.x to 6.0.1 .
Note When upgrading a “restricted” model of MARS appliance (20R, 100e, or GCm) to MARS Software release 6.0.1, all limits enforced by the restricted model are ignored. The “restricted” models perform as unrestricted models (20, 100, or GC) once upgraded to release 6.0.1.
When upgrading from one software release to another, a prerequisite release is always required. This prerequisite release is the minimum level required to be running on the appliance before you can upgrade to the most recent release. Table 1 identifies the upgrade path that you must follow to reach the minimum level required to upgrade to current release.
Migration required . See Migrating Data from Cisco Security MARS 4.x to 6.0.1
Upgrade images and supporting software are found on the CCO software download pages dedicated to MARS. You can access these pages at the following URLs, assuming you have a valid CCO account and that you have registered your SMARTnet contract number for your MARS Appliance:
- CS-MARS IPS Signature Updates Archives
- CS-MARS IPS Signature Updates
- CS-MARS Patches and Utilities (supplementary files)
- CS-MARS Recovery Software
- CS-MARS Upgrade Packages
Note If you are upgrading from a release earlier than those posted on CCO, please contact Cisco support for information on obtaining the required images. Do not attempt to skip releases along the upgrade path.
The Cisco Security MARS 6.x Documentation Guide and Warranty details user documentation for this release.
For your convenience in locating caveats using Cisco’s Bug Search Tool, the caveat titles listed in this section are drawn directly from the Bug Search Tool database. These caveat titles are not intended to be read as complete sentences because the title field length is limited. In the caveat titles, some truncation of wording or punctuation may be necessary to provide the most complete and concise description. The only modifications made to these titles are as follows:
- Commands are in boldface type.
- Product names and acronyms may be standardized.
- Spelling errors and typos may be corrected.
Note If you are a registered cisco.com user, view the Bug Search Tool on cisco.com at the following website:
To become a registered cisco.com user, go to the following website:
- Open Caveats for Supporting Devices
- Open Caveats—Release 6.2.2
- Resolved Caveats—Release 6.2.2
- Resolved Caveats—Releases Prior to 6.2.2
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation at: http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html .
Subscribe to What’s New in Cisco Product Documentation , which lists all new and revised Cisco technical documentation, as an RSS feed and deliver content directly to your desktop using a reader application. The RSS feeds are a free service.