The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
To use these commands in System Admin VM, you must be in a user group associated with appropriate command rules and data rules. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
To display alarms related to System Admin in brief or detail, use the show alarms command in the System Admin EXEC mode.
show alarms [ brief [ card | rack | system ] [ location node-id ] [ active | history ] | detail [ card | rack | system ] [ location node-id ] [ active | clients | history | stats ] ]
brief |
Displays alarms in brief. |
card |
Displays card scope alarms related data. |
rack |
Displays rack scope alarms related data. |
system |
Displays system scope alarms related data. |
location node-id |
Specifies the target location. The node-id argument is expressed in the rack/slot notation. |
active |
Displays active alarms. |
history |
Displays alarm history. |
detail |
Displays alarms in detail. |
clients |
Displays clients associated with the service. |
stats |
Displays service statistics. |
None
System Admin EXEC
Release | Modification |
---|---|
Release 5.0.0 |
This command was introduced. |
sysadmin-vm:0_RP0#show alarms brief card location 0/1
Tue Aug 20 00:35:30.442 UTC
-----------------------------------------------------------------------
History Alarms
-----------------------------------------------------------------------
Location Severity Group Set time Description
Clear time
-----------------------------------------------------------------------
0/1 critical environ 08/19/13 21:35:29 Vctrl1-VP1P2: ENVMON detects high voltage alarm from a sensor
08/19/13 21:35:29
0/1 minor environ 08/19/13 21:35:29 MB Inlet: ENVMON detects an I2C access error
08/19/13 21:35:29
0/1 major environ 08/19/13 21:35:29 multiple sensors: ENVMON detects a sensor fault
08/19/13 21:35:29
0/1 minor environ 08/19/13 21:35:29 PCIe Die: ENVMON detects an I2C access error
08/19/13 21:35:29
To display debug trace information, use the show alarms trace command in the System Admin EXEC mode.
show alarms trace { all | trace-name } location node-id [ all | trace-attribute ]
all |
Displays trace information for all the trace buffers in the system. |
trace-name |
Displays trace information for a specific trace buffer name. |
location node-id |
Specifies the target location. The node-id argument is expressed in the rack/slot notation. |
trace-attribute |
Specifies the trace attribute. |
None
System Admin EXEC
Release | Modification |
---|---|
Release 5.0.0 |
This command was introduced. |
This command displays the alarm traces per card and is used for diagnostics only.
sysadmin-vm:0_RP0#show alarms trace info location 0/RP0 all
Fri Sep 13 08:01:03.901 UTC
02.58.38.585741952:alarm_mgr: starting CAPI NM service initialization.
02.58.38.585762688:alarm_mgr: CAPI client (base) service initialization.
02.58.38.621692800:alarm_mgr: pm connect request completed normally.
02.58.38.690578432:alarm_mgr: starting CAPI client service <calv_alarm_nm> activation.
02.58.38.746492160:alarm_mgr: alarm service <calv_alarm_nm> activated.
02.58.39.459840512:calv_alarm_ds: connected to DS service.
02.58.41.340024832:alarm_mgr: connected to platform local service.
02.58.41.420551040:alarm_mgr: IP addres registration succeded.
02.58.41.420573568:alarm_mgr: pl nodeid registration succeded.
02.58.52.128728192:alarm_mgr: node IP address: 0xc0000001
02.58.52.128778240:alarm_mgr: starting CAPI client service <calv_alarm_nm> activation.
02.58.52.129173632:alarm_mgr: alarm service <calv_alarm_nm> activated.
02.58.52.341911808:alarm_mgr: service<calv_alarm_nm> client connection detected,hndl: 0x23bf380 me: 0x23290e0
02.58.52.341925760:alarm_mgr: new client detected service <calv_alarm_nm>, hndl: 0x23bf380
02.58.52.361801344:alarm_mgr: service<calv_alarm_nm> client connection detected, hndl: 0x23d16a0 me: 0x23290e0
02.58.52.361802752:alarm_mgr: new client detected service <calv_alarm_nm>, hndl:0x23d16a0
02.58.52.382194688:alarm_mgr: service <calv_alarm_nm> client registering
--More--