Release Notes for Cisco ASR 9000 Series Routers, IOS XR Release 7.11.1
IOS XR 64-bit on Cisco ASR 9000 Series is the next generation operating system running in a virtualized environment with an underlying 64-bit Linux kernel. Cisco IOS XR operating system delivers greater agility, automation, and simplicity while reducing the cost of operating the networks.
References
For more information about Cisco ASR 9000 Series, see:
What's New in Cisco IOS XR Release 7.11.1
For more details on the Cisco IOS XR release model and associated support, see Software Lifecycle Support Statement - IOS XR.
Software Features Enhanced and Introduced
To learn about features introduced in other Cisco IOS XR releases, select the release from the Documentation Landing Page.
| Feature | Description |
|---|---|
|
Broadband Network Gateway |
|
|
You can now deploy BNG Geo redundancy for access networks connected over a multi-homing EVPN control plane. This enhances redundancy for BNG devices across different geographic locations in the multi-homing EVPN network. The backup BNG device synchronizes the subscriber session state at regular intervals, ensuring seamless continuation of sessions after a failover without the need to establish new connections. This multi-homing EVPN capability guarantees seamless load balancing and failover between devices, providing uninterrupted connectivity for your customers. Previously, BNG Geo redundancy was only available for non-EVPN access networks. This feature introduces these changes: CLI:
YANG Data Model:
(see GitHub, YANG Data Models Navigator) |
|
|
Subscriber Redundancy Group (SRG) offers the advantage of enabling planned switch over or failover for all subscriber groups in case of a failure, proving especially advantageous for subscribers requiring high availability and geo-redundancy as part of their service level agreement (SLA). You can now configure subscriber redundancy group (SRG) for IPoE-LC based subscribers on the following: |
|
|
CGv6 |
|
|
Using Mapping of Address and Port Translation (MAP-T), you can now configure the IPv6 CPE domain prefix length as a non-multiple of eight, which enhances the prefix pool to accommodate a flexible size of the network portion of the IPv6 address. MAP-T also supports non-TCP/UDP/ICMP packets, ICMP error messages, and fragmented packets, which ensure reliable IPv6 connectivity over an IPv4 infrastructure and the other way around. These enhancements are available only on Cisco ASR 9000 Series Fifth Generation high-density Ethernet line cards. The feature introduces these changes: CLI: New
YANG Data Model: Cisco-IOS-XR-se-cgn-cfg (see GitHub, YANG Data Models Navigator) |
|
|
Programmability |
|
|
OpenConfig infrastructure can now reapply all the OpenConfig configurations automatically if there are any discrepancies in the running configuration. With this feature, there is no need for manual replacement of the OpenConfig configuration using Netconf or gNMI. The re-sync operation is triggered if the running configurations and the OpenConfig configuration go out of sync after any system event that removes some running configurations from the system. A corresponding system log gets generated to indicate the re-sync status. |
|
|
This release implements authorization mechanisms to restrict access to gRPC applications and services based on client permissions. This is made possible by introducing an authorization protocol buffer service for gRPC Network Security Interface (gNSI). Prior to this release, the gRPC services in the gNSI systems could be accessed by unauthorized users.This feature introduces the following change: CLI: To view the specification of gNSI, see Github repository. |
|
|
MPLS |
|
|
You can now teardown and reestablish the existing tunnels of headend, midend, or tailend router tunnels of an MPLS network for optimized distribution of the traffic across MPLS and RSVP-TE to improve network performance and enhance resource utilization. Previously, you could reestablish tunnels only at the headend router using the mpls traffic-eng resetup command. The feature introduces these changes: CLI: mpls traffic-eng teardown YANG Data Model: Cisco-IOS-XR-mpls-te-act.yang (see GitHub, YANG Data Models Navigator) |
|
|
Multicast |
|
|
The Designated Forwarder (DF) PE router in an EVPN multi-homed network can now efficiently forward multicast traffic from the source to the interested receivers, avoiding unnecessary replication and reducing network bandwidth consumption. This is made possible by introducing support for Multicast Listener Discovery, MLDv1, and MLDv2 (IPv6) snooping state synchronization for EVPN multi-homing peers or provider edge (PE) devices, expanding the scope of the previous support for IGMP (IPv4) snooping state synchronization. |
|
|
With the ability to now view the route rates or rate of data being forwarded or transmitted per interface, you can monitor your network performance at a granular level, effectively troubleshoot network issues, and have greater control over bandwidth management. Previously, you could view the route rates only at the router level. This feature introduces the following changes:
|
|
|
Netflow |
|
| In this release, we have introduced NetFlow support for IPv6 Pseudowire Headend (PWHE) interfaces. This enhancement helps monitor traffic congestion and make decisions for the efficient operation of networks. This is achieved by providing increased visibility into IPv6 traffic on PWHE interfaces that allows termination of pseudowire connections from legacy non-IP traffic sources and their encapsulation into native IP packets. | |
|
Modular QoS |
|
|
You can now design your infrastructure for low access speeds, allowing your customers to use low-speed Layer 3 VPN services. Your customers can thus deliver these low-speed services to their end-customers, who can use them to connect their branch offices, home-workers, or any other business scenario requiring low-speed services. To achieve these services, we have enabled the configuration of lower minimum values for queue limit and WRED on the fourth and fifth generations of the ASR 9000 Series High Density Ethernet line cards. You can configure lower queue limit values only for 1 Gbps, 10 Gbps, and 400 Gbps interfaces and lower WRED values for 1 Gbps and 10 Gbps interfaces. There’s no action required for you to enable this functionality, and there are no changes to command options. |
|
|
Routing |
|
|
Previously, you could configure a maximum number of Equal-Cost Multi-path (ECMP) to be set for SPF algo 0. This feature provides additional granularity to the IS-IS Maximum Paths Per-Algorithm feature by allowing you to specify a set of prefixes for SPF algo 0. Now you can achieve a balance between path diversity and computational and memory requirements by controlling the number of paths for each specific algorithm and destination prefix combination. This feature introduces these changes: CLI
YANG Data Models:
|
|
|
Now you can enable BGP peering between routers in the sub-AS within a confederation to advertise specific router updates using iBGP. This capability ensures that the mesh of routers between sub-ASes in a confederation maintains consistent routing tables, ensuring proper network reachability. Enabling this feature will improve preventing performance reduction and traffic management challenges. The feature introduces these changes: CLI: New Command: YANG Data Models
(see GitHub, YANG Data Models Navigator) |
|
|
Now you can enable a route policy at the BGP next-hop attach point to limit notifications delivered to BGP for specific prefixes. This enables the network administrators to make better routing decisions. The feature introduces these changes: CLI: Modified Command:
YANG Data Models
(see GitHub, YANG Data Models Navigator) |
|
|
Segment Routing |
|
|
You can now monitor the activeness of multiple paths for a given segment list using flow labels in the SRv6 header. In earlier releases, the SRv6 header didn't include flow labels. The feature introduces these changes: CLI:
YANG Data Models:
See (GitHub, Yang Data Models Navigator) |
|
|
Configure Segment Lists to Activate Candidate Paths in SRv6 for PM Liveness |
You can now enable a candidate path to be up by configuring the minimum number of active segment lists associated with the candidate path. The head-end router determines that a candidate path is up based on the minimum number of active segment lists configured. In earlier releases, the head-end router identified a candidate path as up only when all the segment lists associated with the path were active. The feature introduces these changes: CLI:
YANG Data Models:
See (GitHub, Yang Data Models Navigator) |
|
This feature introduces support for Static and mVPN/Dynamic TreeSID with Flexible Algorithm constraint. Unlike SR-TE point-to-point (P2P) policies, where the primary objective for Flexible Algorithm is to reduce or compress the number of segments on the packet, the objective for Flexible Algorithm-based point-to-multipoint (P2MP) policies:
