Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 5.1.x
Tech-Support Commands
Downloads: This chapterpdf (PDF - 2.25MB) The complete bookPDF (PDF - 3.49MB) | Feedback

Tech-Support Commands

Contents

Tech-Support Commands

This module describes commands used for displaying the output of show commands using Cisco IOS XR software software. The command output varies depending on the router platform and configuration.

The show tech-support commands all display common data from commands such as show version . Each show tech-support command also generates and gathers relevant data for a specific area. This data includes trace output to collect debugging information available in the specific area of interest.

show system verify

To verify the system parameters, use the show system verify command in EXEC mode.

show system verify [ start | restart [detail] ]

Syntax Description

start

(Optional) Performs an initial analysis of the system and stores the information for subsequent verification.

report

(Optional) Generates a report for the system verification process.

detail

(Optional) Generates a detailed report for the system verification process.

Command Default

No default behavior or values

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

You must run the show system verify command with the start keyword before generating any reports.

Task ID

Task ID

Operations

system

read

Examples

The following example shows how to prepare for system verification:

RP/0/RSP0/CPU0:router# show system verify start

Storing initial router status ...
done.

The following example shows output from running the show system verify command:

RP/0/RSP0/CPU0:router#  show system verify 

Getting current router status ... 
System Verification Report
==========================
- Verifying Memory Usage
- Verified Memory Usage                                 : [OK]     
- Verifying CPU Usage
- Verified CPU Usage                                    : [OK]     

- Verifying Blocked Processes
- Verified Blocked Processes                            : [OK]     
- Verifying Aborted Processes
- Verified Aborted Processes                            : [OK]     
- Verifying Crashed Processes
- Verified Crashed Processes                            : [OK]     

- Verifying LC Status
- Verified LC Status                                    : [OK]     
- Verifying QNET Status
Unable to get current LC status info
- Verified QNET Status                                  : [FAIL]   

- Verifying GSP Fabric Status
- Verified GSP Fabric Status                            : [OK]     
- Verifying GSP Ethernet Status
  gsp WARNING messages for router 
  Current set of gsp ping nodes does not match initial set of nodes
- Verified GSP Ethernet Status                          : [WARNING]

- Verifying POS interface Status
- Verified POS interface Status                         : [OK]     
- Verifying TenGigE interface Status
- Verified TenGigE interface Status                     : [OK]     

- Verifying TCP statistics
- Verified TCP statistics                               : [OK]     
- Verifying UDP statistics
  tcp_udp_raw WARNING messages for router 
  UDP Packets sent has not increased during this period.
- Verified UDP statistics                               : [WARNING]
- Verifying RAW statistics
- Verified RAW statistics                               : [OK]     

- Verifying RIB Status
- Verified RIB Status                                   : [OK]     
- Verifying CEF Status
- Verified CEF Status                                   : [OK]     
- Verifying CEF Consistency Status
- Verified CEF Consistency Status                       : [OK]     
- Verifying BGP Status
- Verified BGP Status                                   : [OK]     
- Verifying ISIS Status
- Verified ISIS Status                                  : [OK]     
- Verifying OSPF Status
- Verified OSPF Status                                  : [OK]     

- Verifying Syslog Messages
- Verified Syslog Messages                              : [OK]     

System may not be stable. Please look into WARNING messages.

This table describes the significant fields shown in the display.

Table 1 show system verify Field Descriptions

Field

Description

Type

Type of memory

Initial

Initial usage determined when the command is run with the start keyword

Current

Current usage

Application

Memory used for applications

Available

Memory available for applications

Physical

Total physical memory

nodes

Devices in the system such as linecards, route processors, fabric cards, and so forth

blocked processes

Number of blocked processes on the router

aborted processes

Number of aborted processes on the router

crashed processes

Number of crashed processes on the router

LC Status on Router

Linecard status

QNET Status on router

Internal communications protocol status

GSP Fabric Status on router

Internal communications protocol status

GSP Ethernet Status on router

Internal communications protocol status

Interface Status on router

Packet-over-SONET status

Protocol

Protocol on the interface

IP address

IP Address of the interface

Encapsulation

Encapsulation method used on the interface

MTU

Maximum Transmission Units for the interface

Keep alive

Keep alives messages on the interface

Packets Input

Total number packets input to the interface

Bytes Input

Total number of bytes input to the interface

Packets Output

Total number of packets output by the interface

Byte Output

Total number of bytes output by the interface

TenGigE interface Status on router

10 Gigabit Ethernet interface status

TCP statistics on router

Transmission Control Protocol statistics

UDP statistics on router

User Datagram Protocol statistics

RAW statistics on router

RAW statistics

PCBs

Protocol Control Blocks

RIB Status on router

Routing Information Base status

CEF Status on node......

Cisco Express Forwarding status

CEF Consistency Status on router

Cisco Express Forwarding consistency status

BGP Status on router

Border Gateway Protocol status

neighbors

Number of BGP neighbors

established

Number of BGP neighbors in ‘established’ state

ISIS Status on router

Intermediate System-to-Intermediate System status

up

Number of ISIS links up

failed

Number of failed ISIS links

init

Initial number of ISIS links

OSPF Status on router

Open Shortest Path First status

interfaces

Number of interfaces configured in OSPF

interfaces_up

Number of interfaces configured in OSPF that are in the ‘up’ state

virtual_int

Number of virtual interfaces

neighbors

Number of OSPF neighbors configured

neighbors_adj

Number of OSPF configured neighbors that are ‘adjacent’

Syslog Messages on router

Number of syslog messages

show tech-support

To automatically run show commands that display system information, use the show tech-support command in the EXEC and administration EXEC modes .

show tech-support [password] { terminal [page] | file send-to [background] [ compressed | uncompressed ] } [ location node-id ]

Syntax Description

password

(Optional) Leaves passwords and other security information in the output. If not used, passwords and other security-sensitive information in the output are replaced with the label "<removed>".

terminal

Displays command output on the terminal.

page

(Optional) Displays the command output on a single page at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl-C keys to stop the command output.

file

Specifies that the command output is saved to a specified file.

send-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • disk0: filename
  • disk1: filename
  • flash: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • nvram: filename
  • rcp: filename
  • slot0: filename
  • slot1: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

location node-id

(Optional) Specifies a node. The node-id argument is entered in the rack/slot/module notation.

Command Default

The command output is not compressed.

Passwords and other security information are not displayed.

Command Modes

Administration EXEC

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.



Note


This command is not required during normal use of the router.


The following show commands run automatically when you run the show tech-support command:

  • show running-config
  • show version
  • show interfaces
  • show arm summary
  • show arm conflicts
  • show install
  • show filesystem
  • dir location all: pwd = disk0:
  • dir location all: pwd = bootflash:
  • run top_procs
  • show processes aborts location all
  • show processes blocked location all
  • show placement nodes all
  • show placement policy program all
  • show memory summary location all
  • show lpts ifib brief
  • show im database all
  • run gsp_show
  • show context all location all
  • show redundancy
  • show dsc all
  • show lr all
  • show ipv4 traffic
  • show ipv6 traffic
  • show logging
  • show inventory
  • show packet-memory
  • show packet-memory corrupt
  • show packet-memory failures
  • show platform
  • show led
  • show buffer reserved-memory
  • show controllers fabricq eio links all
  • show controllers pse eio links all
  • show controllers plim asic pla eio links all
  • show controllers fia eio links all
  • show controllers cpuctrl summary
  • admin show controllers fabric plane all
  • admin show controllers fabric plane all stat
  • admin show controllers fabric sfe fabricq all detail
  • admin show controllers fabric sfe ingressq all detail
  • admin show controllers fabric sfe s1 all detail
  • admin show controllers fabric sfe s2 all detail
  • admin show controllers fabric sfe s3 all detail
  • show environment all

See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

basic-services or cisco-support

read

show tech-support aps

To automatically run show commands that display debugging information related to automatic protection switching (APS), use the show tech-support aps command in the EXEC mode. This command collects APS traces and sonet local traces across all locations and also show controller and show aps commands for all ports and groups.

show tech-support aps file send-to [ group | show-only ] [ location node-id ]

Syntax Description

file

Specifies that the command output is saved to a specified file.

send-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • disk0: filename
  • disk1: filename
  • flash: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • nvram: filename
  • rcp: filename
  • slot0: filename
  • slot1: filename
  • tftp: filename

group

(Optional) Displays the show group commands with no trace for APS debugging.

show-only

(Optional) Displays the show commands with no trace for APS debugging.

terminal

(Optional) Specifies that the command output is displayed on the terminal.

location

(Optional) Specifies a node.

node-id

(Optional) Node ID. The node-id argument is entered in the rack/slot/module notation.

Command Default

The command output is not compressed.

Command Modes

EXEC

Command History

Release

Modification

Release 3.9.0

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support aps command to run show commands that display APS debugging information. This command generates information that can be useful for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.


Note


This command is not required during normal use of the router.


Task ID

Task ID

Operations

basic-services

read

Examples

The following example shows a truncated output of the show tech-support aps command:

RP/0/RSP0/CPU0:router# show tech-support aps show-only terminal

-------------------------------------------------------------------------------

                               show tech-support aps

-------------------------------------------------------------------------------


---------------------------------- show aps -----------------------------------

no aps group found



------------------------------- show aps agents -------------------------------


APS shows Agent: sysdb_datalist failed: ('sysdb' detected the 'warning' conditi)


--------------------------- show controller sonet * ---------------------------


Port SONET0/6/0/0:

Status: Up

Loopback: None

SECTION
  LOF = 0          LOS    = 1                            BIP(B1) = 0
LINE
  AIS = 0          RDI    = 1          FEBE = 0          BIP(B2) = 0
PATH
  AIS = 0          RDI    = 1          FEBE = 0          BIP(B3) = 0
  LOP = 0          NEWPTR = 0          PSE  = 0          NSE     = 0
  PLM = 0          TIM    = 0          UNEQ = 0         

Line delays trigger:      0 ms clear:  10000 ms
Path delays trigger:      0 ms,      0 ms (configured), clear:  10000 ms
Last clearing of "show controllers SONET" counters never

Detected Alarms: None
Asserted Alarms: None
Mask for Detected->Asserted: None
Detected Alerts: None
Reported Alerts: None
Mask for Detected->Reported: None
Alarm reporting enabled for: SLOS SLOF SF_BER PLOP 
Alert reporting enabled for: B1-TCA B2-TCA B3-TCA 

Framing: SONET
SPE Scrambling: Enabled
C2 State: Stable   C2_rx = 0x16 (22)   C2_tx = 0x16 (22) / Scrambling Derived
S1S0(tx): 0x0  S1S0(rx): 0x0 / Framing Derived

PATH TRACE BUFFER : STABLE
  Remote hostname : P11_CRS-4               
  Remote interface: POS0/2/0/0    
  Remote IP addr  : 10.111.4.11     

APS
No APS Group Configured
  Rx(K1/K2) : 0x00/0x00 
  Tx(K1/K2) : 0x00/0x00 
  Remote Rx(K1/K2): 01/0   Remote Tx(K1/K2): 01/0 


BER thresholds:  SF = 10e-3  SD = 10e-6
TCA thresholds:  B1 = 10e-6  B2 = 10e-6  B3 = 10e-6

  Optics type: OC3 SR-1/STM1 MM
  Clock source: internal (actual) internal (configured)
  Rx S1: 0xf  Tx S1: 0xf

Optical Power Monitoring (accuracy: +/- 1dB)
  Rx power = 0.0160 mW, -18.0 dBm
  Tx power = 0.0000 mW, -inf dBm
  Tx laser current bias = 0.0 mA

Port SONET0/6/0/1:

Status: Up

Loopback: None

SECTION
  LOF = 0          LOS    = 1                            BIP(B1) = 0
LINE
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B2) = 0
PATH
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B3) = 0
  LOP = 0          NEWPTR = 0          PSE  = 0          NSE     = 0
  PLM = 0          TIM    = 0          UNEQ = 0         

Line delays trigger:      0 ms clear:  10000 ms
Path delays trigger:      0 ms,      0 ms (configured), clear:  10000 ms
Last clearing of "show controllers SONET" counters never

Detected Alarms: None
Asserted Alarms: None
Mask for Detected->Asserted: None
Detected Alerts: None
Reported Alerts: None
Mask for Detected->Reported: None
Alarm reporting enabled for: SLOS SLOF SF_BER PLOP 
Alert reporting enabled for: B1-TCA B2-TCA B3-TCA 

Framing: SONET
SPE Scrambling: Enabled
C2 State: Stable   C2_rx = 0x16 (22)   C2_tx = 0x16 (22) / Scrambling Derived
S1S0(tx): 0x0  S1S0(rx): 0x0 / Framing Derived

PATH TRACE BUFFER : STABLE
  Remote hostname : P2_CRS-8                
  Remote interface: POS0/6/0/1    
  Remote IP addr  : 10.12.8.2       

APS
No APS Group Configured
  Protect  Channel 0   DISABLED
  Rx(K1/K2) : 0x00/0x00 
  Tx(K1/K2) : 0x00/0x00 
  Remote Rx(K1/K2): 01/0   Remote Tx(K1/K2): 01/0 


BER thresholds:  SF = 10e-3  SD = 10e-6
TCA thresholds:  B1 = 10e-6  B2 = 10e-6  B3 = 10e-6

  Optics type: OC3 SR-1/STM1 MM
  Clock source: internal (actual) internal (configured)
  Rx S1: 0xf  Tx S1: 0xf

Optical Power Monitoring (accuracy: +/- 1dB)
  Rx power = 0.0223 mW, -16.5 dBm
  Tx power = 0.0000 mW, -inf dBm
  Tx laser current bias = 0.0 mA

Port SONET0/6/0/2:

Status: Down

Loopback: None

SECTION
  LOF = 0          LOS    = 1                            BIP(B1) = 0
LINE
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B2) = 0
PATH
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B3) = 0
  LOP = 0          NEWPTR = 0          PSE  = 0          NSE     = 0
  PLM = 0          TIM    = 0          UNEQ = 0         

Line delays trigger:      0 ms clear:  10000 ms
Path delays trigger:      0 ms,      0 ms (configured), clear:  10000 ms
Last clearing of "show controllers SONET" counters never

Detected Alarms: SLOS 
Asserted Alarms: SLOS 
Mask for Detected->Asserted: SLOF LAIS SF_BER SD_BER LRDI PLOP PAIS PRDI PUNEQ  
Detected Alerts: None
Reported Alerts: None
Mask for Detected->Reported: B1-TCA B2-TCA B3-TCA 
Alarm reporting enabled for: SLOS SLOF SF_BER PLOP 
Alert reporting enabled for: B1-TCA B2-TCA B3-TCA 

Framing: SONET
SPE Scrambling: Enabled
C2 State: Stable   C2_rx = 0x6D (109)   C2_tx = 0x16 (22) / Scrambling Derived
S1S0(tx): 0x0  S1S0(rx): 0x2 / Framing Derived

PATH TRACE BUFFER : UNSTABLE
  Remote hostname :                         
  Remote interface:               
  Remote IP addr  :                 

APS
No APS Group Configured
  Protect  Channel 0   DISABLED
  Rx(K1/K2) : 0x00/0x00 
  Tx(K1/K2) : 0x00/0x00 
  Remote Rx(K1/K2):  1/    Remote Tx(K1/K2):  1/  


BER thresholds:  SF = 10e-3  SD = 10e-6
TCA thresholds:  B1 = 10e-6  B2 = 10e-6  B3 = 10e-6

  Optics type: None
  Clock source: internal (actual) line (configured)
  Rx S1: 0xe  Tx S1: 0xf

Optical Power Monitoring (accuracy: +/- 1dB)
  Not Supported

Port SONET0/6/0/3:

Status: Up

Loopback: None

SECTION
  LOF = 0          LOS    = 0                            BIP(B1) = 0
LINE
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B2) = 0
PATH
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B3) = 0
  LOP = 0          NEWPTR = 0          PSE  = 0          NSE     = 0
  PLM = 0          TIM    = 0          UNEQ = 0         

Line delays trigger:      0 ms clear:  10000 ms
Path delays trigger:      0 ms,      0 ms (configured), clear:  10000 ms
Last clearing of "show controllers SONET" counters never

Detected Alarms: None
Asserted Alarms: None
Mask for Detected->Asserted: None
Detected Alerts: None
Reported Alerts: None
Mask for Detected->Reported: None
Alarm reporting enabled for: SLOS SLOF SF_BER PLOP 
Alert reporting enabled for: B1-TCA B2-TCA B3-TCA 

Framing: SONET
SPE Scrambling: Enabled
C2 State: Stable   C2_rx = 0x16 (22)   C2_tx = 0x16 (22) / Scrambling Derived
S1S0(tx): 0x0  S1S0(rx): 0x0 / Framing Derived

PATH TRACE BUFFER : STABLE
  Remote hostname : PE21_C12406             
  Remote interface: POS0/2/0/3    
  Remote IP addr  : 10.121.4.21     

APS
No APS Group Configured
  Protect  Channel 0   DISABLED
  Rx(K1/K2) : 0x00/0x00 
  Tx(K1/K2) : 0x00/0x00 
  Remote Rx(K1/K2): 01/0   Remote Tx(K1/K2): 01/0 


BER thresholds:  SF = 10e-3  SD = 10e-6
TCA thresholds:  B1 = 10e-6  B2 = 10e-6  B3 = 10e-6

  Optics type: OC3 SR-1/STM1 MM
  Clock source: internal (actual) internal (configured)
  Rx S1: 0xf  Tx S1: 0xf

Optical Power Monitoring (accuracy: +/- 1dB)
  Rx power = 0.0206 mW, -16.9 dBm
  Tx power = 0.0000 mW, -inf dBm
  Tx laser current bias = 0.0 mA

Port SONET0/6/4/0:

Status: Down

Loopback: None

SECTION
  LOF = 0          LOS    = 1                            BIP(B1) = 0
LINE
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B2) = 0
PATH
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B3) = 0
  LOP = 0          NEWPTR = 0          PSE  = 0          NSE     = 0
  PLM = 0          TIM    = 0          UNEQ = 0         

Line delays trigger:      0 ms clear:  10000 ms
Path delays trigger:      0 ms,      0 ms (configured), clear:  10000 ms
Last clearing of "show controllers SONET" counters never

Detected Alarms: SLOS 
Asserted Alarms: SLOS 
Mask for Detected->Asserted: SLOF LAIS SF_BER SD_BER LRDI PLOP PAIS PRDI PUNEQ  
Detected Alerts: None
Reported Alerts: None
Mask for Detected->Reported: B1-TCA B2-TCA B3-TCA 
Alarm reporting enabled for: SLOS SLOF SF_BER PLOP 
Alert reporting enabled for: B1-TCA B2-TCA B3-TCA 

Framing: SONET
SPE Scrambling: Enabled
C2 State: Stable   C2_rx = 0xFF (255)   C2_tx = 0x16 (22) / Scrambling Derived
S1S0(tx): 0x0  S1S0(rx): 0x0 / Framing Derived

PATH TRACE BUFFER : UNSTABLE
  Remote hostname :                         
  Remote interface:               
  Remote IP addr  :                 

APS
No APS Group Configured
  Rx(K1/K2) : 0x00/0x00 
  Tx(K1/K2) : 0x00/0x00 
  Remote Rx(K1/K2):  1/    Remote Tx(K1/K2):  1/  


BER thresholds:  SF = 10e-3  SD = 10e-6
TCA thresholds:  B1 = 10e-6  B2 = 10e-6  B3 = 10e-6

  Optics type: None
  Clock source: internal (actual) line (configured)
  Rx S1: 0x0  Tx S1: 0xf

Optical Power Monitoring (accuracy: +/- 1dB)
  Not Supported

Port SONET0/6/4/1:

Status: Down

Loopback: None

SECTION
  LOF = 0          LOS    = 1                            BIP(B1) = 0
LINE
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B2) = 0
PATH
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B3) = 0
  LOP = 0          NEWPTR = 0          PSE  = 0          NSE     = 0
  PLM = 0          TIM    = 0          UNEQ = 0         

Line delays trigger:      0 ms clear:  10000 ms
Path delays trigger:      0 ms,      0 ms (configured), clear:  10000 ms
Last clearing of "show controllers SONET" counters never

Detected Alarms: SLOS 
Asserted Alarms: SLOS 
Mask for Detected->Asserted: SLOF LAIS SF_BER SD_BER LRDI PLOP PAIS PRDI PUNEQ  
Detected Alerts: None
Reported Alerts: None
Mask for Detected->Reported: B1-TCA B2-TCA B3-TCA 
Alarm reporting enabled for: SLOS SLOF SF_BER PLOP 
Alert reporting enabled for: B1-TCA B2-TCA B3-TCA 

Framing: SONET
SPE Scrambling: Enabled
C2 State: Stable   C2_rx = 0xFF (255)   C2_tx = 0x16 (22) / Scrambling Derived
S1S0(tx): 0x0  S1S0(rx): 0x0 / Framing Derived

PATH TRACE BUFFER : UNSTABLE
  Remote hostname :                         
  Remote interface:               
  Remote IP addr  :                 

APS
No APS Group Configured
  Protect  Channel 0   DISABLED
  Rx(K1/K2) : 0x00/0x00 
  Tx(K1/K2) : 0x00/0x00 
  Remote Rx(K1/K2):  1/    Remote Tx(K1/K2):  1/  


BER thresholds:  SF = 10e-3  SD = 10e-6
TCA thresholds:  B1 = 10e-6  B2 = 10e-6  B3 = 10e-6

  Optics type: None
  Clock source: internal (actual) line (configured)
  Rx S1: 0x0  Tx S1: 0xf

Optical Power Monitoring (accuracy: +/- 1dB)
  Not Supported

Port SONET0/6/4/2:

Status: Down

Loopback: None

SECTION
  LOF = 0          LOS    = 1                            BIP(B1) = 0
LINE
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B2) = 0
PATH
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B3) = 0
  LOP = 0          NEWPTR = 0          PSE  = 0          NSE     = 0
  PLM = 0          TIM    = 0          UNEQ = 0         

Line delays trigger:      0 ms clear:  10000 ms
Path delays trigger:      0 ms,      0 ms (configured), clear:  10000 ms
Last clearing of "show controllers SONET" counters never

Detected Alarms: SLOS 
Asserted Alarms: SLOS 
Mask for Detected->Asserted: SLOF LAIS SF_BER SD_BER LRDI PLOP PAIS PRDI PUNEQ  
Detected Alerts: None
Reported Alerts: None
Mask for Detected->Reported: B1-TCA B2-TCA B3-TCA 
Alarm reporting enabled for: SLOS SLOF SF_BER PLOP 
Alert reporting enabled for: B1-TCA B2-TCA B3-TCA 

Framing: SONET
SPE Scrambling: Enabled
C2 State: Stable   C2_rx = 0xEF (239)   C2_tx = 0x16 (22) / Scrambling Derived
S1S0(tx): 0x0  S1S0(rx): 0x0 / Framing Derived

PATH TRACE BUFFER : UNSTABLE
  Remote hostname :                         
  Remote interface:               
  Remote IP addr  :                 

APS
No APS Group Configured
  Protect  Channel 0   DISABLED
  Rx(K1/K2) : 0x00/0x00 
  Tx(K1/K2) : 0x00/0x00 
  Remote Rx(K1/K2):  1/    Remote Tx(K1/K2):  1/  


BER thresholds:  SF = 10e-3  SD = 10e-6
TCA thresholds:  B1 = 10e-6  B2 = 10e-6  B3 = 10e-6

  Optics type: None
  Clock source: internal (actual) line (configured)
  Rx S1: 0x0  Tx S1: 0xf

Optical Power Monitoring (accuracy: +/- 1dB)
  Not Supported

Port SONET0/6/4/3:

Status: Down

Loopback: None

SECTION
  LOF = 0          LOS    = 1                            BIP(B1) = 0
LINE
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B2) = 0
PATH
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B3) = 0
  LOP = 0          NEWPTR = 0          PSE  = 0          NSE     = 0
  PLM = 0          TIM    = 0          UNEQ = 0         

Line delays trigger:      0 ms clear:  10000 ms
Path delays trigger:      0 ms,      0 ms (configured), clear:  10000 ms
Last clearing of "show controllers SONET" counters never

