Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide, Release 5.1.x
XML Support for BNG Features
Downloads: This chapterpdf (PDF - 1.28MB) The complete bookPDF (PDF - 5.7MB) | Feedback

XML Support for BNG Features

XML Support for BNG Features

Most BNG features, such as AAA, DHCP, Policy Plane, PPPoE, DAPS, and Subscriber Database support XML based router configuration. The Cisco XML API can be used to configure routers or request information about configuration, management, and operation of the routers. For details about using the Cisco XML API, see the latest release of Cisco IOS XR XML API Guide listed at http:/​/​www.cisco.com/​en/​US/​products/​ps9853/​products_​programming_​reference_​guides_​list.html.

The Cisco XML API uses XML commands to configure the router. The following sections list the supported XML commands for the BNG features.

AAA XML Support

The support for XML is available for RADIUS that retrieves the accounting and authorization request statistics. The mapping between CLI and XML entries for the AAA commands are as follows:

CLI XML
radius-server dead-criteria time AAA.RADIUS. DeadCriteria.Time
radius-server dead-criteria tries AAA.RADIUS. DeadCriteria.Tries
radius-server ipv4 dscp <value> AAA.RADIUS. IPv4.DSCP
radius-server key {0 | 7 | LINE} AAA.RADIUS.Key
radius-server retransmit <limit> AAA.RADIUS.Retransmit
radius-server timeout <number> AAA.RADIUS.Timeout
radius-server source-port extended AAA.RADIUS.SourcePort.Extended
radius-server deadtime AAA.RADIUS.DeadTime
radius-server load-balance method least-outstanding AAA.RADIUS.LoadBalance.Method.LeastOutstanding
radius-server attribute list <attribute-name> AAA.RADIUS.AttributeListTable.AttributeList.Enable
radius-server attribute list <attribute-name> attribute <radius-attributes> AAA.RADIUS.AttributeListTable.AttributeList.Attribute
radius-server vsa attribute ignore unknown AAA.RADIUS.VSA.Attribute.Ignore.Unknown
Radius-server host <> retransmit AAA.RADIUS.HostTable.Host.Retransmit
Radius-server host <> timeout AAA.RADIUS.HostTable.Host.Timeout
radius-server host <> key {0 | 7 | LINE} AAA.RADIUS.HostTable.Host.Key
aaa server radius dynamic-author client <ip-address> vrf <vrf-name> server-key {0 | 7 | LINE} AAA.RADIUS.DynamicAuthorization.ClientTable.Client.ServerKey
aaa server radius dynamic-author ignore {server key | session key } AAA.RADIUS.DynamicAuthorization.Ignore
aaa server radius dynamic-author port <port num> AAA.RADIUS.DynamicAuthorization.Port
aaa accounting system default start-stop [broadcast] {group {radius | NAME1}} [group NAME2..] aaa accounting system rp-failover default start-stop [broadcast] {group {radius | NAME1}} [group NAME2.. AAA.AccountingTable.Accounting
aaa radius attribute nas-port-id format FORMAT_NAME AAA.RADIUSAttribute.NASPortID.Format
aaa group server radius <group-name> { authorization } { reply | reject} <name> AAA.ServerGroups.RADIUSServerGroupTable.RADIUSServerGroup.Authorization.Reply
aaa group server radius <group-name> { authorization} { accept | request } <name> AAA.ServerGroups.RADIUSServerGroupTable.RADIUSServerGroup.Authorization.Request
aaa group server radius <group-name> { accounting } { accept | request} <name> AAA.ServerGroups.RADIUSServerGroupTable.RADIUSServerGroup.Accounting.Request
aaa group server radius <group-name> { accounting } { reply | reject} <name> AAA.ServerGroups.RADIUSServerGroupTable.RADIUSServerGroup.Accounting.Reply
aaa group server radius <group-name> load-balance method least-bounding AAA.ServerGroups.RADIUSServerGroupTable.RADIUSServerGroup.LoadBalance.Method. LeastBounding
aaa group server radius group1 source-interface AAA.ServerGroups.RADIUSServerGroupTable.RADIUSServerGroup.SourceInterface
aaa group server radius <radius-group> vrf <> AAA.ServerGroups.RADIUSServerGroupTable.RADIUSServerGroup.VRF
aaa group server radius <radius-group> deadtime <> AAA.ServerGroups.RADIUSServerGroupTable.RADIUSServerGroup.DeadTime
aaa group server radius <> server-private <host> AAA.ServerGroups.RADIUSGroupTable.RADIUSGroup.PrivateServerTable.PrivateServer
show radius accounting RADIUS.Accounting
show radius authentication RADIUS.Authentication
show radius client RADIUS.Client
show radius dynamic-author RADIUS.DynamicAuthorization
show radius dead-criteria host <ip> RADIUS.DeadCriteria.HostTable.Host
show radius server-groups RADIUS.ServerGroups

