Guest

Cisco Carrier Routing System

Cisco Carrier Routing System Hardware Documentation Revision Roadmap

  • Viewing Options

  • PDF (714.3 KB)
  • Feedback
Cisco Carrier Routing System Hardware Documentation Revision Roadmap

Table Of Contents

Cisco Carrier Routing System Hardware Documentation Revision Roadmap

Cisco CRS 4-Slot Line Card Chassis

Installation Guide

Site Planning Guide

System Description

Unpacking, Moving, and Securing Guide

Cisco CRS 8-Slot Line Card Chassis

Installation Guide

Site Planning Guide

System Description

Unpacking, Moving, and Securing Guide

Cisco CRS 8-Slot Line Card Chassis Enhanced Router

Installation Guide

Site Planning Guide

System Description

Unpacking, Moving, and Securing Guide

Cisco CRS 16-Slot Line Card Chassis

Installation Guide

Site Planning Guide

System Description

Unpacking, Moving, and Securing Guide

Cisco CRS 16-Slot Line Card Chassis Enhanced Router

Installation Guide

Site Planning Guide

System Description

Unpacking, Moving, and Securing Guide

Cisco CRS PLIMs

Cisco CRS Carrier Routing System Ethernet Physical Layer Interface Module Installation Note

Cisco CRS Carrier Routing System Packet-over-SONET/SDH Physical Layer Interface Module Installation Note

Cisco CRS 20 Gbps Carrier Grade Services Engine Physical Layer Interface Module Installation Note

Cisco CRS SIP and SPA Hardware Installation Guide

Regulatory Compliance and Safety Information

RSCI for the Cisco CRS Carrier Routing System

RSCI for the Cisco CRS Power Distribution Unit

Cisco CRS Fabric Card Chassis

Unpacking, Moving, and Securing Guide

Installation Guide

Integrated Switch Controller Card Installation Tasks

Cisco CRS FRUs

Cisco CRS 3-Phase AC Power Distribution Unit Installation Guide

Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide

CRS-PRP Routing Processor Migration

Flash Disk Upgrade Tasks

CRS DRR DIMM Memory Upgrade

Cisco CRS Multishelf System

Interconnection and Cabling Guide

Site Planning Guide

System Description

Installation Guide

Cisco CRS-3 Multishelf System

16-Slot Back-to-Back Cabling and Upgrade Guide

8-Slot Back-to-Back Cabling and Upgrade Guide

Obtaining Documentation and Submitting a Service Request


Cisco Carrier Routing System Hardware Documentation Revision Roadmap


Last Update: September 3, 2013

This document provides the latest revision information for the documents available on the Cisco Carrier Routing System Install and Upgrade Guides product support page, located at:

http://www.cisco.com/en/US/products/ps5763/prod_installation_guides_list.html

See the following links for details of the Cisco Carrier Routing System Install and Upgrade Guides, listed by product and title:

Cisco CRS 4-Slot Line Card Chassis

Cisco CRS 8-Slot Line Card Chassis

Cisco CRS 8-Slot Line Card Chassis Enhanced Router

Cisco CRS 16-Slot Line Card Chassis

Cisco CRS 16-Slot Line Card Chassis Enhanced Router

Cisco CRS PLIMs

Cisco CRS SIP and SPA Hardware Installation Guide

Regulatory Compliance and Safety Information

Cisco CRS Fabric Card Chassis

Cisco CRS FRUs

Cisco CRS Multishelf System

Cisco CRS-3 Multishelf System

Cisco CRS 4-Slot Line Card Chassis

The following sections provide a description, current revision number and publication date, and a summary of changes for each of the Cisco CRS 4-Slot documents:

Installation Guide

Site Planning Guide

System Description

Unpacking, Moving, and Securing Guide

Installation Guide

Describes the installation and removal of the hardware components that make up the system and includes details on the installation and removal of all field-replaceable unit hardware, including the power modules, fan trays, system cards, and other components.

Table 1 lists details of the most current release of the Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide.

Table 1 Cisco CRS 4-Slot Line Card Chassis Installation Guide

Current Revision
Publish Date
Change Summary

OL-10971-10

July 2011

Added information about new CRS-LSP Label Switch Processor (LSP) card to the following chapters:

Chapter 1 "Overview"

Chapter 4 "Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components"


Site Planning Guide

Describes the planning steps that one must take before unpacking, moving, and securing the chassis or system. Also includes details on the space, power, and cooling requirements that need to be planned for before installing the chassis or system.

Table 2 lists details of the most current release of the Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Site Planning Guide.

