The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Contents
( - A - B - C - D - E - F - H - I - J - L - M - O - P - R - S - T - U - V - X -Index
(
(table) 1 2A
about 1
action command
logging keyword 1
trigger keyword 1
Additional References command 1 2 3 4 5 6
ageout command
ICMP Echo operation 1
ICMP Path Echo operation 1
ICMP Path Jitter operation 1
UDP Echo operation 1
UDP Jitter operation 1
Alarm Logging and Debugging Event Management System
see ALDEMS 1
alarms
bi-state alarms 1
capacity threshold setting 1
severity level 1
severity level and filtering 1
ALDEMS 1
ALDEMS (Alarm Management and Debugging Event System), description 1
and IP SLA Control Protocol 1
applying 1 2 3
archiving 1
archiving messages 1 2
archiving system logging messages 1 2
averaged threshold violation 1B
benefits 1 2
benefits, IP SLA 1
bi-state alarms 1
binary file id 1
buckets command 1
buffer settings, modifying 1 2C
capacity threshold setting 1
clear logging correlator delete all-in-buffer command 1
clear logging correlator delete command 1
clear logging events delete event-hi-limit 1
clear logging events delete first event-count command 1
clear logging events delete group message-group command 1
clear logging events delete last event-count command 1
clear logging events delete timestamp-lo-limit 1
clear logging events reset all-in-buffer command 1
Clearing OBFL Messages: Example command 1
command defaults 1
commands used to control 1
Configuration Examples for Alarm Management and Logging Correlation command 1
Configuration Examples for Event Management Policies command 1
Configuration Examples for Implementing IP Service Level Agreements command 1
Configuration Examples for Implementing Logging Services command 1
Configuration Examples for Implementing Performance Management on Cisco IOS XR Software command 1
Configuration Examples for OBFL command 1
Configuration Examples for Writing Embedded Event Manager Policies Using Tcl command 1
configuring 1
logging buffer 1
logging history table 1
logging to a remote server 1
logging to the console 1
message destinations 1
Configuring a Logging Archive: Example command 1
Configuring a Nonstateful Correlation Rule to Permanently Suppress Node Status Messages: Example command 1
Configuring a Stateful Correlation Rule for LINK UPDOWN and SONET ALARM Alarms: Example command 1
Configuring IP Service Level Agreements: Example command 1
Configuring IP SLA MPLS LSP Monitoring: Example command 1
Configuring IP SLA Reactions and Threshold Monitoring: Example command 1
configuring logging to the console 1
Configuring Logging to the Console Terminal and the Logging Buffer: Example command 1
Configuring LSP Path Discovery: Example command 1
Configuring Message Severity Levels: Example command 1
configuring the logging buffer 1
configuring the logging history table 1
Configuring the Settings for the Logging History Table: Example command 1
connection-loss keyword 1
consecutive threshold violation 1
control protocol 1
control protocol, IP SLA 1
correlated message 1
creating 1 2 3 4 5
Creating and Enabling PM Statistics Collection Templates: Example command 1
Creating and Enabling PM Threshold Monitoring Templates: Example command 1
current terminal session, enabling logging for 1D
datasize request command
ICMP Echo operation 1
ICMP Path Echo operation 1
ICMP Path Jitter operation 1
UDP Echo operation 1
UDP Jitter operation 1
definitions 1
description 1 2
destination address command
ICMP Echo operation 1
ICMP Path Echo operation 1
ICMP Path Jitter operation 1
UDP Echo operation 1
UDP Jitter operation 1
destination port command
UDP Echo operation 1
UDP Jitter operation 1
destinations 1
disabling 1 2 3 4
disabling the logging of link-status messages 1
Display Available Policies: Example command 1
Display Embedded Event Manager Process: Example command 1
Displaying OBFL Data: Example command 1
displaying system logging messages 1
distribution count command 1
distribution interval command 1E
EEM Event Detector Demo: Example command 1
enabling 1 2 3 4 5 6
Enabling Alarm Source Location Display Field for Bistate Alarms: Example command 1
Enabling and Disabling OBFL: Example command 1
enabling logging for the current terminal session 1
Environmental Variables Configuration: Example command 1
error messages
levels 1
logging keywords
(table) 1
logging keywords (table) 1
event manager environment command 1
event manager policy command 1
example 1F
facility types
(table) 1
fault manager policies
persist-time 1
registering 1
fault manager policy command 1
format 1
frequency (IP SLA) command
ICMP Echo operation 1