DHCP XML Support

The support for XML is available for DHCP that retrieves the client bindings, profile information, and DHCPv4 proxy statistics. It allows the management clients to perform client bindings based on Circuit-ID, Remote-ID, Mac-Address, user profile information, and DHCPv4 proxy statistics. The mapping between CLI and XML entries for the DHCP commands are as follows:

CLI XML
dhcp ipv4 profile <name> proxy relay information check DHCPv4.ProfileTable.Profile.Proxy.RelayInformation.Check
dhcp ipv4 profile <name>proxy relay information option[vpn | allow-untrusted | remote-id <name>] DHCPv4.ProfileTable.Profile.Proxy.RelayInformation.AllowUntrusted

DHCPv4.ProfileTable.Profile.Proxy.RelayInformation.VPN

DHCPv4.ProfileTable.Profile.Proxy.RelayInformation.RemoteID

dhcp ipv4 interface GigabitEthernet <interface-name> proxy profile <name> DHCPv4.InterfaceTable.Interface.Proxy.Profile
dhcp ipv4 profile <name>proxy relay information policy [drop | keep | replace] DHCPv4.ProfileTable.Profile.Proxy.RelayInformation.Policy
dhcp ipv4 profile <name>proxy helper-address [ vrf <name> ] <server-ip-addr> [ giaddr <ip-addr> ] DHCPv4.ProfileTable.Profile.Proxy.VRFTable.VRF.HelperAddressTable.HelperAddress
dhcp ipv4 profile <name> proxy broadcast-flag policy check DHCPv4.ProfileTable.Profile.Proxy.BroadcastFlag.Policy
dhcp ipv4 profile <name>proxy class <class-name>

helper-address [vrf <name>] <server-ip-addr> [ giaddr <ip-addr> ]

match vrf <name> match option [ 124 | 125 | 60 | 77 ] hex <value> [ mask <value> ]

DHCPv4.ProfileTable.Profile.Proxy.ClassTable.Class

DHCPv4.ProfileTable.Profile.Proxy.ClassTable.Class.VRFTable.VRF.

