Cisco Identity Services Engine Hardware Installation Guide, Release 1.1.x
Appendix F, Cisco SNS-3400 Series Server Specification
Downloads: This chapterpdf (PDF - 60.0KB) The complete bookPDF (PDF - 8.2MB) | Feedback

Table of Contents

Cisco SNS-3400 Series Server Specifications

Physical Specifications

Environmental Specifications

Power Specifications

450W Power Supply

650W Power Supply

Cisco SNS-3400 Series Server Specifications

This appendix lists the technical specifications for the server and includes the following sections:

Physical Specifications

Table A-1 lists the physical specifications for the server.

Table A-1 Physical Specifications

Description
Specification

Height

1.7 in. (4.3 cm)

Width

16.9 in. (42.9 cm)

Depth

28.5 in. (72.4 cm)

Weight (fully loaded chassis)

35.6 lb. (16.1 Kg)

Environmental Specifications

Table A-2 lists the environmental specifications for the server.

 

Table A-2 Environmental Specifications

Description
Specification

Temperature, operating:

41 to 104°F (5 to 40°C)
Derate the maximum temperature by 1°C per every 305 meters of altitude above sea level.

Temperature, non-operating

–40 to 149°F (–40 to 65°C)

Humidity (RH), noncondensing

10 to 90%

Altitude, operating

0 to 10,000 feet

Altitude, non-operating

0 to 40,000 feet

Sound power level
Measure A-weighted per ISO7779 LwAd (Bels)
Operation at 73°F (23°C)

5.4

Sound pressure level
Measure A-weighted per ISO7779 LpAm (dBA)
Operation at 73°F (23°C)

37

Power Specifications

The power specifications for the two power supply options are listed in the following sections:

You can get more specific power information for your exact server configuration by using the Cisco UCS Power Calculator:

http://www.cisco.com/assets/cdc_content_elements/flash/dataCenter/cisco_ucs_power_calculator/


Note Do not mix power supply types in the server. Both power supplies must be either 450W or 650W.


450W Power Supply

Table A-3 lists the specifications for each 450W power supply (Cisco part number UCSC-PSU-450W).

 

Table A-3 Power Supply Specifications

Description
Specification

AC input voltage range

Low range: 100 VAC to 120 VAC
High range: 200 VAC to 240 VAC

AC input frequency

Range: 47 to 63 Hz (single phase, 50 to 60Hz nominal)

AC line input current (steady state)

6.0 A peak at 100 VAC
3.0 A peak at 208 VAC

Maximum output power for each power supply

450 W

Power supply output voltage

Main power: 12 VDC

Standby power: 12 VDC

650W Power Supply

Table A-4 lists the specifications for each 650W power supply (Cisco part number UCSC-PSU-650W).

 

Table A-4 Power Supply Specifications

Description
Specification

AC input voltage range

90 to 264 VAC (self-ranging, 180 to 264 VAC nominal)

AC input frequency

Range: 47 to 63 Hz (single phase, 50 to 60Hz nominal)

AC line input current (steady state)

7.6 A peak at 100 VAC
3.65 A peak at 208 VAC

Maximum output power for each power supply

650 W

Power supply output voltage

Main power: 12 VDC

Standby power: 12 VDC