The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
A
About link 4-2
ActiveX controls 4-2
audio
controls in Camera Video & Control window 4-6
B
brightness 4-7
C
camera
See IP camera
camera settings
picture adjustments
brightness 4-7
contrast 4-7
saturation 4-8
sharpness 4-8
white balance 4-8
Camera Video/Control window
accessing 4-5
description 4-2
displaying 4-2
Cisco SD utility, downloading 4-13
connecting, to the IP camera
for the first time 3-1
PC requirements for 3-1
contrast 4-7
D
decrypting video files 4-15
deleting files from SD memory card 4-14
DHCP, obtaining IP address through 3-1
downloading video files from SD memory card 4-14
F
factory reset 4-4
focus/zoom
accessing controls 4-11
controls 4-11
formatting SD memory card 4-13
H
help, for IP camera windows 4-2
Home window
description 4-2
displaying 4-1
HTTP
allowing access through 3-2
I
installing
IP camera 2-1
mounting to ceiling or wall 2-10
warnings 2-1
IP address
default for IP camera 3-1
obtaining from DCHP server 3-1
IP camera
accessing through a web browser 3-1
connecting to for the first time 3-1
installation 2-1
mounting to ceiling or wall 2-10
warnings 2-1
logging out of 4-2
panning 4-5
powering off 4-4
powering on 4-4
tilting 4-5
windows 4-2
L
live video
viewing
through home window 4-4
through third-party device or software 4-4
See also video
local storage
Cisco SD utility, downloading 4-13
decrypting video files 4-15
managing 4-12
SD memory card
deleting video files from 4-14
downloading video files from 4-14
formatting 4-13
log out, of IP camera 4-2
M
microphone
muting PC 4-6
PC 4-6
sensitivity 4-7
motion detection
accessing controls 4-7, 4-10, 4-12
enabling 4-10
Motion detection controls 4-10, 4-12
mounting to ceiling or wall 2-10
muting
PC microphone 4-6
PC speaker 4-6
P
panning 4-5
password
requirements for 3-2
picture adjustments
brightness 4-7
contrast 4-7
saturation 4-8
sharpness 4-8
white balance 4-8
power
adapter 2-1
powering off the IP camera 4-4
powering on the IP camera 4-4
Power over Ethernet (PoE) 2-1
Power over Ethernet (PoE) 2-1
R
rebooting, IP camera 4-4
Refresh link 4-1
reset
factory default values 4-4
reboot 4-4
S
saturation 4-8
SD memory card
deleting video files from 4-14
downloading video files from 4-14
formatting 4-13
sensitivity, for motion detection 4-10, 4-11
Setup window
description 4-2
displaying 4-2
sharpness 4-8
speaker
volume 4-7
storage
Cisco SD utility, downloading 4-13
decrypting video files 4-15
managing 4-12
SD memory card
deleting video files from 4-14
downloading video files from 4-14
formatting 4-13
T
threshold, for motion detection 4-10, 4-11
tilting 4-5
V
video
viewing live
through Home window 4-4
through third-party device or software 4-4
See also live video
video codec
controls in Camera Video/Control window 4-5
video resolution
controls in Camera Video/Control window 4-5
View Video link 4-2
W
warnings before installation 2-1
white balance mode 4-8
Z
zoom
accessing controls 4-11
zoom controls 4-11