HelperAddressTable.HelperAddress

DHCPv4.ProfileTable.Profile.Proxy.ClassTable.Class.Match.VRF

DHCPv4.ProfileTable.Profile.Proxy.ClassTable.Class.Match.Option

dhcp ipv4 interface <interface> none DHCPv4.InterfaceTable.Interface.None
dhcp ipv4 interface <interface> proxy [information option format-type circuit-id <cir-id>] DHCPv4.InterfaceTable.Interface.Proxy.CircuitID
dhcp ipv4 vrf vrfname proxy profile <name> DHCPv4.VRFTable.VRF
show dhcp ipv4 proxy binding circuit-id <cid> location <locationSpecifier> DHCPv4.NodeTable.Node.Proxy.Binding.ClientTable[DHCPv4ProxyCircuitIDFilter(Naming CircuitID)]
show dhcp ipv4 proxy binding remote-id <rid> location <locationSpecifier> DHCPv4.NodeTable.Node.Proxy.Binding.ClientTable[DHCPv4ProxyRemoteIDFilter(Naming RemoteID)]
show dhcp ipv4 proxy binding interface <ifSpecifier> DHCPv4.NodeTable.Node.Proxy.Binding.ClientTable[DHCPv4ProxyInterfaceFilter(Naming InterfaceName)]
show dhcp ipv4 proxy binding mac-address <addr> location <locationSpecifier> DHCPv4.NodeTable.Node.Proxy.Binding.ClientTable[DHCPv4ProxyMACAddressFilter(Naming MACAddress)]
show dhcp ipv4 proxy binding location <locationSpecifier> DHCPv4.NodeTable.Node.Proxy.Binding.ClientTable[DHCPv4ProxyBriefFilter]
show dhcp ipv4 proxy binding detail location <locationSpecifier> DHCPv4.NodeTable.Node.Proxy.Binding.ClientTable.Client
show dhcp ipv4 proxy binding summary location <locationSpecifier> DHCPv4.NodeTable.Node.Proxy.Binding.Summary
show dhcp ipv4 proxy binding vrf <vrfname> DHCPv4.NodeTable.Node.Proxy.Binding.ClientTable[DHCPv4PProxyVRFFilter(Naming VRFName)]
show dhcp ipv4 proxy profile name <profile-name> location <locationSpecifier> DHCPv4.NodeTable.Node.Proxy.ProfileTable.Profile
show dhcp vrf <name> ipv4 proxy statistics location <locationSpecifier> DHCPv4.NodeTable.Node.Proxy.VRFTable.VRF.Statistics
show dhcp ipv4 proxy statistics [ location < loc > ] DHCPv4.NodeTable.Node.Proxy.Statistics

Control Policy XML Support

The support for XML is available for policy plane that retrieves subscriber management and subscriber session related information. The mapping between CLI and XML entries for the control policy commands are as follows:

CLI XML
interface <intf> service-policy type control subscriber <policy-name> InterfaceConfigurationTable.InterfaceConfiguration.ControlSubscriber.ServicePolicy
sh sub sess all loc <loc> Subscriber.Session.NodeTable.Node.SessionTable
sh sub sess all detail loc <loc> Subscriber.Session.NodeTable.Node.SessionTable(SubscriberDetailAllSessionFilter)
sh sub sess all summary loc <loc> Subscriber.Session.NodeTable.Node.Summary
sh sub sess all username loc <loc> Subscriber.Session.NodeTable.Node.SessionTable(SubscriberAllUsenameFilter)
sh sub sess filter interface <intf-name> loc <loc> Subscriber.Session.NodeTable.Node.SessionTable(SubscriberInterfaceBriefFilter) {Naming InterfaceName}
sh sub sess filter interface <intf-name> detail loc <loc> Subscriber.Session.NodeTable.Node.SessionTable(SubscriberInterfaceDetailFilter) {Naming InterfaceName}
sh sub sess filter ipv4-address <IPv4-addr> loc <loc> Subscriber.Session.NodeTable.Node.SessionTable(SubscriberIPv4AddressVRFDetailFilter) {Naming VRF Name, Address}
sh sub sess filter ipv4-address <IPv4-addr> detail loc <loc> Subscriber.Session.NodeTable.Node.SessionTable(SubscriberIPv4AddressVRFBriefFilter) {Naming VRF Name, Address}
sh sub sess filter mac-address <mac-addr> loc <loc> Subscriber.Session.NodeTable.Node.SessionTable(SubscriberMACAddressBriefFilter) {Naming MACAddress}
sh sub sess filter mac-address <mac-addr> detail loc <loc> Subscriber.Session.NodeTable.Node.SessionTable(SubscriberMACAddressDetailFilter) {Naming MACAddress}
sh sub sess filter state <state> loc <loc> Subscriber.Session.NodeTable.Node.SessionTable(SubscriberStateBriefFilter) {Naming State}
sh sub sess filter state <state> detail loc <loc> Subscriber.Session.NodeTable.Node.SessionTable(SubscriberStateDetailFilter) {Naming State}
sh sub sess filter username <uname> loc <loc> Subscriber.Session.NodeTable.Node.SessionTable(SubscriberUsernameBriefFilter) {Naming Username}
sh sub sess filter username <uname> detail loc <loc> Subscriber.Session.NodeTable.Node.SessionTable(SubscriberUsernameDetailFilter) {Naming Username}
sh sub sess filter ipv4-address <IPv4 addr> vrf <vrf> loc <loc> Subscriber.Session.NodeTable.Node.SessionTable(SubscriberIPv4AddressVRFBriefFilter) {Naming VRF Name, Address}
sh sub sess filter ipv4-address <IPv4-addr> vrf <vrf> detail loc <loc> Subscriber.Session.NodeTable.Node.SessionTable(SubscriberIPv4AddressVRFDetailFilter) {Naming VRF Name, Address}
sh sub sess filter vrf <vrf-name> loc <loc> Subscriber.Session.NodeTable.Node.SessionTable(SubscriberIPv4AddressVRFBriefFilter) {Naming VRF Name, Address }
sh sub sess filter vrf <vrf-name> detail loc <loc> Subscriber.Session.NodeTable.Node.SessionTable(SubscriberIPv4AddressVRFDetailFilter) {Naming VRF Name, Address }
sh sub sess sub-label <0-ffffffff> loc <loc> Subscriber.Session.NodeTable.Node.SessionTable.Session{Naming SessionID}
sh sub man stat AAA accounting loc <loc> Subscriber.Manager.NodeTable.Node.Statistics.AAA.Accounting
sh sub man stat AAA accounting total loc <loc> Subscriber.Manager.NodeTable.Node.Statistics.AAA.AggregateAccounting
sh sub man stat AAA authentication loc <loc> Subscriber.Manager.NodeTable.Node.Statistics.AAA.Authentication
sh sub man stat AAA authentication total loc <loc> Subscriber.Manager.NodeTable.Node.Statistics.AAA.AggregateAuthentication
sh sub man stat AAA authorization loc <loc> Subscriber.Manager.NodeTable.Node.Statistics.AAA.Authorization
sh sub man stat AAA authorization total loc <loc> Subscriber.Manager.NodeTable.Node.Statistics.AAA.AggregateAuthorization
sh sub man stat AAA COA loc <loc> Subscriber.Manager.NodeTable.Node.Statistics.AAA.ChangeOfAuthorization
sh sub man stat AAA COA total loc <loc> Subscriber.Manager.NodeTable.Node.Statistics.AAA.AggregateChangeOfAuthorization
sh sub man stat AAA all loc <loc> Subscriber.Manager.NodeTable.Node.Statistics.AAA
sh sub man stat AAA all total loc <loc> Subscriber.Manager.NodeTable.Node.Statistics.AAA
sh sub man stats summary total <loc> Subscriber.Manager.NodeTable.Node.Statistics.AggregateSummary

DAPS XML Support

The support for XML is available for distributed address pool service (DAPS) that retrieves the pool parameters for distributed address pool services, and allows the management clients to get number of free, allocated and excluded addresses based on VRF and pool name. The mapping between CLI and XML entries for the DAPS commands are as follows:

CLI XML
pool vrf <vrf-name> ipv4 <poolname>pool ipv4 <poolname> PoolService.VRFTable.VRF.IPv4.Pool.Enable
pool vrf <VRFName> ipv4 <PoolName> * address-range <RangeStart> <RangeEnd>pool ipv4 <PoolName> * address-range <RangeStart> <RangeEnd> PoolService.VRFTable.VRF.IPv4.Pool.AddressRangeTable.AddressRange
pool vrf <VRFName> ipv4 <PoolName> * exclude <RangeStart> <RangeEnd>pool vrf <VRFName> ipv4 <PoolName> * exclude <RangeStart> <RangeEnd>pool ipv4 <PoolName> * exclude <RangeStart> <RangeEnd> PoolService.VRFTable.VRF.IPv4.Pool.ExcludeTable.Exclude
Pool vrf <VRFName> ipv4 <PoolName> utilization-mark high <>pool ipv4 <PoolName> utilization-mark high <> PoolService.VRFTable.VRF.IPv4.Pool.UtilizationMark.High
Pool vrf <VRFName> ipv4 <PoolName> utilization-mark low <>pool ipv4 <PoolName> utilization-mark low <> PoolService.VRFTable.VRF.IPv4.Pool.UtilizationMark.Low
show pool vrf <vrf-name> ipv4 PoolService.NodeTable.Node.VRFTable.VRF.IPv4
show pool ipv4 name <poolname> PoolService.NodeTable.Node.PoolTable.Pool.IPv4.Detail
show pool ipv4 name <poolname> verbose PoolService.NodeTable.Node.PoolTable.Pool.IPv4.Verbose
show pool ipv4show pool vrf all ipv4 PoolService.NodeTable.Node.VRFTable