Detected Alarms: SLOS 
Asserted Alarms: SLOS 
Mask for Detected->Asserted: SLOF LAIS SF_BER SD_BER LRDI PLOP PAIS PRDI PUNEQ  
Detected Alerts: None
Reported Alerts: None
Mask for Detected->Reported: B1-TCA B2-TCA B3-TCA 
Alarm reporting enabled for: SLOS SLOF SF_BER PLOP 
Alert reporting enabled for: B1-TCA B2-TCA B3-TCA 

Framing: SONET
SPE Scrambling: Enabled
C2 State: Stable   C2_rx = 0xFF (255)   C2_tx = 0x16 (22) / Scrambling Derived
S1S0(tx): 0x0  S1S0(rx): 0x0 / Framing Derived

PATH TRACE BUFFER : UNSTABLE
  Remote hostname :                         
  Remote interface:               
  Remote IP addr  :                 

APS
No APS Group Configured
  Protect  Channel 0   DISABLED
  Rx(K1/K2) : 0x00/0x00 
  Tx(K1/K2) : 0x00/0x00 
  Remote Rx(K1/K2):  1/    Remote Tx(K1/K2):  1/  


BER thresholds:  SF = 10e-3  SD = 10e-6
TCA thresholds:  B1 = 10e-6  B2 = 10e-6  B3 = 10e-6

  Optics type: None
  Clock source: internal (actual) line (configured)
  Rx S1: 0x0  Tx S1: 0xf

Optical Power Monitoring (accuracy: +/- 1dB)
  Not Supported

Port SONET0/6/4/4:

Status: Up

Loopback: None

SECTION
  LOF = 0          LOS    = 0                            BIP(B1) = 0
LINE
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B2) = 0
PATH
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B3) = 0
  LOP = 0          NEWPTR = 0          PSE  = 0          NSE     = 0
  PLM = 0          TIM    = 0          UNEQ = 0         

Line delays trigger:      0 ms clear:  10000 ms
Path delays trigger:      0 ms,      0 ms (configured), clear:  10000 ms
Last clearing of "show controllers SONET" counters never

Detected Alarms: None
Asserted Alarms: None
Mask for Detected->Asserted: None
Detected Alerts: None
Reported Alerts: None
Mask for Detected->Reported: None
Alarm reporting enabled for: SLOS SLOF SF_BER PLOP 
Alert reporting enabled for: B1-TCA B2-TCA B3-TCA 

Framing: SONET
SPE Scrambling: Enabled
C2 State: Stable   C2_rx = 0x16 (22)   C2_tx = 0x16 (22) / Scrambling Derived
S1S0(tx): 0x0  S1S0(rx): 0x0 / Framing Derived

PATH TRACE BUFFER : STABLE
  Remote hostname : P4_C12810               
  Remote interface: POS0/3        
  Remote IP addr  : 10.14.4.4       

APS
No APS Group Configured
  Protect  Channel 0   DISABLED
  Rx(K1/K2) : 0x00/0x00 
  Tx(K1/K2) : 0x00/0x00 
  Remote Rx(K1/K2): F1/F   Remote Tx(K1/K2): 00/0 


BER thresholds:  SF = 10e-3  SD = 10e-6
TCA thresholds:  B1 = 10e-6  B2 = 10e-6  B3 = 10e-6

  Optics type: OC12 SR-1/STM4 MM
  Clock source: internal (actual) internal (configured)
  Rx S1: 0xf  Tx S1: 0xf

Optical Power Monitoring (accuracy: +/- 1dB)
  Rx power = 0.0184 mW, -17.4 dBm
  Tx power = 0.0000 mW, -inf dBm
  Tx laser current bias = 0.0 mA

Port SONET0/6/4/5:

Status: Up

Loopback: None

SECTION
  LOF = 0          LOS    = 1                            BIP(B1) = 0
LINE
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B2) = 0
PATH
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B3) = 0
  LOP = 0          NEWPTR = 0          PSE  = 0          NSE     = 0
  PLM = 0          TIM    = 0          UNEQ = 0         

Line delays trigger:      0 ms clear:  10000 ms
Path delays trigger:      0 ms,      0 ms (configured), clear:  10000 ms
Last clearing of "show controllers SONET" counters never

Detected Alarms: None
Asserted Alarms: None
Mask for Detected->Asserted: None
Detected Alerts: None
Reported Alerts: None
Mask for Detected->Reported: None
Alarm reporting enabled for: SLOS SLOF SF_BER PLOP 
Alert reporting enabled for: B1-TCA B2-TCA B3-TCA 

Framing: SONET
SPE Scrambling: Enabled
C2 State: Stable   C2_rx = 0x16 (22)   C2_tx = 0x16 (22) / Scrambling Derived
S1S0(tx): 0x0  S1S0(rx): 0x0 / Framing Derived

PATH TRACE BUFFER : STABLE
  Remote hostname : P2_CRS-8                
  Remote interface: POS0/6/4/5    
  Remote IP addr  : 10.12.4.2       

APS
No APS Group Configured
  Protect  Channel 0   DISABLED
  Rx(K1/K2) : 0x00/0x00 
  Tx(K1/K2) : 0x00/0x00 
  Remote Rx(K1/K2): 01/0   Remote Tx(K1/K2): 01/0 


BER thresholds:  SF = 10e-3  SD = 10e-6
TCA thresholds:  B1 = 10e-6  B2 = 10e-6  B3 = 10e-6

  Optics type: OC12 SR-1/STM4 MM
  Clock source: internal (actual) internal (configured)
  Rx S1: 0xf  Tx S1: 0xf

Optical Power Monitoring (accuracy: +/- 1dB)
  Rx power = 0.0193 mW, -17.1 dBm
  Tx power = 0.0000 mW, -inf dBm
  Tx laser current bias = 0.0 mA

Port SONET0/6/4/6:

Status: Up

Loopback: None

SECTION
  LOF = 1          LOS    = 0                            BIP(B1) = 0
LINE
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B2) = 0
PATH
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B3) = 0
  LOP = 0          NEWPTR = 0          PSE  = 0          NSE     = 0
  PLM = 0          TIM    = 0          UNEQ = 0         

Line delays trigger:      0 ms clear:  10000 ms
Path delays trigger:      0 ms,      0 ms (configured), clear:  10000 ms
Last clearing of "show controllers SONET" counters never

Detected Alarms: None
Asserted Alarms: None
Mask for Detected->Asserted: None
Detected Alerts: None
Reported Alerts: None
Mask for Detected->Reported: None
Alarm reporting enabled for: SLOS SLOF SF_BER PLOP 
Alert reporting enabled for: B1-TCA B2-TCA B3-TCA 

Framing: SONET
SPE Scrambling: Enabled
C2 State: Stable   C2_rx = 0x16 (22)   C2_tx = 0x16 (22) / Scrambling Derived
S1S0(tx): 0x0  S1S0(rx): 0x0 / Framing Derived

PATH TRACE BUFFER : STABLE
  Remote hostname : P3_C12008               
  Remote interface: POS5/2        
  Remote IP addr  : 10.13.4.3       

APS
No APS Group Configured
  Protect  Channel 0   DISABLED
  Rx(K1/K2) : 0x00/0x00 
  Tx(K1/K2) : 0x00/0x00 
  Remote Rx(K1/K2): 00/0   Remote Tx(K1/K2): 00/0 


BER thresholds:  SF = 10e-3  SD = 10e-6
TCA thresholds:  B1 = 10e-6  B2 = 10e-6  B3 = 10e-6

  Optics type: OC12 SR-1/STM4 MM
  Clock source: internal (actual) internal (configured)
  Rx S1: 0xf  Tx S1: 0xf

Optical Power Monitoring (accuracy: +/- 1dB)
  Rx power = 0.0142 mW, -18.5 dBm
  Tx power = 0.0000 mW, -inf dBm
  Tx laser current bias = 0.0 mA

Port SONET0/6/4/7:

Status: Down

Loopback: None

SECTION
  LOF = 0          LOS    = 1                            BIP(B1) = 0
LINE
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B2) = 0
PATH
  AIS = 0          RDI    = 0          FEBE = 0          BIP(B3) = 0
		  LOP = 0          NEWPTR = 0          PSE  = 0          NSE     = 0
  PLM = 0          TIM    = 0          UNEQ = 0         

Line delays trigger:      0 ms clear:  10000 ms
Path delays trigger:      0 ms,      0 ms (configured), clear:  10000 ms
Last clearing of "show controllers SONET" counters never

Detected Alarms: SLOS 
Asserted Alarms: SLOS 
Mask for Detected->Asserted: SLOF LAIS SF_BER SD_BER LRDI PLOP PAIS PRDI PUNEQ  
Detected Alerts: None
Reported Alerts: None
Mask for Detected->Reported: B1-TCA B2-TCA B3-TCA 
Alarm reporting enabled for: SLOS SLOF SF_BER PLOP 
Alert reporting enabled for: B1-TCA B2-TCA B3-TCA 

Framing: SONET
SPE Scrambling: Enabled
C2 State: Stable   C2_rx = 0xF7 (247)   C2_tx = 0x16 (22) / Scrambling Derived
S1S0(tx): 0x0  S1S0(rx): 0x0 / Framing Derived

PATH TRACE BUFFER : UNSTABLE
  Remote hostname :                         
  Remote interface:               
  Remote IP addr  :                 

APS
No APS Group Configured
  Protect  Channel 0   DISABLED
  Rx(K1/K2) : 0x00/0x00 
  Tx(K1/K2) : 0x00/0x00 
  Remote Rx(K1/K2):  1/    Remote Tx(K1/K2):  1/  


BER thresholds:  SF = 10e-3  SD = 10e-6
TCA thresholds:  B1 = 10e-6  B2 = 10e-6  B3 = 10e-6

  Optics type: None
  Clock source: internal (actual) internal (configured)
  Rx S1: 0x0  Tx S1: 0xf

Optical Power Monitoring (accuracy: +/- 1dB)
  Not Supported

-------------------------------------------------------------------------------

                        show tech-support aps complete                         

-------------------------------------------------------------------------------

show tech-support bcdl

To automatically run show commands that display information specific to bulk content downloader (BCDL) debugging, use the show tech-support bcdl command in EXEC mode.

show tech-support bcdl [bcdl-group] { terminal [page] | file send-to [background] [ compressed | uncompressed ] }

Syntax Description

bcdl-group

(Optional) Name of the BCDL group.

terminal

Displays the command output on the terminal.

page

(Optional) Displays the command output on a single page at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl-C keys to stop the command output.

file

Specifies that the command output is saved to a specified file.

sent-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • disk0: filename
  • disk1: filename
  • flash: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • nvram: filename
  • rcp: filename
  • slot0: filename
  • slot1: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

Command Default

The command output is not compressed.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support bcdl command to run show commands that display information specific to BCDL debugging. The BCDL is used to pass routing information from the Routing Information Base (RIB) to the linecards for Forwarding Information Base (FIB) processing. BCDL also allows Multiprotocol Label Switching (MPLS) to send label information to the FIB and allows Local Packet Transport Services (LPTS) to send information to the linecard processes.


Note


This command is not required during normal use of the router.


The following show commands run automatically when you run the show tech-support bcdl command:

  • show bcdl
  • show bcdl consumers
  • show bcdl tables
  • show process bcdl_agent
  • show bcdl trace location all

See the Cisco IOS XR Software command references for information about these commands and descriptions of their command output. The Cisco IOS XR Software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

basic-services or cisco-support

read

sysmgr

read

show tech-support bundles

To automatically run show commands that display information specific to bundle debugging, use the show tech-support bundles command in EXEC mode.

show tech-support bundles [ interface type interface-path-id ] [ file sent-to ] [background] [ compressed | uncompressed ] [show-only] [trace-only] [ vrf vrf-name ] [ location node-id | all ]

Syntax Description

file

Specifies that the command output is saved to a specified file.

sent-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • compactflasha: filename
  • disk0: filename
  • disk0a: filename
  • disk1: filename
  • disk1a: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • harddiskb: filename
  • nvram: filename
  • rcp: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

interface

(Optional) Collects information about a specific interface.

type

Interface type. For more information, use the question mark (?) online help function.

interface-path-id

Physical interface or virtual interface.

Note   

Use the show interfaces command to see a list of all interfaces currently configured on the router.

For more information about the syntax for the router, use the question mark ( ? ) online help function.

show-only

(Optional) Collects only show command information.

terminal

Displays the command output on the terminal.

trace-only

(Optional) Collects only trace information.

vrf

(Optional) Specifies a VPN routing and forwarding (VRF) instance.

vrf-name

(Optional) Name of VRF.

location

(Optional) Specifies a node.

node-id

(Optional). Node ID. The node-id argument is entered in the rack/slot/module notation.

all

(Optional) Specifies all locations.

page

(Optional) Displays the command output on a single page at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl-C keys to stop the command output.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support bundles command for 802.3ad link bundles. This command is used to locate any issues related to bundling.

See the Cisco IOS XR Software command references for information about these commands and descriptions of their command output. The Cisco IOS XR Software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

cisco-support

read

show tech-support cef

To automatically run show commands that display information specific to Cisco Express Forwarding (CEF) debugging, use the show tech-support cef command inEXEC mode.

show tech-support cef [ vrf vrf-name [ ipv4 | ipv6 | mpls ] [ A .B .C .D | A .B .C .D /length | detail | brief | interface | rack ] ] [compress] [ location node-id ] { terminal [page] | file send-to [background] [ compressed | uncompressed ] }

Syntax Description

vrf

(Optional) Specifies a VPN routing and forwarding (VRF) instance.

vrf-name

(Optional) Name of a VRF.

ipv4

(Optional) Specifies IPv4 CEF information.

ipv6

(Optional) Specifies IPv6 CEF information.

mpls

(Optional) Specifies Multiprotocol Label Switching CEF information.

A.B.C.D

(Optional) Specifies IPv4 Prefix entries.

A.B.C.D/length

(Optional) Specifies IPv4 Prefix mask.

detail

(Optional) Specifies detailed CEF debugging information.

brief

(Optional) Specifies a brief CEF debugging information.

file

(Optional) Specifies that the command output is saved to a specified file.

sent-to

(Optional) Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • disk0: filename
  • disk1: filename
  • flash: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • nvram: filename
  • rcp: filename
  • slot0: filename
  • slot1: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

interface

(Optional) Specifies CEF interface status and configuration.

locationnode-id

(Optional) Specifies a node. The node-id argument is entered in the rack/slot/module notation.

rack

(Optional) Specifies a list of racks.

terminal

Displays the command output on the terminal.

page

(Optional) Displays the command output on a single page at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl-C keys to stop the command output.

Command Default

IPv4 is the default.

The command output is not compressed.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support cef command to run show commands that display information specific to CEF debugging. This command is used to locate any issues related to the Forwarding Information Base (FIB) which is more commonly referred to as Cisco Express Forwarding (CEF). This command generates CEF debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router.


Note


This command is not required during normal use of the router.


The following show commands run automatically when you run the show tech-support cef command:

  • show version
  • show running
  • show route {ipv4 | ipv6} unicast
  • show proc blocked
  • show cef {ipv4 | ipv6 | mpls} exceptions
  • show cef {ipv4 | ipv6 | mpls} drop
  • show ipv4 interface brief
  • show cef {ipv4 | ipv6} summary
  • show cef {ipv4 | ipv6 | mpls} interface
  • show cef ipv4 non-recursive
  • show cef {ipv4 | ipv6}
  • show cef {ipv4 | ipv6 | mpls} adjacency
  • show mpls forwarding (if the mpls keyword is specified)

See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

basic-services or cisco-support

read

cef

read

show tech-support cfgmgr

To automatically run show commands that display information to gather information about the configuration manager, use the show tech-support cfgmgr command in EXEC mode.

show tech-support cfgmgr [ file send-to [background] [ compressed | uncompressed ] | terminal [page] ]

Syntax Description

file

Specifies that the command output is saved to a specified file.

sent-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • disk0: filename
  • disk0a: filename
  • disk1: filename
  • disk1a: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • harddiskb: filename
  • nvram: filename
  • rcp: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

terminal

Specifies that the command output is displayed on the terminal.

page

(Optional) Specifies that the command output is displayed one page at a time. Use the return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl+C keys to stop the command output.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support cfgmgr command to gather information about the configuration manager. This command is used to locate any issues in regards to executing configuration commands or problems.

See the Cisco IOS XR Software command references for information about these commands and descriptions of their command output. The Cisco IOS XR Software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

cisco-support

read

show tech-support chdlc

To automatically run show commands that display debugging information related to Cisco high-level data link control (CHDLC) protocol, use the show tech-support chdlc command in the EXEC mode.

show tech-support chdlc file send-to [ interface | slow ] [ location node-id ] [rack]

Syntax Description

file

Specifies that the command output is saved to a specified file.

send-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • disk0: filename
  • disk1: filename
  • flash: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • nvram: filename
  • rcp: filename
  • slot0: filename
  • slot1: filename
  • tftp: filename

interface

(Optional) Displays information about a specific interface.

slow

(Optional) Displays the debugging output of chdlc.

location

(Optional) Specifies a node.

node-id

(Optional) Node ID. The node-id argument is entered in the rack/slot/module notation.

rack

(Optional) Displays a list of racks.

Command Default

None.

Command Modes

EXEC

Command History

Release

Modification

Release 3.9.0

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support chdlc command to run show commands that display CHDLC debugging information. This command generates information that can be useful for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.


Note


This command is not required during normal use of the router.


Task ID

Task ID

Operations

cisco-support

read

Examples

The following example how to run the show tech-support chdlc command on the router:

RP/0/RSP0/CPU0:router# show tech-support chdlc interface gigabitEthernet 0/6/5/0

show tech-support control-ethernet

To automatically run show commands that display information specific to control Ethernet debugging, use the show tech-support control-ethernet command in Administration EXEC mode.

show tech-support control-ethernet [fast] [ location node-id ] { terminal [page] | file send-to [background] [ compressed | uncompressed ] }

Syntax Description

fast

(Optional) Collects the output simultaneously from multiple line cards ina multi-chassis router.

location

(Optional) Specifies a node.

node-id

(Optional) Node ID. The node-id argument is entered in the rack/slot/module notation.

terminal

Displays the command output on the terminal.

page

(Optional) Displays the command output on a single page at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl-C keys to stop the command output.

file

Specifies that the command output is saved to a specified file.

sent-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • disk0: filename
  • disk1: filename
  • flash: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • nvram: filename
  • rcp: filename
  • slot0: filename
  • slot1: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

Command Default

The command output is not compressed.

Command Modes

Administration EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support control-ethernet command to run show commands that display information specific to control Ethernet debugging. This command is used to display information specific to Ethernet interface issues. This command generates control Ethernet information that can be useful for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.


Note


This command is not required during normal use of the router.


The following show commands run automatically when you run the show tech-support control-ethernet command:

  • show version
  • show controller fabric connectivity all
  • show controller switch 0 ports node-id
  • show controller switch 1 ports node-id
  • show controller switch 0 statistics node-id
  • show controller switch 1 statistics node-id
  • show controller switch udld node-id
  • show controller switch stp node-id
  • show controller switch inter-rack ports all node-id
  • show controller switch inter-rack statistics brief all node-id
  • show controller switch inter-rack statistics detail all node-id
  • show controller switch inter-rack udld all node-id
  • show controller switch inter-rack stp all node-id
  • show controller backplane ethernet detail node-id
  • show controller backplane ethernet trace node-id

See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

The show tech-support control-ethernet command also generates log files which are not listed. See the command output for log file information.

Task ID

Task ID

Operations

admin

read

Examples

RP/0/RSP0/CPU0:router(admin)#show tech-support control-ethernet terminal page 

 Number of nodes 13

Gathering required commands for show tech control-ethernet

Finding available nodes in the system

Node - 0/1/CPU0

Node - 0/1/SP

Node - 0/4/CPU0

Node - 0/4/CPU1

Node - 0/4/SP

Node - 0/6/CPU0

Node - 0/6/SP










Node - 0/SM0/SP

Node - 0/SM1/SP

Node - 0/SM2/SP

Node - 0/SM3/SP


-------------------------------------------------------------------------------

show tech-support control-ethernet

-------------------------------------------------------------------------------


------------------- show version ---------------------------------

Cisco IOS XR Software, Version 3.9.0.20I[DT_IMAGE]
Copyright (c) 2009 by Cisco Systems, Inc.

ROM: System Bootstrap, Version 1.51(20080807:092259) [CRS-1 ROMMON],

P2_CRS-8 uptime is 1 day, 18 hours, 10 minutes
System image file is "bootflash:disk0/hfr-os-mbi-3.8.0.20I/mbihfr-rp.vm"

cisco CRS-8/S (7457) processor with 4194304K bytes of memory.
7457 processor at 1197Mhz, Revision 1.2

4 Management Ethernet
16 GigabitEthernet
20 SONET/SDH
20 Packet over SONET/SDH
1019k bytes of non-volatile configuration memory.
1000592k bytes of disk0: (Sector size 512 bytes).
1000640k bytes of disk1: (Sector size 512 bytes).

Boot device on node 0/1/SP is bootflash:
Package active on node 0/1/SP:
hfr-pagent, V 3.8.0.20I[DT_IMAGE], Cisco Systems, at disk0:hfr-pagent-3.8.0.20I
Built on Wed Oct 29 17:24:33 DST 2008
By iox13.cisco.com in /auto/ioxbuild6/production/3.8.0.20I.DT_IMAGE/hfr/wor0

hfr-fpd, V 3.8.0.20I[DT_IMAGE], Cisco Systems, at disk0:hfr-fpd-3.8.0.20I
Built on Wed Oct 29 17:02:19 DST 2008
By iox3.cisco.com in /auto/ioxbuild6/production/3.8.0.20I.DT_IMAGE/hfr/work0

hfr-diags, V 3.8.0.20I[DT_IMAGE], Cisco Systems, at disk0:hfr-diags-3.8.0.20I
Built on Wed Oct 29 17:02:01 DST 2008
By iox3.cisco.com in /auto/ioxbuild6/production/3.8.0.20I.DT_IMAGE/hfr/work0

hfr-admin, V 3.8.0.20I[DT_IMAGE], Cisco Systems, at disk0:hfr-admin-3.8.0.20I
Built on Wed Oct 29 16:08:13 DST 2008
By iox30.cisco.com in /auto/ioxbuild6/production/3.8.0.20I.DT_IMAGE/hfr/wor0

hfr-base, V 3.8.0.20I[DT_IMAGE], Cisco Systems, at disk0:hfr-base-3.8.0.20I
Built on Wed Oct 29 16:07:35 DST 2008
By iox30.cisco.com in /auto/ioxbuild6/production/3.8.0.20I.DT_IMAGE/hfr/wor0

hfr-os-mbi, V 3.8.0.20I[DT_IMAGE], Cisco Systems, at disk0:hfr-os-mbi-3.8.0.20I
Built on Wed Oct 29 15:45:48 DST 2008
By iox30.cisco.com in /auto/ioxbuild6/production/3.8.0.20I.DT_IMAGE/hfr/wor0

Configuration register on node 0/1/CPU0 is 0x102
Boot device on node 0/1/CPU0 is mem:
Package active on node 0/1/CPU0:
hfr-services, V 3.8.0.20I[DT_IMAGE], Cisco Systems, at disk0:hfr-services-3.8.0I
Built on Wed Oct 29 17:03:08 DST 2008
By iox3.cisco.com in /auto/ioxbuild6/production/3.8.0.20I.DT_IMAGE/hfr/work0

hfr-pagent, V 3.8.0.20I[DT_IMAGE], Cisco Systems, at disk0:hfr-pagent-3.8.0.20I
Built on Wed Oct 29 17:24:33 DST 2008
By iox13.cisco.com in /auto/ioxbuild6/production/3.8.0.20I.DT_IMAGE/hfr/wor0

hfr-fpd, V 3.8.0.20I[DT_IMAGE], Cisco Systems, at disk0:hfr-fpd-3.8.0.20I
Built on Wed Oct 29 17:02:19 DST 2008
By iox3.cisco.com in /auto/ioxbuild6/production/3.8.0.20I.DT_IMAGE/hfr/work0

hfr-diags, V 3.8.0.20I[DT_IMAGE], Cisco Systems, at disk0:hfr-diags-3.8.0.20I
Built on Wed Oct 29 17:02:01 DST 2008
By iox3.cisco.com in /auto/ioxbuild6/production/3.8.0.20I.DT_IMAGE/hfr/work0

hfr-mcast, V 3.8.0.20I[DT_IMAGE], Cisco Systems, at disk0:hfr-mcast-3.8.0.20I
Built on Wed Oct 29 18:18:37 DST 2008
By iox22.cisco.com in /auto/ioxbuild6/production/3.8.0.20I.DT_IMAGE/hfr/wor0

hfr-mpls, V 3.8.0.20I[DT_IMAGE], Cisco Systems, at disk0:hfr-mpls-3.8.0.20I
Built on Wed Oct 29 18:18:25 DST 2008
By iox22.cisco.com in /auto/ioxbuild6/production/3.8.0.20I.DT_IMAGE/hfr/wor0

hfr-lc, V 3.8.0.20I[DT_IMAGE], Cisco Systems, at disk0:hfr-lc-3.8.0.20I
Built on Wed Oct 29 16:18:36 DST 2008
By iox30.cisco.com in /auto/ioxbuild6/production/3.8.0.20I.DT_IMAGE/hfr/wor0

hfr-fwdg, V 3.8.0.20I[DT_IMAGE], Cisco Systems, at disk0:hfr-fwdg-3.8.0.20I
Built on Wed Oct 29 16:13:27 DST 2008
By iox30.cisco.com in /auto/ioxbuild6/production/3.8.0.20I.DT_IMAGE/hfr/wor0

--More--

The following example shows a sample output of the show tech-support control-ethernet command on the ASR 9000 Series Router:

RP/0/RSP0/CPU0:router(admin)# show tech-support control-ethernet terminal

-------------------------------------------------------------------------------
 
                      show tech-support control-ethernet
 
-------------------------------------------------------------------------------
 

-------------------------------- show version ---------------------------------
 
Cisco IOS XR Software, Version 3.9.0[SIT_IMAGE]
Copyright (c) 2009 by Cisco Systems, Inc.
 