Table 2 Cisco CRS 4-Slot Line Card Chassis Site Planning Guide

Current Revision
Publish Date
Change Summary

OL-10804-06

August 2011

Minor editorial change to Figure 1-1 to correct a caveat.


System Description

Describes the Cisco CRS 4-Slot Line Card Chassis from a system point of view. Also focuses on hardware elements, including descriptions of most of the major assemblies, such as the power and cooling systems, the switch fabric, route processor, and modular services cards. Provides background information and the basic theory of operation for this routing system.

The guide can be read as a supplement to the Site Planning Guide, Installation Guide, and the related software documents.

Table 3 lists details of the most current release of the Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Enhanced Router System Description.

Table 3 Cisco CRS 4-Slot Line Card Chassis System Description

Current Revision
Publish Date
Change Summary

OL-10805-10

April 2012

Added "Alarm Port" section with pin outs to Chapter 6 to fix caveat.


Unpacking, Moving, and Securing Guide

Describes how to unpack the chassis and prepare it for placement at the installation site. Also describes how to move the chassis from the loading dock to the installation site and how to mount it in a rack.

Table 4 lists details of the most current release of the Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Site Planning Guide.

Table 4 Cisco CRS 4-Slot Line Card Chassis Unpacking, Moving, and Securing Guide

Current Revision
Publish Date
Change Summary

78-17820-06

April 2011

Added information about new performance route processor (PRP) cards (Cisco product IDs: CRS-8-PRP-6G, CRS-8-PRP-12G). Minor editorial changes were also made.


Cisco CRS 8-Slot Line Card Chassis

The following sections provide document descriptions, current revision number and publication date, and a summary of changes for the Cisco CRS 8-Slot Line Card Chassis documentation:

Installation Guide

Site Planning Guide

System Description

Unpacking, Moving, and Securing Guide

Installation Guide

Describes the installation and removal of the hardware components that make up the system and includes details on the installation and removal of all field-replaceable unit hardware, including the power modules, fan trays, system cards, and other components.

Table 5 lists details of the most current release of the Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Installation Guide.

Table 5 Cisco CRS 8-Slot Line Card Chassis Installation Guide

Current Revision
Publish Date
Change Summary

OL-6256-16

June 2013

Added information about how to replace a SFP on a line card that uses an articulated bracket.


Site Planning Guide

Describes the planning steps that need to be taken before unpacking, moving, and securing the chassis or system and includes details on the space, power, and cooling requirements that should be planned for prior to installing the chassis or system.

Table 6 lists details of the most current release of the Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Site Planning Guide.

Table 6 Cisco CRS 8-Slot Line Card Chassis Site Planning Guide

Current Revision
Publish Date
Change Summary

OL-5802-09

April 2011

Added information about new CRS-8-PRP-6G and CRS-8-PRP-12G Performance Route Processor (PRP) cards. Technical updates and minor editorial changes were also made.


System Description

Describes the Cisco CRS 8-Slot Line Card Chassis from a system point of view. The guide focuses on the hardware elements, including descriptions of most of the major assemblies, such as the power and cooling systems, the switch fabric, route processor, and modular services cards. It also provides background information and the basic theory of operation for this routing system.

The guide can be read as a supplement to the Site Planning Guide, Installation Guide, and the related software documents.

Table 7 lists details of the most current release of the Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Enhanced Router System Description.

Table 7 Cisco CRS 8-Slot Line Card Chassis System Description

Current Revision
Publish Date
Change Summary

OL-6345-15

April 2012

Added "Alarm Port" section with pin outs to Chapter 6 to fix caveat.


Unpacking, Moving, and Securing Guide

Describes how to unpack the chassis and prepare it for placement at the installation site, as well as how to move the chassis from the loading dock to the installation site and how to mount it in a rack.

Table 8 lists details of the most current release of the Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Unpacking, Moving, and Securing Guide.

Table 8 Cisco CRS 8-Slot Line Card Chassis Unpacking, Moving, and Securing Guide

Current Revision
Publish Date
Change Summary

78-17615-07

April 2011

Added performance route processor (PRP) card to the pallet contents listed in the "Chassis Packaging" section.


Cisco CRS 8-Slot Line Card Chassis Enhanced Router

The following sections provide the latest revision number, publication date, and a summary of changes for the following Cisco CRS Line Card Chassis Enhanced router documents:

Installation Guide

Site Planning Guide

System Description

Unpacking, Moving, and Securing Guide

Installation Guide

Describes how to install power, air circulation, line card, and exterior components into and remove them from a Cisco CRS 8-Slot Line Card Chassis Enhanced router. This installation guide does not provide background information and basic theory-of-operation for anyone wanting to understand the Cisco CRS 8-Slot Line Card Chassis Enhanced router.