This feature introduces these changes: CLI
|
|
|
IS-IS Flexible Algorithm with Exclude Maximum Delay Constraint |
This feature enables you to configure topologies that exclude links that have delays over a specific threshold. This is especially critical for high-frequency trading applications, in satellite networks, or wherever there are fluctuations in link delays. This feature introduces these changes: CLI:
YANG Data Model:
|
|
IS-IS Flexible Algorithm with Exclude Minimum Bandwidth Constraint |
Traffic engineering in networks can be optimized by avoiding low-bandwidth links that may not be capable of handling high volumes of traffic. This feature allows you to use Flexible Algorithm to create topologies in your network that explicitly exclude high bandwidth traffic from utilizing links below a specified capacity. This constraint is achieved by introducing a new bandwidth-based metric type within the Flexible Algorithm framework. Links that do not satisfy the constraint are ignored when computing the associated Flexible Algorithm topology. This feature introduces these changes: CLI:
YANG Data Model:
|
|
Previously, you could configure a maximum number of Equal-Cost Multi-path (ECMP) to be set for individual Flex Algorithms. This feature provides additional granularity to the IS-IS Maximum Paths Per-Algorithm feature by allowing you to specify a set of prefixes for Flexible Algorithm. Now you can achieve a balance between path diversity and computational and memory requirements by controlling the number of paths for each specific algorithm and destination prefix combination. This feature introduces these changes: CLI:
YANG Data Models:
|
|
|
Currently, when SR Microloop Avoidance for IS-IS is enabled, it applies to all prefixes. This feature allows you to selectively allow or deny specific IPv4 or IPv6 prefixes or routes that may cause microloops, which allows for efficient use of hardware resources and ensures overall network stability. This feature introduces these changes: CLI:
YANG Data Model:
|
|
|
Microloop Avoidance for OSPFv2 Single-Node Cost-in and Single-Node Cost-out Events |
Microloops disrupt network connectivity and cause suboptimalrouting decisions. This feature avoids microloops by implementing the Greedy walk algorithm, which is similar to TI-LFA computation. This feature extends the microloop avoidance support for additional scenarios in OSPFv2, such as cost-in and cost-out events. This feature introduces these changes: YANG Data Model:
|
|
SR Policy Liveness Monitoring on Segment Routing over IPv6 (SRv6) |
In segment routing over IPv6 (SRv6), you can now verify end-to-end traffic forwarding over an SR policy candidate path by periodically sending probe messages. Performance monitoring on an SRv6 network enables you to track and monitor traffic flows at a granular level. Earlier releases supported SR policy liveness monitoring over an SR policy candidate path on MPLS. |
|
This feature introduces an API solution that simplifies the task of building SR-TE controllers and managing SRTE policies. It does so by defining gRPC API services that allow applications to request SR policy operations. The solution leverages the gRPC Service API and GPB Data models, providing a unified, scalable, and secure method for network programming. This feature introduces these changes: New CLI
YANG Data Models: EMSD Yang model is updated to have this config under "segment-routing" container.
(see GitHub, YANG Data Models Navigator) |
|
|
This feature allows you to configure an SR-TE policy with an explicit path that uses a remote BGP prefix SID as its first segment. This path is achieved by leveraging the recursive resolution of the first SID, which is a BGP-Label Unicast (BGP-LU) SID. BGP-LU labels are used as the first SID in the SR policy to determine the egress paths for the traffic and program the SR-TE forwarding chain accordingly. This allows users to enable Segment Routing to leverage their existing BGP infrastructure and integrate it with the required Segment Routing functionalities. |
|
|
Split Horizon Group (SHG) labels and Ethernet Segment Identifier (ESI) filtering functionalities exist on MPLS underlay networks. This feature introduces ESI filtering functionality to SRv6 underlay networks, using the End.DT2M SRv6 endpoint behavior. This behavior uses the "Arg.FE2" argument for SRv6, which is similar to the SHG label for MPLS. This feature allows nodes to identify BUM traffic based on the advertised ESI and prevent a loop by avoiding re-broadcasting the same traffic back towards the access node. This functionality is enabled by default. |
|
|
This feature enables an SRv6 headend node to allocate and advertise local SIDs with Wide (32-bit) functions (Local W-LIB). The Local W-LIB is supported for Layer 2 EVPN services (ELAN/ELINE) services. Users with a large number of L2 EVPN services can now have a larger address space (local ID block) for local identifiers because this functionality enables an SRv6 headend node to allocate and advertise local SIDs with Wide (32-bit) functions (Local W-LIB). The larger address space for local identifiers ensures efficient address space utilization and better scalability for BGP deployments. This feature introduces the usid allocation wide-local-id-block command. |
|
|
This feature enables an SRv6 headend node to allocate and advertise local SIDs with Wide (32-bit) functions (Local W-LIB). The headend router utilizes the local W-LIB functionality to define and implement SR policies using SRv6 SIDs. The Local W-LIB is supported for Layer 3 (VPNv4/VPNv6/BGPv4/BGPv6 global) services. This feature introduces the usid allocation wide-local-id-block command. |
|
|
Two-Way Active Measurement Protocol Light Source Address Filtering |
You can now restrict unauthorized users from sending packets to the network and prevent compromising the network security and reliability. For a destination UDP port, you can configure the list of IP addresses that can send Two-Way Active Measurement Protocol (TWAMP)-light packets to responder or querier nodes. In earlier releases, the responder or querier node accepted TWAMP-light packets from all IP addresses. The feature introduces these changes: CLI:
YANG Data Models:
See (GitHub, Yang Data Models Navigator) |
|
IP Addresses and Services |
|
|
We have now enabled Layer 3 unicast transport mode in VRRP, allowing it to enhance its capacity to send data to other networks, including cloud networks. Pairwise router redundancy enables high availability in cloud network scenarios. However, a virtual IP (VIP) address is required by the default route of the cloud native function because there is no pre-designated active member in paired routers. HSRP can provide a VIP, but cloud networks do not support Layer 2 multicast or broadcast transports. You can configure VRRP to support Layer 3 unicast transport to overcome the limitation of Layer 2 multicast and broadcast transports. The feature introduces these changes: New Command: CLI: Modified Commands:
YANG Data Model: New Xpaths for:
|
|
|
System Management |
|
|
Hitless FPD Firmware Upgrade for Optical Transceiver Modules |
We now support a hitless FPD firmware upgrade for some optical transceiver modules where the FPD upgrades without shutting down the laser on the optical line card modules. This functionality avoids operational downtime. This process is more efficient and avoids traffic loss. Prior to this release, the FPD upgrades used to shut down the laser. This resulted in traffic loss. This feature is supported on the following variants:
|
|
System Security |
|
|
Multiple Public Keys per User for Public Key-based Authentication |
We provide greater flexibility to access secure routers by allowing four public keys to be used for authentication. With the ability to associate multiple public keys with your user account on the router, we've also simplified the authentication process by eliminating the need to create unique users for each SSH client device. The feature introduces these changes: CLI:
YANG Data Models:
(See GitHub, YANG Data Models Navigator) |
|
System Monitoring |
|
|
Instead of calculating the bytes consumed by Syslog as you did previously, you can now easily and effectively manage the buffer size of the system log messages by specifying the number of entries the system log displays. The feature introduces these changes: CLI:
YANG Data Model:
|
|
YANG Data Models Introduced and Enhanced
This release introduces or enhances the following data models. For detailed information about the supported and unsupported sensor paths of all the data models, see the Github repository. To get a comprehensive list of the data models supported in a release, navigate to the Available-Content.md file for the release in the Github repository. The unsupported sensor paths are documented as deviations. For example, openconfig-acl.yang provides details about the supported sensor paths, whereas cisco-xr-openconfig-acl-deviations.yang provides the unsupported sensor paths for openconfig-acl.yang on Cisco IOS XR routers.