ROM: System Bootstrap, Version 1.2(20090903:202931) [ASR9K ROMMON],
 
Router uptime is 14 hours, 53 minutes
System image file is "tftp://202.153.144.25//auto/tftp-blr-users1/thia/image/comp-asr9k-mini.vm-3.9.0.34I.SIT_IMAGE"
 
cisco ASR9K Series (MPC8641D) processor with 4194304K bytes of memory.
MPC8641D processor at 1333MHz, Revision 2.2
 
4 Management Ethernet
40 GigabitEthernet
219k bytes of non-volatile configuration memory.
975M bytes of compact flash card.
33994M bytes of hard disk.
1605616k bytes of disk0: (Sector size 512 bytes).
1605616k bytes of disk1: (Sector size 512 bytes).
 
Configuration register on node 0/RSP0/CPU0 is 0x102
Boot device on node 0/RSP0/CPU0 is mem:
Package active on node 0/RSP0/CPU0:
asr9k-scfclient, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-scfclient-3.9.0.34I
    Built on Tue Dec  8 09:46:13 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-diags, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-diags-3.9.0.34I
    Built on Tue Dec  8 09:46:16 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-mcast, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-mcast-3.9.0.34I
    Built on Tue Dec  8 11:11:06 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-rout, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-rout-3.9.0.34I
    Built on Tue Dec  8 09:46:26 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-lc, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-lc-3.9.0.34I
    Built on Tue Dec  8 10:57:43 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-fwdg, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-fwdg-3.9.0.34I
    Built on Tue Dec  8 09:36:23 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-admin, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-admin-3.9.0.34I
    Built on Tue Dec  8 09:25:42 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-base, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-base-3.9.0.34I
    Built on Tue Dec  8 09:29:48 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-os-mbi, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-os-mbi-3.9.0.34I
    Built on Tue Dec  8 08:35:56 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
Configuration register on node 0/RSP1/CPU0 is 0x1922
Boot device on node 0/RSP1/CPU0 is mem:
Package active on node 0/RSP1/CPU0:
asr9k-scfclient, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-scfclient-3.9.0.34I
    Built on Tue Dec  8 09:46:13 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-diags, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-diags-3.9.0.34I
    Built on Tue Dec  8 09:46:16 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-mcast, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-mcast-3.9.0.34I
    Built on Tue Dec  8 11:11:06 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-rout, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-rout-3.9.0.34I
    Built on Tue Dec  8 09:46:26 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-lc, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-lc-3.9.0.34I
    Built on Tue Dec  8 10:57:43 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-fwdg, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-fwdg-3.9.0.34I
    Built on Tue Dec  8 09:36:23 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-admin, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-admin-3.9.0.34I
    Built on Tue Dec  8 09:25:42 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-base, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-base-3.9.0.34I
    Built on Tue Dec  8 09:29:48 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-os-mbi, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-os-mbi-3.9.0.34I
    Built on Tue Dec  8 08:35:56 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
Boot device on node 0/1/CPU0 is mem:
Package active on node 0/1/CPU0:
asr9k-scfclient, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-scfclient-3.9.0.34I
    Built on Tue Dec  8 09:46:13 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-diags, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-diags-3.9.0.34I
    Built on Tue Dec  8 09:46:16 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-mcast, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-mcast-3.9.0.34I
    Built on Tue Dec  8 11:11:06 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-lc, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-lc-3.9.0.34I
    Built on Tue Dec  8 10:57:43 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-fwdg, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-fwdg-3.9.0.34I
    Built on Tue Dec  8 09:36:23 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-admin, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-admin-3.9.0.34I
    Built on Tue Dec  8 09:25:42 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-base, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-base-3.9.0.34I
    Built on Tue Dec  8 09:29:48 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 
asr9k-os-mbi, V 3.9.0.34I[SIT_IMAGE], Cisco Systems, at mem:asr9k-os-mbi-3.9.0.34I
    Built on Tue Dec  8 08:35:56 UTC 2009
    By sjc-lds-511 in /auto/ioxbuild6/production/3.9.0.34I.SIT_IMAGE/asr9k/workspace for c4.2.1-p0
 

-------------------------------- show platform --------------------------------
Node            Type                      State            Config State
-----------------------------------------------------------------------------
0/RSP0/CPU0     A9K-RSP-4G(Active)        IOS XR RUN       PWR,NSHUT,MON
0/RSP1/CPU0     A9K-RSP-4G(Standby)       IOS XR RUN       PWR,NSHUT,MON
0/1/CPU0        A9K-40GE-B                IOS XR RUN       PWR,NSHUT,MON
 

Location: *CPU*
 

-------------------------------------------------------------------------------
 
                  show tech-support control-ethernet complete
 
-------------------------------------------------------------------------------

show tech-support ethernet

To automatically run show commands that display information specific to ethernet debugging, use the show tech-support ethernet command in EXEC mode.

show tech-support [ file send-to [background] [ compressed | uncompressed ] ] [ interface interface-type interface-instance ] [ location node-id ] [rack]

Syntax Description

file

(Optional) Specifies that the command output is saved to a specified file.

sent-to

(Optional) Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • disk0: filename
  • disk1: filename
  • flash: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • nvram: filename
  • rcp: filename
  • slot0: filename
  • slot1: filename
  • tftp: filename

interface

(Optional) Collects the status and configuration information about a specific interface.

interface-type

Identifies a physical interface or a virtual interface.

Note   

Use the show interfaces command to see a list of all possible interfaces currently configured on the router.

interface-instance

Specifies the interface instance. The argument interface-instance is expressed in the rack/slot/module notation.

locationnode-id

(Optional) Specifies a node. The node-id argument is entered in the rack/slot/module notation.

rack

(Optional) Specifies a list of racks.

Command Default

IPv4 is the default.

The command output is compressed.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support ethernet command to run show commands that display information specific to VLAN and ethernet infrastructure debugging. This command generates ethernet debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router.


Note


This command is not required during normal use of the router.


The following show commands run automatically when you run the show tech-support ethernet command:

  • show version
  • show running
  • show route {ipv4 | ipv6} unicast
  • show proc blocked
  • show ethernet {ipv4 | ipv6 | mpls} exceptions
  • show ethernet {ipv4 | ipv6 | mpls} drop
  • show ipv4 interface brief
  • show mpls forwarding (if the mpls keyword is specified)

See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

cisco-support

read

show tech-support fabric

To automatically run show commands that display information specific to fabric debugging, use the show tech-support fabric command in Administration EXEC mode.

show tech-support fabric [ terminal | file send-to ]

Command Default

The command output is not compressed.

Command Modes

Administration EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support fabric command to run show commands that display information specific to fabric debugging. This command generates fabric information that can be useful for Cisco Technical Support representatives when troubleshooting a router.


Note


This command is not required during normal use of the router.


The following show commands run automatically when you run the show tech-support fabric multicast command:

  • show controllers fabric fgid stat all detail
  • show controllers fabric fgid info
  • show process fgid_allocator
  • show process fgid_aggregator
  • show process fgid_server
  • show process fgid_allocator

The following show commands run automatically when you run the show tech-support fabric traffic command:

  • show controllers fabric plane all detail
  • show controllers fabric plane all stat brief
  • show controllers fabric plane all stat detail
  • show controllers fabric link port
  • show controller fabricq stat
  • show controllers fabricq queues
  • show controllers fabricq eio links all
  • show controller ingressq stat
  • show controller ingressq queue all
  • show controller ingressq fabric pla
  • show control ingressq block ssm bpmem 0
  • show controllers ingressq block fqm queue
  • show controllers ingressq vports all
  • show controllers ingressq interfaces all
  • show controllers ingressq eio links all
  • show controller fia rxslice all uq all channel all
  • show controllers cpuctrl devices ingressq pdma queue all act
  • show controllers cpuctrl devices egressq pdma queue all act
  • show controllers cpuctrl devices fabricq pdma queue all act

See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

admin

read

cisco-support

read

show tech-support gsp

To automatically run show commands that display information specific to Gigabit Switch Platform (GSP) debugging, use the show tech-support gsp command in EXEC mode.

show tech-support gsp [ client | group | rack ] [ location node-id ] { terminal [page] | file send-to [background] [ compressed | uncompressed ] }

Syntax Description

client

(Optional) Displays the client tech-support information.

group

(Optional) Displays the group tech-support information.

rack

(Optional) Displays the number of racks

location

(Optional) Specifies a node.

node-id

(Optional) Node ID. The node-id argument is entered in the rack/slot/module notation.

terminal

Displays the command output on the terminal.

page

(Optional) Displays the command output on a single page at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl-C keys to stop the command output.

file

Specifies that the command output is saved to a specified file.

sent-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • disk0: filename
  • disk1: filename
  • flash: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • nvram: filename
  • rcp: filename
  • slot0: filename
  • slot1: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

Command Default

The command output is not compressed.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support gsp command to run show commands that display information specific to GSP debugging. GSP is a common IPC utilized in Cisco IOS XR software to communicate between nodes. This command would be used to determine if there are any issues with GSP communication between nodes. This command generates GSP debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router.


Note


This command is not required during normal use of the router.


The following show commands run automatically when you run the show tech-support gsp command:

  • show gsp group addresses
  • show gsp group admin addresses
  • show gsp group lr-control addresses
  • show gsp group gid 0
  • show gsp group gid 1000
  • show gsp group gid 2000
  • show gsp memory
  • show gsp stats client
  • show gsp stats server jid 0
  • show gsp trace server bootstrap location all
  • show gsp trace server timeout slow location all
  • show gsp trace server timeout fast location all
  • show gsp trace server limp fast location all
  • show gsp trace server limp slow location all
  • show gsp trace server error api location all
  • show gsp trace server error minor location all
  • show gsp trace server ens location all

See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

basic-services or cisco-support

read

sysmgr

read

show tech-support igmp snooping

To automatically run show commands that display debugging information specific to igmp snooping, use the show tech-support igmp snooping command in the EXEC mode.

show tech-support igmp snooping [ file send-to ] [ location node-id ] [terminal]

Syntax Description

file

(Optional) Specifies that the command output is saved to a specified file.

send-to

(Optional) Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • disk0: filename
  • disk1: filename
  • flash: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • nvram: filename
  • rcp: filename
  • slot0: filename
  • slot1: filename
  • tftp: filename

location

(Optional) Specifies a node.

node-id

(Optional) Node ID. The node-id argument is entered in the rack/slot/module notation.

terminal

Specifies that the command output is displayed on the terminal.

page

(Optional) Specifies that the command output is displayed one page at a time. Use the return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl+C keys to stop the command output.

Command Default

Output is logged to the terminal screen.

Command Modes

EXEC

Command History

Release

Modification

Release 3.9.0

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


This command generates igmp snooping debug information that can be useful for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.


Note


This command is not required during normal use of the router.


The following show commands run automatically when you run the show tech-support igmp snooping command:

  • show version
  • show running-config sanitize
  • show redundancy
  • show logging
  • show platform
  • show install active detail
  • show install committed detail
  • show install inactive detail
  • show pkgfs trace location all
  • show install trace loadpath location node-id
  • show install trace io location node-id
  • show install trace instdir-lr location node-id
  • show install trace insthelper location node-id
  • show install trace notify location node-id
  • show install trace replicator location node-id
  • show install trace pkg location node-id
  • show install trace inv location node-id
  • show install trace platform location node-id
  • show install trace ior location node-id
  • show install trace state-file-replication location node-id
  • show install trace sds location node-id
  • show memory summary location node-id
  • show context location node-id
  • show processes memory location node-id
  • show processes aborts location node-id
  • show processes blocked location node-id
  • show pkgfs trace location node-id
  • show filesystem location node-id
  • run diskinfo (various)

See the Cisco IOS XR Software command references for information about these commands and descriptions of their command output. The Cisco IOS XR Software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

cisco-support

read

Examples

The following example shows a truncated version of the show tech-support igmp snooping command output:

RP/0/RSP0/CPU0:router# show tech-support igmp snooping terminal

-------------------------------------------------------------------------------
 
                        show tech-support igmp snooping
 
-------------------------------------------------------------------------------
 

-------------------------------- show version ---------------------------------
 
Cisco IOS XR Software, Version 3.9.0[00]
Copyright (c) 2009 by Cisco Systems, Inc.
 
ROM: System Bootstrap, Version 1.1(20090521:183759) [ASR9K ROMMON],
 
MCAST-6 uptime is 6 days, 20 hours, 50 minutes
System image file is "bootflash:disk0/asr9k-os-mbi-3.9.0/mbiasr9k-rp.vm"
 
cisco ASR9K Series (MPC8641D) processor with 4194304K bytes of memory.
MPC8641D processor at 1333MHz, Revision 2.2
 
2 Management Ethernet
45 GigabitEthernet
219k bytes of non-volatile configuration memory.
975M bytes of compact flash card.
33994M bytes of hard disk.
1605616k bytes of disk0: (Sector size 512 bytes).
1605616k bytes of disk1: (Sector size 512 bytes).
 
Configuration register on node 0/RSP0/CPU0 is 0x1922
Boot device on node 0/RSP0/CPU0 is disk0:
Package active on node 0/RSP0/CPU0:
asr9k-scfclient, V 3.9.0[00], Cisco Systems, at disk0:asr9k-scfclient-3.9.0
    Built on Mon Dec 14 12:38:43 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-diags, V 3.9.0[00], Cisco Systems, at disk0:asr9k-diags-3.9.0
    Built on Mon Dec 14 12:38:44 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-mcast, V 3.9.0[00], Cisco Systems, at disk0:asr9k-mcast-3.9.0
    Built on Mon Dec 14 13:33:02 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-mpls, V 3.9.0[00], Cisco Systems, at disk0:asr9k-mpls-3.9.0
    Built on Mon Dec 14 13:31:50 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-rout, V 3.9.0[00], Cisco Systems, at disk0:asr9k-rout-3.9.0
    Built on Mon Dec 14 12:38:56 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-lc, V 3.9.0[00], Cisco Systems, at disk0:asr9k-lc-3.9.0
    Built on Mon Dec 14 13:28:31 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-fwdg, V 3.9.0[00], Cisco Systems, at disk0:asr9k-fwdg-3.9.0
    Built on Mon Dec 14 12:34:50 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-admin, V 3.9.0[00], Cisco Systems, at disk0:asr9k-admin-3.9.0
    Built on Mon Dec 14 12:29:39 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-base, V 3.9.0[00], Cisco Systems, at disk0:asr9k-base-3.9.0
    Built on Mon Dec 14 12:32:17 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-os-mbi, V 3.9.0[00], Cisco Systems, at disk0:asr9k-os-mbi-3.9.0
    Built on Mon Dec 14 12:12:19 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
Boot device on node 0/1/CPU0 is mem:
Package active on node 0/1/CPU0:
asr9k-scfclient, V 3.9.0[00], Cisco Systems, at disk0:asr9k-scfclient-3.9.0
    Built on Mon Dec 14 12:38:43 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-diags, V 3.9.0[00], Cisco Systems, at disk0:asr9k-diags-3.9.0
    Built on Mon Dec 14 12:38:44 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-mcast, V 3.9.0[00], Cisco Systems, at disk0:asr9k-mcast-3.9.0
    Built on Mon Dec 14 13:33:02 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-mpls, V 3.9.0[00], Cisco Systems, at disk0:asr9k-mpls-3.9.0
    Built on Mon Dec 14 13:31:50 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-lc, V 3.9.0[00], Cisco Systems, at disk0:asr9k-lc-3.9.0
    Built on Mon Dec 14 13:28:31 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-fwdg, V 3.9.0[00], Cisco Systems, at disk0:asr9k-fwdg-3.9.0
    Built on Mon Dec 14 12:34:50 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-admin, V 3.9.0[00], Cisco Systems, at disk0:asr9k-admin-3.9.0
    Built on Mon Dec 14 12:29:39 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-base, V 3.9.0[00], Cisco Systems, at disk0:asr9k-base-3.9.0
    Built on Mon Dec 14 12:32:17 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-os-mbi, V 3.9.0[00], Cisco Systems, at disk0:asr9k-os-mbi-3.9.0
    Built on Mon Dec 14 12:12:19 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
Boot device on node 0/2/CPU0 is mem:
Package active on node 0/2/CPU0:
asr9k-scfclient, V 3.9.0[00], Cisco Systems, at disk0:asr9k-scfclient-3.9.0
    Built on Mon Dec 14 12:38:43 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-diags, V 3.9.0[00], Cisco Systems, at disk0:asr9k-diags-3.9.0
    Built on Mon Dec 14 12:38:44 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-mcast, V 3.9.0[00], Cisco Systems, at disk0:asr9k-mcast-3.9.0
    Built on Mon Dec 14 13:33:02 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-mpls, V 3.9.0[00], Cisco Systems, at disk0:asr9k-mpls-3.9.0
    Built on Mon Dec 14 13:31:50 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-lc, V 3.9.0[00], Cisco Systems, at disk0:asr9k-lc-3.9.0
    Built on Mon Dec 14 13:28:31 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-fwdg, V 3.9.0[00], Cisco Systems, at disk0:asr9k-fwdg-3.9.0
    Built on Mon Dec 14 12:34:50 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-admin, V 3.9.0[00], Cisco Systems, at disk0:asr9k-admin-3.9.0
    Built on Mon Dec 14 12:29:39 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-base, V 3.9.0[00], Cisco Systems, at disk0:asr9k-base-3.9.0
    Built on Mon Dec 14 12:32:17 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 
asr9k-os-mbi, V 3.9.0[00], Cisco Systems, at disk0:asr9k-os-mbi-3.9.0
    Built on Mon Dec 14 12:12:19 UTC 2009
    By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0
 

---------------------- show running-config igmp snooping ----------------------
igmp snooping profile prof1
 ttl-check disable
 router-alert-check disable
!
 

----------------- show igmp snooping summary statistics debug -----------------
 
  Bridge Domains:                                      1
  IGMP Snooping Bridge Domains:                        1
  Ports:                                               2
  IGMP Snooping Ports:                                 1
  Mrouters:                                            0
  STP Forwarding Ports:                                0
  IGMP Groups:                                         0
    Member Ports:                                      0
  IGMP Source Groups:                                  0
    Static/Include/Exclude:                        0/0/0
    Member Ports (Include/Exclude):                  0/0
  Traffic Statistics (elapsed time since last cleared 6d20h):
                                     Received  Reinjected   Generated
    Messages:                               0           0           0
      IGMP General Queries:                 0           0           0
      IGMP Group Specific Queries:          0           0           0
      IGMP G&S Specific Queries:            0           0           0
      IGMP V2 Reports:                      0           0           0
      IGMP V3 Reports:                      0           0           0
      IGMP V2 Leaves:                       0           0           0
      IGMP Global Leaves:                   0           -           0
      PIM Hellos:                           0           0           -
    Rx Packet Treatment:
      Packets Flooded:                                  0
      Packets Forwarded To Members:                     0
      Packets Forwarded To Mrouters:                    0
      Packets Consumed:                                 0
    Rx Errors:
      None
    Rx Other:
      None
    Tx Errors:
      None
  L2FIB Statistics (elapsed time since last cleared 6d20h):
    BD Created Notifications:                           2
    BD Deleted Notifications:                           1
    EFP Added Notifications:                            9
    EFP Removed Notifications:                          2
    EFP STP Change Notifications:                       4
    BD Topology Change Notifications:                   0
    BD Added:                                           2
    BD Deleted:                                         1
    BD Profile Change:                                  0
    BD Profile Added:                                   0
    BD Profile Removed:                                 0
    BD Batch Start:                                     4
    BD Batch End:                                       4
    BD Mark:                                            0
    BD Sweep:                                           1
    EFP Added:                                          4
    EFP Deleted:                                        2
    EFP Profile Changed:                                0
    EFP Profile Unchanged:                              5
    EFP Profile Added:                                  0
    EFP Profile Removed:                                0
    EFP Oper State To Up:                               3
    EFP Oper State To Down:                             1
    EFP STP State To Forwarding:                        2
    EFP STP State To Blocked:                           0
    EFP STP State To Not Participating:                 0
    EFP Batch Start:                                   10
    EFP Batch End:                                     10
    EFP Mark:                                           0
    EFP Sweep:                                          1
    L2FIB Replay:                                       3
    Mroute Msgs Sent:                                   4
    Cfg Msgs Sent:                                      8
    BDXC Send:                                          8
    Errors:
      None
  Network Statistics (elapsed time since last cleared 6d20h):
    Socket Event:                                       0
    Network Connection Open Event:                      2
    Network Connection Close Event:                     0
    Packet Event:                                       2
    Packet Event Disconnect:                            0
    Packet Event Empty:                                 0
    Packet Event Empty Watermark:                       2
    Rx IGMP Packet Attempt:                             0
    Rx IGMP Packet Success:                             0
    Rx PIM Packet Attempt:                              0
    Rx PIM Packet Success:                              0
    Tx IGMP Packet Attempt:                             0
    Tx IGMP Packet Success:                             0
    Errors:
        None
  Internal Data:
    Ltrace:         Enabled
    Error Debug:    Disabled
    Other Debug:    Disabled
    System Mac:     00:00:00:00:00:00
  Internal Statistics (elapsed time since last cleared 6d20h):
    None
 

---------- show igmp snooping bridge-domain detail statistics debug -----------
 
Bridge Domain        Profile              Act  Ver  #Ports  #Mrtrs  #Grps   #SGs
-------------        -------              ---  ---  ------  ------  -----   ----
bg:bd                prof1                  Y   --       2       0      0      0
 
  Profile Configured Attributes:
    System IP Address:                   0.0.0.0
    Minimum Version:                     2
    Report Suppression:                  Enabled
    Unsolicited Report Interval:         1000 (milliseconds)
    TCN Query Solicit:                   Disabled
    TCN Flood:                           Enabled
    TCN Flood Query Count:               2
    Router Alert Check:                  Disabled
    TTL Check:                           Disabled
    Internal Querier Support:            Disabled
    Querier Query Interval:              60 (seconds)
    Querier LMQ Interval:                1000 (milliseconds)
    Querier LMQ Count:                   2
    Querier Robustness:                  2
  Querier:                               Not Present
  Mrouter Ports:                         0
  STP Forwarding Ports:                  0
  Groups:                                0
    Member Ports:                        0
  V3 Source Groups:                      0
    Static/Include/Exclude:              0/0/0
    Member Ports (Include/Exclude):      0/0
  XID:                                   BD:0x0
  Creation Time:                         1d00h
  Snooping Creation Time:                1d00h
  Flood Mode:                            Disabled
  Star Star Mroute PD Data:
    Size:                                4
    Data:                                0x00 0x00 0x80 0x81
  Client L2Info:
    None
  MTU:                                   1400
  Traffic Statistics (elapsed time since last cleared 5d20h):
                                     Received  Reinjected   Generated
    Messages:                               0           0           0
      IGMP General Queries:                 0           0           0
      IGMP Group Specific Queries:          0           0           0
      IGMP G&S Specific Queries:            0           0           0
      IGMP V2 Reports:                      0           0           0
      IGMP V3 Reports:                      0           0           0
      IGMP V2 Leaves:                       0           0           0
      IGMP Global Leaves:                   0           -           0
      PIM Hellos:                           0           0           -
    Rx Packet Treatment:
      Packets Flooded:                                  0
      Packets Forwarded To Members:                     0
      Packets Forwarded To Mrouters:                    0
      Packets Consumed:                                 0
    Rx Errors:
      None
    Rx Other:
      None
    Tx Errors:
      None

show tech-support install

To automatically run show commands that display information specific to installation information, use the show tech-support install command in the EXEC and administration EXEC modes .

show tech-support install [ file send-to [background] [ compressed | uncompressed ] ] [ location node-id ] [rack]

Syntax Description

page

(Optional) Displays the command output on a single page at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

file

(Optional) Specifies that the command output is saved to a specified file.

send-to

(Optional) Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • disk0: filename
  • disk1: filename
  • flash: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • nvram: filename
  • rcp: filename
  • slot0: filename
  • slot1: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

location node-id

(Optional) Specifies a node. The node-id argument is entered in the rack/slot/module notation.

rack

(Optional) Displays the list of racks.