Table 9 lists details of the most current release of the Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Enhanced Router Installation Guide.

Table 9 Cisco CRS 8-Slot Line Card Chassis Enhanced Router Installation Guide

Current Revision
Publish Date
Change Summary

OL-25852-04

Sept 2013

Added updates to support new fan tray (CRS-8-FANTRAY-B).

OL-25852-03

June 2013

Added information about how to replace a SFP on a line card that uses an articulated bracket.


Site Planning Guide

Describes how to plan and prepare your site facilities for the installation of a Cisco CRS Carrier Routing System 8-slot Line Card Chassis Enhanced router (also referred to as the "Cisco CRS 8-slot LCC Enhanced router"). The guide provides a brief description of the chassis and its components, and basic site facilities requirements.

The guide also describes all power, cooling, and environmental specifications to consider before ordering and installing the Cisco CRS 8-slot LCC Enhanced router and describes site facilities requirements, such as floor space, weight requirements, receiving and staging, and installation information to help you plan the site where the routing system will be installed.

Table 10 lists details of the most current release of the Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Enhanced Router Site Planning Guide.

Table 10 Cisco CRS 8-Slot Line Card Chassis Enhanced Router Site Planning Guide

Current Revision
Publish Date
Change Summary

OL-25853-02

Sept 2013

Added updates to support new fan tray (CRS-8-FANTRAY-B).

OL-25853-01

Jan 2012

Initial release of this document.

This document introduces the Cisco CRS 8-Slot Line Card Chassis Enhanced router. The Cisco CRS 8-Slot Line Card Chassis Enhanced router includes the following new features:

The mid plane on the enhanced router is redesigned to support 400G per slot.

The enhanced router has its own power and cooling subsystems.

A new power shelf with an upgraded 70 Amp circuit breaker is introduced for the new Cisco CRS 8-Slot Line Card Chassis Enhanced router.

The enhanced router removes the zone circuit breaker and thus, eliminates the need to configure power-zoning.


System Description

Describes the Cisco CRS 8-Slot Line Card Chassis Enhanced router from a system point of view. The guide focuses on the hardware elements, including descriptions of most of the major assemblies, such as the power and cooling systems, the switch fabric, route processor, and modular services cards. It also provides background information and the basic theory of operation for this routing system.

The guide can be read as a supplement to the Site Planning Guide, Installation Guide, and the related software documents.

Table 11 lists details of the most current release of the Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Enhanced Router System Description.

Table 11 Cisco CRS 8-Slot Line Card Chassis Enhanced Router System Description

Current Revision
Publish Date
Change Summary

OL-25854-02

Sept 2013

Added updates to support new fan tray (CRS-8-FANTRAY-B).

OL-25854-01

Jan 2012

Initial release of this document.

This document introduces the Cisco CRS 8-Slot Line Card Chassis Enhanced router. The Cisco CRS 8-Slot Line Card Chassis Enhanced router includes the following new features:

The midplane on the enhanced router is redesigned to support 400G per slot.

The enhanced router has its own power and cooling subsystems.

A new power shelf with an upgraded 70 Amp circuit breaker has been introduced for the new Cisco CRS 8-Slot Line Card Chassis Enhanced router.

The Cisco CRS 8-Slot Line Card Chassis Enhanced router removes the zone circuit breaker and thus, eliminates power-zoning.


Unpacking, Moving, and Securing Guide

Provides instructions for unpacking the Cisco CRS 8-slot LCC Enhanced router and its components, attaching the dolly, moving the chassis safely to its final location, and installing the chassis in a rack. The document does not provide background information and basic theory-of-operation for anyone wanting to understand the Cisco CRS Carrier Routing System.

Table 12 lists details of the most current release of the Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Enhanced Router Unpacking, Moving, and Securing Guide.

Table 12 Cisco CRS 8-Slot Line Card Chassis Enhanced Router Unpacking, Moving, and Securing Guide

Current Revision
Publish Date
Change Summary

OL-25855-01

Jan 2012

Initial release of this document. This document introduces the Cisco CRS 8-Slot Line Card Chassis Enhanced router. The Cisco CRS 8-Slot Line Card Chassis Enhanced router includes the following new features:

The midplane on the enhanced router is redesigned to support 400G per slot.

The router has its own power and cooling subsystems.

A new power shelf with an upgraded 70 Amp circuit breaker has been introduced for the new Cisco CRS 8-Slot Line Card Chassis Enhanced router.