You can also view the data model definitions using the YANG Data Models Navigator tool. This GUI-based and easy-to-use tool helps you explore the nuances of the data model and view the dependencies between various containers in the model. You can view the list of models supported across Cisco IOS XR releases and platforms, locate a specific model, view the containers and their respective lists, leaves, and leaf lists presentedvisually in a tree structure.
| Feature | Description |
|---|---|
|
Programmability |
|
|
openconfig-system.yang Version 0.13.1 |
This OpenConfig data model is revised from version 0.6.0 to 0.13.1. There are no functional changes between these two versions. |
|
openconfig-vlan.yang Version 3.2.2 |
This OpenConfig data model is revised from version 3.2.0 to 3.2.2. There are no functional changes between these two versions. |
|
openconfig-mpls-static.yang Version 3.3.0 |
The OpenConfig data model is revised from version 3.2.2 to 3.3.0. There are no functional changes between these two versions. |
|
openconfig-network-instance.yang Version 1.3.0 |
This OpenConfig data model introduces the following changes to the BGP container:
|
|
openconfig-lldp.yang |
This OpenConfig data model supports streaming model-driven telemetry (MDT) data for the leaves deviated in the previous releases. You can stream cadence-driven telemetry data for the following nodes:
You can stream event-driven telemetry (EDT) data for system-name, system-description, chassis-id, and chassis-id-type leaves. |
|
openconfig-mpls-igp.yang Version 3.3.0 |
This OpenConfig data model is revised from version 2.3.0 to 3.3.0. There are no functional changes between these two versions. |
|
openconfig-if-tunnel.yang |
This release introduces streaming model-driven telemetry (MDT) data for the operational state of source, destination, time-to-live (hop limit) and GRE key of tunnel interfaces using src, dest, ttl, and gre-key nodes respectively. |
|
openconfig-spanning-tree.yang |
This release introduces support for the following OpenConfig data models to define the configuration for Spanning Tree Protocol (STP):
Using these data models, you can configure STP for a loop free topology within Ethernet networks, allowing redundancy within the network to deal with link failures. Rapid STP (RSTP) and streaming telemetry data for the operational state of nodes is not supported. |
|
openconfig-mpls-te.yang Version 3.3.0 |
This OpenConfig data model, which is part of the openconfig-network-instance.yang data model is revised from version 3.0.1 to 3.3.0. There are no functional changes between these two versions. |
|
openconfig-mpls-rsvp.yang Version 4.0.0 |
This OpenConfig data model, which is part of the openconfig-network-instance.yang data model is revised from version 3.0.2 to 4.0.0. There are no functional changes between these two versions. |
|
openconfig-procmon.yang version 0.4.0 |
This OpenConfig data model is revised from version 0.3.1 to 0.4.0. It is used to retrieve the operational data for processes running on a node. It is introduced to support the openconfig-system.yang data model to configure the following xpaths:
|
|
openconfig-mpls.yang Version 3.3.0 |
This OpenConfig data model is revised from version 3.2.2 to 3.3.0. It is a part of the openconfig-network-instance.yang data model and introduces the following leaves:
You can stream model-driven telemetry data (MDT) for the operational state of the nodes. |
|
openconfig-mpls-types.yang Version 3.4.0 |
This OpenConfig data model, which is part of the openconfig-network-instance.yang data model is revised from version 3.2.0 to 3.4.0. There are no functional changes between these two versions. |
|
Cisco-IOS-XR-se-cgn-cfg |
This Cisco native YANG data model lets you to configure MTUs for a specific service or a network. It allows you to configure the next-hop service set for a redirection to another router, which can handle the fragmentation for IPv4 or IPv6 MAP-T traffic |
|
openconfig-platform.yang |
This OpenConfig data model supports improved cadence of under 30 seconds to stream cadence-driven telemetry data for the operational state of the following components—power supply, fan, software modules, linecards and subcomponents. Event-driven telemetry is already supported for these components in the previous releases. |
|
openconfig-network-instance.yang |
This OpenConfig data model introduces cadence-driven telemetry support to obtain and monitor the total active route counts
on IPv4 or IPv6 default tables in a route processor using Model-driven telemetry (MDT) sensor subscription can be enabled. Event-driven telemetry and Netconf protocol for default VRF table are not supported. |
|
Cisco-IOS-XR-um-performance-measurement-cfg.yang |
This unified data model is enhanced as follows:
|
|
Cisco-IOS-XR-perf-meas-oper.yang |
This native data model is enhanced as follows:
|
|
Cisco-IOS-XR-infra-xtc-agent-cfg.yang |
This native data model is enhanced with a new leaf, minimum-active-segment-lists, to configure the minimum number of active segment lists associated with the candidate path. |
|
Cisco-IOS-XR-crypto-act.yang |
This native data model is enhanced with a new leaf,
The data model supports the following values for the key-num leaf:
|
|
Cisco-IOS-XR-um-ssh-cfg.yang |
This unified data model is enhanced with the following new leaves under the
|
|
openconfig-aft.yang Revision 0.9.0 |
The Abstract Forwarding Table (AFT) OpenConfig data model is enhanced to support the following features:
You can stream Event-driven telemetry (EDT) data. |
Hardware Introduced
No new hardware introduced in this release.
Caveats
|
Bug ID |
Headline |
|---|---|
|
Due to high frequency ACL deny log messages, logging buffer wrapping up fast |
Supported Packages and System Requirements
Feature Set (Software Images)
Visit the Cisco Software Download page to download the Cisco IOS XR software.