Command Default

Output is logged to the terminal screen.

Command Modes

Administration EXEC

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support install command to run show commands that display information specific to installation information. This command is useful for any problems encountered while executing install operations on the system during an install activate, install add, remove, or commit operation.This command generates installation information that can be useful for Cisco Technical Support representatives when troubleshooting a router.


Note


This command is not required during normal use of the router.


The following show commands run automatically when you run the show tech-support install command:

  • show install request
  • show version
  • show install active summary
  • show install committed summary
  • show install package all detail
  • show install log verbose
  • show running-config sanitize
  • show redundancy
  • show logging
  • show platform
  • show install active detail
  • show install committed detail
  • show install inactive detail
  • show pkgfs trace location all
  • show install trace loadpath location node-id
  • show install trace io location node-id
  • show install trace instdir-lr location node-id
  • show install trace insthelper location node-id
  • show install trace notify location node-id
  • show install trace replicator location node-id
  • show install trace pkg location node-id
  • show install trace inv location node-id
  • show install trace platform location node-id
  • show install trace ior location node-id
  • show install trace state-file-replication location node-id
  • show install trace sds location node-id
  • show memory summary location node-id
  • show context location node-id
  • show processes memory location node-id
  • show processes aborts location node-id
  • show processes blocked location node-id
  • show pkgfs trace location node-id
  • show filesystem location node-id
  • run diskinfo (various)

See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

basic-services or cisco-support

read

pkg-mgmt

read

show tech-support l2vpn

To automatically run show commands that display information specific to Layer 2 Virtual Private Network (L2VPN) debugging, use the show tech-support l2vpn command in EXEC mode.

show tech-support l2vpn { file send-to [background] [ compressed | uncompressed ] | terminal [page] [rack] }

Syntax Description

file

Specifies that the command output is saved to a specified file.

send-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • disk0: filename
  • disk0a: filename
  • disk1: filename
  • disk1a: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • harddiskb: filename
  • nvram: filename
  • rcp: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

terminal

Specifies that the command output is displayed on the terminal.

page

(Optional) Specifies that the command output is displayed one page at a time. Use the return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl+C keys to stop the command output.

rack

(Optional) Displays the list of racks.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


This command collects information for Layer 2 VPN related issues that can be useful for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.


Note


This command is not required during normal use of the router.


See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

cisco-support

read

Examples

RP/0/RSP0/CPU0:router# show tech-support l2vpn terminal page

-------------------------------------------------------------------------------

              show tech-support l2vpn (Detail with Event traces)               

-------------------------------------------------------------------------------


-------------------------------- show version ---------------------------------

Cisco IOS XR Software, Version 3.6.0.16I[SIT1_IMAGE1]
Copyright (c) 2007 by Cisco Systems, Inc.

ROM: System Bootstrap, Version 1.48(20070928:224557) [CRS-1 ROMMON],  

P1_CRS-8 uptime is 4 days, 20 hours, 49 minutes
System image file is "disk0:hfr-os-mbi-3.6.0.16I/mbihfr-rp.vm"

cisco CRS-8/S (7457) processor with 4194304K bytes of memory.
7457 processor at 1197Mhz, Revision 1.2

4 T3 Port controller(s)
20 Packet over SONET/SDH network interface(s)
20 SONET/SDH Port controller(s)
4 Serial network interface(s)
4 Ethernet/IEEE 802.3 interface(s)
16 GigabitEthernet/IEEE 802.3 interface(s)
1019k bytes of non-volatile configuration memory.
38079M bytes of hard disk.
1000592k bytes of ATA PCMCIA card at disk 0 (Sector size 512 bytes).
1000640k bytes of ATA PCMCIA card at disk 1 (Sector size 512 bytes).

Configuration register on node 0/1/CPU0 is 0x102
Boot device on node 0/1/CPU0 is mem:
Package active on node 0/1/CPU0:
hfr-sbc, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-sbc-3.6.0.16I
    Built on Tue Oct  2 15:07:32 DST 2007
    By sjce-gf-071.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-pagent, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-pagent-3.6.0.I
    Built on Tue Oct  2 15:58:47 DST 2007
    By iox42.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8

hfr-fpd, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-fpd-3.6.0.16I
    Built on Tue Oct  2 14:48:41 DST 2007
    By sjce-gf-071.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-diags, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-diags-3.6.0.16I
    Built on Tue Oct  2 14:48:32 DST 2007
    By sjce-gf-071.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-mcast, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-mcast-3.6.0.16I
    Built on Tue Oct  2 14:26:29 DST 2007
    By sjce-gf-061.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-mpls, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-mpls-3.6.0.16I
    Built on Tue Oct  2 14:22:48 DST 2007
    By sjce-gf-061.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-lc, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-lc-3.6.0.16I
    Built on Tue Oct  2 14:02:24 DST 2007
    By iox26.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8

hfr-fwdg, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-fwdg-3.6.0.16I
    Built on Tue Oct  2 13:57:12 DST 2007
    By iox26.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8

hfr-admin, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-admin-3.6.0.16I
    Built on Tue Oct  2 13:53:07 DST 2007
    By iox26.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8

hfr-base, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-base-3.6.0.16I
    Built on Tue Oct  2 13:51:10 DST 2007
    By iox26.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8

hfr-os-mbi, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-os-mbi-3.6.0.I
    Built on Tue Oct  2 13:28:38 DST 2007
    By iox26.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8

Configuration register on node 0/4/CPU0 is 0x102
Boot device on node 0/4/CPU0 is disk0:
Package active on node 0/4/CPU0:
hfr-sbc, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-sbc-3.6.0.16I
    Built on Tue Oct  2 15:07:32 DST 2007
    By sjce-gf-071.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-pagent, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-pagent-3.6.0.I
    Built on Tue Oct  2 15:58:47 DST 2007
    By iox42.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8

hfr-fpd, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-fpd-3.6.0.16I
    Built on Tue Oct  2 14:48:41 DST 2007
    By sjce-gf-071.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-doc, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-doc-3.6.0.16I
    Built on Tue Oct  2 14:48:52 DST 2007
    By sjce-gf-071.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-diags, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-diags-3.6.0.16I
    Built on Tue Oct  2 14:48:32 DST 2007
    By sjce-gf-071.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-mgbl, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-mgbl-3.6.0.16I
    Built on Tue Oct  2 14:20:33 DST 2007
    By sjce-gf-061.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-mcast, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-mcast-3.6.0.16I
    Built on Tue Oct  2 14:26:29 DST 2007
    By sjce-gf-061.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-mpls, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-mpls-3.6.0.16I
    Built on Tue Oct  2 14:22:48 DST 2007
    By sjce-gf-061.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-rout, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-rout-3.6.0.16I
    Built on Tue Oct  2 14:06:14 DST 2007
    By iox26.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8

hfr-k9sec, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-k9sec-3.6.0.16I
    Built on Tue Oct  2 14:43:56 DST 2007
    By sjce-gf-074.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-lc, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-lc-3.6.0.16I
    Built on Tue Oct  2 14:02:24 DST 2007
    By iox26.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8

hfr-fwdg, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-fwdg-3.6.0.16I
    Built on Tue Oct  2 13:57:12 DST 2007
    By iox26.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8

hfr-admin, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-admin-3.6.0.16I
    Built on Tue Oct  2 13:53:07 DST 2007
    By iox26.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8

hfr-base, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-base-3.6.0.16I
    Built on Tue Oct  2 13:51:10 DST 2007
    By iox26.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8
          
hfr-os-mbi, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-os-mbi-3.6.0.I
    Built on Tue Oct  2 13:28:38 DST 2007
    By iox26.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8

Configuration register on node 0/4/CPU1 is 0x102
Boot device on node 0/4/CPU1 is disk0:
Package active on node 0/4/CPU1:
hfr-sbc, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-sbc-3.6.0.16I
    Built on Tue Oct  2 15:07:32 DST 2007
    By sjce-gf-071.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-pagent, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-pagent-3.6.0.I
    Built on Tue Oct  2 15:58:47 DST 2007
    By iox42.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8

hfr-fpd, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-fpd-3.6.0.16I
    Built on Tue Oct  2 14:48:41 DST 2007
    By sjce-gf-071.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-doc, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-doc-3.6.0.16I
    Built on Tue Oct  2 14:48:52 DST 2007
    By sjce-gf-071.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8
          
hfr-diags, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-diags-3.6.0.16I
    Built on Tue Oct  2 14:48:32 DST 2007
    By sjce-gf-071.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-mgbl, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-mgbl-3.6.0.16I
    Built on Tue Oct  2 14:20:33 DST 2007
    By sjce-gf-061.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-mcast, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-mcast-3.6.0.16I
    Built on Tue Oct  2 14:26:29 DST 2007
    By sjce-gf-061.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-mpls, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-mpls-3.6.0.16I
    Built on Tue Oct  2 14:22:48 DST 2007
    By sjce-gf-061.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-rout, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-rout-3.6.0.16I
    Built on Tue Oct  2 14:06:14 DST 2007
    By iox26.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8

hfr-k9sec, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-k9sec-3.6.0.16I
    Built on Tue Oct  2 14:43:56 DST 2007
    By sjce-gf-074.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-lc, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-lc-3.6.0.16I
    Built on Tue Oct  2 14:02:24 DST 2007
    By iox26.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8

hfr-fwdg, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-fwdg-3.6.0.16I
    Built on Tue Oct  2 13:57:12 DST 2007
    By iox26.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8

hfr-admin, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-admin-3.6.0.16I
    Built on Tue Oct  2 13:53:07 DST 2007
    By iox26.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8

hfr-base, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-base-3.6.0.16I
    Built on Tue Oct  2 13:51:10 DST 2007
    By iox26.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8

hfr-os-mbi, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-os-mbi-3.6.0.I
    Built on Tue Oct  2 13:28:38 DST 2007
    By iox26.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8

Configuration register on node 0/6/CPU0 is 0x102
Boot device on node 0/6/CPU0 is mem:
Package active on node 0/6/CPU0:
hfr-sbc, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-sbc-3.6.0.16I
    Built on Tue Oct  2 15:07:32 DST 2007
    By sjce-gf-071.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-pagent, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-pagent-3.6.0.I
    Built on Tue Oct  2 15:58:47 DST 2007
    By iox42.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8

hfr-fpd, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-fpd-3.6.0.16I
    Built on Tue Oct  2 14:48:41 DST 2007
    By sjce-gf-071.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-diags, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-diags-3.6.0.16I
    Built on Tue Oct  2 14:48:32 DST 2007
    By sjce-gf-071.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

hfr-mcast, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-mcast-3.6.0.16I
    Built on Tue Oct  2 14:26:29 DST 2007
    By sjce-gf-061.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8

show tech-support lrd

To automatically run show commands that display information specific to logical router daemon (LRD) debugging, use the show tech-support lrd command in EXEC mode.

show tech-support lrd { file send-to [background] [ compressed | uncompressed ] | terminal [page] | location { node-id | all } [rack] }

Syntax Description

file

Specifies that the command output is saved to a specified file.

send-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • disk0: filename
  • disk0a: filename
  • disk1: filename
  • disk1a: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • harddiskb: filename
  • nvram: filename
  • rcp: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

terminal

Specifies that the command output is displayed on the terminal.

page

(Optional) Specifies that the command output is displayed one page at a time. Use the return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl+C keys to stop the command output.

location

(Optional) Specifies a node.

node-id

(Optional) Node ID. The node-id argument is entered in the rack/slot/module notation.

all

(Optional) Specifies all locations.

rack

(Optional) Displays the list of racks.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support lrd command for the LRD debugging, which controls the Secure Domain Router (SDR) architecture. The system always has at least one SDR at any time. It collects relevant information when issues arise with the SDR management within the system. This command can be useful for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.


Note


This command is not required during normal use of the router.


See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

cisco-support

read

Examples

The following example shows some of the show tech-support lrd command output that is displayed on the terminal:

RP/0/RSP0/CPU0:router# show tech-support lrd terminal page

-------------------------------------------------------------------------------

                             show tech-support lrd                             

-------------------------------------------------------------------------------





lrdbg 'i' getting CONFIG INFO
Starting lrdbg commands for local node.
node_name = node0_RP0_CPU0 chan_name is /net/node0_RP0_CPU0/dev/lrd_local
Local nodeid=513 Local lrname=Owner Local lrid = 0
lrdbg: Successfully connected to channel /net/node0_RP0_CPU0/dev/lrd_local 

Starting lrdbg commands for node = node0_RP0_CPU0 lrid = 0

DLRSC Info for Node = node0_RP0_CPU0 Nodeid = 0x201 lrid = 0
We are the dLRSC, Backup dLRSC is 0x211

 --More--
 liblrd_dl_node_state_0.dll                   0.0
 liblrd_dl_sw_state_0.dll                     0.0
 liblrd_dl_fwd_ldr_0.dll                      0.0
 liblrd_alpha_fwd.dll                         1.0
 liblrd_envmon_fwd.dll                        1.0
 liblrd_invmgr_fwd.dll                        1.0
Inventory Info for Node = node0_RP0_CPU0 lrid = 0
Success: node_count=6, ready=1
node=0x11, type=2, memsize=256, cpus=1, speed=100, sw_state=6, red_state=0 lr_n0
node=0x41, type=1, memsize=256, cpus=1, speed=100, sw_state=6, red_state=1 lr_nf
node=0x42, type=1, memsize=256, cpus=1, speed=100, sw_state=6, red_state=1 lr_nf
node=0x61, type=2, memsize=256, cpus=1, speed=100, sw_state=6, red_state=0 lr_n0
node=0x201, type=0, memsize=256, cpus=1, speed=100, sw_state=6, red_state=1 lr_1
node=0x211, type=0, memsize=256, cpus=1, speed=100, sw_state=6, red_state=2 lr_1

LR name Info for Node = node0_RP0_CPU0

dSC node:         0/RP0/CPU0
standby dSC node: 0/RP1/CPU0

LRs (Configured, pre-existing) basic info:
 Name                                LRid  dLRSC         backup_dLRSC
---------------------------------------------------------------------
 Owner                               0     0/RP0/CPU0    0/RP1/CPU0   

LRs (Configured, pre-existing) basic info:
Lr-Names             LRid dLRSC      StbydLRSC  Primary    Primary1   McastAddr 
--------------------------------------------------------------------------------
Owner                0    0/RP0/CPU0 0/RP1/CPU0 0/RP0/CPU0 0/RP1/CPU0 0        0
		          
Client Vector for Node = node0_RP0_CPU0
Received 23 currently connected lrd clients
 PID    op    eFLAGS    cFLAGS
_______________________________
  168027     0x1     0x4       0x3 
  77863     0x11     0x204       0x1 
  81963     0x10     0x200       0x0 
  168024     0x2     0x0       0x0 
  168026     0x2     0x0       0x0 
  200800     0x1     0x4       0x1f 
  204909     0x1     0x4       0xb 
  209006     0x23     0x84       0xb 
  385148     0x1     0x4       0x7 
  385149     0x1     0x4       0x7 
  381047     0x41     0x25       0x3 
  381043     0x1     0x4       0x3 
  381041     0x1     0x4       0x7 
  397456     0x1     0x4       0x3 
  397485     0x1     0x14       0x4 
  397484     0x1     0x14       0x4 
  397498     0x1     0x4       0x4 
  405725     0x1     0x4       0x7 
  405735     0x1     0x4       0x4 
  405744     0x40     0x1       0x0 
  434434     0x1     0x4       0x7 
  434435     0x1     0x4       0x7 
  434433     0x1     0x4       0x7 

DLL loaded for Node = node0_RP0_CPU0
          dll name                        version
_________________________________________________
Node State Info for Node = node0_RP0_CPU0

 Type     Node        Nodeid    Prev State        Cur State         LRid  (PD c)
 -------------------------------------------------------------------------------
 LC(2)    0/1/CPU0     0x11     RUNNING_MBI(5)    RUNNING_ENA(6)     0    (5242)
 DRP(1)   0/4/CPU0     0x41     RUNNING_MBI(5)    RUNNING_ENA(6)     0    (119))
 DRP(1)   0/4/CPU1     0x42     RUNNING_MBI(5)    RUNNING_ENA(6)     0    (119))
 LC(2)    0/6/CPU0     0x61     RUNNING_MBI(5)    RUNNING_ENA(6)     0    (5242)
 RP(0)    0/RP0/CPU0   0x201    RUNNING_MBI(5)    RUNNING_ENA(6)     0    (19) )
 RP(0)    0/RP1/CPU0   0x211    PRESENT(1)        RUNNING_ENA(6)     0    (19) )

Sw State Info for Node = node0_RP0_CPU0

 -------------------------------------------------------------------------------
 Type     Node        Nodeid  PrevState  CurState  Red-Role/       Partner   Par
                               (BAND)     (BAND)   Red-State        node     nae
 -------------------------------------------------------------------------------
 LC(2)    0/1/CPU0     0x11     INFRA     FINAL    Active/Down     0xffffffff 
 DRP(1)   0/4/CPU0     0x41     INFRA     FINAL    Active/Down     0xffffffff 
 DRP(1)   0/4/CPU1     0x42     INFRA     FINAL    Active/Down     0xffffffff 
 LC(2)    0/6/CPU0     0x61     INFRA     FINAL    Active/Down     0xffffffff 
 RP(0)    0/RP0/CPU0   0x201    INFRA     FINAL    Active/Down     0x211      
 RP(0)    0/RP1/CPU0   0x211    INFRA     FINAL    Standby/Down    0x201      

Config Info for Node = node0_RP0_CPU0
LRd basic configuration data:
__________________________________________________
        node                : 0x201
        lr_id               : 0
        lr_name             : Owner
        dsc node            : 0x201
        dsc partner node    : 0x211
        dlrsc node          : 0x201
        dlrsc partner node  : 0x211
        am I dSC            : Yes
        am I STBY dSC       : NO
        am I dLRSC          : Yes
        am I STBY dLRSC     : NO
        primary node        : 0x201
        primary node1       : 0x211
        mcast addr          : 0x0
        mac addr            : 0x01563c0b00
__________________________________________________
         ADMIN CONFIG is APPLIED
__________________________________________________
lrd log file path is /net/node0_RP0_CPU0/tmp/lrd.log

------------LRD LOG START FOR NODE node0_RP0_CPU0------------

10/11 10:19:16.309 1 main: ---LRD starting---

10/11 10:19:16.325 1 main: **********LRD on Node=0x201**********

10/11 10:19:16.327 1 main: mutex init for inv_mutex DONE.

10/11 10:19:17.772 1 lrd_get_dsc: dSC = 201

10/11 10:19:17.774 1 main: We are dSC.

