Secure Domain Router Commands on the Cisco ASR 9000 Series Router
Secure domain routers (SDRs) are a means of dividing a single physical system into multiple logically separated routers. Cisco ASR 9000 Series Routers are single-shelf routers that only support one SDR—the Owner SDR.
For detailed information about secure domain router concepts, configuration tasks, and examples, see the Configuring Secure Domain Routers on Cisco IOS XR Software module in Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide.
To display information about the currently defined secure domain routers (SDRs), use the show sdr command in EXEC mode or administration EXEC mode.
Administration EXEC Mode
[ namesdr-name [detail] | summary ]
(Optional. Administration EXEC mode only) Specifies a specific SDR.
(Optional) Displays more detailed information for a specific SDR.
(Optional. Administration EXEC mode only) Displays summary information about all SDRs in the system.
Administration EXEC mode:
Displays information for the Owner SDR.
If you are logged into a specific SDR as the admin user, then information about the local SDR is displayed.
Displays information about the local SDR.
This command was introduced.
To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
Use the show sdr command in administration EXEC mode to display the inventory of nodes in the Owner SDR or in a specific named SDR. The show sdr command in EXEC mode displays the inventory of nodes in the current SDR.
This example shows sample output from the show sdr command in EXEC mode:
RP/0/RSP0/CPU0:router# show sdr
Thu Feb 15 04:09:06.179 PST
Type NodeName NodeState RedState PartnerName
RP(0) 0/RSP0/CPU0 IOS XR RUN Active 0/RSP1/CPU0
RP(0) 0/RSP1/CPU0 NOT_PRESENT Standby 0/RSP0/CPU0
LC(2) 0/1/CPU0 IOS XR RUN NONE NONE
LC(2) 0/4/CPU0 IOS XR RUN NONE NONE
LC(2) 0/6/CPU0 IOS XR RUN NONE NONE
Table 1 show sdr Field Descriptions
Type of card, which can be Linecard, RP, or DRP.
Name of the node, expressed in the rack/slot/module notation.
Run state of the card, which can be failure, present, booting, running, and so on.
Redundancy state of the card, which can be active, standby, or none.
Partner of the card, expressed in the rack/slot/module notation.
This example shows sample output from the show sdr command in administration EXEC mode with the summary keyword: