Guest

Cisco Network Convergence System 6000 Series Routers

New and Changed Commands Reference for Cisco NCS 6000 Series Routers

  • Viewing Options

  • PDF (1.0 MB)
  • Feedback
New and Changed Commands

New and Changed Commands

This list summarizes the commands which were newly added and changed in Cisco IOS XR Software, for Cisco NCS 6000 Series Routers, and gives you the location where the commands are documented.

To read additional information about Cisco IOS XR Software features, see the Release Notes:

Release Notes

The latest versions of Cisco IOS XR Software documents are available at:

Cisco IOS XR Software Documents

Configuration Guides

Command References

Commands Newly Added and Changed for Cisco NCS 6000 Series Routers

Command History

Command Change Description
Release 5.2.3
admin-state

This command was introduced.

controller dwdm

This command was introduced.

g709 bdi-to-client-gais

This command was introduced.

g709 disable

This command was introduced.

g709 fec

This command was introduced.

g709 otu threshold

This command was introduced.

g709 tim-to-client-gais

This command was introduced.

g709 tti-processing

This command was introduced.

log signal

This command was introduced.

loopback (DWDM)

This command was introduced.

maintenance disable

This command was introduced.

network connection id

This command was introduced.

network port id

This command was introduced.

network srlg

This command was introduced.

rx-los-threshold

This command was introduced.

show controller dwdm

This command was introduced.

transmit-power

This command was introduced.

wavelength

This command was introduced.

nsr disable (BGP)

This command was introduced.

show controller ccc ethernet

New trace names were added.

show controller ccc event-history

This command was introduced.

show controller ccc inventory

The command output for the summary keyword was enhanced to display the card state information.

show controller ccc notif-history

This command was introduced.

show controller ccc oir-history

This command was introduced.

show controller ccc trace

New trace names were added.

hw-module location

A reload of the hardware after the slice is shutdown using the reload keyword is not required as the slice is dynamically reset.

show platform

The output for the detail keyword captures card failure events and the reason for failure when show platform command is run in System Admin EXEC mode.

install extract

This command was introduced.

install prepare issu

This command was introduced.

install activate issu

This command was introduced.

install activate issu load

This command was introduced.

install activate issu run

This command was introduced.

install deactivate issu

This command was introduced.

install activate issu cleanup

This command was introduced.

install activate issu abort

This command was introduced.

show issu summary

This command was introduced.

users

This command was introduced.

action (IP SLA)

This command was introduced.

ageout

This command was introduced.

buckets (statistics hourly)

This command was introduced.

buckets (statistics interval)

This command was introduced.

control disable

This command was introduced.

datasize request

This command was introduced.

destination address (IP SLA)

This command was introduced.

destination port

This command was introduced.

distribution count

This command was introduced.

distribution interval

This command was introduced.

frequency (IP SLA)

This command was introduced.

ipsla

This command was introduced.

key-chain

This command was introduced.

life

This command was introduced.

low-memory

This command was introduced.

operation

This command was introduced.

packet count

This command was introduced.

packet interval

This command was introduced.

react

This command was introduced.

reaction operation

This command was introduced.

reaction trigger

This command was introduced.

responder

This command was introduced.

recurring

This command was introduced.

schedule operation

This command was introduced.

show ipsla application

This command was introduced.

show ipsla history

This command was introduced.

show ipsla responder statistics

This command was introduced.

show ipsla statistics

This command was introduced.

show ipsla statistics aggregated

This command was introduced.

show ipsla statistics enhanced aggregated

This command was introduced.

source address

This command was introduced.

source port

This command was introduced.

start-time

This command was introduced.

statistics

This command was introduced.

tag (IP SLA)

This command was introduced.

threshold

This command was introduced.

threshold type average

This command was introduced.

threshold type consecutive

This command was introduced.

threshold type immediate

This command was introduced.

threshold type xofy

This command was introduced.

timeout (IP SLA)

This command was introduced.

tos

This command was introduced.

type udp jitter

This command was introduced.

type udp ipv4 address

This command was introduced.

verify-data

This command was introduced.

vrf (IP SLA)

This command was introduced.

show aaa accounting

This command was introduced.

show aaa user-group

This command was introduced.

show tech-support aaa

This command was introduced.