Cisco IOS XR 64 bit
This table lists the feature set matrix (ISO and RPM files) and associated filenames available for the Cisco IOS XR 64 bit 7.11.1 Release supported on the Cisco ASR 9000 Series Aggregation Services Router.
|
Feature Set |
Filename |
Description |
|---|---|---|
|
Cisco IOS XR IP/MPLS Core Software [for RSP and RP systems] |
ASR9K-x64-iosxr-px-7.11.1.tar |
|
|
Cisco IOS XR IP/MPLS Core Software 3DES [for RSP and RP systems] |
ASR9K-x64-iosxr-px-k9-7.11.1.tar |
|
|
Cisco IOS XR IP Unicast Routing Core Bundle and Migration to IOS XR 64 bit tar image |
asr9k-mini-x64-migrate_to_eXR.tar-7.11.1 |
Contains the required core packages, including OS, Admin, Base,Forwarding, Modular Services Card, Routing, FPD, SNMP Agent, and Alarm Correlation. Contains mini.iso file for XR 64 bit 7.11.1 and additional software for migration to 64 bit. |
|
Composite Package |
||
|
Feature Set |
Filename |
Description |
|
Cisco IOS XR IP Unicast Routing Core Bundle |
asr9k-mini-x64-7.11.1.iso |
Contains the required core packages, including OS, Admin, Base,Forwarding, Modular Services Card, Routing, FPD, SNMP Agent, and Alarm Correlation. The mini iso file is used for upgrading to the new release. |
| Individually-Installable Optional Packages | ||
|
Feature Set |
Filename |
Description |
|
Cisco IOS XR 64 bit EIGRP package |
asr9k-eigrp-x64-1.0.0.0-r7111.x86_64.rpm |
Includes EIGRP protocol support software |
|
Cisco IOS XR BNG Package |
asr9k-bng-x64-1.1.0.0-r7111.x86_64.rpm |
Includes binaries to support BNG features. |
|
Cisco IOS XR 64 bit ISIS package |
asr9k-isis-x64-1.1.0.0-r711.x86_64.rpm |
Includes IS-IS Link state protocol support software |
|
Cisco IOS XR 64 bit OSPF package |
asr9k-ospf-x64-1.1.0.0-r711.x86_64.rpm |
Includes OSPF link state protocol support software |
|
Cisco IOS XR Manageability Package |
asr9k-mgbl-x64-3.0.0.0-r7111.x86_64.rpm |
CORBA2 agent, XML3 Parser, and HTTP server packages. This RPM also contains some SNMP MIB infrastructure. Certain MIBs won't work if this RPM is not installed. IPSLA and environment MIBs are part of the mgbl rpm. |
|
Cisco IOS XR 64 bit MPLS-TE and RSVP package |
asr9k-mpls-te-rsvp-x64-1.2.0.0-r7111.x86_64.rpm |
MPLS Traffic Engineering (MPLS-TE), Resource Reservation Protocol (RSVP). |
|
Cisco IOS XR 64 bit MPLS Package |
asr9k-mpls-x64-2.1.0.0-r7111.x86_64.rpm |
Label Distribution Protocol (LDP), MPLS Forwarding, MPLS Operations, Administration, and Maintenance (OAM), Link Manager Protocol (LMP), Optical User Network Interface (OUNI) and Layer-3 VPN. |
|
Cisco IOS XR 64 bit Multicast Package |
asr9k-mcast-x64-2.0.0.0-r7111.x86_64.rpm |
Multicast Routing Protocols (PIM, Multicast Source Discovery Protocol [MSDP], Internet Group Management Protocol [IGMP], Auto-RP), Tools (SAP, MTrace), and Infrastructure [(Multicast Routing Information Base [MRIB], Multicast-Unicast RIB [MURIB], Multicast forwarding [MFWD]), and Bidirectional Protocol Independent Multicast (BIDIR-PIM). |
|
Cisco IOS XR 64 bit Optics Package |
asr9k-optic-x64-1.0.0.0-r7111.x86_64.rpm |
Firmware for the optics feature for Cisco ASR 9000 Series Aggregation Services Router Chassis. It enables Transport / OTN feature under interfaces. |
|
Cisco IOS XR 64 bit Lawful Intercept (LI) Package |
asr9k-li-x64-1.1.0.0-r7111.x86_64.rpm |
Includes LI software images. |
|
Cisco IOS XR Security Package |
asr9k-k9sec-x64-3.1.0.0-r7111.x86_64.rpm |
Support for Encryption, Decryption,, Secure Shell (SSH), Secure Socket Layer (SSL), and Public-key infrastructure (PKI). |
|
Cisco IOS XR Satellite Package -ASR9000v |
asr9k-9000v-nV-x64-1.0.0.0-r7111.x86_64.rpm |
Includes RPM to support Cisco ASR9000v Series Router Software and to support Cisco ASR 9000v Series Router as a satellite for Cisco ASR 9000 Series Router |
|
Cisco IOS XR 64 bit Services Package |
asr9k-services-x64-1.0.0.0-r7111.x86_64.rpm |
Includes RPM to support Cisco IOS XR 64-bit inline MAP-T function |
Software Compatibility
Cisco IOS XR Software Release 7.11.1 is compatible with the following Cisco ASR 9000 Series Aggregation Services Router systems.
-
Cisco ASR 9900 Series Chassis
-
Cisco ASR 9922 Chassis
-
Cisco ASR 9912 Chassis
-
Cisco ASR 9910 Chassis
-
Cisco ASR 9906 Chassis
-
Cisco ASR 9904 Chassis
-
Cisco ASR 9903 Chassis
-
Cisco ASR 9902 Chassis
-
Cisco ASR 9901 Chassis
-
-
Cisco ASR 9000 Series Chassis
-
Cisco ASR 9010 Chassis
-
Cisco ASR 9006 Chassis
-
For Cisco license support, please contact your Cisco Sales Representative or Customer Service at 800- 553-NETS (6387) or 408-526-4000. For questions on the program other than ordering, please send e-mail to: cwm-license@cisco.com.
Determining Installed Packages
To determine the version of Cisco IOS XR Software packages installed on your router, log in to the router and enter the show install active summary command:
Cisco IOS XR 64 bit
Router# show install active summary
Label : 7.11.1
Active Packages: 18
asr9k-xr-7.11.1 version=7.11.1 [Boot image]
asr9k-services-x64-1.0.0.0-r7111
asr9k-eigrp-x64-1.0.0.0-r7111
asr9k-9000v-nV-x64-1.0.0.0-r7111
asr9k-m2m-x64-1.0.0.0-r7111
asr9k-bng-x64-1.0.0.0-r7111
asr9k-bng-ipoe-x64-1.0.0.0-r7111
asr9k-bng-pppoe-x64-1.0.0.0-r7111
asr9k-isis-x64-1.0.0.0-r7111
asr9k-mcast-x64-1.0.0.0-r7111
asr9k-mgbl-x64-1.0.0.0-r7111
asr9k-mpls-x64-1.0.0.0-r7111
asr9k-ospf-x64-1.0.0.0-r7111
asr9k-bng-supp-x64-1.0.0.0-r7111
asr9k-optic-x64-1.0.0.0-r7111
asr9k-k9sec-x64-1.0.0.0-r7111
asr9k-li-x64-1.0.0.0-r7111
asr9k-mpls-te-rsvp-x64-1.0.0.0-r7111Firmware Support on Cisco IOS XR 64-bit
To check the firmware code running on the Cisco ASR 9000 Series Router, run the show fpd package command in admin mode:
 Note |
The show command output lists supported and EOL hardware PIDs. To know the PIDs that are supported in this release, see the Supported Hardware section in this Release Notes. |
Supported Hardware
The following table lists the supported hardware components on the Cisco ASR 9000 Series Router and the minimum required software versions. For more information, see the Firmware Support section.
All hardware features are supported on Cisco IOS XR Software, subject to the memory requirements specified in the section.