The enhanced router removes the zone circuit breaker and thus, eliminates power-zoning.


Cisco CRS 16-Slot Line Card Chassis

The following sections provide the latest revision number, publication date, and a summary of changes for the following Cisco CRS 16-Slot Line Card Chassis documents:

Installation Guide

Site Planning Guide

System Description

Unpacking, Moving, and Securing Guide

Installation Guide

Describes the installation and removal of the hardware components that make up the system and includes details on the installation and removal of all field-replaceable unit hardware, including the power modules, fan trays, system cards, and other components.

Table 13 lists details of the most current release of the Cisco CRS Carrier Routing System 16-Slot Line Card Chassis Installation Guide.

Table 13 Cisco CRS 16-Slot Line Card Chassis Installation Guide

Current Revision
Publish Date
Change Summary

OL-4594-15

Nov 2011

Added new procedures for installing and removing modular configuration power module slot covers to Chapter 2 "Installing and Removing Power Components."


Site Planning Guide

Describes the planning steps that need to be taken before unpacking, moving, and securing the chassis or system and includes details on the space, power, and cooling requirements that should be planned for prior to installing the chassis or system.

Table 14 lists details of the most current release of the Cisco CRS Carrier Routing System 16-Slot Line Card Chassis Site Planning Guide.

Table 14 Cisco CRS 16-Slot Line Card Chassis Site Planning Guide

Current Revision
Publish Date
Change Summary

OL-6326-13

Sept 2011

Updated Appendix A, "Product IDs" and Appendix C, "Cisco CRS Series Carrier Routing System 16-Slot Line Card Chassis Specifications."


System Description

Describes the hardware components that make up the chassis or system and includes details on the chassis enclosure, power and cooling systems, and all system cards. The system description is a reference publication that contains no procedural steps.

Table 15 lists details of the most current release of the Cisco CRS Carrier Routing System 16-Slot Line Card Chassis System Description.

Table 15 Cisco CRS 16-Slot Line Card Chassis System Description

Current Revision
Publish Date
Change Summary

OL-4624-13

Jan 2012

Corrected weight of the Performance Route Processor (PRP) in Chapter 6 "Route Processor.'


Unpacking, Moving, and Securing Guide

Describes how to unpack the chassis and prepare it for placement at the installation site, as well as how to move the chassis from the loading dock to the installation site and how to mount it in a rack.

Table 16 lists details of the most current release of the Cisco CRS Carrier Routing System 16-Slot Line Card Chassis Unpacking, Moving, and Securing Guide.

Table 16 Cisco CRS 16-Slot Line Card Chassis Unpacking, Moving, and Securing Guide

Current Revision
Publish Date
Change Summary

78-17535-10

August 2011

Updated this document with minor editorial changes.


Cisco CRS 16-Slot Line Card Chassis Enhanced Router

The following sections provide the latest revision number, publication date, and a summary of changes for the following Cisco CRS 16-Slot Line Card Chassis Enhanced router documents:

Installation Guide

Site Planning Guide

System Description

Unpacking, Moving, and Securing Guide

Installation Guide

Describes how to install components into and remove them from a line card chassis. The installation guide does not provide background information and basic theory-of-operation for anyone wanting to understand the Cisco CRS Series Enhanced 16-Slot Line Card Chassis.

Table 17 lists details of the most current release of the Cisco CRS Carrier Routing System 16-Slot Line Card Chassis Enhanced Router Installation Guide.

Table 17 Cisco CRS 16-Slot Line Card Chassis Enhanced Router Installation Guide

Current Revision
Publish Date
Change Summary

OL-25576-02

May 2012

Updates to procedures, specifications, and illustrations.


Site Planning Guide

Describes the basic facility requirements, such as floor space, power requirements, and environmental requirements, for the Cisco CRS 16-Slot Line Card Chassis Enhanced router. The guide is intended to help you plan the sites where the chassis will be installed. You should use this guide with Cisco site planning coordinators and site inspectors, well in advance of the delivery of the chassis.

Table 18 lists details of the most current release of the Cisco CRS Carrier Routing System 16-Slot Line Card Chassis Enhanced Router Site Planning Guide.

Table 18 Cisco CRS 16-Slot Line Card Chassis Enhanced Router Site Planning Guide

Current Revision
Publish Date
Change Summary

OL-25577-02

May 2012

Minor text, illustration, and specification updates.


System Description

Describes the Cisco CRS 16-Slot Line Card Chassis Enhanced router from a high level. It provides background information and basic theory of operation for anyone wanting to understand the routing system. It describes the major assemblies that comprise the routing system. It can be read as a supplement to the site planning guide, installation documents, and software documents. This system description focuses on the hardware elements of the routing system.