PPPoE XML Support

XML support is available for PPP over Ethernet (PPPoE) sessions. The mapping between CLI and XML entries for the PPPoE feature commands are:

CLI XML
pado delay {<delay>} set PadoDelay.Default {<delay>}
pado delay circuit-id {<delay>} set PadoDelay.CircuitId {<delay>}
pado delay remote-id {<delay>} set PadoDelay.RemoteId {<delay>}
pado delay circuit-id string {<string>} {<delay>} set PadoDelay.CircuitIdString{<string>} {<delay>}
pado delay circuit-id contains {<string>} {<delay>} set PadoDelay.CircuitIdSubString{<string>} {<delay>}
pado delay remote-id string {<string>} {<delay>} set PadoDelay.RemoteIdString{<string>} {<delay>}
pado delay remote-id contains {<string>} {<delay>} set PadoDelay.RemoteIdSubString{<string>} {<delay>}
pado delay service-name string {<string>} {<delay>} set PadoDelay.ServiceNameString{<string>} {<delay>}
pado delay service-name contains {<string>} {<delay>} set PadoDelay.ServiceNameSubString{<string>} {<delay>}
pppoe session-id space flat set SessionIDSpaceFlat {TRUE}
pppoe bba-group {<group-name>} PPPoECfg.BBAGroup {<group-name>}
pppoe enable bba-group {<group-name>} set PPPoE.EnableBBAGroup {<group-name>}
ac name {<name>} set Tags.ACName {<name>}
service name {<name>} set Tags.ServiceName(<name>).ServiceNameConfigured
service selection disable set Tags.ServiceSelectionDisable
tag ppp-max-payload deny set Tags.PPPMaxPayloadDeny
tag ppp-max-payload minimum {<min>} maximum {<max>} set Tags.PPPMaxPayload {<min>,<max>}
mtu {<mtu>} set MTU {<mtu>}
sessions max limit {limit} threshold {<threshold>} set Sessions.MaxLimit {<limit>,<threshold>}
sessions access-interface limit {<count>} [threshold {<threshold>}] set Sessions.AccessInterfaceLimit {<count>,<threshold>}
sessions mac limit {<count>} [threshold {<threshold>}] set Sessions.MacLimit {<count>,<threshold>}
sessions mac-iwf limit {<count>} [threshold {<threshold>}] set Sessions.MacIWFLimit {<count>,<threshold>}
sessions mac access-interface limit {<count>} [threshold {<threshold>}] set Sessions.MacAccessInterfaceLimit {<count>,<threshold>}
sessions mac-iwf access-interface limit {<count>} [threshold {<threshold>}] set Sessions.MacIWFAccessInterfaceLimit {<count>,<threshold>}
sessions circuit-id limit {<count>} [threshold {<threshold>}] set Sessions.CircuitIDLimit {<count>,<threshold>}
sessions remote-id limit {<count>} [threshold {<threshold>}] set Sessions.RemoteIDLimit {<count>,<threshold>}
sessions circuit-id-and-remote-id limit {<count>} [threshold {<threshold>}] set Sessions.CircuitIDAndRemoteIDLimit {<count>,<threshold>,<radius-override>}
sessions inner-vlan limit {<count>} [threshold {<threshold>}] set Sessions.InnerVLANLimit {<count>,<threshold>}
sessions mac throttle {<request-count> <request-period> <blocking-period>} set Sessions.MacThrottle {<request-count>,<request-period>,<blocking-period>}
sessions mac access-interface throttle {<request-count> <request-period> <blocking-period>} set Sessions.MacAccessInterfaceThrottle {<request-count>,<request-period>,<blocking-period>}
sessions mac-iwf access-interface throttle {<request-count> <request-period> <blocking-period>} set Sessions.MacIWFAccessInterfaceThrottle {<request-count>,<request-period>,<blocking-period>}
sessions circuit-id throttle {<request-count> <request-period> <blocking-period>} set Sessions.CircuitIDThrottle {<request-count>,<request-period>,<blocking-period>}
sessions remote-id throttle {<request-count> <request-period> <blocking-period>} set Sessions.RemoteIDThrottle {<request-count>,<request-period>,<blocking-period>}
sessions circuit-id-and-remote-id throttle {<request-count> <request-period> <blocking-period>} set Sessions.CircuitIDAndRemoteIDThrottle {<request-count>,<request-period>,<blocking-period>}
sessions inner-vlan throttle {<request-count> <request-period> <blocking-period>} set Sessions.InnerVLANThrottle {<request-count>,<request-period>,<blocking-period>}
control-packets priority {<cos>} set ControlPackets.Priority {<cos>}
invalid-session-id drop set InvalidSessionID {DROP}
invalid-session-id log set InvalidSessionID {LOG}

