Preface
Published: April 22, 2009, OL-16974-01
Contents
This document describes how to install, configure, and use Intrusion Prevention System Manager Express (IME) 6.2. It includes a glossary that contains expanded acronyms and pertinent IPS terms. It is part of the documentation set for Cisco Intrusion Prevention System 6.2. Use this guide with the documents listed in Related Documentation. This preface contains the following topics:
•Audience
•Conventions
•Related Documentation
•Obtaining Documentation and Submitting a Service Request
Audience
This guide is for administrators who need to do the following:
•Install and configure IME.
•Secure their networks with IPS sensors.
•Prevent intrusion on their networks and monitor subsequent alerts.
Conventions
This document uses the following conventions:
|
|
Commands, keywords, special terminology, and options that should be selected during procedures |
boldface font |
Variables for which you supply values and new or important terminology |
italic font |
Displayed session and system information, paths and filenames |
screen font |
Information you enter |
boldface screen font |
Variables you enter |
italic screen font |
Menu items and button names |
boldface font |
Indicates menu items to select, in the order you select them. |
Option > Network Preferences |
Note Means reader take note. Notes identify important information that you should reflect upon before continuing, contain helpful suggestions, or provide references to materials not contained in the document.
Caution
Means
reader be careful. In this situation, you might do something that could result in equipment damage, loss of data, or a potential breach in your network security.
Tip Identifies information to help you get the most benefit from your product
|
Warning Identifies information that you must heed to prevent damaging yourself, the state of software, or equipment. Warnings identify definite security breaches that will result if the information presented is not followed carefully.
|
Related Documentation
For more information on Cisco IPS, refer to the following documentation found at this URL:
http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/tsd_products_support_series_home.html
•Documentation Roadmap for Cisco Intrusion Prevention System
•Release Notes for Cisco Intrusion Prevention System
•Cisco Intrusion Prevention System Device Manager Configuration Guide
•Cisco Intrusion Prevention System Command Reference
•Cisco Intrusion Prevention System Sensor CLI Configuration Guide
•Cisco Intrusion Prevention System Appliance and Module Installation Guide
•Installling and Removing Interface Cards in Cisco IPS-4260 and IPS 4270-20
•Regulatory Compliance and Safety Information for the Cisco Intrusion Detection and Prevention System 4200 Series Appliance Sensor
•Regulatory Compliance and Safety Information for the Cisco ASA 5500-X Series Appliances and the Cisco Intrusion Prevention System 4300 Series Appliances
•Regulatory Compliance and Safety Information for the Cisco Intrusion Prevention System 4500 Series Sensor Appliance
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.