ICMP Path Echo operation 1
ICMP Path Jitter operation 1
UDP Echo operation 1
UDP Jitter operation 1
functional overview 1H
hostname prefix logging 1I
ICMP Echo operation 1 2
ICMP Path Echo operation 1 2
ICMP Path Jitter operation 1 2
ICMP Path Jitter operation parameters, list of 1
immediate threshold violation 1
improvements, list of 1
Increasing the Severity Level for Alarm Filtering to Display Fewer Events and Modifying the Alarm Buffer Size and Capacity Threshold: Example command 1
insertion and removal
see OIR 1
introduction 1
IP SLA
benefits 1
control protocol 1
improvements, list of 1
introduction 1
operation, types of 1
performance measurement 1
reaction 1
reaction, how to 1
responder
about 1
enabling 1
response time 1
schedule 1
technology 1
threshold monitoring 1
vrf 1
ipsla operation command
ICMP Echo operation 1
ICMP Path Echo operation 1
ICMP Path Jitter operation 1
UDP Echo operation 1
UDP Jitter operation 1
ipsla reaction operation command 1
ipsla reaction trigger command 1
ipsla responder command 1
description 1
example 1
ipsla schedule operation command
ICMP Echo operation 1
ICMP Path Echo operation 1
ICMP Path Jitter operation 1
UDP Echo operation 1
UDP Jitter operation 1J
jitter-average keyword 1L
levels 1
life command
ICMP Echo operation 1
ICMP Path Echo operation 1
ICMP Path Jitter operation 1
UDP Echo operation 1
UDP Jitter operation 1
logging buffer 1
logging correlation 1
correlation rules, configuring 1
logging correlation rules 1
applying 1 2 3
configuring 1
logging correlator apply rule command 1
logging correlator apply-rule command 1
logging correlator buffer
buffer settings, modifying 1
logging correlator buffer-size command 1
logging correlator rule command 1 2
logging events buffer 1 2
buffer settings, modifying 1
logging events buffer-size command 1
logging events level command 1
logging events threshold command 1
logging history table 1 2
logging keyword 1
logging keywords
(table) 1
logging keywords (table) 1
logging process 1
logging to a remote server 1
logging to the console 1
LSP Path Discovery (LPD) 1
lsr-path command 1M
message destinations 1
message logging
facility types
(table) 1
syslog server 1
syslog server<$startrange> 1
messages
archiving 1
destinations 1
format 1
sending to destinations other than the console 1
modifying time stamps 1 2
Modifying Time Stamps: Example command 1
modular service card
see MSC 1
MPLS LSP monitor (MPLSLM) 1
MSC 1O
OIR 1
operation, IP SLA types 1
operation, types of 1
overview 1P
packet count command
ICMP Path Jitter operation 1
UDP Jitter operation 1
packet interval command
ICMP Path Jitter operation 1
UDP Jitter operation 1
packet-loss keyword 1
path discover command 1
Performance Management (PM)
benefits 1
functional overview 1
PM entity instance monitoring
enabling 1
overview 1
PM statistics collection, overview 1
PM statistics collection templates
creating 1 2
description 1
disabling 1 2
enabling 1 2
TFTP server, configuring 1
PM Statistics Collector, description 1
PM Statistics Server, description 1
PM threshold monitoring, overview 1
PM threshold monitoring templates
creating 1 2 3
disabling 1 2
enabling 1 2
performance measurement 1
performance measurement, IP SLA 1
persist-time 1
PM entity instance monitoring
enabling 1
overview 1
PM statistics collection templates
creating 1 2
description 1
disabling 1 2
enabling 1 2
TFTP server, configuring 1
PM statistics collection, overview 1
PM Statistics Collector, description 1
PM Statistics Server, description 1
PM threshold monitoring templates
creating 1 2 3
disabling 1 2
enabling 1 2
PM threshold monitoring, overview 1
Programming Policies with Tcl: Sample Scripts Example command 1R
react command
connection-loss keyword 1
jitter-average keyword 1
packet-loss keyword 1
rtt keyword 1
timeout keyword 1
verify-error keyword 1
reaction 1
reaction, how to 1
Reaction, IP SLA 1
reaction, IP SLA how to 1
recurring command
ICMP Echo operation 1
ICMP Path Echo operation 1
ICMP Path Jitter operation 1
UDP Echo operation 1
UDP Jitter operation 1
registering 1
responder
about 1
enabling 1
responder, IP SLA
about 1
and IP SLA Control Protocol 1
enabling 1
ipsla responder command 1
type udp ipv4 address command 1
response time 1
response time, IP SLA 1
root message 1
rtt keyword 1S
schedule 1
schedule operation, IP SLA 1
see ALDEMS 1
see MSC 1
see OIR 1
see SNMP 1
sending syslog messages to destinations other than the console 1
sending to destinations other than the console 1
Setting Up Destinations for Syslog Messages: Example command 1
severity level 1
severity level and filtering 1