Subscriber Database XML Support

The support for XML is available for subscriber database that retrieves the subscriber association and session information and allows the management clients to get subscriber session state, subscriber session information based on unique subscriber label, subscriber association information based on unique subscriber label or interface name or dynamic template name or type. The mapping between CLI and XML entries for the subscriber database commands are as follows:

CLI XML
show subscriber database association br location <>

Subscriber.Database.NodeTable.Node.Association.LabelTable.Label{Naming SubscriberLabel}

show subscriber database association subscriber-label <> br location<>

Subscriber.Database.NodeTable.Node.Association.LabelTable.Label{Naming SubscriberLabel}
show subscriber database association location <> Subscriber.Database.NodeTable.Node.Association(SubscriberDatabaseLabelDetailFilter)
show subscriber database association interface-name <> br location<> Subscriber.Database.NodeTable.Node.Association(SubscriberDatabaseInterfaceBriefFilter){Naming InterfaceName}
show subscriber database association interface-name <> location<> Subscriber.Database.NodeTable.Node.Association(SubscriberDatabaseInterfaceFilter){Naming InterfaceName}
show subscriber database association type < ipsubscriber |ppp |service-profile |subscriber-service> br location <> Subscriber.Database.NodeTable.Node.Association(SubscriberDatabaseTemplateTypeBriefFilter){Naming TemplateType}
show subscriber database association type < ipsubscriber |ppp |service-profile |subscriber-service> location <> Subscriber.Database.NodeTable.Node.Association(SubscriberDatabaseTemplateTypeFilter){Naming TemplateType}
show subscriber database session state <all| cfgapply |cfgdone |cfggen |cfgunapply |destroying |error |fatgen |init |sync> Subscriber.Database.NodeTable.Node.Session(SubscriberDatabaseSessionStateFilter){Naming Session-State}
show subscriber database session subscriber-label <> location <> Subscriber.Database.NodeTable.Node.Session.LabelTable.Label{Naming SubscriberLabel}
association subscriber-label <0x0-0xffffffff> brief location R/S/M Subscriber.Database.NodeTable.Node.Association.LabelTable.Label
association subscriber-label <0x0-0xffffffff> brief Subscriber.Database.NodeTable.Node.Association.LabelTable.Label
association subscriber-label <0x0-0xffffffff> location R/S/M Subscriber.Database.NodeTable.Node.Association.LabelTable.Label
association subscriber-label <0x0-0xffffffff> Subscriber.Database.NodeTable.Node.Association.LabelTable.Label
association interface-name <ifname> brief location R/S/M Subscriber.Database.NodeTable.Node.Association[SubscriberInterfaceBriefFilter(Naming InterfaceName]
association interface-name <ifname> brief Subscriber.Database.NodeTable.Node.Association[SubscriberInterfaceBriefFilter(Naming InterfaceName]
association interface-name <ifname> location R/S/M Subscriber.Database.NodeTable.Node.Association[SubscriberInterfaceFilter(Naming InterfaceName]
association interface-name <ifname> Subscriber.Database.NodeTable.Node.Association[SubscriberInterfaceFilter(Naming InterfaceName]
association type ppp brief location R/S/M Subscriber.Database.NodeTable.Node.Association[SubscriberTemplateType(Naming TemplateType]
association type ppp brief Subscriber.Database.NodeTable.Node.Association[SubscriberTemplateType(Naming TemplateType]
association type ppp location R/S/M Subscriber.Database.NodeTable.Node.Association[SubscriberTemplateType(Naming TemplateType]
association type ppp Subscriber.Database.NodeTable.Node.Association[SubscriberTemplateType(Naming TemplateType]
association type ipsubscriber brief location R/S/M Subscriber.Database.NodeTable.Node.Association[SubscriberTemplateType(Naming TemplateType]
association type ipsubscriber brief Subscriber.Database.NodeTable.Node.Association[SubscriberTemplateType(Naming TemplateType]
association type ipsubscriber location R/S/M Subscriber.Database.NodeTable.Node.Association[SubscriberTemplateType(Naming TemplateType]