Table 19 lists details of the most current release of the Cisco CRS Carrier Routing System 16-Slot Line Card Chassis Enhanced Router System Description.

Table 19 Cisco CRS 16-Slot Line Card Chassis Enhanced Router System Description

Current Revision
Publish Date
Change Summary

OL-25578-02

May 2012

Minor updates to Route Processor dimensions and product specifications.


Unpacking, Moving, and Securing Guide

Provides instructions for unpacking the Cisco CRS Series 16-Slot Line Card Chassis Enhanced router and its components, attaching the dolly, moving the chassis safely, and securing the chassis to the floor. This document does not provide background information and basic theory-of-operation for anyone wanting to understand the Cisco CRS Carrier Routing System.

Table 20 lists details of the most current release of the Cisco CRS Carrier Routing System 16-Slot Line Card Chassis Enhanced Router Unpacking, Moving, and Securing Guide.

Table 20 Cisco CRS 16-Slot Line Card Chassis Enhanced Router Unpacking, Moving, and Securing Guide

Current Revision
Publish Date
Change Summary

OL-25575-02

May 2012

Updates to dolly procedures and illustrations, and minor text corrections.


Cisco CRS PLIMs

The following sections provide a description, current revision number and publication date, and a summary of changes for the following Cisco CRS Physical Layer Interface Module (PLIM) documents:

Cisco CRS Carrier Routing System Ethernet Physical Layer Interface Module Installation Note

Cisco CRS Carrier Routing System Packet-over-SONET/SDH Physical Layer Interface Module Installation Note

Cisco CRS 20 Gbps Carrier Grade Services Engine Physical Layer Interface Module Installation Note

Cisco CRS Carrier Routing System Ethernet Physical Layer Interface Module Installation Note

Describes the Ethernet PLIMs used in the Cisco CRS router Carrier Routing System 16-slot, 8-slot, and 4-slot line card chassis (LCC). This document also provides an overview of the different Ethernet PLIMs and provides instructions on how to remove and install a PLIM and its associated components.

Table 21 lists details of the most current release of the Cisco CRS Carrier Routing System Ethernet Physical Layer Interface Module Installation Note.

Table 21 Cisco CRS Ethernet Physical Layer Interface Module Installation Note

Current Revision
Publish Date
Change Summary

OL-6437-13

June 2013

Added information about how to replace a SFP on a line card that uses an articulated bracket.

OL-6347-11

May 2012

Added information about the CFP-100G-SR10 optical module on the Cisco CRS-3 Series Router platform.

This CFP-100G-SR10 optical module enables connection to the Cisco CRS-3 Series Router 1-port 100-GE PLIM using multimode fiber rather than only single mode fiber.

OL-6347-10

February 2012

Added information about the articulated cable bracket for the 20-port 1-GE FLEX PLIM and the 42-port 1-GE XFP PLIM to the "Removing a PLIM Cable Management Bracket" section and the "Installing a PLIM Cable Management Bracket" section.


Cisco CRS Carrier Routing System Packet-over-SONET/SDH Physical Layer Interface Module Installation Note

Describes the Packet-over-SONET/SDH (POS) physical layer interface modules (PLIMs) used in the Cisco CRS Carrier Routing System 16-slot and 8-slot line card chassis (LCC). This document also provides an overview of the different POS PLIMs and provides instructions on how to remove and install a PLIM and its associated components.

Table 22 lists details of the most current release of the Cisco CRS Carrier Routing System Packet-over-SONET/SDH Physical Layer Interface Module Installation Note.

Table 22 Cisco CRS Packet-over-SONET/SDH Physical Layer Interface Module Installation Note

Current Revision
Publish Date
Change Summary

OL-6437-03

Nov 2006

Added information about the 1-port OC-768c/STM-256c WDMPOS PLIM to the "OC-768c/STM-256c WDMPOS PLIM" section.

Added cable management information to the "How to Remove or Install a PLIM Cable Management Bracket" section.

Added optics information for the 1-port OC-768c/STM-256c WDMPOS PLIM to the "OC-768c/STM-256c WDMPOS PLIM Interfaces" section.


Cisco CRS 20 Gbps Carrier Grade Services Engine Physical Layer Interface Module Installation Note

Describes the 20 Gbps Carrier Grade Services Engine physical layer interface module (PLIM) used in the Cisco CRS-1 router 16-slot, 8-slot, and 4-slot line card chassis (LCC). This document also provides an overview of the PLIM and provides instructions on how to remove and install a PLIM and its associated components.