10/11 10:19:17.776 1 main: Registering with SSM as service provider. Once

-------------------------------------------------------------------------------
 
                             show tech-support lrd
 
-------------------------------------------------------------------------------
 
 
 
++++ lrdbg -I -1: lrd server inventory [17:21:35.603 UTC Fri Dec 18 2009] +++++
 
 
 
 
 
Success: node_count=8, ready=1
node=0x1(0/RSP0/CPU0), type=0, memsize=256, cpus=1, speed=100, sw_state=6, red_state=1 lr_name=Owner pd_card_type=0x100302, partner=0x11
node=0x11(0/RSP1/CPU0), type=0, memsize=256, cpus=1, speed=100, sw_state=6, red_state=2 lr_name=Owner pd_card_type=0x100302, partner=0x1
node=0x4a0(0/FT0/SP), type=5, memsize=256, cpus=1, speed=100, sw_state=1, red_state=0 lr_name=Owner pd_card_type=0x0
node=0x4b0(0/FT1/SP), type=5, memsize=256, cpus=1, speed=100, sw_state=1, red_state=0 lr_name=Owner pd_card_type=0x0
node=0x821(0/0/CPU0), type=2, memsize=256, cpus=1, speed=100, sw_state=6, red_state=0 lr_name=Owner pd_card_type=0x30207
node=0x841(0/2/CPU0), type=2, memsize=256, cpus=1, speed=100, sw_state=6, red_state=0 lr_name=Owner pd_card_type=0x30207
node=0x851(0/3/CPU0), type=2, memsize=256, cpus=1, speed=100, sw_state=0, red_state=0 lr_name=Owner pd_card_type=0x3020a
node=0xe10(0/PM1/SP), type=5, memsize=256, cpus=1, speed=100, sw_state=1, red_state=0 lr_name=Owner pd_card_type=0xf00188
 

---- lrdbg -I -1: lrd server inventory [17:21:36.023 UTC Fri Dec 18 2009] -----
 
 
 
+++ lrdbg -L local_node_lrd: local LR config info [17:21:36.215 UTC Fri Dec 18 2009] ++++
 
 
 
 
 
lrdbg 'i' getting CONFIG INFO
Starting lrdbg commands for node = 0/RSP0/CPU0
lrdbg: temp_node_name copied is 0/RSP0/CPU0
node_name = node0_RSP0_CPU0 chan_name = /net/node0_RSP0_CPU0/dev/lrd_local
user_nodeid=1 user_lrname = Owner
Local nodeid=1 Local lrname=Owner
User nodeid=1 User lrname = Owner User lrid=0
lrdbg: Successfully connected to channel /net/node0_RSP0_CPU0/dev/lrd_local
 
Starting lrdbg commands for node = node0_RSP0_CPU0 lrid = 0
 
DLRSC Info for Node = node0_RSP0_CPU0 Nodeid = 0x1 lrid = 0
We are the dLRSC, Backup dLRSC is 0x11
 
Inventory Info for Node = node0_RSP0_CPU0 lrid = 0
Success: node_count=5, ready=1
node=0x1(0/RSP0/CPU0), type=0, memsize=256, cpus=1, speed=100, sw_state=6, red_state=1 lr_name=Owner pd_card_type=0x100302, partner=0x11
node=0x11(0/RSP1/CPU0), type=0, memsize=256, cpus=1, speed=100, sw_state=6, red_state=2 lr_name=Owner pd_card_type=0x100302, partner=0x1
node=0x821(0/0/CPU0), type=2, memsize=256, cpus=1, speed=100, sw_state=6, red_state=0 lr_name=Owner pd_card_type=0x30207
node=0x841(0/2/CPU0), type=2, memsize=256, cpus=1, speed=100, sw_state=6, red_state=0 lr_name=Owner pd_card_type=0x30207
node=0x851(0/3/CPU0), type=2, memsize=256, cpus=1, speed=100, sw_state=0, red_state=0 lr_name=Owner pd_card_type=0x3020a
 
LR name Info for Node = node0_RSP0_CPU0
 
dSC node:         0/RSP0/CPU0
standby dSC node: 0/RSP1/CPU0
 
LRs (Configured, pre-existing) basic info:
 Name                                LRid  dLRSC         backup_dLRSC
---------------------------------------------------------------------
 Owner                               0     0/RSP0/CPU0   0/RSP1/CPU0
 
LRs (Configured, pre-existing) basic info:
Lr-Names             LRid dLRSC      StbydLRSC  Primary    Primary1   McastAddr  MacAddr
-----------------------------------------------------------------------------------------------
Owner                0    0/RSP0/CPU0 0/RSP1/CPU0 0/RSP0/CPU0 0/RSP1/CPU0 0          0211bfcfe7e
 
Client Vector for Node = node0_RSP0_CPU0
Received 25 currently connected lrd clients
 PID    op    eFLAGS    cFLAGS
_______________________________
  213071     0x40     0x1       0x0
  213090     0x1     0x4       0x3
  163876     0x11     0x204       0x1
  176173     0x10     0x200       0x0
  184381     0x1     0x4       0x1
  213089     0x2     0x0       0x0
  208966     0x23     0x84       0x1
  229494     0x1     0x4       0x1
  221289     0x1     0x4       0x1f
  241796     0x41     0x15       0x3
  245905     0x40     0x1       0x0
  245902     0x1     0x14       0x7
  245901     0x1     0x14       0x7
  237682     0x1     0x4       0x7
  237695     0x1     0x4       0x3
  245908     0x40     0x1       0x0
  245907     0x40     0x1       0x0
  213092     0x1     0x14       0x3
  254123     0x1     0x14       0x3
  254124     0x1     0x4       0x4
  262347     0x1     0x4       0x4
  262351     0x1     0x14       0x4
  270550     0x1     0x4       0x7
  254139     0x40     0x1       0x4
  270596     0x40     0x1       0x0
 
DLL loaded for Node = node0_RSP0_CPU0
  liblrd_dl_node_state_0.dll                   0.0
 liblrd_dl_sw_state_0.dll                     0.0
 liblrd_dl_fwd_ldr_0.dll                      0.0
 liblrd_alpha_fwd.dll                         1.0
 liblrd_envmon_fwd.dll                        1.0
 liblrd_invmgr_fwd.dll                        1.0
         dll name                        version
_________________________________________________
Node State Info for Node = node0_RSP0_CPU0
 
 Type     Node        Nodeid    Prev State        Cur State         LRid  (PD ctype) (old-lr-id)
 ---------------------------------------------------------------------------------
 RP(0)    0/RSP0/CPU0  0x1      RUNNING_MBI(5)    RUNNING_ENA(6)     0    (0x100302) (-1)
 RP(0)    0/RSP1/CPU0  0x11     RUNNING_MBI(5)    RUNNING_ENA(6)     0    (0x100302) (-1)
 LC(2)    0/0/CPU0     0x821    RUNNING_MBI(5)    RUNNING_ENA(6)     0    (0x30207) (-1)
 LC(2)    0/2/CPU0     0x841    RUNNING_MBI(5)    RUNNING_ENA(6)     0    (0x30207) (-1)
 LC(2)    0/3/CPU0     0x851    BRINGDOWN(7)      NOT_PRESENT(0)     0    (0x3020a) (-1)
 
Sw State Info for Node = node0_RSP0_CPU0
 
 -----------------------------------------------------------------------------------
 Type     Node        Nodeid  PrevState  CurState  Red-Role/       Partner   Pair
                               (BAND)     (BAND)   Red-State        node     name
 -----------------------------------------------------------------------------------
 RP(0)    0/RSP0/CPU0  0x1      INFRA     FINAL    Active/Down     0x11
 RP(0)    0/RSP1/CPU0  0x11     INFRA     FINAL    Standby/Down    0x1
 LC(2)    0/0/CPU0     0x821    INFRA     FINAL    Active/Down     0xffffffff
 LC(2)    0/2/CPU0     0x841    INFRA     FINAL    Active/Down     0xffffffff
 LC(2)    0/3/CPU0     0x851    INFRA     --       Unknown/Down    0xffffffff
 
Config Info for Node = node0_RSP0_CPU0
LRd basic configuration data:
__________________________________________________
        node                : 0x1
        lr_id               : 0
        lr_name             : Owner
        dsc node            : 0x1
        dsc partner node    : 0x11
        dlrsc node          : 0x1
        dlrsc partner node  : 0x11
        am I dSC            : Yes
        am I STBY dSC       : NO
        am I dLRSC          : Yes
        am I STBY dLRSC     : NO
        primary node        : 0x1
        primary node1       : 0x11
        mcast addr          : 0x0
        mac addr            : 0x0211bfcfe7e
__________________________________________________
         ADMIN CONFIG is APPLIED
__________________________________________________
 

--- lrdbg -L local_node_lrd: local LR config info [17:21:36.695 UTC Fri Dec 18 2009] ----
 
 
 
++++ lrd_show -I for this SDR-s DSDRSC [17:21:36.846 UTC Fri Dec 18 2009] +++++
 
Success: node_count=5, ready=1
node=0x1, type=0, memsize=256, cpus=1, speed=100, sw_state=6, red_state=1, lr_name=Owner, pd_card_type=0x100302, partner=0x11
node=0x11, type=0, memsize=256, cpus=1, speed=100, sw_state=6, red_state=2, lr_name=Owner, pd_card_type=0x100302, partner=0x1
node=0x821, type=2, memsize=256, cpus=1, speed=100, sw_state=6, red_state=0, lr_name=Owner, pd_card_type=0x30207
node=0x841, type=2, memsize=256, cpus=1, speed=100, sw_state=6, red_state=0, lr_name=Owner, pd_card_type=0x30207
node=0x851, type=2, memsize=256, cpus=1, speed=100, sw_state=0, red_state=0, lr_name=Owner, pd_card_type=0x3020a
 

---- lrd_show -I for this SDR-s DSDRSC [17:21:37.240 UTC Fri Dec 18 2009] -----
 
 
 
+++ lrdbg -n -1: lrd server node states [17:21:37.386 UTC Fri Dec 18 2009] ++++
 
 
 
 
 

 Type     Node        Nodeid    Prev State        Cur State         LRid  (PD ctype) (old-lr-id)
 ---------------------------------------------------------------------------------
 RP(0)    0/RSP0/CPU0  0x1      RUNNING_MBI(5)    RUNNING_ENA(6)     0    (0x100302) (-1)
 RP(0)    0/RSP1/CPU0  0x11     RUNNING_MBI(5)    RUNNING_ENA(6)     0    (0x100302) (-1)
 LC(2)    0/0/CPU0     0x821    RUNNING_MBI(5)    RUNNING_ENA(6)     0    (0x30207) (-1)
 LC(2)    0/2/CPU0     0x841    RUNNING_MBI(5)    RUNNING_ENA(6)     0    (0x30207) (-1)
 LC(2)    0/3/CPU0     0x851    BRINGDOWN(7)      NOT_PRESENT(0)     0    (0x3020a) (-1)
 
 
 
--- lrdbg -n -1: lrd server node states [17:21:37.766 UTC Fri Dec 18 2009] ----
 
 
 
+++ lrdbg -s -1: lrd server software states [17:21:37.914 UTC Fri Dec 18 2009] ++++
 
 
 
 
 

 -----------------------------------------------------------------------------------
 Type     Node        Nodeid  PrevState  CurState  Red-Role/       Partner   Pair
                               (BAND)     (BAND)   Red-State        node     name
 -----------------------------------------------------------------------------------
 RP(0)    0/RSP0/CPU0  0x1      INFRA     FINAL    Active/Down     0x11
 RP(0)    0/RSP1/CPU0  0x11     INFRA     FINAL    Standby/Down    0x1
 LC(2)    0/0/CPU0     0x821    INFRA     FINAL    Active/Down     0xffffffff
 LC(2)    0/2/CPU0     0x841    INFRA     FINAL    Active/Down     0xffffffff
 LC(2)    0/3/CPU0     0x851    INFRA     --       Unknown/Down    0xffffffff
 
 
 
--- lrdbg -s -1: lrd server software states [17:21:38.294 UTC Fri Dec 18 2009] ----
 
 
 
++++++++++ show ltrd-trace server [17:21:38.439 UTC Fri Dec 18 2009] ++++++++++
 
lrd_show_ltrace -F lrd/sntf -TP1
 
41 wrapping entries (1024 possible, 0 filtered, 41 total)
                                                                        Shelfmgr Notfs Rcvd:
                                               R/S/I       node_state    cardstate  adminpower adminshut
                                               ----------------------------------------------------------
Dec 14 11:19:58.255 lrd/sntf 0/RSP0/CPU0 t13 : 0/0/1       RUNNING_ENA          6         1         0
Dec 14 11:19:58.259 lrd/sntf 0/RSP0/CPU0 t13 : 0/132/1     PRESENT              1         1         0
Dec 14 11:19:58.264 lrd/sntf 0/RSP0/CPU0 t13 : 0/130/1     BOOTING              3         1         0
Dec 14 11:19:58.267 lrd/sntf 0/RSP0/CPU0 t13 : 0/75/0      PRESENT              1         1         0
Dec 14 11:19:58.268 lrd/sntf 0/RSP0/CPU0 t13 : 0/74/0      PRESENT              1         1         0
Dec 14 11:19:59.320 lrd/sntf 0/RSP0/CPU0 t13 : 0/1/1       RUNNING_MBI          5         1         0
Dec 14 11:19:59.335 lrd/sntf 0/RSP0/CPU0 t13 : 0/225/0     PRESENT              1         1         0
Dec 14 11:19:59.342 lrd/sntf 0/RSP0/CPU0 t13 : 0/132/1     BOOTING              3         1         0
Dec 14 11:19:59.354 lrd/sntf 0/RSP0/CPU0 t13 : 0/132/1     BOOTING              3         1         0
Dec 14 11:20:23.304 lrd/sntf 0/RSP0/CPU0 t13 : 0/130/1     MBI_BOOTING          4         1         0
Dec 14 11:20:23.314 lrd/sntf 0/RSP0/CPU0 t13 : 0/132/1     MBI_BOOTING          4         1         0
Dec 14 11:21:45.710 lrd/sntf 0/RSP0/CPU0 t13 : 0/130/1     RUNNING_MBI          5         1         0
Dec 14 11:21:46.237 lrd/sntf 0/RSP0/CPU0 t13 : 0/132/1     RUNNING_MBI          5         1         0
Dec 14 11:22:01.426 lrd/sntf 0/RSP0/CPU0 t13 : 0/1/1       RUNNING_ENA          6         1         0
Dec 14 11:23:21.504 lrd/sntf 0/RSP0/CPU0 t13 : 0/130/1     RUNNING_ENA          6         1         0
Dec 14 11:23:21.511 lrd/sntf 0/RSP0/CPU0 t13 : 0/132/1     RUNNING_ENA          6         1         0
Dec 14 15:42:37.504 lrd/sntf 0/RSP0/CPU0 t13 : 0/133/1     PRESENT              1         1         0
Dec 14 15:42:37.608 lrd/sntf 0/RSP0/CPU0 t13 : 0/133/1     BOOTING              3         1         0
Dec 14 15:42:37.614 lrd/sntf 0/RSP0/CPU0 t13 : 0/133/1     BOOTING              3         1         0
Dec 14 15:43:02.999 lrd/sntf 0/RSP0/CPU0 t13 : 0/133/1     MBI_BOOTING          4         1         0
Dec 14 15:43:48.408 lrd/sntf 0/RSP0/CPU0 t13 : 0/133/1     RUNNING_MBI          5         1         0
Dec 14 15:45:05.176 lrd/sntf 0/RSP0/CPU0 t13 : 0/133/1     RUNNING_ENA          6         1         0
Dec 15 14:53:15.444 lrd/sntf 0/RSP0/CPU0 t13 : 0/133/1     BRINGDOWN            7         1         0
Dec 15 14:53:15.461 lrd/sntf 0/RSP0/CPU0 t13 : 0/133/1     NOT_PRESENT          0         1         0
 

---------- show ltrd-trace server [17:21:38.840 UTC Fri Dec 18 2009] ----------
 
 
 
++++++++++ show ltrd-trace server [17:21:38.985 UTC Fri Dec 18 2009] ++++++++++
 
lrd_show_ltrace -F lrd/sntf -TP2
 
41 wrapping entries (1024 possible, 0 filtered, 41 total)
                                                                                Shelfmgr Notfs processed:
                                                        nodeid  o-LRid  LRid  o-state        n-state      pd-ctype  pi-ctype
                                                        ---------------------------------------------------------------------
Dec 14 11:19:58.261 lrd/sntf 0/RSP0/CPU0 t13 : 0/2/CPU0   (0x841)     0     0  NOT_PRESENT   PRESENT         0x0       UNKN
Dec 14 11:19:58.265 lrd/sntf 0/RSP0/CPU0 t13 : 0/0/CPU0   (0x821)     0     0  NOT_PRESENT   BOOTING         0x0       UNKN
Dec 14 11:19:58.268 lrd/sntf 0/RSP0/CPU0 t13 : 0/FT1/SP   (0x4b0)    -1    -1  NOT_PRESENT   PRESENT         0x0       UNKN
Dec 14 11:19:58.269 lrd/sntf 0/RSP0/CPU0 t13 : 0/FT0/SP   (0x4a0)    -1    -1  NOT_PRESENT   PRESENT         0x0       UNKN
Dec 14 11:19:59.327 lrd/sntf 0/RSP0/CPU0 t13 : 0/RSP1/CPU0(0x11 )     0     0  NOT_PRESENT   RUNNING_MBI     0x100000  RP
Dec 14 11:19:59.341 lrd/sntf 0/RSP0/CPU0 t13 : 0/PM1/SP   (0xe10)    -1    -1  NOT_PRESENT   PRESENT         0xf00188  UNKN
Dec 14 11:19:59.345 lrd/sntf 0/RSP0/CPU0 t13 : 0/2/CPU0   (0x841)     0     0  PRESENT       BOOTING         0x0       UNKN
Dec 14 11:20:23.306 lrd/sntf 0/RSP0/CPU0 t13 : 0/0/CPU0   (0x821)     0     0  BOOTING       MBI_BOOTING     0x30207   LC
Dec 14 11:20:23.316 lrd/sntf 0/RSP0/CPU0 t13 : 0/2/CPU0   (0x841)     0     0  BOOTING       MBI_BOOTING     0x30207   LC
Dec 14 11:21:45.711 lrd/sntf 0/RSP0/CPU0 t13 : 0/0/CPU0   (0x821)     0     0  MBI_BOOTING   RUNNING_MBI     0x30207   LC
Dec 14 11:21:46.239 lrd/sntf 0/RSP0/CPU0 t13 : 0/2/CPU0   (0x841)     0     0  MBI_BOOTING   RUNNING_MBI     0x30207   LC
Dec 14 15:42:37.508 lrd/sntf 0/RSP0/CPU0 t13 : 0/3/CPU0   (0x851)     0     0  NOT_PRESENT   PRESENT         0x0       UNKN
Dec 14 15:42:37.609 lrd/sntf 0/RSP0/CPU0 t13 : 0/3/CPU0   (0x851)     0     0  PRESENT       BOOTING         0x0       UNKN
Dec 14 15:43:03.000 lrd/sntf 0/RSP0/CPU0 t13 : 0/3/CPU0   (0x851)     0     0  BOOTING       MBI_BOOTING     0x3020a   LC
Dec 14 15:43:48.409 lrd/sntf 0/RSP0/CPU0 t13 : 0/3/CPU0   (0x851)     0     0  MBI_BOOTING   RUNNING_MBI     0x3020a   LC
Dec 15 14:53:15.447 lrd/sntf 0/RSP0/CPU0 t13 : 0/3/CPU0   (0x851)     0     0  RUNNING_ENA   BRINGDOWN       0x3020a   LC
Dec 15 14:53:15.462 lrd/sntf 0/RSP0/CPU0 t13 : 0/3/CPU0   (0x851)     0     0  BRINGDOWN     NOT_PRESENT     0x3020a   LC
 

---------- show ltrd-trace server [17:21:39.392 UTC Fri Dec 18 2009] ----------
 
 
 
++++++++++ show ltrd-trace server [17:21:39.548 UTC Fri Dec 18 2009] ++++++++++
 
lrd_show_ltrace -F lrd/sreg -TP1
 
29 wrapping entries (64 possible, 0 filtered, 29 total)
                                                                Client New Registrations:
                                              jid     pid     Msg-op                 Event-flags   Card-flags
                                            ------------------------------------------------------------------
Dec 14 11:19:47.723 lrd/sreg 0/RSP0/CPU0 t15 : 389     213071  DLRSC                  dlrsc-state   Unknwn
Dec 14 11:19:47.725 lrd/sreg 0/RSP0/CPU0 t15 : 406     213090  Node State             card-state   RP DRP
Dec 14 11:19:47.727 lrd/sreg 0/RSP0/CPU0 t15 : 95      163876  Pri LR                 Unknwn      Unknwn
Dec 14 11:19:47.731 lrd/sreg 0/RSP0/CPU0 t15 : 168     176173  Pri LR                 Unknwn      Unknwn
Dec 14 11:19:47.739 lrd/sreg 0/RSP0/CPU0 t15 : 404     184381  Node State             card-state   RP
Dec 14 11:19:47.746 lrd/sreg 0/RSP0/CPU0 t15 : 283     213089  LR Crt/Del             Unknwn      Unknwn
Dec 14 11:19:47.755 lrd/sreg 0/RSP0/CPU0 t15 : 225     208966  Node State             card-state   RP
Dec 14 11:19:55.671 lrd/sreg 0/RSP0/CPU0 t15 : 226     229494  Node State             card-state   RP
Dec 14 11:19:56.522 lrd/sreg 0/RSP0/CPU0 t15 : 335     221289  Node State             card-state   RP DRP LC Other
Dec 14 11:20:00.929 lrd/sreg 0/RSP0/CPU0 t15 : 348     241796  DLRSC                  dlrsc-state   Unknwn
Dec 14 11:20:02.842 lrd/sreg 0/RSP0/CPU0 t15 : 245     245905  DLRSC                  dlrsc-state   Unknwn
Dec 14 11:20:04.054 lrd/sreg 0/RSP0/CPU0 t15 : 256     245902  Node State             card-state sw-state   RP DRP LC
Dec 14 11:20:04.054 lrd/sreg 0/RSP0/CPU0 t15 : 241     245901  Node State             card-state sw-state   RP DRP LC
Dec 14 11:20:04.699 lrd/sreg 0/RSP0/CPU0 t15 : 219     237682  Node State             card-state   RP DRP LC
Dec 14 11:20:09.686 lrd/sreg 0/RSP0/CPU0 t15 : 289     237695  Node State             card-state   RP DRP
Dec 14 11:20:09.904 lrd/sreg 0/RSP0/CPU0 t15 : 246     245908  DLRSC                  dlrsc-state   Unknwn
Dec 14 11:20:11.607 lrd/sreg 0/RSP0/CPU0 t15 : 266     245907  DLRSC                  dlrsc-state   Unknwn
Dec 14 11:20:15.748 lrd/sreg 0/RSP0/CPU0 t15 : 155     213092  Node State             card-state sw-state   RP DRP
Dec 14 11:20:20.401 lrd/sreg 0/RSP0/CPU0 t15 : 341     254123  Node State             card-state sw-state   RP DRP
Dec 14 11:20:24.754 lrd/sreg 0/RSP0/CPU0 t15 : 278     254124  Node State             card-state   LC
Dec 14 11:20:29.079 lrd/sreg 0/RSP0/CPU0 t15 : 144     262347  Node State             card-state   LC
Dec 14 11:20:33.883 lrd/sreg 0/RSP0/CPU0 t15 : 342     262351  Node State             card-state sw-state   LC
Dec 14 11:20:34.194 lrd/sreg 0/RSP0/CPU0 t15 : 181     270550  Node State             card-state   RP DRP LC
Dec 14 11:20:36.280 lrd/sreg 0/RSP0/CPU0 t15 : 312     254139  DLRSC                  dlrsc-state   LC
Dec 14 11:20:53.951 lrd/sreg 0/RSP0/CPU0 t15 : 398     270596  DLRSC                  dlrsc-state   Unknwn
 

---------- show ltrd-trace server [17:21:40.125 UTC Fri Dec 18 2009] ----------
 
 
 
++++++++++ show ltrd-trace server [17:21:40.326 UTC Fri Dec 18 2009] ++++++++++
 
lrd_show_ltrace -F lrd/sreg -TP2
 
29 wrapping entries (64 possible, 0 filtered, 29 total)
                                                                Client re-Registrations:
                                              jid     pid     Curr-msg-op          New-Msg-op       Event-flags     Card-flags
                                            -----------------------------------------------------------------------------------
Dec 14 11:19:47.757 lrd/sreg 0/RSP0/CPU0 t15 : 95      163876  Pri LR               Node State         Unknwn      Unknwn    
Dec 14 11:20:00.940 lrd/sreg 0/RSP0/CPU0 t15 : 348     241796  DLRSC                Node State         dlrsc-state   Unknwn  
Dec 14 11:20:46.317 lrd/sreg 0/RSP0/CPU0 t15 : 225     208966  Node State           LR Crt/Del         card-state   RP       
Dec 14 11:20:46.317 lrd/sreg 0/RSP0/CPU0 t15 : 225     208966  unknwn               DLSRC Down         card-state   RP       
 

---------- show ltrd-trace server [17:21:40.774 UTC Fri Dec 18 2009] ----------
 
 
 
++++++++++ show ltrd-trace server [17:21:40.994 UTC Fri Dec 18 2009] ++++++++++
 
No messages to display
lrd_show_ltrace -F lrd/sdwn -TP1
 
 
 
---------- show ltrd-trace server [17:21:41.511 UTC Fri Dec 18 2009] ----------
 
 
 
++++++++++ show ltrd-trace server [17:21:41.653 UTC Fri Dec 18 2009] ++++++++++
 
No messages to display
lrd_show_ltrace -F lrd/sdwn -TP2
 
 
 
---------- show ltrd-trace server [17:21:42.014 UTC Fri Dec 18 2009] ----------
 
 
 
++++++++++ show ltrd-trace server [17:21:42.150 UTC Fri Dec 18 2009] ++++++++++
 
lrd_show_ltrace -F lrd/supd -TP1
 
20 wrapping entries (1024 possible, 0 filtered, 20 total)
                                                                SW updates sent:
                                                nodeid           o-state       n-state     red-role      partner    pi-ctype   LRid
                                                ------------------------------------------------------------------------------------
Dec 14 11:19:47.645 lrd/supd 0/RSP0/CPU0 t3  : 0/RSP0/CPU0(0x1  )  NO STATE     ARB BAND     Active        0x11        RP    0
Dec 14 11:19:56.368 lrd/supd 0/RSP0/CPU0 t4  : 0/RSP0/CPU0(0x1  )  ARB BAND     ADMIN BAND   Active        0x11        RP    0
Dec 14 11:20:18.381 lrd/supd 0/RSP0/CPU0 t1  : 0/RSP0/CPU0(0x1  )  ADMIN BAND   INFRA BAND   Active        0x11        RP    0
Dec 14 11:20:54.823 lrd/supd 0/RSP0/CPU0 t4  : 0/RSP0/CPU0(0x1  )  INFRA BAND   FINAL BAND   Active        0x11        RP    0

show tech-support mpls ldp

To automatically run show commands that display information specific to Multiprotocol Label Switching (MPLS) Label Distribution Protocol (LDP) debugging, use the show tech-support mpls ldp command in EXEC mode.

show tech-support mpls ldp { file send-to [background] [ compressed | uncompressed ] | terminal [page] | location node-id }

Syntax Description

file

Specifies that the command output is saved to a specified file.

send-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • disk0: filename
  • disk0a: filename
  • disk1: filename
  • disk1a: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • harddiskb: filename
  • nvram: filename
  • rcp: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

terminal

Specifies that the command output is displayed on the terminal.

page

(Optional) Specifies that the command output is displayed one page at a time. Use the return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl+C keys to stop the command output.

location

node-id

(Optional) Specifies a node. The node-id argument is entered in the rack/slot/module notation.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


This command generates LDP debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router.