Release 5.2.1
clear lldp

This command was introduced.

lldp

This command was introduced.

lldp (interface)

This command was introduced.

lldp holdtime

This command was introduced.

lldp reinit

This command was introduced.

lldp timer

This command was introduced.

lldp tlv-select disable

This command was introduced.

show lldp

This command was introduced.

show lldp entry

This command was introduced.

show lldp errors

This command was introduced.

show lldp interface

This command was introduced.

show lldp neighbors

This command was introduced.

show lldp traffic

This command was introduced.

permit (IPv4)

The default nexthop and nexthop keywords were added to support ACL-based forwarding.

permit (IPv6)

The default nexthop and nexthop keywords were added to support ACL-based forwarding.

show access-lists ipv4

The show command was updated to display ACL-based forwarding information.

clear mpls oam counters

This command was introduced.

echo disable-vendor-extension

This command was introduced.

echo revision

This command was introduced.

mpls oam

This command was introduced.

ping mpls ipv4

This command was introduced.

ping pseudowire (AToM)

This command was introduced.

ping mpls traffic-eng tunnel-te (P2P)

This command was introduced.

ping mpls traffic-eng tunnel-mte (P2MP)

This command was introduced.

ping mpls mldp (P2MP)

This command was introduced.

ping mpls mldp (MP2MP)

This command was introduced.

show mpls oam

This command was introduced.

show mpls oam database

This command was introduced.

traceroute mpls ipv4

This command was introduced.

traceroute mpls multipath

This command was introduced.

traceroute mpls traffic-eng tunnel-te (P2P)

This command was introduced.

traceroute mpls traffic-eng tunnel-mte (P2MP)

This command was introduced.

traceroute mpls mldp (P2MP)

This command was introduced.

traceroute mpls mldp (MP2MP)

This command was introduced.

accounting per-prefix

IPv6 support was added on this command.

clear mfib counter

IPv6 support was added on this command.

clear mfib database

IPv6 support was added on this command.

show mfib connections

IPv6 support was added on this command.

show mfib counter

IPv6 support was added on this command.

show mfib hardware route accept-bitmap

IPv6 support was added on this command.

show mfib hardware route olist

IPv6 support was added on this command.

show mrib client

IPv6 support was added on this command.

show mrib nsf

IPv6 support was added on this command.

show mrib route

IPv6 support was added on this command.

show mrib route-collapse

IPv6 support was added on this command.

show mrib table-info

IPv6 support was added on this command.

clear pim counters

IPv6 support was added on this command.

clear pim topology

IPv6 support was added on this command.

router pim

IPv6 support was added on this command.

rpf-redirect

This command was introduced.

rpf-redirect bundle

This command was introduced.

show pim group-map

IPv6 support was added on this command.

show pim interface

IPv6 support was added on this command.

show pim join-prune statistic

IPv6 support was added on this command.

show pim rpf-redirect

This command was introduced.

show pim rpf-redirect route

This command was introduced.

show pim mstatic

IPv6 support was added on this command.

show pim nsf

IPv6 support was added on this command.

show pim range-list

IPv6 support was added on this command.

show pim traffic

IPv6 support was added on this command.

show pim tunnel info

IPv6 support was added on this command.

maximum-prefix (BGP)

This command was introduced.

nsr (BGP)

This command was introduced.

show bgp neighbors nsr

This command was introduced.

show bgp nsr

This command was introduced.

show bgp summary nsr

This command was introduced.

ucmp (OSPFv2)

This command was introduced.

ucmp delay-interval (OSPFv2)

This command was introduced.

ucmp exclude interface (OSPFv2)

This command was introduced.

protocol shutdown (OSPFv3)

This command was introduced.

show ospfv3

The output of the command was modified to include OSPFv3 graceful shutdown status.

lcd alarm-category

This command was introduced.

lcd message

This command was introduced.

lcd name

This command was introduced.

show diag lcd-interface

This command was introduced.

lawful-intercept disable

This command was introduced.

Release 5.0.1

show mac-accounting (Ethernet)

This command was introduced.

clear controller wanphy

This command was introduced.

controller wanphy

This command was introduced.

report sd-ber

This command was introduced.

report sf-ber disable

This command was introduced.

signal sf-ber remote-fault

This command was introduced.

show controllers wanphy

This command was introduced.

threshold sd-ber

This command was introduced.

threshold sf-ber

This command was introduced.

table-policy

This command was introduced.

bfd address-family ipv4 timers

This command was introduced.

install add

Support of ftp and sftp protocols was introduced.

install prepare

Support for ISO images was introduced.

install verify packages

This command was introduced.