Table 23 lists details of the most current release of the Cisco CRS Gbps Carrier Grade Services Engine Physical Layer Interface Module Installation Note.

Table 23 Cisco CRS Gbps Carrier Grade Services Engine Physical Layer Interface Module Installation Note

Current Revision
Publish Date
Change Summary

OL-17454-02

June 2010

Added new information about troubleshooting and configuring the 20 Gbps Carrier Grade Services Engine PLIM.


Cisco CRS SIP and SPA Hardware Installation Guide

Describes the SIPs and SPAs that are supported on the Cisco CRS-1 Carrier Routing System. This document also describes how to install the supported SIPs and SPAs and how to troubleshoot the installation.

Table 24 lists details of the most current release of the Cisco CRS SIP and SPA Hardware Installation Note.

Table 24 Cisco CRS SIP and SPA Hardware Installation Note

Current Revision
Publish Date
Change Summary

OL-17439-04

Sept 2013

Information was added to Chapter 4, "Overview: Cisco CRS Shared Port Adapters," about the following SPAs:

· 2-Port OC-48c/STM-16 POS SPA

· 4-Port OC-3c/STM-1 POS SPA

· 1-Port 10-Gigabit Ethernet SPA

· 10-Port Gigabit Ethernet SPA

These SPAs are now supported on the Cisco CRS-3 Flexible PLIM.

OL-17439-03

May 2013

Information was added to Chapter 4, "Overview: Cisco CRS Shared Port Adapters," about the following SPAs:

· 4-Port OC-12c/STM-4 POS SPA

· 8-Port OC-3c/STM-1 POS SPA

The 4-Port and 8-Port OC-3c/STM-1 POS SPA and the 4-Port and 8-Port OC-12c/STM-4 POS SPA are now supported on the Cisco CRS-3 Flexible PLIM.

OL-17439-02

December 2012

Information about the new Cisco CRS-3 Flexible PLIM was added, and a new chapter, Chapter 3, "Overview: Cisco CRS-3 Flexible PLIM" was created. Supported SPA types were added to Chapter 4, "Overview: Cisco CRS Shared Port Adapters."

OL-17439-01

March 2009

Added information about the 1-Port Clear Channel OC-3 ATM SPA to Chapter 1, "SIP and SPA Product Overview" and Chapter 3, "Overview: Cisco CRS-1 Shared Port Adapters."

Added information about Dynamic Packet Transport (DPT) support for 2-Port and 4-Port OC-48c/STM-16 POS SPA and 1-Port OC-192c/STM-64 POS/RPR XFP SPA to Chapter 3, "Overview: Cisco CRS-1 Shared Port Adapters."


Regulatory Compliance and Safety Information

The following sections provide a description, current revision number and publication date, and a summary of changes for the following Cisco CRS Carrier Routing System Regulatory Compliance and Safety Information (RCSI) documents:

RSCI for the Cisco CRS Carrier Routing System

RSCI for the Cisco CRS Power Distribution Unit

RSCI for the Cisco CRS Carrier Routing System

Describes the international agency compliance, safety, and statutory information that applies to all Cisco CRS Carrier Routing Systems and their associated devices. This document also includes translations of the safety warnings that appear in Cisco CRS Carrier Routing System publications.

Table 25 lists details of the most current release of the Regulatory Compliance and Safety Information for the Cisco CRS Carrier Routing System.

Table 25 Regulatory Compliance and Safety Information for the Cisco CRS Router

Current Revision
Publish Date
Change Summary

78-16150-10

October 2010

Added Cisco CRS-3 description. Updated "Statement 191—VCCI Class A Warning for Japan."


RSCI for the Cisco CRS Power Distribution Unit

Provides regulatory compliance and safety information for the Cisco CRS Power Distribution Unit (PDU).

Table 26 lists details of the most current release of the Regulatory Compliance and Safety Information for the Cisco CRS Power Distribution Unit.

Table 26 Regulatory Compliance and Safety Information for the Cisco CRS PDU

Current Revision
Publish Date
Change Summary

78-19561-02

Sept 2010

Technical change made.


Cisco CRS Fabric Card Chassis

The following sections provide a description, current revision number and publication date, and a summary of changes for the following Cisco CRS Fabric Card Chassis documents:

Unpacking, Moving, and Securing Guide

Installation Guide

Integrated Switch Controller Card Installation Tasks

Unpacking, Moving, and Securing Guide

Provides instructions for unpacking the Cisco CRS Fabric Card Chassis (FCC) and its components, moving the chassis to its permanent location, and mounting and securing the chassis. The companion document to this guide is Cisco CRS Carrier Routing System Multishelf System Site Planning Guide, which describes how to plan and prepare your site facilities for the installation of a switch fabric card chassis.