For information on the end-of-sale and end-of-life dates for the Cisco ASR 9000 Series Router hardware, refer to the End-of-Life and End-of-Sale Notices page.
|
Cisco ASR 9000 Series Aggregation Services Router - Route Switch Processor Cards |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
A9K-RSP5-X-SE |
ASR 9000 Series Route Switch Processor 5 for Service Edge, Premium |
Release 7.6.2 |
|
A9K-RSP5-X-TR |
ASR 9000 Series Route Switch Processor 5 for Packet Transport, Premium |
Release 7.6.2 |
|
A9K-RSP5-SE |
ASR 9000 Route Switch Processor 5 for Service Edge |
Release 6.5.15 |
|
A9K-RSP5-TR |
ASR 9000 Route Switch Processor 5 for Packet Transport |
Release 6.5.15 |
|
A9K-RSP880-LT-SE |
Cisco ASR 9000 Series Aggregation Services Router RSP880-Lite, Service Edge Optimized |
Release 6.4.1 |
|
A9K-RSP880-LT-TR |
Cisco ASR 9000 Series Aggregation Services Router RSP880-Lite, Packet Transport Optimized |
Release 6.4.1 |
|
A99-RSP-SE |
Cisco ASR 9000 Series Aggregation Services Router RSP4-S, Service Edge Optimized for ASR 9910 from Release 6.0.1. |
Release 6.2.1 |
|
A99-RSP-TR |
Cisco ASR 9000 Series Aggregation Services Router RSP4-S, Packet Transport Optimized for ASR 9910 from Release 6.0.1. |
Release 6.2.1 |
|
A99-RSP-SE |
Cisco ASR 9000 Series Aggregation Services Router RSP4-S, Service Edge Optimized for ASR 9906 from Release 6.3.1. |
Release 6.3.1 |
|
A99-RSP-TR |
Cisco ASR 9000 Series Aggregation Services Router RSP4-S, Packet Transport Optimized for ASR 9906 supported from Release 6.3.1 |
Release 6.3.1 |
|
A9K-RSP880-SE |
ASR9K Route Switch Processor with 880G/slot and 32 GB for Service Edge |
Release 6.1.2 |
|
A9K-RSP880-TR |
ASR9K Route Switch Processor with 880G/slot and 16 GB for Packet Transport |
Release 6.1.2 |
|
Cisco ASR 9000 Series Aggregation Services Router - Route Processor Cards |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
A99-RP3-X-SE |
ASR 9900 Route Processor 3 for Service Edge, Premium |
Release 7.6.2 |
|
A99-RP3-X-TR |
ASR 9900 Route Processor 3 for Packet Transport, Premium |
Release 7.6.2 |
|
A99-RP3-SE |
ASR 9900 Route Processor 3 for Service Edge |
Release 6.5.15 |
|
A99-RP3-TR |
ASR 9900 Route Processor 3 for Packet Transport |
Release 6.5.15 |
|
A99-RP2-SE |
ASR Route Processor 32 GB for Service Edge |
Release 6.1.2 |
|
A99-RP2-TR |
ASR Route Processor 16 GB for Packet Transport |
Release 6.1.2 |
| Cisco ASR 9901 Router | ||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
| ASR-9901 |
Cisco ASR 9000 Series Aggregation Services Router 2-RU Fixed Port |
Release 6.4.1 |
|
ASR-9901-FAN |
Cisco ASR 9000 Series Aggregation Services Router 2-RU Fixed Port Fan Tray |
Release 6.4.1 |
|
A9K-1600W-AC |
Cisco ASR 9000 Series Aggregation Services Router 2-RU 1600W AC Power Module |
Release 6.4.1 |
|
A9K-1600W-DC |
Cisco ASR 9000 Series Aggregation Services Router 2-RU 1600W DC Power Module |
Release 6.4.1 |
|
Cisco ASR 9902 Router |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
ASR-9902 |
Cisco ASR 9902 2RU Chassis with fixed ports |
Release 7.4.1 |
|
A99-RP-F |
Cisco ASR 9900 Fixed Chassis Route Processor |
Release 7.1.3 |
|
ASR-9902-4P-KIT |
Cisco ASR 9902 4-Post Mounting Kit for 19-Inch and 23-Inch Rack |
Release 7.4.1 |
|
ASR-9902-4P-KIT-L |
ASR 9902 4-Post Mounting Kit for 19 & 23 inch Rack – Long |
Release 7.4.1 |
|
ASR-9902-2P-KIT |
Cisco ASR 9902 2-Post Mounting Kit for 19-Inch and 23-Inch Rack |
Release 7.4.1 |
|
ASR-9902-CAB-MGMT |
Cisco ASR 9902 Cable Management |
Release 7.4.1 |
|
ASR-9902-FILTER |
Cisco ASR 9902 Air Filter |
Release 7.4.1 |
|
ASR-9902-FAN |
Cisco ASR 9902 Fan Tray |
Release 7.4.1 |
|
Cisco ASR 9903 Router |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
ASR-9903 |
Cisco ASR 9903 Compact High-Performance Router with fixed ports and PEC (Port Expansion Card) slot. |
Release 7.1.3 |
|
A99-RP-F |
Cisco ASR 9900 Fixed Chassis Route Processor |
Release 7.1.3 |
|
ASR-9903-FAN |
Cisco ASR 9903 Router Fan Tray |
Release 7.1.3 |
|
ASR-9903-4P-KIT |
ASR 9903 4-Post Mounting Kit for 19-inch Rack |
Release 7.1.3 |
|
ASR-9903-CAB-MGMT |
ASR 9903 Cable Management Brackets |
Release 7.1.3 |
|
ASR-9903-FILTER |
ASR 9903 Air Filter |
Release 7.1.3 |
|
Cisco ASR 9904 Router |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
ASR-9904 |
Cisco ASR 9000 Series Aggregation Services Router 4-Slot 2 Line Card Slot Chassis, 6 RU |
Release 6.1.2 |
|
ASR-9904-AC |
Cisco ASR 9000 Series Aggregation Services Router 4-Slot 2 Line Card Slot AC Chassis w/ PEM V2 |
Release 6.1.2 |
|
ASR-9904-DC |
Cisco ASR 9000 Series Aggregation Services Router 4-Slot 2 Line Card Slot DC Chassis w/ PEM V2 |
Release 6.1.2 |
|
ASR-9904-FAN |
Cisco ASR 9000 Series Aggregation Services Router 4-Slot Fan Tray |
Release 6.1.2 |
|
ASR-9904-FILTER |
Cisco ASR 9000 Series Aggregation Services Router 4-Slot Filter |
Release 6.1.2 |
|
ASR-9904-BAFFLE |
Cisco ASR 9000 Series Aggregation Services Router 4-Slot Baffle |
Release 6.1.2 |
|
Cisco ASR 9912 Router |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
ASR-9912 |
Cisco ASR 9000 Series Aggregation Services Router 12-Slot 10 Line Card Slot Chassis |
Release 6.1.2 |
|
ASR-9912-AC |
Cisco ASR 9000 Series Aggregation Services Router 12-Slot 10 Line Card Slot AC Chassis w/ PEM V2 |
Release 6.1.2 |
|
ASR-9912-DC |
Cisco ASR 9000 Series Aggregation Services Router 12-Slot 10 Line Card Slot DC Chassis w/ PEM V2 |
Release 6.1.2 |
|
A99-SFC3 |
Cisco ASR 9900 Switch Fabric Card 3 |
Release 6.5.15 |
|
A99-SFC2 |
Cisco ASR 9000 Fabric Card |
Release 6.1.2 |
|
ASR-9912-FAN |
Cisco ASR 9000 Series Aggregation Services Router 12-Slot Fan Tray |
Release 6.1.2 |
|
Cisco ASR 9922 Router |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
ASR-9922 |
Cisco ASR 9922 20 Line Card Slot Chassis, 44 RU |
Release 6.1.2 |
|
ASR-9922-AC |
Cisco ASR 9000 Series Aggregation Services Router 22-Slot 20 Line Card Slot AC Chassis w/ PEM V2 |