Note


This command is not required during normal use of the router.


See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

cisco-support

read

mpls-ldp

read

show tech-support mpls rsvp

To automatically run show commands that display information specific to Multiprotocol Label Switching (MPLS) Resource Reservation Protocol (RSVP) debugging, use the show tech-support mpls rsvp command in EXEC mode.

show tech-support mpls rsvp { terminal [page] | file send-to [background] [ compressed | uncompressed ] }

Syntax Description

terminal

Displays the command output on the terminal.

page

(Optional) Displays the command output on a single page at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl-C keys to stop the command output.

file

Specifies that the command output is saved to a specified file.

sent-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • disk0: filename
  • disk1: filename
  • flash: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • nvram: filename
  • rcp: filename
  • slot0: filename
  • slot1: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

Command Default

The command output is not compressed.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support mpls command to run show commands that display information specific to MPLS RSVP debugging. This command generates RSVP debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.


Note


This command is not required during normal use of the router.


The following show commands run automatically when you run the show tech-support mpls rsvp command:

  • show rsvp interface detail
  • show rsvp counters pak
  • show rsvp counters handles
  • show rsvp counters database private
  • show rsvp counters messages private
  • show rsvp counters memory
  • show rsvp counters events
  • show rsvp counters notifications-client
  • show rsvp counters request
  • show rsvp counters destroy-reasons
  • show rsvp counters policy
  • show rsvp graceful-restart
  • show rsvp fast-reroute summary
  • show rsvp graceful-restart neighbors detail
  • show rsvp hello instance detail
  • show rsvp sender detail
  • show rsvp reservation detail
  • show rsvp request detail
  • show rsvp session detail
  • show rsvp authentication
  • show rsvp sender private
  • show rsvp reservation private
  • show rsvp request private
  • show rsvp interface private
  • show rsvp installed private
  • show rsvp trace events
  • show rsvp trace default
  • show rsvp trace buffer
  • show rsvp trace interface
  • show rsvp trace errors
  • show rsvp trace client
  • show rsvp debug-error

See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

cisco-support

read

mpls-te or ouni

read

Examples

The following example shows some of the show tech-support mpls rsvp command output:

RP/0/RSP0/CPU0:router# show tech-support mpls rsvp terminal page 

-------------------------------------------------------------------------------

            show tech-support mpls rsvp (Detail with Event traces)             

-------------------------------------------------------------------------------


------------------------- show rsvp interface detail --------------------------
INTERFACE: GigE0/1/0/0 (ifh=0x1180060).
 VRF ID: 0x0 (Default).
 BW (bits/sec): Max=1230M. MaxFlow=1230M.
                Allocated=0 (0%). MaxSub=0.
 Signalling: No DSCP marking. No rate limiting.
 States in: 0. Max missed msgs: 4.
 Expiry timer: Not running. Refresh interval: 45s.
 Normal Refresh timer: Not running. Summary refresh timer: Not running.
 Refresh reduction local: Enabled. Summary Refresh: Enabled (4096 bytes max).

 Reliable summary refresh: Disabled. Bundling: Enabled. (4096 bytes max).
 Ack hold: 400 ms, Ack max size: 4096 bytes. Retransmit: 900ms.


--------------------------- show rsvp counters pak ----------------------------
Number of pak TX=0
Number of pak events received from raw=1
Number of spurious events received from raw=1
Number of packets received from raw=0
Number of errored drops=0
Authentication queue:
    Number of enqueues=0
    Number of drops due to max q size=0
    High water mark=0
    Current queue size=0
High priority queue:
    Number of enqueues=0
    Number of drops due to max q size=0
    High water mark=0
    Current queue size=0
Low priority queue:
    Number of enqueues=0
    Number of drops due to max q size=0
    High water mark=0
    Current queue size=0


------------------------- show rsvp counters handles --------------------------

         All allocated handles:     5
    Unallocated cached handles:  1019
                               -------
                  LXSB handles:     1
                   ISB handles:     2
                    KI handles:     1
                               -------
  Total handles ever allocated:     5
      Total handles ever freed:     0


--------------------- show rsvp counters database private ---------------------

                                 Sessions: 0
       Locally created and incoming Paths: 0
                           Outgoing Paths: 0
Locally created and incoming Reservations: 0
                    Outgoing Reservations: 0
                               Interfaces: 2
                                Installed: 0
                            New LSP count: 0
                      Refreshed LSP count: 0
      LSP count recovered from checkpoint: 0
                            Proxy Senders: 0
                       Proxy Reservations: 0
                          Proxy Listeners: 1
                           TMB allocation: 0
                             Local Routes: 22


--------------------- show rsvp counters messages private ---------------------
 Routed                 Recv     Xmit                        Recv     Xmit
    Path                            0    Resv                            0
    PathError                       0    ResvError                       0
    PathTear                        0    ResvTear                        0
    ResvConfirm                     0    Hello                           0
    Ack                             0    SRefresh                        0
    Challenge                       0    ChallengeRsp                    0
    Retransmit                      0    Rate Limited                    0
    OutOfOrder                       
    Bundle                          0    AckSubmsg                       0
    PathSubmsg                      0    ResvSubmsg                      0
    PathTearSubmsg                  0    ResvTearSubmsg                  0
    PathErrorSubmsg                 0    ResvErrorSubmsg                 0
    PathQuery                       0

 POS0/1/0/0             Recv     Xmit                        Recv     Xmit
    Path                   0        0    Resv                   0        0
    PathError              0        0    ResvError              0        0
    PathTear               0        0    ResvTear               0        0
    ResvConfirm            0        0    Hello                  0        0
    Ack                    0        0    SRefresh               0        0
    Challenge              0        0    ChallengeRsp           0        0
    Retransmit                      0    Rate Limited                    0
    OutOfOrder             0         
    Bundle                 0        0    AckSubmsg              0        0
    PathSubmsg             0        0    ResvSubmsg             0        0
    PathTearSubmsg         0        0    ResvTearSubmsg         0        0
    PathErrorSubmsg        0        0    ResvErrorSubmsg        0        0
    PathQuery              0        0

 All RSVP Interfaces    Recv     Xmit                        Recv     Xmit
    Path                   0        0    Resv                   0        0
    PathError              0        0    ResvError              0        0
    PathTear               0        0    ResvTear               0        0
    ResvConfirm            0        0    Hello                  0        0
    Ack                    0        0    SRefresh               0        0
    Challenge              0        0    ChallengeRsp           0        0
    Retransmit                      0    Rate Limited                    0
    OutOfOrder             0         
    Bundle                 0        0    AckSubmsg              0        0
    PathSubmsg             0        0    ResvSubmsg             0        0
    PathTearSubmsg         0        0    ResvTearSubmsg         0        0
    PathErrorSubmsg        0        0    ResvErrorSubmsg        0        0
    PathQuery              0        0


-------------------------- show rsvp counters memory --------------------------
Pool size  Count     
---------- ----------
32                  0
48                  0
96                  0
128                 0
192                 0
256                 0
Dynamic             0

-------------------------- show rsvp counters events --------------------------
POS0/1/0/0                              All RSVP Interfaces                     
 Expired Path states           0         Expired Path states           0        
 Expired Resv states           0         Expired Resv states           0        
 NACKs received                0         NACKs received                0        

------------------- show rsvp counters notifications-client -------------------
Total notifications                     Total filtered notifications            
 Path delete                          0  Path delete                          0 
 Path error                           0  Path error                           0 
 Path change                          0  Path change                          0 
 Matching Resv create                 0  Matching Resv create                 0 
 Matching Resv change                 0  Matching Resv change                 0 
 Matching Resv delete                 0  Matching Resv delete                 0 
 Async Path create                    0  Async Path create                    0 
 Resv delete                          0  Resv delete                          0 
 Resv error                           0  Resv error                           0 
 Resv confirm                         0  Resv confirm                         0 
 Async Resv create                    0  Async Resv create                    0 
 Listener Path create                 0  Listener Path create                 0 
 Listener Path change                 0  Listener Path change                 0 
 Listener Path delete                 0  Listener Path delete                 0 
 Listener Path FRR                    0  Listener Path FRR                    0 
 Listener Assign Backup err           0  Listener Assign Backup err           0 
 Listener Resv create                 0  Listener Resv create                 0 
 Listener Resv change                 0  Listener Resv change                 0 
 Listener Resv delete                 0  Listener Resv delete                 0 
 Restart Time                         0  Restart Time                         0 
 Recovery Done                        0  Recovery Done                        0 

show tech-support mpls traffic-eng

To automatically run show commands that display information specific to Multiprotocol Label Switching (MPLS) Traffic Engineering (TE) debugging, use the show tech-support mpls traffic-eng command in EXEC mode.

show tech-support mpls traffic-eng { terminal [page] | file send-to [background] [ compressed | uncompressed ] } [ forwarding tunnel-name tunnel name ] [ tunnel-number number ]

Syntax Description

file

Specifies that the command output is saved to a specified file.

send-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • disk0: filename
  • disk0a: filename
  • disk1: filename
  • disk1a: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • harddiskb: filename
  • nvram: filename
  • rcp: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

forwarding

(Optional) Displays forwarding information for a tunnel.

tunnel-name

Specifies the tunnel name that is used by the RSVP process.

tunnel name

Name for the tunnel.

terminal

Specifies that the command output is displayed on the terminal.

page

(Optional) Specifies that the command output is displayed one page at a time. Use the return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl+C keys to stop the command output.

tunnel-number

(Optional) Specifies the tunnel number that is used by the RSVP process.

number

(Optional) Number for the tunnel. The range is from 0 to 65535.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


This command generates MPLS-TE information that can be useful for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.


Note


This command is not required during normal use of the router.


See the Cisco IOS XR Software command references for information about these commands and descriptions of their command output. The Cisco IOS XR Software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

cisco-support

read

mpls-te

read

Examples

The following example shows some of the show tech-support mpls traffic-eng command output that is displayed on the terminal:

RP/0/RSP0/CPU0:router# show tech-support mpls traffic-eng terminal page 

-------------------------------------------------------------------------------

                      show tech-support mpls traffic-eng                       

-------------------------------------------------------------------------------


-------------------- show mpls traffic-eng tunnels summary --------------------
Signalling Summary:
              LSP Tunnels Process:  running
                     RSVP Process:  running
                       Forwarding:  enabled
    Head: 0 interfaces, 0 active signalling attempts, 0 established
          0 explicit, 0 dynamic
          0 activations, 0 deactivations
          0 recovering, 0 recovered
    Mids: 2
    Tails: 0
          Periodic reoptimization:  every 3600 seconds, next in 2703 seconds
           Periodic FRR Promotion:  every 300 seconds, next in 106 seconds
      Periodic auto-bw collection:  disabled
          
Fast ReRoute Summary:
    Head:     0 FRR tunnels, 0 protected, 0 rerouted
    Mid:      0 FRR tunnels, 0 protected, 0 rerouted
    Summary:  0 protected, 0 link protected, 0 node protected, 0 bw protected
    Backup:   0 tunnels, 0 assigned
    Interface: 0 protected, 0 rerouted

--------------- show mpls traffic-eng counters tunnels summary ----------------
 Head:                     Mid:                       Tail:
  Total:                 0 Total:                   8 Total:                   0
  Sender Create:         0 Path Create:             2 Path Create:             0
  Sender Modify:         0 Path Change:             0 Path Change:             0
  Sender Delete:         0 Path Delete:             0 Path Delete:             0
  RESV Create:           0 Receiver Create:         2 Receiver Create:         0
  RESV Change:           0 Receiver Modify:         0 Receiver Modify:         0
  RESV Delete:           0 Receiver Delete:         0 Receiver Delete:         0
  Path Delete:           0 RESV Create:             2 RESV Create:             0
  Path Error:            0 RESV Delete:             0 RESV Delete:             0
  Path Change:           0 RESV Change:             0 RESV Change:             0
  Path Create:           0 Sender Create:           2 RESV Error:              0
  RESV Confirm:          0 Sender Modify:           0
                           Sender Delete            0
  Other:                 0 Other:                   0 Other:                   0

-------------------- show mpls traffic-eng counters batch ---------------------
Messages   Batches   MinSize   MaxSize   AverageSize   Description
--------   -------   -------   -------   -----------   -----------
0          0         0         0         0             IF CREATE
0          0         0         0         0             CAPS ADD
0          0         0         0         0             MTU UPDATE
0          0         0         0         0             STATE UPDATE
0          0         0         0         0             IF REPLICATE
0          0         0         0         0             IF DEL CONFIRM
0          0         0         0         0             IF DELETE
25         23        1         2         1             NOTFN from IM
4          2         2         2         2             MESSAGE to RSVP
9          6         1         2         1             MESSAGES from RSVP
0          0         0         0         0             MESSAGES to IGP
0          0         0         0         0             SYSDB VRFNs
0          0         0         0         0             SYSDB APPLYs
2          1         2         2         2             MESSAGE to LSD
2          2         2         2         1             MESSAGES from LSD
12         6         1         6         2             MESSAGES to IPARM

---------- show mpls traffic-eng link-management statistics summary -----------
          
  LSP Admission Statistics::

         Setup    Setup    Setup    Setup    Tear     Tear     Tear    
         Requests Admits   Rejects  Errors   Requests Preempts Errors  
         -------- -------- -------- -------- -------- -------- --------
    Path        2        2        0        0        0        0        0
    Resv        2        2        0        0        0        0        0


---------------- show mpls traffic-eng link-management summary ----------------

  System Information::
      Links Count         : 6 (Maximum Links Supported 100) 
      Flooding System     : enabled
      IGP Areas Count     : 1

  IGP Areas 
  ----------

  IGP Area[1]:: OSPF 100 area 0
      Flooding Protocol   : OSPF
      Flooding Status     : flooded
 --More--  Zero Nodes Found.
      Periodic Flooding   : enabled (every 180 seconds)
      Flooded Links       : 6
      IGP System ID       : 10.1.1.1
      MPLS TE Router ID   : 10.1.1.1
      IGP Neighbors       : 6


------------- show mpls traffic-eng fast-reroute database summary -------------
Status     Count     
---------- ----------
Active     0
Ready      0
Partial    0

------------------------ show mpls forwarding summary -------------------------
Forwarding entries:
   Label switching: 60
   MPLS TE tunnel head: 0
   MPLS TE fast-reroute: 0 via 0 protected next-hops
   MPLS TE internal: 0
Forwarding updates:
   392 updates, 37 messages
Labels in use:
   Reserved: 3
   Lowest: 0
   Highest: 16059
   Deleted stale label entries: 0

Pkt drops=0, fragm=0, fail_look=0

Pkts dropped:    0
Pkts fragmented: 0
Failed lookups:  0

----------------------- show cef drop location 0/0/cpu0 -----------------------
CEF Drop Statistics

----------------------- show cef drop location 0/1/cpu0 -----------------------
CEF Drop Statistics
Node: 0/1/CPU0
  Unresolved drops     packets :               0
  Unsupported drops    packets :               0
  Null0 drops          packets :               0
  No route drops       packets :               0
  No Adjacency drops   packets :               0
  Checksum error drops packets :               0

show tech-support multicast

To automatically run show commands that display information specific to multicast-related information, use the show tech-support multicast command in EXEC mode.

show tech-support multicast [ address-family | classic ] [ group group-address ] { terminal [page] | file send-to } [ background | compressed | uncompressed ] [ source source address ] [ location node-id ] [rack] [ vrf vrf-name ]

Syntax Description

address-family

(Optional) Collects address family specific information. It can be either ipv4 or ipv6.

classic

(Optional) Retrieves multicast related information using the non-fast method.

group

(Optional) Specifies the multicast group address.

group-address

(Optional) Address or name of the multicast group. An address is a multicast IP address in four-part dotted-decimal notation. A name is as defined in the Domain Name System (DNS) hosts table.

terminal

(Optional) Displays the command output on the terminal.

page

(Optional) Displays the command output on a single page at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

file

(Optional) Specifies that the command output is saved to a specified file.

sent-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • disk0: filename
  • disk0a: filename
  • disk1: filename
  • disk1a: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • harddiskb: filename
  • nvram: filename
  • rcp: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

source

(Optional) Displays the multicast source address.

source address

(Optional) Source address for multicast.

location node-id

(Optional) Specifies a node. The node-id argument is entered in the rack/slot/module notation.

rack

(Optional) Displays the list of racks.

vrf

(Optional) Specifies a VPN routing and forwarding (VRF) instance.

vrf-name

Name of VRF.

Command Default

Output is logged to the terminal screen.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support multicast command to run show commands that display information specific to multicast-related information for PIM, IGMP, and mcast. This command generates multicast information that can be useful for Cisco Technical Support representatives when troubleshooting a router.


Note


This command is not required during normal use of the router.


The following show commands run automatically when you run the show tech-support multicast command:
  • show version
  • show running-config
  • show ip interface brief
  • show install
  • show processes aborts location all
  • show processes blocked location all
  • show context location all
  • show memory summary location all
  • show ip access-lists show ip mhost default-interface
  • show msdp summary
  • show msdp globals
  • show msdp sa-cache summary
  • show msdp statistics peer
  • show pim group-map
  • show pim topology route-count
  • show pim topology ip-address
  • show pim rpf count
  • show pim rpf
  • show pim traffic
  • show pim join-prune statistic
  • show pim interface state-on
  • show pim tunnel info all
  • show pim neighbor
  • show pim nsf
  • show pim summary
  • show igmp groups summary
  • show igmp groups group-address
  • show igmp interface
  • show igmp traffic
  • show igmp nsf
  • show igmp summary
  • show mrib client filter
  • show mrib route summary
  • show mrib route source-address
  • show mrib nsf
  • show cef ipv4 prefix location node-id
  • show mfib route summary location node-id
  • show mfib route source-address location node-id
  • show mfib counter location node-id
  • show mfib nsf location node-id
  • show mfib hardware route mofrr location node-id
  • show mfib hardware route olist detail source-address location node-id
  • show mfib hardware interface detail location node-id
  • show mfib hardware route statistics source-address location node-id
  • show mfib hardware resource-counter location node-id
  • show mfib hardware adjacency detail location node-id
  • show mfib hardware route accept-bitmap detail source-address location node-id

See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

basic-services or cisco-support

read

multicast

read

show tech-support netflow

To automatically run show commands that display information specific to netflow debugging, use the show tech-support netflow command in EXEC mode.

show tech-support netflow [ file send-to [background] [ compressed | uncompressed ] ] [ location node-id ] [rack]

Syntax Description

file

Specifies that the command output is saved to a specified file.

send-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • disk0: filename
  • disk0a: filename
  • disk1: filename
  • disk1a: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • harddiskb: filename
  • nvram: filename
  • rcp: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

location node-id

(Optional) Specifies a node. The node-id argument is entered in the rack/slot/module notation.

rack

(Optional) Displays the list of racks.

Command Modes

EXEC

Command History

Release

Modification

Release 3.9.0

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


This command generates netflow debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router.


Note


This command is not required during normal use of the router.


See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

cisco-support

read

show tech-support nrs

To automatically run show commands that display information specific to the name registration service (NRS) information, use the show tech-support nrs command in EXEC mode.

show tech-support nrs [ file send-to [ background | compressed | uncompressed ] | terminal [page] [rack] | ]

Syntax Description

file

Specifies that the command output is saved to a specified file.

send-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • disk0: filename
  • disk0a: filename
  • disk1: filename
  • disk1a: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • harddiskb: filename
  • nvram: filename
  • rcp: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

terminal

Specifies that the command output is displayed on the terminal.

page

(Optional) Specifies that the command output is displayed one page at a time. Use the return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl+C keys to stop the command output.

rack

(Optional) Displays the list of racks.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support nrs command to collect data for the NRS. The NRS is a central registration authority and is used by the Replication Data Services (RDS) and the Event Notification Services (ENS). This command generates NRS debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router.


Note


This command is not required during normal use of the router.


See the Cisco IOS XR Software command references for information about these commands and descriptions of their command output. The Cisco IOS XR Software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

cisco-support

read

show tech-support password

To automatically run show commands that display information to include the password in the output for debugging, use the show tech-support password command in EXEC mode.

show tech-support password [ file send-to [background] [ compressed | uncompressed ] ] [ location node-id ] [ terminal [page] ]

Syntax Description

file

Specifies that the command output is saved to a specified file.

send-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • disk0: filename
  • disk0a: filename
  • disk1: filename
  • disk1a: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • harddiskb: filename
  • nvram: filename
  • rcp: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

terminal

Specifies that the command output is displayed on the terminal.

page

(Optional) Specifies that the command output is displayed one page at a time. Use the return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl+C keys to stop the command output.

locationnode-id

(Optional) Specifies a node. The node-id argument is entered in the rack/slot/module notation.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Release 5.0.0

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


This command generates output to include the password for debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router.


Note


This command is not required during normal use of the router.


See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

basic-services

read

show tech-support performance-traffic

To automatically run show commands that display information specific to video monitoring, use the show tech-support performance-traffic command in EXEC mode.

show tech-support performance-traffic file send-to [ background | compressed | uncompressed ] [ location { node-id | rack rack-id } ]

Syntax Description

performance-traffic

Specifies that the keyword to collect video monitoring support information. This is mandatory.

file

Specifies that the command output is saved to a specified file.

send-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • disk0: filename
  • disk0a: filename
  • disk1: filename
  • disk1a: filename
  • flash: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • harddiskb: filename
  • nvram: filename
  • rcp: filename
  • slot0: filename
  • slot1: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

location

(Optional) Specifies a node.

node-id

(Optional) Node ID. The node-id argument is entered in the rack/slot/module notation.

rack

(Optional) Specifies a list of racks.

rack-id

(Optional) Specifies the rack id.

Command Default

If the location is not specified, the tech-support information is collected from all the nodes by default. If file is specified, the command is run in the back ground and the output is compressed by default..

Command Modes

EXEC

Command History

Release

Modification

Release 3.9.0

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

The following show commands run automatically when you run the show tech-support performance-traffic command:

  • show install package all detail
  • show logging
  • show interfaces summary
  • show interfaces brief
  • show running-config
  • show policymap targets type performance-traffic
  • show policymgr process trace all location all
  • show policy-lib trace all location all
  • show afmon-lib trace client afmon_ea both location all
  • show afmon-ma trace location all
  • show app-obj trace location all
  • show im database brief location
  • show app-obj db afmon_ma_intf_db proc afmon_ma location
  • show process blocked location
  • show processes afmon_ma
  • show processes afmon_ma location
  • show app-obj db policy_map_afmon_db proc afmon_ea location
  • show app-obj db class_map_afmon_db proc afmon_ea location
  • show processes afmon_ea location
  • show performance traffic platform flow all-entries detail location
  • show performance traffic platform flow summary location
  • show performance traffic platform resource-counters location
  • show performance traffic platform ha chkpt all info location
  • show performance traffic platform ha state location
  • show performance traffic platform trace all location

See the Cisco IOS XR Software command references for information about these commands and descriptions of their command output. The Cisco IOS XR Software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

cisco-support

read

Examples

The following example shows how to run the show tech-support performance-traffic command on the router:

RP/0/RSP0/CPU0:router# show tech-support performance-traffic location 0/1/cpu0

show tech-support pfi

To automatically run show commands that display information specific to Packet Forwarding Infrastructure (PFI) debugging for all components, use the show tech-support pfi command in EXEC mode.

show tech-support pfi { file send-to [ background | compressed | uncompressed ] | terminal [page] | trace-only } [ location { node-id | all } ]

Syntax Description

file

Specifies that the command output is saved to a specified file.

send-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • disk0: filename
  • disk0a: filename
  • disk1: filename
  • disk1a: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • harddiskb: filename
  • nvram: filename
  • rcp: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

terminal

Specifies that the command output is displayed on the terminal.

page

(Optional) Specifies that the command output is displayed one page at a time. Use the return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl+C keys to stop the command output.

location node-id

(Optional) Specifies a node. The node-id argument is entered in the rack/slot/module notation.

all

Specifies all locations.

trace-only

Displays only trace information.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support pfi command to collect information for the PFI, which consists of interface-related date with regards to netio and interface manager. This command generates output PFI debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router.