severity level command defaults 1
severity level definitions 1
severity levels 1
command defaults 1
commands used to control 1
definitions 1
show event manager environment command 1
show event manager policy available 1
show event manager policy registered command 1
show fault manager metric process command
example 1
show fault manager metric process command (example) 1
show fault manager policy available command
example 1
show fault manager policy available command (example) 1
show ipsla statistics aggregated command 1
show ipsla statistics command
ICMP Echo operation 1
ICMP Path Echo operation 1
ICMP Path Jitter operation 1
UDP Echo operation 1
UDP Jitter operation 1
show logging correlator buffer all-in-buffer command 1 2
show logging correlator buffer correlationID command 1
show logging correlator buffer rule-name correlation-rule command 1
show logging correlator info command 1 2
show logging correlator ruleset command 1
show logging events buffer all-in-buffer command 1
show logging events buffer first command 1
show logging events buffer group command 1
show logging events buffer last command 1
show logging events buffer location command 1
show logging events buffer message command 1
show logging events buffer severity-hi-limit command 1
show logging events buffer severity-lo-limit command 1
show logging events buffer timestamp-hi-limit command 1
show logging events buffer timestamp-lo-limit command 1
show logging events info command 1
Simple Network Management Protocol
see SNMP 1
SNMP 1
snmp alarm correlation 1
source address logging 1
start-time command
ICMP Echo operation 1
ICMP Path Echo operation 1
ICMP Path Jitter operation 1
UDP Echo operation 1
UDP Jitter operation 1
statistics command 1
suppressing duplicate syslog messages 1
syslog
archiving system logging messages 1
configuring
logging buffer 1
logging history table 1
logging to a remote server 1
logging to the console 1
message destinations 1
current terminal session, enabling logging for 1
disabling the logging of link-status messages 1
displaying system logging messages 1
hostname prefix logging 1
logging history table 1
messages
archiving 1
destinations 1
format 1
sending to destinations other than the console 1
modifying time stamps 1 2
severity levels
command defaults 1
commands used to control 1
definitions 1
source address logging 1
suppressing duplicate syslog messages 1
system logging process 1
UNIX syslog daemon configuration 1
UNIX system logging facilities 1
Syslog
archiving system logging messages 1 2
configuring logging to the console 1
configuring the logging buffer 1
configuring the logging history table 1
disabling the logging of link-status messages 1
displaying system logging messages 1
enabling logging for the current terminal session 1
hostname prefix logging 1
logging history table 1
modifying time stamps 1 2
sending syslog messages to destinations other than the console 1
severity level command defaults 1
severity level definitions 1
severity levels 1
suppressing duplicate syslog messages 1
syslog message destinations 1
syslog source address logging 1
system logging messages 1
system logging process 1
UNIX syslog daemon configuration 1
syslog message destinations 1
syslog server 1
syslog server<$startrange> 1
syslog source address logging 1
system 1
system logging messages 1
system logging process 1T
tag command
ICMP Echo operation 1
ICMP Path Echo operation 1
ICMP Path Jitter operation 1
UDP Echo operation 1
technology 1
technology, IP SLA 1
TFTP server, configuring 1
threshold monitoring 1
threshold monitoring, IP SLA 1
threshold type average command 1
threshold type consecutive command 1
threshold type immediate command 1
threshold type xofy command 1
threshold violation types, IP SLA reaction 1
timeout command
ICMP Echo operation 1
ICMP Path Echo operation 1
ICMP Path Jitter operation 1
UDP Echo operation 1
UDP Jitter operation 1
timeout keyword 1
tos command
ICMP Echo operation 1
ICMP Path Echo operation 1
ICMP Path Jitter operation 1
UDP Echo operation 1
UDP Jitter operation 1
Tracing Tcl set Command Operations: Example command 1
trigger keyword 1
type icmp echo command 1
type icmp path-echo command 1
type icmp path-jitter command 1
type udp echo command 1
type udp ipv4 address command 1
type udp jitter command 1U
UDP Echo operation 1 2
UDP Jitter operation 1 2
UDP Jitter operation parameters, list of 1
UNIX syslog daemon configuration 1
UNIX system logging facilities 1
User-Defined Embedded Event Manager Policy Registration: Example command 1V
verify-error keyword 1
vrf 1
vrf, IP SLA 1X
X of Y threshold violation 1