Release 6.1.2 |
|
ASR-9922-DC |
Cisco ASR 9000 Series Aggregation Services Router 22-Slot 20 Line Card Slot DC Chassis w/ PEM V2 |
Release 6.1.2 |
|
A99-SFC3 |
Cisco ASR 9900 Switch Fabric Card 3 |
Release 6.5.15 |
|
A99-SFC2 |
Cisco ASR 9000 Fabric Card |
Release 6.1.2 |
|
ASR-9922-FAN-V3 |
Cisco ASR 9000 Series Aggregation Services Router 22-Slot Fan Tray version 3 |
Release 6.5.15 |
|
ASR-9922-FLTR-CV2 |
Cisco ASR 9000 Series Aggregation Services Router 22-Slot Air Filter with Media, Center |
Release 6.1.2 |
|
ASR-9922-FLTR-LR |
Cisco ASR 9000 Series Aggregation Services Router 22-Slot Air Filter with Media, Left & Right |
Release 6.1.2 |
|
ASR-9922-RP-FILR |
Cisco ASR 9000 Series Aggregation Services Router 22-Slot Route Processor Filler |
Release 6.1.2 |
|
ASR-9922-FAN-V2 |
Cisco ASR 9000 Series Aggregation Services Router 22-Slot Version 2 Fan Tray |
Release 6.1.2 |
|
Cisco ASR 9006 Router |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
ASR-9006-SYS |
Cisco ASR 9000 Series Aggregation Services Router 6-Slot System |
Release 6.1.2 |
|
ASR-9006-AC-V2 |
Cisco ASR 9000 Series Aggregation Services Router 6-Slot AC Chassis Version 2 |
Release 6.1.2 |
|
ASR-9006-DC-V2 |
Cisco ASR 9000 Series Aggregation Services Router 6-Slot DC Chassis Version 2 |
Release 6.1.2 |
|
ASR-9006-FAN |
Cisco ASR 9000 Series Aggregation Services Router 6-Slot Fan Tray |
Release 6.1.2 |
|
ASR-9006-DOOR |
Cisco ASR 9000 Series Aggregation Services Router 6-Slot Door Kit |
Release 6.1.2 |
|
ASR-9006-FILTER |
Cisco ASR 9000 Series Aggregation Services Router 6-Slot Air Filter |
Release 6.1.2 |
|
Cisco ASR 9906 Router |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
ASR-9906 |
Cisco ASR 9000 Series Aggregation Services Router 6-Slot chassis |
Release 6.3.1 |
|
ASR-9906-FAN |
Cisco ASR 9000 Series Aggregation Services Router 6-Slot Fan Tray |
Release 6.3.1 |
|
ASR-9906-FILTER |
Cisco ASR 9000 Series Aggregation Services Router 6-Slot Fan Filter |
Release 6.3.1 |
|
A99-SFC3-T |
ASR 9906 Switch Fabric Card |
Release 6.5.15 |
|
A99-SFC-T |
ASR 9906 Switch Fabric Card 3 |
Release 6.3.1 |
|
Cisco ASR 9010 Router |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
ASR-9010-SYS |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot System |
Release 6.1.2 |
|
ASR-9010-AC-V2 |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot AC Chassis Version 2 |
Release 6.1.2 |
|
ASR-9010-DC-V2 |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot DC Chassis Version 2 |
Release 6.1.2 |
|
ASR-9010-FAN |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot Fan Tray |
Release 6.1.2 |
|
ASR-9010-DOOR |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot Door Kit |
Release 6.1.2 |
|
ASR-9010-2P-KIT |
Cisco ASR 9000 Series Aggregation Services Router 2 Post Mounting Kit |
Release 6.1.2 |
|
ASR-9010-2P-KIT |
Cisco ASR 9000 Series Aggregration Services Router 4 Post Mounting Kit |
Release 6.1.2 |
|
ASR-9010-FILTER |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot Air Filter |
Release 6.1.2 |
|
Cisco ASR 9910 Router |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
ASR-9910 |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot (9910) System |
Release 6.2.1 |
|
ASR-9910-FAN |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot(9910) Fan Tray |
Release 6.2.1 |
|
ASR-9910-ACC-KIT |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot (9910) Accessory Kit |
Release 6.2.1 |
|
ASR-9910-4P-KIT |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot (9910) 4 Post Rack Mounting Kit |
Release 6.2.1 |
|
ASR-9910-2P-KIT |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot (9910) 2 Post Rack Mounting Kit |
Release 6.2.1 |
|
ASR-9910-AIRREF |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot (9910) Air Reflector |
Release 6.2.1 |
|
ASR-9910-FILTER |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot (9910) Air Filter |
Release 6.2.1 |
|
A99-SFC-S |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot (9910) Switch Fabric Card |
Release 6.2.1 |
|
A99-SFC3-S |
ASR 9910 Switch Fabric Card 3 |
Release 6.5.15 |
|
Cisco ASR 9000 Series Aggregation Services Router - Power Modules |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
PWR-2KW-DC-V2 |
Cisco ASR 9000 Series Aggregation Services Router 2KW DC Power Module, version 2 |
Release 6.1.2 |
|
PWR-3KW-AC-V2 |
Cisco ASR 9000 Series Aggregation Services Router 3KW AC Power Module, version 2 |
Release 6.1.2 |
|
A9K-AC-PEM-V2 |
Cisco ASR 9000 Series Aggregation Services Router AC Power Entry Module Version 2 |
Release 6.1.2 |
|
A9K-DC-PEM-V2 |
Cisco ASR 9000 Series Aggregation Services Router DC Power Entry Module Version 2 |
Release 6.1.2 |
|
A9K-PEM-V2-FILR |
Cisco ASR 9000 Series Aggregation Services Router Power Entry Module Version 2 Filler |
Release 6.1.2 |
|
A9K-AC-PEM-V3 |
Cisco ASR 9000 Series Aggregation Services Router AC Power Enclosure Module Version 3 |
Release 6.1.2 |
|
A9K-DC-PEM-V3 |
Cisco ASR 9000 Series Aggregation Services Router DC Power Enclosure Module Version 3 |
Release 6.1.2 |
|
PWR-6KW-AC-V3 |
Cisco ASR 9000 Series Aggregation Services Router 6kW AC Power Module Version 3 |
Release 6.1.2 |
|
PWR-4.4KW-DC-V3 |
Cisco ASR 9000 Series Aggregation Services Router 4.4kW DC Power Module Version 3 |
Release 6.1.2 |
|
PWR-1.6KW-AC |
ASR 9900 Fixed Chassis AC Power Supply |
Release 7.1.25 |
|
PWR-1.6KW-DC |
ASR 9900 Fixed Chassis DC Power Supply |
Release 7.1.25 |
|
Cisco ASR 9000 Series Aggregation Services Router - Line Cards |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
A9K-4HG-FLEX-SE |
ASR 9000 400GE Combo Service Edge Line Card - 5th Generation |
Release 7.4.1 |
|
A9K-4HG-FLEX-TR |
ASR 9000 400GE Combo Packet Transport Line Card - 5th Generation |
Release 7.4.1 |
|
A99-4HG-FLEX-SE |
ASR 9900 400GE Combo Service Edge Line Card - 5th Generation |
