Cisco ASR 9000 Series Aggregation Services Router System Security Command Reference, Release 4.2.x
Lawful Intercept Commands
Downloads: This chapterpdf (PDF - 1.15MB) The complete bookPDF (PDF - 3.75MB) | Feedback

Lawful Intercept Commands

Lawful Intercept Commands

This module describes the Cisco IOS XR software commands used to configure lawful intercept (LI).

For detailed information about keychain management concepts, configuration tasks, and examples, see the Implementing Lawful Intercept inthe Cisco ASR 9000 Series RouterSoftware the Configuration Module .

lawful-intercept disable

To disable the Lawful Intercept (LI) feature, use the lawful-intercept disable command. To re-enable the LI feature, use the no form of this command.

lawful-intercept disable

no lawful-intercept disable

Syntax Description

This command has no keywords or arguments.

Command Default

Lawful intercept feature is not enabled by default.

Command Modes

Global configuration

Command History

Release

Modification

Release 4.1.0

This command is introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

If you disable lawful intercept, all Mediation Devices and associated TAPs are deleted.

Task ID

Task ID

Operations

li

read, write

Examples

This example shows how to configure the lawful-intercept disable command:

RP/0/RSP0/CPU0:router(config)# lawful-intercept disable