Table Of Contents
Cisco Security Manager UCS Server Bundles Release Notes
First Published: August 22, 2011Revised: March 5, 2012OL-24993-02
Caution Your Cisco Security Manager license is provided in paper format and is packed in your shipping carton along with your new Bundle itself. Please take care that it is not inadvertently discarded or lost.
Caution Recovery media (2 CDs) are provided with your new Bundle. Please take care that they are not inadvertently discarded or lost.
These release notes are intended for use with Cisco Security Manager UCS Server Bundles.
Updates to these release notes, if any, are available on Cisco.com at the following URL: http://www.cisco.com/en/US/products/ps6498/prod_release_notes_list.html.
Cisco Security Manager UCS Server Bundles ("Bundle") is not an appliance. It is a software and hardware bundle that was developed by Cisco Systems, Inc., for users of Cisco Security Manager 4.1. In brief, the Bundle consists of a Cisco UCS C210 M2 server on which has been installed Microsoft Windows Server 2008 R2 Enterprise Service Pack 1 and Cisco Security Manager 4.1.
Note Two hardware configurations are available for this Bundle. However, these release notes (and all the documentation referred to in them) applies to both of the available hardware configurations. The two hardware configurations are low-end (16 GB Cisco UCS C210 M2) and high-end (24 GB Cisco UCS C210 M2).
Cisco recommends that you read these release notes and the documentation that you will find packed in your shipping carton along with your new Bundle itself, especially the poster titled "Cisco UCS 200 and Cisco UCS 210 Servers."
Also, please be sure to refer to the "Related Documentation" section of these release notes and to check Cisco.com periodically for updates in the technical documentation for this Bundle.
Deployment Mode—Standard Only; No HA or DR
The Bundle is meant for standard deployment only: It does not provide support for high availability (HA) mode or disaster recovery (DR) mode; those modes require the installation of Veritas, which is not part of this bundle.
Steps to Get Up and Running with Cisco Security Manager
Some early printed versions of the user document Cisco Security Manager UCS Server Bundles Quick Start Guide ("Quick Start Guide") had an incomplete list of the contents of the shipping carton. The lists in the following text are complete:
•Verify that your shipping carton contains the following items:
–the server itself,
–the driver and utility disc,
–the AC power cord (optional, up to two),
–KVM console cable, and
–Bundle accessory kit.
•Verify that the Bundle accessory kit in your shipping carton contains the following items:
–this "Quick Start Guide,"
–the Cisco Security Manager license in paper format,
–the Microsoft end-user license agreement in paper format,
–the recovery media (2 CDs), and
–the Microsoft Certificate of Authenticity (COA) label (the COA label is placed on the recovery media.
Usernames and Passwords
For the OS (Microsoft Windows Server 2008 R2 Enterprise Service Pack 1), as installed on your new Bundle before it was shipped to you, the following information applies:
•Default Windows username/password: Administrator/cisco@123
Windows Activation, Product Key, and EULA
Some early printed versions of the user document Cisco Security Manager UCS Server Bundles Quick Start Guide ("Quick Start Guide") did not specify which key to use to activate Windows. The following information applies:
•To activate the OS, use the Physical Key. Do not use the Virtual Key. Refer to the following illustration:
Updates and Service Packs for the UCS Server
Some early printed versions of the user document Cisco Security Manager UCS Server Bundles Quick Start Guide ("Quick Start Guide") did not discuss updates and service packs for the UCS server. The following information applies:
•Cisco periodically releases updates and service packs for its UCS servers. As the administrator of the Cisco UCS Server which forms part of this Bundle, you are responsible for the necessary updates and service packs, which you can obtain by visiting http://www.cisco.com/go/ucs. The direct links are as follows:
–Cisco UCS C210 M2 General-Purpose Rack-Mount Server: http://www.cisco.com/cisco/software/type.html?mdfid=283001983&catid=282558030
–Cisco UCS C210 M2 Rack-Mount Server Software: http://www.cisco.com/cisco/software/type.html?mdfid=283862069&catid=282558030
If You Need to Return Your Bundle to Cisco
If you need to return your Bundle to Cisco because of hardware failure or some other reason that requires you to request an RMA, please note the following:
•When returning your Bundle to Cisco, be sure to include everything that was shipped to you. In particular, please be sure to return the recovery media; the Microsoft Certificate of Authenticity (COA) label is placed on the recovery media sleeve and must be returned.
Documentation for the Software in this Bundle (Cisco Security Manager 4.1)
•"Guide to User Documentation for Cisco Security Manager 4.1" identifies and links to the various documents available for Cisco Security Manager http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_manager/4.1/roadmap/CSM41Map.html
•Cisco Security Manager main page on Cisco.com: http://www.cisco.com/go/csmanager
•"Getting Started," Chapter 1 in the User Guide for Cisco Security Manager: http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_manager/4.1/user/guide/wfplan.html
Documentation for the Hardware in this Bundle (Cisco UCS C-Series Rack-Mount Servers)
•"Cisco UCS 200 and Cisco UCS 210 Servers" [poster, Cisco 78-20053-01], which is packed in your shipping carton along with your new Bundle itself
•"Cisco UCS C-Series Servers Documentation Roadmap" describes the user documentation available for Cisco Unified Computing System (UCS) rack mount servers: http://www.cisco.com/en/US/docs/unified_computing/ucs/overview/guide/UCS_rack_roadmap.html
•"Unified Computing and Servers" main page on Cisco.com: http://www.cisco.com/go/ucs
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
Subscribe to the What's New in Cisco Product Documentation as an RSS feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service. Cisco currently supports RSS Version 2.0.
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2011-2012 Cisco Systems, Inc. All rights reserved.