Release 7.4.1 |
|
A99-4HG-FLEX-TR |
ASR 9900 400GE Combo Packet Transport Line Card - 5th Generation |
Release 7.4.1 |
|
A9903-8HG-PEC |
ASR 9903 800G Multi-rate Port Expansion Card |
Release 7.4.1 |
|
A99-10X400GE-X-SE |
ASR 9900 4T Service Edge Line Card - 5th Generation |
Release 7.3.1 |
|
A99-10X400GE-X-TR |
ASR 9900 4T Packet Transport Line Card - 5th Generation |
Release 7.3.1 |
|
A9903-20HG-PEC |
ASR 9903 2T Multi-rate Port Expansion Card |
Release 7.1.3 |
|
A99-32X100GE-X-SE |
ASR 9000 32-Port 100GE QSFP28/QSFP+ Service Edge optimized Line Card - 5th Generation |
Release 7.1.15 |
|
A99-32X100GE-X-TR |
ASR 9000 32-Port 100GE QSFP28/QSFP+ Packet Transport optimized Line Card - 5th Generation |
Release 7.1.15 |
|
A9K-20HG-FLEX-SE A9K-20HG-FLEX-TR |
ASR 9000 2T Combo Line Card - 5th Generation |
Release 7.1.15 |
|
A9K-8HG-FLEX-SE A9K-8HG-FLEX-TR |
ASR 9000 800G Combo Line Card - 5th Generation |
Release 7.1.15 |
|
A9K-16X100GE-TR |
ASR 9000 16-port 100GE QSFP TR line card |
Release 6.5.15 |
|
A99-32X100GE-TR |
ASR 9900 32-port 100GE QSFP TR line card |
Release 6.5.15 |
|
A99-48X10GE-1G-SE |
ASR 9000 48 port dual rate 10G/1G Service Edge line card |
Release 6.5.2 |
|
A99-48X10GE-1G-TR |
ASR 9000 48 port dual rate 10G/1G Transport Optimised line card |
Release 6.5.2 |
|
A99-16X100GE-X-SE |
ASR 9900 16-port 100GE QSFP SE |
Release 6.5.3 |
|
A9K-48X10GE-1G-CM |
ASR 9000 48-port dual-rate 10G/1G Consumption Model line card |
Release 6.4.1 |
|
A9K-24X10GE-1G-CM |
ASR 9000 24-port dual-rate 10G/1G Consumption Model line card |
Release 6.4.1 |
|
A9K-4X100GE |
ASR 9000 4-port 100-Gigabit Ethernet Line Card |
Release 6.4.1 |
|
A9K-48X10GE-1G-SE |
ASR9000 48-port dual-rate 10G/1G service edge–optimized line card |
Release 6.3.2 |
|
A9K-48X10GE-1G-TR |
ASR9000 48-port dual-rate 10G/1G packet transport–optimized line card |
Release 6.3.2 |
|
A9K-24X10GE-1G-SE |
ASR9000 24-port dual-rate 10G/1G service edge–optimized line card |
Release 6.3.2 |
|
A9K-24X10GE-1G-TR |
ASR9000 24-port dual-rate 10G/1G packet transport–optimized line card |
Release 6.3.2 |
|
A99-8X100GE-SE |
ASR 9900 8-port 100GE Service Edge optimized |
Release 6.1.2 |
|
A99-8X100GE-TR |
ASR 9900 8-port 100GE Packet Transport optimized |
Release 6.1.2 |
|
A99-8X100GE-CM |
ASR 9900 8-port 100GE Consumption Model |
Release 6.1.2 |
|
A99-12X100GE |
Cisco ASR 9000 Series Aggregation Services Router 12-Port 100-Gigabit Ethernet Line Card |
Release 6.1.2 |
|
A99-12X100GE-CM |
Cisco ASR 9000 Series Aggregation Services Router 12-port 100GE Ethernet Line card CM |
Release 6.1.2 |
|
A9K-8X100GE-CM |
Cisco ASR 9000 Series Aggregation Services Router 8-Port 100- Gigabit Ethernet, Consumption Model Optimized with CPAK |
Release 6.1.2 |
|
A9K-8X100GE-SE |
Cisco ASR 9000 Series Aggregation Services Router 8-Port 100- Gigabit Ethernet, Service Edge Optimized |
Release 6.1.2 |
|
A9K-8X100GE-TR |
Cisco ASR 9000 Series Aggregation Services Router 8-Port 100-Gigabit Ethernet, Packet Transport Optimized |
Release 6.1.2 |
|
A9K-4X100GE-SE |
Cisco ASR 9000 Series Aggregation Services Router 4--Port 100-Gigabit Ethernet, Service Edge Optimized |
Release 6.1.2 |
|
A9K-4X100GE-TR |
Cisco ASR 9000 Series Aggregation Services Router 4-Port 100- Gigabit Ethernet, Packet Transport Optimized |
Release 6.1.2 |
|
Cisco ASR 9000 Series Aggregation Services Router - Modular Line Cards |
||
|
Part Number |
Cisco ASR 9000 Series Aggregation Services Router 200 Gigabit Modular Line Card, Packet Transport Optimized Cisco ASR 9000 Series Aggregation Services Router 200 Gigabit Modular Line Card, Service Edge Optimized |
Support Initially Provided in IOS XR 64 bit Release |
|
A9K-MOD200-TR A9K-MOD200-SE |
Cisco ASR 9000 Modular 400G Consumption Model Line Card |
Release 6.3.1 |
|
A9K-MOD400-CM |
Cisco ASR 9000 Series Aggregation Services Router 400 Gigabyte Modular Line Card, Service Edge Optimized |
Release 6.2.1 |
| A9K-MOD400-SE |
Cisco ASR 9000 Series Aggregation Services Router 400 Gigabyte Modular Line Card, Packet Transport Optimized |
Release 6.2.1 |
|
A9K-MOD400-TR |
Cisco ASR 9000 Series Aggregation Services Router 200 Gigabit Modular Line Card, Packet Transport Optimized Cisco ASR 9000 Series Aggregation Services Router 200 Gigabit Modular Line Card, Service Edge Optimized |
Release 6.2.1 |
|
Cisco ASR 9000 Series Aggregation Services Router - Modular Port Adapters (MPAs) |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
A9K-MPA-1X200GE |
Cisco ASR 9000 1-port 200-Gigabit Ethernet MPA, requires CFP2-DCO optics |
Release 6.6.2 |
|
A9K-MPA-32X1GE |
Cisco ASR 9000 32-port 1-Gigabit Ethernet MPA with MACSec |
Release 6.6.2 |
|
A9K-MPA20X10GE-CM |
Cisco ASR 9000 20x10GE Consumption Model MPA |
Release 6.5.1 |
|
A9K-MPA2X100GE-CM |
Cisco ASR 9000 2x100GE Consumption Model MPA |
Release 6.5.1 |
|
A9K-MPA-1X100GE |
Cisco ASR 9000 Series Aggregation Services Router 1-port 100-Gigabit Modular Port Adapter |
Release 6.3.1 |
|
A9K-MPA-2X100GE |
Cisco ASR 9000 Series Aggregation Services Router 2-port 100-Gigabit Modular Port Adapter |
Release 6.2.2 |
|
A9K-MPA-20x10GE |
20-Port 10-Gigabit Ethernet Modular Port Adapter with SFP+ |
Release 6.2.1 |
|
A9K-MPA-8X10GE |
Cisco ASR 9000 Series Aggregation Services Router 8-port 10GE Modular Port Adapter |
Release 6.3.2 |
|
A9K-MPA-4X10GE |
Cisco ASR 9000 Series Aggregation Services Router 4-port 10GE Modular Port Adapter |
Release 6.2.1 |
|
A9K-MPA-20X1GE |
Cisco ASR 9000 Series Aggregation Services Router 20-port 1GE Modular Port Adapter |
Release 6.2.1 |
|
A9K-MPA-2X40GE |
Cisco ASR 9000 Series Aggregation Services Router 2-port 40GE Modular Port Adapter |
Release 6.3.1 |
|
Cisco Digital Pluggable Optical Modules |
||
|
CFP2-WDM-DET-1HL= |
200G, 100G, WDM Digital CFP2 pluggable Licensed for 100G only – TOF |
Release 6.6.2 |
|
CFP2-WDM-D-1HL= |
