To use this command, you must
be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command,
contact your AAA administrator for assistance.
After you create a profile and enter the IPHC profile
configuration mode, you can configure IPHC features in the profile and attach the
profile to multiple interfaces. The maximum number of profiles allowed on a router is
A profile cannot be deleted if it is attached to any
interfaces. You must remove the profile from all interfaces first. Then, delete the
profile using the no form of this command.
On-the-fly modifications to IPHC profiles are not
A profile name cannot exceed 50 characters. If you
attempt to create a profile name that exceeds 50 characters, you receive the following
iphc profile test1test1test1test1test1test1test1test1test1test11 type iphc
!!% 'iphc_profilemgr' detected the 'warning' condition
'Name is longer than allowed character length of 50'