Note


This command is not required during normal use of the router.


See the Cisco IOS XR Software command references for information about these commands and descriptions of their command output. The Cisco IOS XR Software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

basic-services

read

cisco-support

read

show tech-support platform

To automatically run show commands that display information specific to platforms, use the show tech-support platform command in EXEC mode.

show tech-support platform { terminal [page] [redundancy] | file send-to | rack }

Syntax Description

terminal

Displays the command output on the terminal.

page

(Optional) Displays the command output on a single page at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl-C keys to stop the command output.

redundancy

(Optional) Displays platform redundancy related diagnostics for tech-support.

file

Specifies that the command output is saved to a specified file.

sent-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • disk0: filename
  • disk1: filename
  • flash: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • nvram: filename
  • rcp: filename
  • slot0: filename
  • slot1: filename
  • tftp: filename

rack

(Optional) Displays the list of racks.

Command Default

No default behavior or values

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support platform command to run show commands that display information specific to platforms. This command generates platform debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.


Note


This command is not required during normal use of the router.


The following show commands run automatically when you run the show tech-support platform command:

  • show controller squid summary
  • show controller plim asic statistics summary location node-id

See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

basic-services

read

Examples

The following example shows some of the show tech-support platform command output:

RP/0/RSP0/CPU0:router# show tech-support platform

------------------------ show controller squid summary ------------------------
Cpuctrl discovered 14 device on node 0/1/CPU0:

Cpuctrl HW version string for this node is:
Squid FPGA v2.07 Fri Jan 23 16:21:01 2004 userb

-----------------------------------------------------------
device_name:         Fabricq    device instance:    0       
Cpuctrl net port:    3          pci_base:            0x8c000000

-----------------------------------------------------------
device_name:         Fabricq    device instance:    1       
Cpuctrl net port:    4          pci_base:            0x90000000

-----------------------------------------------------------
device_name:         Ingressq   device instance:    0       
Cpuctrl net port:    8          pci_base:            0xa0000000

-----------------------------------------------------------
device_name:         Egressq    device instance:    0       
Cpuctrl net port:    7          pci_base:            0x9c000000

-----------------------------------------------------------
device_name:         FIA        device instance:    0       
Cpuctrl net port:    1          pci_base:            0x84000000

-----------------------------------------------------------
device_name:         FIA        device instance:    1       
Cpuctrl net port:    2          pci_base:            0x88000000

-----------------------------------------------------------
device_name:         Cpuctrl    device instance:    0       
Cpuctrl net port:    0          pci_base:            0x80000000

-----------------------------------------------------------
device_name:         PSE        device instance:    1       
Cpuctrl net port:    6          pci_base:            0x98000000

-----------------------------------------------------------
device_name:         PSE        device instance:    0       
Cpuctrl net port:    5          pci_base:            0x94000000

-----------------------------------------------------------
device_name:         PlimAsic for SPA   device instance:    0       
Cpuctrl net port:    9          pci_base:            0xa4000000
.
.
.
------- show controller plim asic statistics summary location 0/1/CPU0 --------
             Node: 0/1/CPU0
--------------------------------------
Instance# 0 Statistics
---------------------------------------------------------------------
To PSE       : 1034176              BP count   : 2615809697
RMC Runt     : 0                    RMC Giant  : 0                   
RMC Tail Drop: 1                    L2P Drop   : 0                   
From Egressq : 924513               SIF Drop   : 0                   
TLK Drop     : 0                   

Port 0
To SPA       : 0                    From SPA  : 0                   
RSI FIFO Drop: 0                    QPM  Drop : 0                   
QPM OVFL     : 0                    RPB  Drop : 0                   

Port 1
To SPA       : 0                    From SPA  : 0                   
RSI FIFO Drop: 0                    QPM  Drop : 0                   
QPM OVFL     : 0                    RPB  Drop : 0                   

Port 2
To SPA       : 924513               From SPA  : 1034177             
RSI FIFO Drop: 0                    QPM  Drop : 0                   
QPM OVFL     : 0                    RPB  Drop : 0                   

Instance# 1 Statistics
---------------------------------------------------------------------
To PSE       : 9217833              BP count   : 2323530765
RMC Runt     : 0                    RMC Giant  : 0                   
RMC Tail Drop: 2590                 L2P Drop   : 0                   
From Egressq : 9317309              SIF Drop   : 0                   
TLK Drop     : 0                   

Port 0
To SPA       : 0                    From SPA  : 0                   
RSI FIFO Drop: 0                    QPM  Drop : 0                   
QPM OVFL     : 0                    RPB  Drop : 0                   
          
Port 1
To SPA       : 537745               From SPA  : 546867              
RSI FIFO Drop: 0                    QPM  Drop : 0                   
QPM OVFL     : 0                    RPB  Drop : 0                   

Port 2
To SPA       : 8779564              From SPA  : 8673556             
RSI FIFO Drop: 0                    QPM  Drop : 0                   
QPM OVFL     : 0                    RPB  Drop : 0   
                

show tech-support ppp

To automatically run show commands that display information specific to Point to Point Protocol (PPP) debugging, use the show tech-support ppp command in EXEC mode.

show tech-support ppp [ file send-to ] [background] [ compressed | uncompressed ] [ interface type instance ] [ location node-id | all ] [rack]

Syntax Description

file

Specifies that the command output is saved to a specified file.

send-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • disk0: filename
  • disk0a: filename
  • disk1: filename
  • disk1a: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • harddiskb: filename
  • nvram: filename
  • rcp: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

interface

Collects information about a specific interface.

type

Interface type. For more information, use the question mark (?) online help function.

instance

Either a physical interface instance or a virtual interface instance as follows:

  • Physical interface instance. Naming notation is rack/slot/module/port and a slash between values is required as part of the notation.
    • rack: Chassis number of the rack.
    • slot: Physical slot number of the modular services card or line card.
    • module: Module number. A physical layer interface module (PLIM) is always 0.
    • port: Physical port number of the interface.
    Note   

    In references to a Management Ethernet interface located on a route processor card, the physical slot number is alphanumeric (RP0 or RP1) and the module is CPU0. Example: interface MgmtEth0/RP1/CPU0/0.

  • Virtual interface instance. Number range varies depending on interface type.

For more information about the syntax for the router, use the question mark (?) online help function.

location

(Optional) Specifies a node.

node-id

(Optional). Node ID. The node-id argument is entered in the rack/slot/module notation.

all

(Optional) Specifies all locations.

rack

(Optional) Displays the list of racks.

Command Modes

EXEC

Command History

Release

Modification

Release 3.9.0

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


This command generates PPP debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router. See Obtaining Documentation and Submitting a Service Request section on page iii in the Preface for Cisco Technical Support contact information.


Note


This command is not required during normal use of the router.


See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

cisco-support

read

Examples

The following example shows some of the show tech-support routing ppp command output that is displayed on the terminal:

RP/0/RSP0/CPU0:router# show tech-support ppp

-------------------------------------------------------------------------------

                             show tech-support ppp 

-------------------------------------------------------------------------------


----------------------------- show running-config -----------------------------
Building configuration...
!! Last configuration change at Wed Oct 10 20:05:13 2007 
!
hostname P1_CRS-8
line console
 exec-timeout 600 0
 session-timeout 600
!
line default
 exec-timeout 600 0
 session-timeout 600

show tech-support qos

To automatically run show commands that display platform dependent and platform independent Quality of Service (QoS) debugging information, use the show tech-support qos command in EXEC mode.

show tech-support qos { platform | pi } [ location node-id ] [rack]

Syntax Description

platform

Collects platform dependent QOS related information and saves to disk.

pi

Collects platform independent QOS related information and saves to disk.

file

Specifies that the command output is saved to a specified file.

send-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • disk0: filename
  • disk0a: filename
  • disk1: filename
  • disk1a: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • harddiskb: filename
  • nvram: filename
  • rcp: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

location

(Optional) Specifies a node.

node-id

Node ID. The node-id argument is entered in the rack/slot/module notation.

rack

(Optional) Displays the list of racks.

Command Modes

EXEC

Command History

Release

Modification

Release 3.9.0

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


This command generates QoS debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router.


Note


This command is not required during normal use of the router.


Task ID

Task ID

Operations

basic-services

read

cisco-support

read

show tech-support rdsfs

To automatically run show commands that display information specific to Replication Data Services File System (RDSFS) debugging, use the show tech-support rdsfs command in EXEC mode.

show tech-support rdsfs { terminal [page] | file send-to [background] [ compressed | uncompressed ] [rack] }

Syntax Description

terminal

Displays the command output on the terminal.

page

(Optional) Displays the command output on a single page at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl-C keys to stop the command output.

file

Specifies that the command output is saved to a specified file.

send-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • disk0: filename
  • disk0a: filename
  • disk1: filename
  • disk1a: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • harddiskb: filename
  • nvram: filename
  • rcp: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

rack

(Optional) Displays the list of racks.

Command Modes

EXEC

Command History

Release

Modification

Release 3.8.0

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support rdsfs command to run show commands that display information specific to RDSFS debugging and is relevant to bring to a ready state. This command generates RDSFS debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router.


Note


This command is not required during normal use of the router.


See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

cisco-support

read

Examples

The following example shows how to run show tech-support rdsfs command:

RP/0/RSP0/CPU0:router# show tech-support rdsfs

show tech-support rib

To automatically run show commands that display information specific to Routing Information Base (RIB) debugging, use the show tech-support rib command in EXEC mode.

show tech-support rib { terminal [page] | file send-to [background] [ compressed | uncompressed ] } [ ipv4 | ipv6 ]

Syntax Description

terminal

Displays the command output on the terminal.

page

(Optional) Displays the command output on a single page at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl-C keys to stop the command output.

file

Specifies that the command output is saved to a specified file.

send-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • disk0: filename
  • disk0a: filename
  • disk1: filename
  • disk1a: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • harddiskb: filename
  • nvram: filename
  • rcp: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

ipv4

(Optional) Displays the IPv4 command output.

ipv6

(Optional) Displays the IPv6 command output.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


The RIB data stores the best path information for the routing protocol that is sent to FIB to help build the data structures. This command generates RIB debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router.


Note


This command is not required during normal use of the router.


See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

cisco-support

read

show tech-support routing bfd

To automatically run show commands that display information specific to Bidirectional Forwarding Detection (BFD) debugging, use the show tech-support routing bfd command inEXEC mode.

show tech-support routing bfd { terminal [page] | file send-to [background] [ compressed | uncompressed ] [rack] }

Syntax Description

terminal

Displays the command output on the terminal.

page

(Optional) Displays the command output on a single page at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl-C keys to stop the command output.

file

(Optional) Specifies that the command output is saved to a specified file.

sent-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • disk0: filename
  • disk1: filename
  • flash: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • nvram: filename
  • rcp: filename
  • slot0: filename
  • slot1: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

rack

(Optional) Displays the list of racks.

Command Default

The command output is not compressed.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support routing bfd command to run show commands that display information specific to BFD debugging. This command generates BFD debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router.


Note


This command is not required during normal use of the router.


The following show commands run automatically when you run the show tech-support routing bfd command:

  • show bfd session
  • show bfd
  • show memory heap fail all
  • show memory summary location all
  • show process blocked location all
  • show adjacency
  • show bfd location
  • show bfd session detail location node-id
  • show bfd session agent detail location
  • show bfd timer-groups locationnode-id
  • show bfd index-mgrs location node-id
  • show bfd session-array location node-id
  • show bfd interfaces location node-id
  • show bfd bundles detail location node-id
  • show bfd counters packet invalid location node-id
  • show bfd counters packet private location node-id
  • show bfd client private
  • show bfd trace all-cards
  • show controllers cpuctrl summary
  • show controllers cpuctrl client pdma bfd active location all
  • show controllers cpuctrl ports ingressq pdma all active location node-id
  • show controllers cpuctrl ports egressq pdma all active location node-id
  • show controllers pse statistics location node-id

See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

basic-services

read

show tech-support routing isis

To automatically run show commands that display information specific to Intermediate System-to-Intermediate System (IS-IS) debugging, use the show tech-support routing isis command in EXEC mode.

show tech-support routing isis { terminal [page] | file send-to [background] [ compressed | uncompressed ] }

Syntax Description

terminal

Displays the command output on the terminal.

page

(Optional) Displays the command output on a single page at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl-C keys to stop the command output.

file

Specifies that the command output is saved to a specified file.

sent-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • disk0: filename
  • disk1: filename
  • flash: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • nvram: filename
  • rcp: filename
  • slot0: filename
  • slot1: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

Command Default

The command output is not compressed.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support isis command to run show commands that display information specific to IS-IS debugging. This command generates IS-IS debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.


Note


This command is not required during normal use of the router.


The following show commands run automatically when you run the show tech-support routing isis command:

  • show isis trace all location all
  • show isis all
  • show clns statistics
  • show imds interface all
  • show ipv4 int brief
  • show ipv6 int brief
  • show route ipv4
  • show route ipv6
  • show inst which comp clns-isis

See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

basic-services

read

Examples

The following example shows some of the show tech-support routing isis command output:

RP/0/RSP0/CPU0:router# show tech-support isis terminal page 

-------------------------------------------------------------------------------

                            show tech-support isis                             

-------------------------------------------------------------------------------


---------------------- show isis instance isp trace all -----------------------
184 wrapping entries (6144 possible, 0 filtered, 184 total)
Mar 29 08:38:18.437 isis/isp/sev 0/RP0/CPU0 t1  STARTUP_START
Mar 29 08:38:18.437 isis/isp/sev 0/RP0/CPU0 t1  STARTUP_MODULE
Mar 29 08:38:18.438 isis/isp/sev 0/RP0/CPU0 t1  STARTUP_MODULE
Mar 29 08:38:18.438 isis/isp/sev 0/RP0/CPU0 t1  THREAD_CREATING
Mar 29 08:38:18.451 isis/isp/det 0/RP0/CPU0 t1  THREAD_THREAD_ID
Mar 29 08:38:18.451 isis/isp/sev 0/RP0/CPU0 t1  THREAD_CREATING
Mar 29 08:38:18.451 isis/isp/sev 0/RP0/CPU0 t1  THREAD_CREATING
Mar 29 08:38:18.452 isis/isp/sev 0/RP0/CPU0 t1  THREAD_CREATING
Mar 29 08:38:18.452 isis/isp/sev 0/RP0/CPU0 t1  THREAD_CREATING
Mar 29 08:38:18.536 isis/isp/sev 0/RP0/CPU0 t1  STARTUP_MODULE
Mar 29 08:38:19.274 isis/isp/sev 0/RP0/CPU0 t1  STARTUP_MODULE
Mar 29 08:38:19.470 isis/isp/sev 0/RP0/CPU0 t1  IO_PAK_SERVER_CONNECTED
Mar 29 08:38:19.551 isis/isp/det 0/RP0/CPU0 t1  IO_SOCKET_CREATE_SUCCESS
Mar 29 08:38:19.555 isis/isp/sev 0/RP0/CPU0 t1  IO_SOCKET_CONN_OPEN
Mar 29 08:38:20.561 isis/isp/std 0/RP0/CPU0 t1  ROUTE_RIB_PURGE_TIME_SET
.
.
.
Mar 29 08:38:27.622 isis/isp/det 0/RP0/CPU0 t4  THREAD_FOP_PROCESS
Mar 29 08:38:27.622 isis/isp/det 0/RP0/CPU0 t4  SSM_TICK_TIMER_FIRES CR-SYNC-LSPDB
Mar 29 08:38:27.622 isis/isp/det 0/RP0/CPU0 t4  SSM_STATE_RESULT CR-SYNC-LSPDB
Mar 29 08:38:27.622 isis/isp/det 0/RP0/CPU0 t4  SSM_STATE_TIME_BUDGET CR-SYNC-LSPDB
Mar 29 08:38:27.622 isis/isp/sev 0/RP0/CPU0 t4  SSM_STATE_RUN CR-SYNC-LSPDB

-------------------------------- show isis all --------------------------------

No IS-IS isp levels found
No IS-IS isp levels found
No IS-IS isp levels found
No IS-IS isp levels found
No IS-IS isp levels found
No IS-IS isp levels found
No IS-IS isp levels found
No IS-IS isp levels found
No IS-IS isp levels found
No IS-IS isp IPv4 Unicast levels found
No IS-IS isp IPv4 Unicast levels found
No IS-IS isp IPv4 Unicast levels found
No IS-IS isp IPv4 Unicast levels found
No IS-IS isp IPv4 Unicast levels found
IS-IS Router: isp
  System Id: 0000.0000.0000 (Not configured, protocol disabled)
  IS Levels: level-1-2
  Manual area address(es):
  Routing for area address(es):
  Non-stop forwarding: Disabled
  Most recent startup mode: Cold Restart
  Topologies supported by IS-IS:
    IPv4 Unicast
      No protocols redistributed
      Distance: 115
  Interfaces supported by IS-IS:
    POS0/1/0/0 is disabled (active in configuration)

No IS-IS isp host data available

IS-IS isp Interfaces
POS0/1/0/0                  Disabled (No NET configured)

IS-IS isp Interfaces
    Interface      All     Adjs    Adj Topos  Adv Topos  CLNS   MTU    Prio  
                   OK    L1   L2    Run/Cfg    Run/Cfg                L1   L2
-----------------  ---  ---------  ---------  ---------  ----  ----  --------
PO0/1/0/0          No 

No IS-IS isp mesh-groups found

IS-IS isp statistics:
  IS-IS statistics:
    Fast PSNP cache (hits/tries): 0/0
    LSP checksum errors received: 0
    LSP Dropped: 0
    SNP Dropped: 0
    UPD Max Queue size: 0

IS-IS isp neighbor summary:
State         L1       L2     L1L2
Up             0        0        0
Init           0        0        0
Failed         0        0        0
          
IS-IS isp neighbors:
System Id      Interface        SNPA           State Holdtime Type IETF-NSF

IS-IS isp Database Summary for all LSPs
                              Active             Purged              All
                         L1    L2   Total   L1    L2   Total   L1    L2   Total
                        ----- ----- -----  ----- ----- -----  ----- ----- -----
Fragment 0 Counts
           Router LSPs:     0     0     0      0     0     0      0     0     0
      Pseudo-node LSPs:     0     0     0      0     0     0      0     0     0
              All LSPs:     0     0     0      0     0     0      0     0     0

All Fragment Counts
           Router LSPs:     0     0     0      0     0     0      0     0     0
      Pseudo-node LSPs:     0     0     0      0     0     0      0     0     0
              All LSPs:     0     0     0      0     0     0      0     0     0

IS-IS isp IS Topology Summary IPv4 Unicast
                          L1                         L2
                Reach  UnReach  Total      Reach  UnReach  Total
               ------- ------- -------    ------- ------- -------
Router nodes:        0       0       0          0       0       0
Pseudo nodes:        0       0       0          0       0       0

 Total nodes:        0       0       0          0       0       0

IS-IS isp IPv4 Unicast routes

Codes: L1 - level 1, L2 - level 2, ia - interarea (leaked into level 1)
       df - level 1 default (closest attached router), su - summary null
       C - connected, S - static, R - RIP, B - BGP, O - OSPF
       i - IS-IS (redistributed from another instance)

Maximum parallel path count: 8

IS-IS isp checkpoint interface
Interface         Handle    CircNum  DIS Areas    Adj  Chkpt ID
No 'checkpoint interfaces' found in IS-IS isp

IS-IS isp checkpoint adjacencies
System ID      Interface        SNPA           Lvl  Hold Pri  CID  Chkpt ID Nexthops
No 'checkpoint adjacencies' found in IS-IS isp

IS-IS isp checkpoint LSPs
Level  LSPID                  Chkpt ID
  No 'checkpoint LSPs' found in IS-IS isp

 Total LSP count: 0 (L1: 0, L2 0, local L1: 0, local L2 0)

---------------------------- show clns statistics -----------------------------
CLNS Statistics:
Last counter clear:                    1067929 seconds ago
Total number of packets sent:          0
Total number of packets received:      0
Send packets dropped, total:           0
Send packets dropped, buffer overflow: 0
Send packets dropped, out of memory:   0
Send packets dropped, netio:           0
Send packets dropped, other:           0
Receive socket max queue size:         0
Receive packets dropped, total:        0
Receive packets dropped, other:        0
Receive packets dropped per pdu class:  

Class    Overflow/Max   Rate Limit/Max
IIH             0/0              0/0    
LSP             0/0              0/0    
SNP             0/0              0/0    
OTHER           0/0              0/0    
Total          0                0

--------------------------- show imds interface all ---------------------------
IMDS INTERFACE DATA (Node 0x201)

MgmtEth0_RP0_CPU0_0 (0x00080000)
-----------------------
flags: 0x0001002f    type: 8 (IFT_ETHERNET)    encap: 30 (ether)
state: 3 (up)     mtu: 1514    protocol count: 4
control parent: 0x00000000     data parent: 0x00000000
       protocol         capsulation           state        mtu
    --------------- -------------------- --------------- --------
    7 (arp)        
.

show tech-support routing ospf

To automatically run show commands that display information specific to Open Shortest Path First (OSPF) debugging, use the show tech-support routing ospf command in EXEC mode.

show tech-support routing ospf [process-id] [no-trace] [ active | standby ] { terminal [page] | file send-to [background] [ compressed | uncompressed ] }

Syntax Description

process-id

(Optional) Name of the OSPF process.

no-trace

(Optional) Excludes trace information from the command output.

active

(Optional) Displays information from active route processor only.

standby

(Optional) Displays information from standby route processor only.

terminal

Displays the command output on the terminal.

page

(Optional) Displays the command output on a single page at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl-C keys to stop the command output.

file

Specifies that the command output is saved to a specified file.

sent-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • disk0: filename
  • disk1: filename
  • flash: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • nvram: filename
  • rcp: filename
  • slot0: filename
  • slot1: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

Command Default

The command output is not compressed.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support routing ospf command to run show commands that display information specific to OSPF debugging. This command generates OSPF debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router.


Note


This command is not required during normal use of the router.


The following show commands run automatically when you run the show tech-support routing ospf command:

  • show ospf
  • show ospf vrf all
  • show ospf summary
  • show ospf vrf all summary
  • show ospf interface
  • show ospf vrf all interface
  • show ospf virtual-links
  • show ospf vrf all virtual-links
  • show ospf neighbor detail
  • show ospf vrf all neighbor detail
  • show ospf database database-summary
  • show ospf vrf all database database-summary
  • show ospf database router self-originate
  • show ospf vrf all database router self-originate
  • show ospf statistics prot
  • show ospf statistics raw-io
  • show ospf statistics te
  • show ospf statistics spf
  • show ospf statistics rib-thread
  • show ospf statistics rib-batch
  • show ospf message-queue
  • show ospf border-routers
  • show ospf vrf all border-routers
  • show ospf retransmission-list
  • show ospf vrf all retransmission-list
  • show ospf request-list
  • show ospf vrf all request-list
  • show ospf flood-list
  • show ospf vrf all flood-list
  • show ospf maxage-list
  • show ospf vrf all maxage-list
  • show ospf bad-checksum
  • show ospf vrf all bad-checksum
  • show ospf standby
  • show ospf vrf all standby
  • show ip interface brief
  • show route ipv4 summary
  • show route vrf all ipv4 summary
  • show ospf trace all
  • show logging process ospf

Note


  • If you do not specify any options, all information is collected by default.
  • Active and standby options are exclusive and only one of them can be used. When neither active or standby is used, the information is collected from both RPs.
  • The no-trace option can be used with or without specifying the active or standby options.
  • When standby option is specified, only ospf- related information from the standby RP is included in the output. The common non-ospf information such as version, placement info, logging and so on are not included.