200G, 100G, WDM Digital CFP2 pluggable Licensed for 100G only – NON TOF |
Release 6.6.2 |
|
Cisco ASR 9000v Satellite Shelf |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
A9KV-V2-DC-A= |
Cisco ASR 9000v Satellite Shelf Version 2 DC power ANSI chassis |
Release 6.2.1 |
|
A9KV-V2-DC-E= |
Cisco ASR 9000v Satellite Shelf Version 2 DC power chassis |
Release 6.2.1 |
|
A9KV-V2-AC= |
Cisco ASR 9000v Satellite Shelf AC power chassis |
Release 6.2.1 |
|
A9KV-V2-FAN= |
Cisco ASR 9000v Satellite Shelf Version 2 Fan Tray |
Release 6.2.1 |
|
Cisco NCS 5000 Satellite Shelf |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
NCS-5001 |
Cisco NCS 5001 Series Router |
Release 6.2.1 |
|
NCS-5002 |
Cisco NCS 5002 Series Router |
Release 6.2.1 |
|
NCS-5001-ACSR |
Cisco NCS 5001 Router Accessory Kit |
Release 6.2.1 |
|
NCS-5002-ACSR |
Cisco NCS 5002 Router Accessory Kit |
Release 6.2.1 |
|
NCS-5001-FN-BK |
Cisco NCS 5001 Router Fan Back to Front AirFlow |
Release 6.2.1 |
|
NCS-5002-FN-BK |
Cisco NCS 5002 Router Fan Back to Front AirFlow |
Release 6.2.1 |
|
NCS-5001-FLT-BK |
Cisco NCS 5001 Air Filter Back to Front Airflow |
Release 6.2.1 |
|
NCS-5002-FLT-BK |
Cisco NCS 5002 Air Filter Back to Front Airflow |
Release 6.2.1 |
|
NCS-5001-FN-FR |
Cisco NCS 5001 Fan Front to Back Airflow |
Release 6.2.1 |
|
NCS-5002-FN-FR |
Cisco NCS 5002 Fan Front to Back Airflow |
Release 6.2.1 |
|
NCS-5001-FLT-FR |
Cisco NCS 5001 Air Filter Front to Back Airflow |
Release 6.2.1 |
|
NCS-5002-FLT-FR |
Cisco NCS 5002 Air Filter Front to Back Airflow |
Release 6.2.1 |
Compatibility Matrix for EPNM and Crosswork with Cisco IOS XR Software
The compatibility matrix lists the version of EPNM and Crosswork that are supported with Cisco IOS XR Release in this release.
|
Cisco IOS XR |
Crosswork |
EPNM |
|---|---|---|
|
Release 7.11.1 |
Important Notes
-
Repetitive Smart Licensing evaluation expired warning messages are displayed on the console every hour, but no functionality impact is observed on the device. To stop these repetitive messages, you should register the device again with a new registration token.
-
From IOS XR Release 7.0, 1st and 2nd generation of Ethernet ASR 9000 line cards are not supported.
-
Country-specific laws, regulations, and licenses—In certain countries, use of these products may be prohibited and subject to laws, regulations, or licenses, including requirements applicable to the use of the products under telecommunications and other laws and regulations; customers must comply with all such applicable laws in the countries in which they intend to use the products.
-
Exceeding Cisco testing—If you intend to test beyond the combined maximum configuration tested and published by Cisco, contact your Cisco Account Team or Technical Support representative to discuss how to engineer a large-scale configuration for your purpose.
-
The ISSU SMU for ASR 9000 third-generation line cards will be supported until the Cisco IOS XR Releases 7.11.x only.
-
Installing a Line Card—For a fully populated Line Card with cable optics, maintenance time required for card replacement is higher. For more information about Line Card installation and removal, refer to the Cisco ASR 9000 Aggregation Services Router Ethernet Line Card Installation Guide.
-
For ZTP, In Cisco IOS XR Release 7.3.1 and earlier, the system accepts the device sending user-class = "exr-config"; however starting Cisco IOS XR Release 7.3.2 and later, you must use only user-class = "xr-config".
In Cisco IOS XR Release 7.3.2 and later, use:
host cisco-rp0 { hardware ethernet e4:c7:22:be:10:ba; fixed-address 172.30.12.54; if exists user-class and option user-class = "iPXE" { filename = "http://172.30.0.22/boot.ipxe"; } elsif exists user-class and option user-class = "xr-config" { filename = "http://172.30.0.22/scripts/cisco-rp0_ztp.sh"; } }
Supported Transceiver Modules
To determine the transceivers that Cisco hardware device supports, refer to the Transceiver Module Group (TMG) Compatibility Matrix tool.
Supported Modular Port Adapters
For the compatibility details of Modular Port Adapters (MPAs) on the line cards, see the datasheet of that specific line card.
Production Software Maintenance Updates (SMUs)
A production SMU is a SMU that is formally requested, developed, tested, and released. Production SMUs are intended for use in a live network environment and are formally supported by the Cisco TAC and the relevant development teams. Software bugs identified through software recommendations or Bug Search Tools are not a basis for production SMU requests.
For information on production SMU types, refer the Production SMU Types section of the IOS XR Software Maintenance Updates (SMUs) guide.
Upgrading Cisco IOS XR Software
Cisco IOS XR Software is installed and activated from modular packages, allowing specific features or software patches to be installed, upgraded, or downgraded without affecting unrelated processes. Software packages can be upgraded or downgraded on all supported card types, or on a single card (node).
Software packages are installed from Route Processor Module (RPM) files that contain one or more software components.
The upgrade document is available along with the software images.
Note |
If you have mLACP/ICCP Redundancy Model setup, ensure that you upgrade the active and standby nodes to the same IOS XR version while upgrading to a newer version of the ASR 9000 router. |
Cisco IOS XR Error messages
To view, search, compare, and download Cisco IOS XR Error Messages, refer to the Cisco IOS XR Error messages tool.
Cisco IOS XR MIBs
To determine the MIBs supported by platform and release, refer to the Cisco IOS XR MIBs tool.
Related Documentation
The most current Cisco ASR 9000 router documentation is located at the following URL:
https://www.cisco.com/c/en/us/td/docs/iosxr/asr-9000-series-routers.html
Feedback