The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
To use these commands in System Admin VM, you must be in a user group associated with appropriate command rules and data rules. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
To configure global default CLI session parameters, use the session command in the System Admin Config mode.
session { autowizard [ false | true ] | complete-on-space [ false | true ] | display-level [display-value] | history size | idle-timeout [timeout-value] | ignore-leading-space [ false | true ] | paginate [ false | true ] | prompt1 [string] | prompt2 [string] | show-defaults [ false | true ] }
false |
Negates the parameter option. The same parameter will be available for setting it later. |
true |
Sets the parameter option effective. The parameter will be set. |
autowizard |
Automatically queries user for mandatory elements. |
complete-on-space |
Enables or disables completion on space. |
display-level [display-value] |
Specifies maximum depth to show when displaying configuration. The value must be an unsigned long integer and the range is 1 to 64. |
history [size] |
Specifies the history size. The value must be an unsigned long integer and the range is 0 to 8192. |
idle-timeout [timeout-value] |
Specifies the CLI idle-timeout in seconds. The value must be an unsigned long integer and the range is 0 to 8192. |
ignore-leading-space |
Ignores leading whitespace. |
paginate |
Paginates output from CLI commands |
prompt1 [string] |
Prompt for operational mode. |
prompt2 [string] |
Prompt for configure mode. |
show-defaults |
Displays default values when showing the configuration. |
None
System Admin Config
Release | Modification |
---|---|
Release 5.0.0 |
This command was introduced. |
sysadmin-vm:0_RP0#config sysadmin-vm:0_RP0(config)#session autowizard true
To create command alias, use the user alias command in the System Admin Config mode. To delete the user alias, use the no form of this command.
user user-name alias alias-name [ expansion command-syntax ]
no user user-name alias alias-name [ expansion command-syntax ]
user-name |
Name of the user. The user-name argument can be only one word. Spaces and quotation marks are not allowed. |
alias alias-name |
Name of the command alias. The alias-name argument can be only one word. Spaces and quotation marks are not allowed. |
expansion command-syntax |
Specifies the original command syntax. The command-syntax must be specified within double quotes. |
None
System Admin Config
Release | Modification |
---|---|
Release 5.0.0 |
This command was introduced. |
sysadmin-vm:0_RP0#config sysadmin-vm:0_RP0(config)#user sess sysadmin-vm:0_RP0(config-user-sess)#alias sessiongroup sysadmin-vm:0_RP0(config-alias-sessiongroup)#
To create user description, use the user description command in the System Admin Config mode. To delete the user description, use the no form of this command.
user user-name description string [ alias alias-name [ expansion command-syntax ] ]
no user-name user-name description string [ alias alias-name [ expansion command-syntax ] ]
user-name |
Name of the user. The user-name argument can be only one word. Spaces and quotation marks are not allowed. |
description string |
Creates user description. |
alias alias-name |
Name of the command alias. The alias-name argument can be only one word. Spaces and quotation marks are not allowed. |
expansion command-syntax |
Specifies the original command syntax. The command-syntax must be specified within double quotes. |
None
System Admin Config
Release | Modification |
---|---|
Release 5.0.0 |
This command was introduced. |
sysadmin-vm:0_RP0#config sysadmin-vm:0_RP0(config)#user sess sysadmin-vm:0_RP0(config-user-sess)# description sessioncommandsuser
To configure user specific default CLI session parameters, use the user session command in the System Admin Config mode. To remove the configured user specific session parameters, use the no form of this command.
user user-name session { autowizard [ false | true ] | complete-on-space [ false | true ] | display-level [display-value] | history size | idle-timeout [timeout-value] | ignore-leading-space [ false | true ] | paginate [ false | true ] | prompt1 [string] | prompt2 [string] | show-defaults [ false | true ] }
no user user-name session
user-name |
Name of the user. The user-name argument can be only one word. Spaces and quotation marks are not allowed. |
false |
Negates the parameter option. The same parameter will be available for setting it later. |
true |
Sets the parameter option effective. The parameter will be set. |
autowizard |
Automatically queries user for mandatory elements. |
complete-on-space |
Enables or disables completion on space. |
display-level [display-value] |
Specifies maximum depth to show when displaying configuration. The value must be an unsigned long integer and the range is 1 to 64. |
history [size] |
Specifies the history size. The value must be an unsigned long integer and the range is 0 to 8192. |
idle-timeout [timeout-value] |
Specifies the CLI idle-timeout in seconds. The value must be an unsigned long integer and the range is 0 to 8192. |
ignore-leading-space |
Ignores leading whitespace. |
paginate |
Paginates output from CLI commands |
prompt1 [string] |
Prompt for operational mode. |
prompt2 [string] |
Prompt for configure mode. |
show-defaults |
Displays default values when showing the configuration. |
If no user specific session parameters are defined, then the values defined for the global CLI session parameters are applicable.
System Admin Config
Release | Modification |
---|---|
Release 5.0.0 |
This command was introduced. |
sysadmin-vm:0_RP0#config sysadmin-vm:0_RP0(config)#user sess session autowizard true