association type ipsubscriber Subscriber.Database.NodeTable.Node.Association[SubscriberTemplateType(Naming TemplateType]
association type subscriber-service brief location R/S/M Subscriber.Database.NodeTable.Node.Association[SubscriberTemplateType(Naming TemplateType]
association type subscriber-service brief Subscriber.Database.NodeTable.Node.Association[SubscriberTemplateType(Naming TemplateType]
association type subscriber-service location R/S/M Subscriber.Database.NodeTable.Node.Association[SubscriberTemplateType(Naming TemplateType]
association type subscriber-service Subscriber.Database.NodeTable.Node.Association[SubscriberTemplateType(Naming TemplateType]
association type service-profile brief location R/S/M Subscriber.Database.NodeTable.Node.Association[SubscriberTemplateType(Naming TemplateType]
association type service-profile brief Subscriber.Database.NodeTable.Node.Association[SubscriberTemplateType(Naming TemplateType]
association type service-profile location R/S/M Subscriber.Database.NodeTable.Node.Association[SubscriberTemplateType(Naming TemplateType]
association type service-profile Subscriber.Database.NodeTable.Node.Association[SubscriberTemplateType(Naming TemplateType]
association type user-profile brief location R/S/M Subscriber.Database.NodeTable.Node.Association[SubscriberTemplateType(Naming TemplateType]
association type user-profile brief Subscriber.Database.NodeTable.Node.Association[SubscriberTemplateType(Naming TemplateType]
association type user-profile location R/S/M Subscriber.Database.NodeTable.Node.Association[SubscriberTemplateType(Naming TemplateType]
association type user-profile Subscriber.Database.NodeTable.Node.Association[SubscriberTemplateType(Naming TemplateType]
association brief location R/S/M Subscriber.Database.NodeTable.Node.Association.LabelTable.Label
association brief Subscriber.Database.NodeTable.Node.Association.LabelTable.Label
association location R/S/M Subscriber.Database.NodeTable.Node.Association.LabelTable.Label
association Subscriber.Database.NodeTable.Node.Association.LabelTable.Label
session subscriber-label <0x0-0xffffffff> location R/S/M Subscriber.Database.NodeTable.Node.Session.LabelTable.Label
session subscriber-label <0x0-0xffffffff> Subscriber.Database.NodeTable.Node.Session.LabelTable.Label
session state init location R/S/M Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]
session state init Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]
session state destroying location R/S/M Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]
session state destroying Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]
session state cfggen location R/S/M Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]
session state cfggen Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]
session state fatgen location R/S/M Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]
session state fatgen Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]
session state cfgapply location R/S/M Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]
session state cfgapply Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]
session state cfgdone location R/S/M Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]
session state cfgdone Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]
session state cfgunapply location R/S/M Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]
session state cfgunapply Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]
session state cfgerror location R/S/M Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]
session state cfgerror Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]
session state error location R/S/M Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]
session state error Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]
session state sync location R/S/M Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]
session state sync Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]
session state all location R/S/M Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]
session state all Subscriber.Database.NodeTable.Node.Session[SubscriberSessionStateFilter(Naming State]