To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
The pvc command creates a PVC and attaches it to the specified DLCI.
The Cisco IOS XR software dynamically creates rate queues as necessary to satisfy the requests of the PVC commands.
When you issue the pvc command in global configuration mode, the CLI prompt changes to “config-fr-vc,” indicating that you have entered the Frame Relay virtual circuit configuration submode.
In the following sample output, the question mark (?) online help function displays all the commands available under the Frame Relay virtual circuit configuration submode for the serial subinterface:
RP/0/0/CPU0:router(config)# interface serial 0/3/2/0.1
RP/0/0/CPU0:router(config-subif)# pvc 20
commit Commit the configuration changes to running
describe Describe a command without taking real actions
do Run an exec command
exit Exit from this submode
no Negate a command or set its defaults
show Show contents of configuration