Table 27 lists details of the most current release of the Cisco CRS Carrier Routing System Fabric Card Chassis Unpacking, Moving, and Securing Guide.

Table 27 Cisco CRS Fabric Card Chassis Unpacking, Moving, and Securing Guide

Current Revision
Publish Date
Change Summary

78-17535-10

August 2011

Updated this document with minor editorial changes.


Installation Guide

Describes how to install components into and remove them from a Fabric Card Chassis (FCC). This installation guide does not provide background information and basic theory-of-operation for anyone wanting to understand the Cisco CRS Carrier Routing System.

Table 28 lists details of the most current release of the Cisco CRS Carrier Routing System Fabric Card Chassis Installation Guide.

Table 28 Cisco CRS Fabric Card Chassis Installation Guide

Current Revision
Publish Date
Change Summary

OL-4603-14

February 2012

Added a note to the procedure "Powering Up and Down a Chassis with Fixed Configuration DC Power" section.


Integrated Switch Controller Card Installation Tasks

Explains how to verify the formatting on a new switch controller card hard disk, and how to correct the formatting if necessary.

Note For the majority of customers, the new switch controller card hard disk is shipped with the correct formatting and no further action is required.

Table 29 lists details of the most current release of the Cisco CRS Fabric Chassis Integrated Switch Controller Card Installation Tasks.

Table 29 Cisco CRS Fabric Chassis Integrated Switch Controller Card Installation Tasks

Current Revision
Publish Date
Change Summary

OL-22932-01

June 2010

Initial draft of this document.


Cisco CRS FRUs

The following sections provide a description, current revision number and publication date, and a summary of changes for the following Cisco CRS Field-Replaceable Unit (FRU) documents:

Cisco CRS 3-Phase AC Power Distribution Unit Installation Guide

Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide

CRS-PRP Routing Processor Migration

Flash Disk Upgrade Tasks

Cisco CRS 3-Phase AC Power Distribution Unit Installation Guide

Describes the various Cisco CRS Power Distribution Unit (PDU) kits, including safety warnings and general power and grounding requirements. This document also describes how to install and remove a PDU.

Table 30 lists details of the most current release of the Cisco CRS 3-Phase AC Power Distribution Unit Installation Guide.

Table 30 Cisco CRS 3-Phase AC Power Distribution Unit Installation Guide

Current Revision
Publish Date
Change Summary

OL-23476-03

July 2011

Added technical information and new procedures for installing and removing a Cisco CRS PDU kit on a Cisco CRS fabric card chassis. New AC cord clamp information was added. Minor technical and editorial updates were made.


Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide

Describes how to upgrade a Cisco CRS-1 Carrier Routing System to a Cisco CRS-3 Carrier Routing System and downgrade your Cisco CRS-3 Carrier Routing System back to a Cisco CRS-1 Carrier Routing System for each chassis type:

Table 31 lists details of the most current release of the Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide.

Table 31 Cisco CRS-1 to Cisco CRS-3 Migration Guide

Current Revision
Publish Date
Change Summary

OL-13669-03

April 2011

Adds CRS-3 multishelf support.


CRS-PRP Routing Processor Migration

Describes three methods available to migrate from the Cisco RP-A or RP-B Routing Processor to the new Cisco CRS-PRP Routing Processor.

Table 32 lists details of the most current release of the CRS-PRP Processor Migration.

Table 32 CRS-PRP Routing Processor Migration

Current Revision
Publish Date
Change Summary

OL-24839-01

 

Initial release.


Flash Disk Upgrade Tasks

Describes managing the flash disk of the Cisco XR 12000 Series Router of the Cisco CRS-1 Router, including resolving flash disk space shortage, upgrading a flash disk, and downgrading a flash disk.

Table 33 lists details of the most current release of the Flash Disk Upgrade Tasks.

Table 33 Flash Disk Upgrade Tasks

Current Revision
Publish Date
Change Summary

Release 3.8.1
OL-17437-01

March 2011

Added flash disk upgrade procedure for Cisco IOS XR 3.6 or 3.7 (4G FAT16) to 3.8 (4G FAT32) software.

Added flash disk downgrade procedure for Cisco IOS XR 3.8 (4G FAT32) to 3.7 or 3.6 (4G FAT16) software.


CRS DRR DIMM Memory Upgrade

Describes procedures for upgrading or replacing DIMM memory on the Cisco CRS routers.