See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

basic-services

read

show tech-support routing ospfv3

To automatically run show commands that display information specific to Open Shortest Path First Version 3 (OSPFv3) debugging, use the show tech-support routing ospfv3 command inEXEC mode.

show tech-support routing ospfv3 [instance] [detail] { terminal [page] | file send-to [background] [ compressed | uncompressed ] }

Syntax Description

instance

(Optional) Name of the OSPFv3 instance.

detail

(Optional) Displays all available OSPFv3 information.

terminal

Displays the command output on the terminal.

page

(Optional) Displays the command output on a single page at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl-C keys to stop the command output.

file

Specifies that the command output is saved to a specified file.

sent-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • disk0: filename
  • disk1: filename
  • flash: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • nvram: filename
  • rcp: filename
  • slot0: filename
  • slot1: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

Command Default

The command output is not compressed.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support routing ospfv3 command to run show commands that display information specific to OSPFv3 debugging. This command generates OSPFv3 debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router.


Note


This command is not required during normal use of the router.


The following show commands run automatically when you run the show tech-support routing ospfv3 command:

  • show version
  • show run router ospfv3
  • show route ipv6 ospf
  • show ospfv3
  • show ospfv3 interface
  • show ospfv3 virtual-links
  • show ospfv3 neighbor
  • show ospfv3 message-queue
  • show ospfv3 request-list
  • show ospfv3 retransmission-list
  • show ospfv3 flood-list
  • show ospfv3 border-routers
  • show ospfv3 database database-summary
  • show ospfv3 database
  • show ospfv3 route

See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

basic-services

read

show tech-support routing rpl

To automatically run show commands that display information specific to Routing Policy Language (RPL) debugging, use the show tech-support routing rpl command in EXEC mode.

show tech-support routing rpl { file send-to [background] [ compressed | uncompressed ] | terminal [page] }

Syntax Description

terminal

Displays the command output on the terminal.

page

(Optional) Displays the command output on a single page at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl-C keys to stop the command output.

file

Specifies that the command output is saved to a specified file.

sent-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • disk0: filename
  • disk1: filename
  • flash: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • nvram: filename
  • rcp: filename
  • slot0: filename
  • slot1: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

Command Default

The command output is not compressed.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support routing rpl command to run show commands that display information specific to RPL debugging. This command generates RPL debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router.


Note


This command is not required during normal use of the router.


The following show commands run automatically when you run the show tech-support routing rpl command:

  • show running-config rpl
  • show process policy_repository
  • show rpl route-policy policy-name pxl
  • show sysdb reg notif path /ipc/gl/policy_lang/policies/routing/ policy-name /pxl s

See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

basic-services

read

show tech-support serial

To automatically run show commands that display information specific to serial debugging, use the show tech-support serial command in EXEC mode.

show tech-support serial { terminal [page] | file send-to [background] [ compressed | uncompressed ] } [ interface type instance ] [show-only] [trace-only] [ location node-id | all ]

Syntax Description

file

Specifies that the command output is saved to a specified file.

sent-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • disk0: filename
  • disk0a: filename
  • disk1: filename
  • disk1a: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • harddiskb: filename
  • nvram: filename
  • rcp: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

interface

(Optional) Collects information about a specific interface.

type

Interface type. For more information, use the question mark (?) online help function.

instance

Either a physical interface instance or a virtual interface instance as follows:

  • Physical interface instance. Naming notation is rack/slot/module/port and a slash between values is required as part of the notation.
    • rack: Chassis number of the rack.
    • slot: Physical slot number of the modular services card or line card.
    • module: Module number. A physical layer interface module (PLIM) is always 0.
    • port: Physical port number of the interface.
    Note   

    In references to a Management Ethernet interface located on a route processor card, the physical slot number is alphanumeric (RP0 or RP1) and the module is CPU0. Example: interface MgmtEth0/RP1/CPU0/0.

  • Virtual interface instance. Number range varies depending on interface type.

For more information about the syntax for the router, use the question mark (?) online help function.

show-only

(Optional) Collects only show command information.

terminal

Specifies that the command output is displayed on the terminal.

trace-only

(Optional) Collects only trace information.

location node-id

(Optional) Specifies a node. The node-id argument is entered in the rack/slot/module notation.

all

(Optional) Specifies all locations.

page

(Optional) Specifies that the command output is displayed one page at a time. Use the return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl+C keys to stop the command output.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support serial command for serial-related data, such as T1/E1. This command generates serial debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router.


Note


This command is not required during normal use of the router.


See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

cisco-support

read

show tech-support sanitized

To automatically run show commands that display information specific to sanitized configuration output, use the show tech-support sanitized command in EXEC mode.

show tech-support sanitized { terminal [page] | file send-to [background] [ compressed | uncompressed ] } [ location node-id | all ] [rack]

Syntax Description

terminal

Displays the command output on the terminal.

page

(Optional) Displays the command output on a single page at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl-C keys to stop the command output.

file

Specifies that the command output is saved to a specified file.

sent-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • disk0: filename
  • disk1: filename
  • flash: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • nvram: filename
  • rcp: filename
  • slot0: filename
  • slot1: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

location

(Optional) Specifies a node.

node-id

(Optional). Node ID. The node-id argument is entered in the rack/slot/module notation.

all

(Optional) Specifies all locations.

rack

(Optional) Displays the list of racks.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


This command generates sanitized configuration output for debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.


Note


This command is not required during normal use of the router.


See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

basic-services

read

Examples

The following example shows some of the show tech-support sanitized command output that is displayed on the terminal:

RP/0/RSP0/CPU0:router# show tech-support sanitized terminal page 

-------------------------------------------------------------------------------

                               show tech-support                               

-------------------------------------------------------------------------------



----------------------- show running-config (sanitized) -----------------------

Building configuration...
!! Last configuration change at Wed Oct 10 20:05:13 2007 by <removed>
!
hostname <removed>
line console
 exec-timeout 600 0
 session-timeout 600
!
line default
 exec-timeout 600 0
 session-timeout 600
!
clock timezone <removed> 8
clock summer-time <removed> recurring 2 sunday march 02:00 first sunday novembe0
logging console informational
telnet vrf <removed> ipv4 server max-servers no-limit
domain ipv4 host <removed> 10.0.0.1
domain ipv4 host <removed> 10.0.0.2
domain ipv4 host <removed> 10.0.0.3
domain ipv4 host <removed> 10.0.0.4
domain ipv4 host <removed> 10.0.0.5
domain ipv4 host <removed> 10.0.0.6
domain ipv4 host <removed> 10.0.0.7
domain ipv4 host <removed> 10.0.0.8
domain ipv4 host <removed> 10.0.0.9
domain ipv4 host <removed> 10.0.0.10
domain ipv4 host <removed> 10.0.0.11
domain ipv4 host <removed> 10.0.0.12
domain ipv4 host <removed> 10.0.0.13
domain ipv4 host <removed> 10.0.0.14
domain lookup disable
username <removed>
 password 7 <removed>
!
aps group 1
 revert 1 
 channel 0 local SONET0/1/4/3
 channel 1 local SONET0/1/4/2
!
vty-pool default 0 25
alias <removed> <removed>
alias <removed> <removed>
alias <removed> <removed>
alias <removed> <removed>
alias <removed> <removed>
alias <removed> <removed>
alias <removed> <removed>
alias <removed> <removed>
alias <removed> <removed>
alias <removed> <removed>
alias <removed> <removed>
alias <removed> <removed>
control-plane
 management-plane
  inband
   interface all
    allow all
   !
  !       
 !
!
ipv4 virtual address 10.0.0.14 255.0.0.0
hw-module service sbc location 0/4/CPU0
hw-module service sbc location 0/4/CPU1
interface Bundle-Ether28
 description <removed>
 ipv4 address 10.0.0.14 255.0.0.0
 bundle minimum-active links 1
 bundle minimum-active bandwidth 1000000
!
interface Bundle-Ether28.1
 description <removed>
 ipv4 address 10.0.0.14 255.0.0.0
 encapsulation dot1q 29
!
interface Bundle-Ether28.2
 description <removed>
 ipv4 address 10.0.0.14 255.0.0.0
 encapsulation dot1q 30
!
interface Bundle-Ether28.3
 description <removed>
 ipv4 address 10.0.0.14 255.0.0.0
 encapsulation dot1q 31
!
interface Bundle-POS24
 description <removed>
 ipv4 address 10.0.0.14 255.0.0.0
 bundle minimum-active links 1
 bundle minimum-active bandwidth 2488320
!
interface Loopback0
 ipv4 address 10.0.0.14 255.0.0.0
!
interface MgmtEth0/4/CPU0/0
 description <removed>
 ipv4 address 10.0.0.14 255.0.0.0
!
interface MgmtEth0/4/CPU1/0
 description <removed>
 ipv4 address 10.0.0.14 255.0.0.0
!
interface MgmtEth0/RP0/CPU0/0
 description <removed>
 ipv4 address 10.0.0.14 255.0.0.0
!
interface MgmtEth0/RP1/CPU0/0
 description <removed>
 ipv4 address 10.0.0.14 255.0.0.0
!
interface GigabitEthernet0/1/5/0
 description <removed>
 ipv4 address 10.0.0.14 255.0.0.0
!
interface GigabitEthernet0/1/5/1
 description <removed>
 ipv4 address 10.0.0.14 255.0.0.0
!
interface GigabitEthernet0/1/5/2
 description <removed>
 ipv4 address 10.0.0.14 255.0.0.0
!
interface GigabitEthernet0/1/5/3
 shutdown
!
interface GigabitEthernet0/1/5/4
 shutdown
!         
interface GigabitEthernet0/1/5/5
 shutdown
!
interface GigabitEthernet0/1/5/6
 description <removed>
 bundle id 28 mode active
!
interface GigabitEthernet0/1/5/7
 description <removed>
 bundle id 28 mode active
!
interface GigabitEthernet0/6/5/0
 shutdown
!
interface GigabitEthernet0/6/5/1
 description <removed>
 ipv4 address 10.0.0.14 255.0.0.0
!
interface GigabitEthernet0/6/5/2
 description <removed>
 ipv4 address 10.0.0.14 255.0.0.0
!
interface GigabitEthernet0/6/5/3
 shutdown
!
interface GigabitEthernet0/6/5/4
 shutdown
!
interface GigabitEthernet0/6/5/5
 shutdown
!
interface GigabitEthernet0/6/5/6
 shutdown
!
interface GigabitEthernet0/6/5/7
 description <removed>
 ipv4 address 10.0.0.14 255.0.0.0
!
interface POS0/1/0/0
 shutdown
!
interface POS0/1/0/1
 description <removed>
 ipv4 address 10.0.0.14 255.0.0.0
!
interface POS0/1/0/2
 shutdown
!
interface POS0/1/0/3
 shutdown
!
interface POS0/1/4/0
 description <removed>
 bundle id 24 mode active
!
interface POS0/1/4/1
 description <removed>
 bundle id 24 mode active
!
interface POS0/1/4/2
 description <removed>
 ipv4 address 10.0.0.14 255.0.0.0
 encapsulation ppp
 ppp pap sent-username <removed> password encrypted <removed>
 ppp authentication chap pap
 ppp chap password encrypted <removed>
!
interface POS0/1/4/3
 description <removed>
 ipv4 address 10.0.0.14 255.0.0.0
 encapsulation ppp
 ppp pap sent-username <removed> password encrypted <removed>
 ppp authentication chap pap
 ppp chap password encrypted <removed>
!
interface POS0/6/0/0
 description <removed>
 ipv4 address 10.0.0.14 255.0.0.0
!
interface POS0/6/0/1
 description <removed>
 ipv4 address 10.0.0.14 255.0.0.0
!
interface POS0/6/0/2
 shutdown
!
interface POS0/6/0/3
 description <removed>
 ipv4 address 10.0.0.14 255.0.0.0
!
interface POS0/6/4/0

show tech-support services

To automatically run show commands that display information specific to tech-support information that relates to services, use the show tech-support services command in EXEC mode.

show tech-support services diversion { terminal [page] | file send-to [background] [ compressed | uncompressed ] } [ location node-id | all ]

Syntax Description

diversion

Collects information about packet diversion.

terminal

Displays the command output on the terminal.

page

(Optional) Displays the command output on a single page at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl-C keys to stop the command output.

file

Specifies that the command output is saved to a specified file.

sent-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • disk0: filename
  • disk1: filename
  • flash: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • nvram: filename
  • rcp: filename
  • slot0: filename
  • slot1: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

locationnode-id

Specifies a node. The node-id argument is entered in the rack/slot/module notation.

all

(Optional) Specifies all locations.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support services command to run show commands that display information specific to the services diversion infrastructure, which is used with the service blade offerings for the Cisco IOS XR platforms. This command generates tech-support information that relates to services debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router.


Note


This command is not required during normal use of the router.


See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

cisco-support

read

show tech-support snmp

To automatically run show commands that display information specific to tech-support information related to Simple Network Management Protocol (SNMP) agent, use the show tech-support snmp command in EXEC mode.

show tech-support snmp [ entitymib | ifmib ] [rack] [ location node-id | all ] file send-to

Syntax Description

entitymib

(Optional) Displays the entitymib debugging information.

ifmib

(Optional) Displays the ifmib debugging information.

rack

(Optional) Displays the list of racks.

file

Specifies that the command output is saved to a specified file.

send-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • compactflash: filename
  • disk0: filename
  • disk0a: filename
  • disk1: filename
  • disk1a: filename
  • flash: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • harddiskb: filename
  • nvram: filename
  • rcp: filename
  • slot0: filename
  • slot1: filename
  • tftp: filename

locationnode-id

(Optional) Specifies a node. The node-id argument is entered in the rack/slot/module notation.

all

(Optional) Specifies all locations.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.



Note


This command is not required during normal use of the router.


See the Cisco IOS XR Software command references for information about these commands and descriptions of their command output. The Cisco IOS XR Software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

basic-services

read

cisco-support

read

show tech-support spaipc

To automatically run show commands that display information specific to SPA Inter Process Communication (SPAIPC) debugging, use the show tech-support spaipc command in EXEC mode

show tech-support spaipc { terminal [page] | file send-to [background] [ compressed | uncompressed ] } [ interface type interface-path-id ] [show-only] [trace-only] [ location node-id | all ]

Syntax Description

file

Specifies that the command output is saved to a specified file.

sent-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • disk0: filename
  • disk0a: filename
  • disk1: filename
  • disk1a: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • harddiskb: filename
  • nvram: filename
  • rcp: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

interface

(Optional) Collects information about a specific interface.

type

Interface type. For more information, use the question mark (?) online help function.

interface-path-id

Physical interface or virtual interface.

Note   

Use the show interfaces command to see a list of all interfaces currently configured on the router.

For more information about the syntax for the router, use the question mark ( ? ) online help function.

show-only

(Optional) Collects only show command information.

terminal

Displays the command output on the terminal.

trace-only

(Optional) Collects only trace information.

location

(Optional) Specifies a node.

node-id

(Optional). Node ID. The node-id argument is entered in the rack/slot/module notation.

all

(Optional) Specifies all locations.

page

(Optional) Displays the command output on a single page at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl-C keys to stop the command output.

Command Modes

EXEC

Command History

Release

Modification

Release 2.0

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


This command generates SPAIPC debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.


Note


This command is not required during normal use of the router.


See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

cisco-support

read

Examples

The following example how to run the show tech-support spaipc command:

RP/0/RSP0/CPU0:router# show tech-support spaipc terminal page

-------------------------------------------------------------------------------
	                           show tech-support spaipc                            

-------------------------------------------------------------------------------

----------------------------- show running-config -----------------------------
Building configuration...
!! Last configuration change at Wed Oct 10 20:05:13 2007 
!
hostname P1_CRS-8
line console
 exec-timeout 600 0
 session-timeout 600
!
line default
 exec-timeout 600 0
 session-timeout 600
!
clock timezone PST 8
clock summer-time DST recurring 2 sunday march 02:00 first sunday november 02:00
logging console informational
telnet vrf default ipv4 server max-servers no-limit
domain ipv4 host p1 172.29.52.72
domain ipv4 host p2 172.29.52.77
domain ipv4 host ce6 172.29.52.73
domain ipv4 host ce7 172.29.52.78
domain ipv4 host p11 172.29.52.83
domain ipv4 host pe6 172.29.52.128
domain ipv4 host pe7 172.29.52.182
domain ipv4 host ce25 172.29.52.85
domain ipv4 host ce28 172.29.52.1
domain ipv4 host ce29 172.29.52.178
domain ipv4 host pe21 172.29.52.163
domain ipv4 host pe22 172.29.52.219
domain ipv4 host ce28_nme 172.29.52.177
domain ipv4 host ce29_nme 172.29.52.179
domain lookup disable
username P2_CRS-8
 password 7 13061E010803
!
aps group 1
 revert 1
 channel 0 local SONET0/1/4/3
 channel 1 local SONET0/1/4/2
!
vty-pool default 0 25
alias cr copy run disk0:/usr/P1_base_config
alias sa show alias
alias sc show config commit list
alias sd show diag
alias si show ip int brief
alias sl show led
alias sm show mpls forwarding
alias sp show platform
alias sr show run
alias su show users
alias sv show version
alias sir show ip route
control-plane
 management-plane
  inband
   interface all
    allow all
   !
  !
 !
!         
ipv4 virtual address 172.29.52.72 255.255.255.0
hw-module service sbc location 0/4/CPU0
hw-module service sbc location 0/4/CPU1
interface Bundle-Ether28
 description Connected to P2_CRS-8 Bundle-Ether 28
 ipv4 address 10.12.28.1 255.255.255.0
 bundle minimum-active links 1
 bundle minimum-active bandwidth 1000000
!
interface Bundle-Ether28.1
 description Connected to P2_CRS-8 Bundle-Ether 28.1
 ipv4 address 10.12.29.1 255.255.255.0
 encapsulation dot1q 29
!
interface Bundle-Ether28.2
 description Connected to P2_CRS-8 Bundle-Ether 28.2
 ipv4 address 10.12.30.1 255.255.255.0
 encapsulation dot1q 30
!
interface Bundle-Ether28.3
 description Connected to P2_CRS-8 Bundle-Ether 28.3
 ipv4 address 10.12.31.1 255.255.255.0
 encapsulation dot1q 31
!
interface Bundle-POS24
 description Connected to P2_CRS-8 Bundle-POS 24
 ipv4 address 10.12.24.1 255.255.255.0
 bundle minimum-active links 1
 bundle minimum-active bandwidth 2488320
!
interface Loopback0
 ipv4 address 10.1.1.1 255.255.255.255
!
interface MgmtEth0/4/CPU0/0
 description Connected to Lab LAN
 ipv4 address 172.29.52.46 255.255.255.0
!
interface MgmtEth0/4/CPU1/0
 description Connected to Lab LAN
 ipv4 address 172.29.52.47 255.255.255.0
!
interface MgmtEth0/RP0/CPU0/0
 description Connected to Lab LAN
 ipv4 address 172.29.52.70 255.255.255.0
!
interface MgmtEth0/RP1/CPU0/0
 description Connected to Lab LAN
 ipv4 address 172.29.52.71 255.255.255.0
!
interface GigabitEthernet0/1/5/0
 description Connected to P2_CRS-8 GE 0/1/5/0
 ipv4 address 10.12.16.1 255.255.255.0
!
interface GigabitEthernet0/1/5/1
 description Connected to P4_C12810 GE 5/2
 ipv4 address 10.14.8.1 255.255.255.0
!
interface GigabitEthernet0/1/5/2
 description Connected to PE6_C12406 GE 0/4/0/1
 ipv4 address 10.16.4.1 255.255.255.0
!
interface GigabitEthernet0/1/5/3
 shutdown
!
interface GigabitEthernet0/1/5/4
 shutdown
!
interface GigabitEthernet0/1/5/5

show tech-support sysdb

To automatically run show commands that display information specific to the System Database (SysDB), use the show tech-support sysdb command in EXEC mode.

show tech-support sysdb { terminal [page] | file send-to [background] [ compressed | uncompressed ] } [ shared-plane | rack ] [ location node-id ]

Syntax Description

terminal

Displays the command output on the terminal.

page

(Optional) Displays the command output on a single page at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, it does not stop for page breaks).

Press the Ctrl-C keys to stop the command output.

file

Specifies that the command output is saved to a specified file.

sent-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • disk0: filename
  • disk0a: filename
  • disk1: filename
  • disk1a: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • harddiskb: filename
  • nvram: filename
  • rcp: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

shared-plane

(Optional) Displays the data for the shared plane.

rack

(Optional) Displays the list of racks.

location

(Optional) Specifies a node.

node-id

(Optional). Node ID. The node-id argument is entered in the rack/slot/module notation.

Command Modes

EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.

For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


The SysDB is the memory database that is used to store configuration and statistical data with some IPC data. This command generates SysDB information that relates to debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router.


Note


This command is not required during normal use of the router.


See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html

Task ID

Task ID

Operations

cisco-support

read

show tech-support tty

To automatically run show commands that display information specific to tech-support information related to TTY, use the show tech-support tty command in EXEC mode.

show tech-support tty [ file sent-to [ background | | compressed | | uncompressed | ] | location node-id | rack rack-id ]

Syntax Description

file

(Optional) Specifies that the command output is saved to a specified file.

sent-to

Name of the file. The following valid options are listed:

  • filename
  • bootflash: filename
  • disk0: filename
  • disk0a: filename
  • disk1: filename
  • disk1a: filename
  • disk2: filename
  • ftp: filename
  • harddisk: filename
  • harddiska: filename
  • harddiskb: filename
  • lcdisk0: filename
  • lcdisk0a: filename
  • nvram: filename
  • rcp: filename
  • tftp: filename

background

(Optional) Specifies that the command runs in the background.

compressed

(Optional) Displays compressed command output.

uncompressed

(Optional) Displays the command output with no compression.

location node-id

(Optional) Specifies a node.

The node-id argument is entered in the rack/slot/module notation.

rack rack-id

(Optional) Specifies a list of racks.

The rack-id denotes a rack number.

Command Default

The command output is not compressed.

Command Modes

EXEC

Command History

Release Modification

Release 4.3.0

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.


Tip


This command can generate a very large amount of output. You may want to redirect the output to a file using the file send-to keyword and argument. Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier.


Use the show tech-support tty command to run show commands that display information specific to tty debugging. This command generates tty debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.


Note


This command is not required during normal use of the router.


Task ID

Task ID Operation

cisco-support

read

Examples

The following example shows the output of the show tech-support tty command:

RP/0/RSP0/CPU0:router# show tech-support tty
Tue Sep  4 09:41:21.414 UTC
++ Show tech start time: 2012-Sep-04.094121.UTC ++
Tue Sep 04 09:41:22 UTC 2012 Waiting for gathering to complete
................................
Tue Sep 04 09:44:31 UTC 2012 Compressing show tech output
Show tech output available at 0/RP0/CPU0 : harddisk:/showtech/showtech-tty-2012-Sep-04.094121.UTC.tgz
++ Show tech end time: 2012-Sep-04.094432.UTC ++

show tty details

To display TTY session information, use the show tty details command in the EXEC mode.

show tty details [ location node-id ]

Syntax Description

location node-id

(Optional) Specifies a node. The node-id argument is entered in the rack/slot/module notation.

Command Default

None

Command Modes

EXEC

Command History

Release Modification
Release 4.3.0

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

Task ID

Task ID Operation

tty-access

read

Examples

The following example shows output of the show tty details command:

RP/0/RSP0/CPU0:router# show tty details
Mon Sep  3 08:18:19.057 UTC

   Session Id     Exec Pid      Master Pid       PTY Count       Net Count      IBuf Count
Con         0     39280825            ----            ----            ----            ----

Aux         0         8201            ----            ----            ----            ----

   Session Id     Exec Pid      Master Pid       PTY Count       Net Count      IBuf Count
VTY         0      1077467         1077452             642           40582             655 

The following example shows output of the show tty details location 0/RP0/CPU0 command:

RP/0/RSP0/CPU0:router# show tty details location 0/RP0/CPU0
Mon Sep  3 08:20:29.469 UTC

   Session Id     Exec Pid      Master Pid       PTY Count       Net Count      IBuf Count
Con         0     39280825            ----            ----            ----            ----

Aux         0         8201            ----            ----            ----            ----

   Session Id     Exec Pid      Master Pid       PTY Count       Net Count      IBuf Count
VTY         0      1077467         1077452             642           40582             655