Table 34 lists details of the most current release of the Cisco CRS Router Memory Replacement Instructions.

Table 34 Cisco CRS Router Memory Replacement Instructions

Current Revision
Publish Date
Change Summary

OL-26710-01

 

Initial release.


Cisco CRS Multishelf System

The following sections provide a description, current revision number and publication date, and a summary of changes for the following Cisco CRS Multishelf System documents:

Interconnection and Cabling Guide

Site Planning Guide

System Description

Installation Guide

Interconnection and Cabling Guide

Describes how to interconnect the switch fabric cards of the chassis that comprise the Cisco CRS Carrier Routing System Multishelf System. This cabling guide supplements other multishelf system documentation, such as the site planning guide, installation documents, and software documents.

Table 35 lists details of the most current release of the Cisco CRS Carrier Routing System Multishelf System Interconnection and Cabling Guide.

Table 35 Cisco CRS Multishelf System Interconnection and Cabling Guide

Current Revision
Publish Date
Change Summary

OL-7157-09

August 2011

Added horizontal cabling descriptions and cabling plans, corrected illustrations and tables, and removed references to eight Fabric Card Chassis (FCC) throughout.


Site Planning Guide

Describes the basic facility requirements, such as floor space, power requirements, environmental requirements, for the FCC and the multishelf system. This guide is intended to help you plan the sites where the chassis will be installed. It should be used with Cisco site planning coordinators and site inspectors, well in advance of the delivery of the chassis.

Table 36 lists details of the most current release of the Cisco CRS Carrier Routing System Multishelf System Site Planning Guide.

Table 36 Cisco CRS Multishelf System Site Planning Guide

Current Revision
Publish Date
Change Summary

OL-7422-06

October 2011

Updated information about fixed and modular configuration AC and DC power systems. Added new modular configuration AC cord clamp. Technical and editorial updates were made.


System Description

Provides an overview of the multishelf system, including a detailed physical description of the FCC DC and AC power systems, the chassis cooling system.

This document also provides an overview of the shelf controller Gigabit Ethernet card and the optical interfaces and connection monitoring card installed in the FCC.

Table 37 lists details of the most current release of the Cisco CRS Carrier Routing System Multishelf System Description.

Table 37 Cisco CRS Multishelf System Description

Current Revision
Publish Date
Change Summary

OL-7071-07

March 2011

Updated document to include AC modular configuration power solution and the CRS-FCC-SFC-140 for the 140G CRS-3 system.


Installation Guide

Describes how to install components into and remove them from a Fabric Card Chassis (FCC). This installation guide does not provide background information and basic theory-of-operation for anyone wanting to understand the Cisco CRS Carrier Routing System.

Table 38 lists details of the most current release of the Cisco CRS Carrier Routing System Fabric Card Chassis Installation Guide.

Table 38 Cisco CRS Fabric Card Chassis Installation Guide

Current Revision
Publish Date
Change Summary

OL-4603-14

Jan 2010

Added new fiber cable trough, to the "Installing the New CRS-1 Fabric Card Chassis Fiber Guide and Cutout Assembly" section.


Cisco CRS-3 Multishelf System

The following sections provide a description, current revision number and publication date, and a summary of changes for the following Cisco CRS-3 Multishelf System documents:

Interconnection and Cabling Guide

Site Planning Guide

16-Slot Back-to-Back Cabling and Upgrade Guide

Describes how to interconnect the two 16-slot chassis that comprise the CRS-3 Back-to-Back System. This cabling guide supplements other multishelf system documentation, such as the site planning guide, installation documents, and software documents.

Table 39 lists details of the most current release of the Cisco CRS-3 Carrier Routing System 16-Slot Back-to-Back Cabling and Upgrade Guide.

Table 39 Cisco CRS-3 Carrier Routing System 16-Slot Back-to-Back Cabling and Upgrade Guide

Current Revision
Publish Date
Change Summary

OL-26705-01

June 2012

Initial release.


8-Slot Back-to-Back Cabling and Upgrade Guide

Describes how to interconnect the two 8-slot chassis that comprise the CRS-3 Back-to-Back System. This cabling guide supplements other multishelf system documentation, such as the site planning guide, installation documents, and software documents.

Table 40 lists details of the most current release of the Cisco CRS-3 Carrier Routing System 8-Slot Back-to-Back Cabling and Upgrade Guide.

Table 40 Cisco CRS-3 Carrier Routing System 8-Slot Back-to-Back Cabling and Upgrade Guide

Current Revision
Publish Date
Change Summary

OL-28921-01

May 2013

Initial release.


Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.