Cisco ASR 1000 Series Router Hardware Installation Guide
Cisco ASR 1000 Series Routers Specifications
Downloads: This chapterpdf (PDF - 143.0KB) The complete bookPDF (PDF - 37.41MB) | Feedback

Table of Contents

Cisco ASR 1000 Series Router Specifications

Cisco ASR 1006 Router Specifications

Cisco ASR 1006 Router Memory and Storage Options

Cisco ASR 1006 Router Ethernet RJ-45 Port Pinouts

Cisco ASR 1006 Router MGMT Ethernet Port Pinouts

Cisco ASR 1006 Router BITS Port Signals and Pinouts

Cisco ASR 1006 Router Console Port Signals and Pinouts

Cisco ASR 1006 Router Auxiliary Port Signals and Pinouts

Cisco ASR 1006 Router DB-25 Pinout Assignments for Alarm Relays

Cisco ASR 1004 Router Specifications

Cisco ASR 1004 Router Memory and Storage Options

Cisco ASR 1004 Router Ethernet RJ-45 Port Pinouts

Cisco ASR 1004 Router MGMT Ethernet Port Signals and Pinouts

Cisco ASR 1004 Router Console Port Signals and Pinouts

Cisco ASR 1004 Router Auxiliary Port Signals and Pinouts

Cisco ASR 1004 Router BITS Port Signals and Pinouts

Cisco ASR 1004 Router DB-25 Pinout Assignments for Alarm Relays

Cisco ASR 1002 Router, Cisco ASR 1002-F Router, and Cisco ASR 1002-X Router Specifications

Cisco ASR 1002 Router Mgmt Ethernet RJ-45 Port Pinouts

Cisco ASR 1002 Router Console Port Signals and Pinouts

Cisco ASR 1002 Router Auxiliary Port Signals and Pinouts

Cisco ASR 1002 Router BITS Port Signals and Pinouts

Cisco ASR 1002-X Router BITS Port Signals and Pinouts

Cisco ASR 1002-X Router BNC GPS Ports

Cisco ASR 1002-X Router Time of Day Port Pinout

Cisco ASR 1013 Router Specifications

Cisco ASR 1013 Router Memory and Storage Options

Cisco ASR 1013 Router Ethernet RJ-45 Port Pinouts

Cisco ASR 1013 Router MGMT Ethernet Port Signals and Pinouts

Cisco ASR 1013 Router Console Port Signals and Pinouts

Cisco ASR 1013 Router Auxiliary Port Signals and Pinouts

Cisco ASR 1013 Router BITS Port Signals and Pinouts

Cisco ASR 1013 Router DB-25 Pinout Assignments for Alarm Relays

Cisco ASR 1001 Router Specifications

Cisco ASR 1001 Router Memory and Storage Options

Cisco ASR 1000 Series Router Specifications

This appendix provides router specifications and cable assemblies and pinouts for the cables shipped with the Cisco ASR 1000 Series Aggregation Services Routers.

This appendix contains the following sections:

Cisco ASR 1006 Router Specifications

This section lists the specifications for the Cisco ASR 1006 Router.

Table A-1 lists the Cisco ASR 1006 Router physical specifications.

 

Table A-1 Cisco ASR 1006 Router Specifications

Description
Specification

Midplane

Connects the Cisco ASR 1000 Series RP1, Cisco ASR 1000 Series ESP, Cisco ASR 1000 Series SPA Interface (SIP), SPAs, and power supplies together in the system

Dimensions (H x W x D)

Height = 10.5 in. (25.4 cm)

Width = 17.25 in.(43.815 cm)

Depth = 22.50 in. (57.15 cm)

Weight

  • Fully loaded chassis: 109.1 pounds (49.5 kg)
  • Only chassis: 25 pounds (11.33kg)

Nominal operating temperature

  • 41° to 104° F
  • 5° to 40° C

Nominal operating humidity

10% to 85%

Storage temperature

  • –38° to 150° F
  • –40° to 70° C

Power consumption

  • Maximum DC: 1700W
  • Maximum AC: 1600W
  • Maximum (Out): 1275W

Cisco ASR 1006 Router Memory and Storage Options

Table A-2 lists the hardware memory and storage options supported on the Cisco ASR 1006 Router.

 

Table A-2 Memory and Storage Options for Cisco ASR 1006 Router

Memory Type
Default
Maximum System Support

RP1

2 GB DRAM

4 GBDRAM

eUSB

1 GB (Partitioned: 2x32MB for NVRAM and the remaining for mass storage

Hard disk drive 40 GB for code storage or solid-state drive 32 GB support

Cisco ASR 1006 Router Ethernet RJ-45 Port Pinouts

The Cisco ASR 1006 Router has an RJ-45 port for the 10/100/1000 Ethernet connection. The RJ-45 port supports IEEE 802.3ab (Gigabit Ethernet) and IEEE 802.3u (Fast Ethernet) interfaces compliant with 10BASET, 100BASETX, and 1000BASET specifications.

The RJ-45 port supports standard straight-through and crossover Category 5 UTP cables with RJ-45 connectors. Cisco does not supply Category 5 UTP cables; these cables are available commercially.

Figure A-1 shows an RJ-45 port and connector.

Figure A-1 RJ-45 Port and Connector for Cisco ASR 1006 Router

 

1

RJ-45 connector

Cisco ASR 1006 Router MGMT Ethernet Port Pinouts

Table A-3 lists the RJ-45 port pinout for the front panel Management Ethernet port.

 

Table A-3 RJ-45 Management Ethernet Port Pinouts

Pin
Signal
Direction
Description

1

TX Data+

Out

Transmit Data

2

TX Data–

Out

Transmit Data

3

RX Data+

In

Receive Data

4, 5

NC

6

RX Data–

In

Receive Data

7,8

NC

Cisco ASR 1006 Router BITS Port Signals and Pinouts

Table A-4 lists the pinouts of the Building Integrated Timing Supply (BITS) RJ45 port on the Cisco ASR 1006 Router.

 

Table A-4 BITS RJ-45 Receptacle Pinouts for Cisco ASR1000-RP1

Pin
Signal
Direction
Description

1

RX Ring

Input

Receive Ring

2

RX

Input

Receive (T1/E1)

3, 4

N/C

5

TX Ring

Unused

6

TX

Unused

7,8

N/C

Table A-5 lists the pinouts of the Building Integrated Timing Supply (BITS) and the DOCSIS Timing Interface (DTI) RJ45 port on the Cisco ASR1000-RP2 front panel.

 

Table A-5 BITS RJ-45 Receptacle Pinouts for Cisco ASR1000-RP2

Pin
Signal
Direction
Description

1

RX Ring

Input/Bi (DTI)

Receive Ring/Bidirectional DTI

2

RX TIP

Input/Bi (DTI)

Receive TIP (T1/E1) Bidirectional DTI

3, 4

N/C

5

TX Ring

Output

Transmit Ring/Bidirectional DTI

6

TX

Output

Transmit TIP (T1/E1) Bidirectional DTI

7,8

N/C

Cisco ASR 1006 Router Console Port Signals and Pinouts

Table A-6 lists the pinouts of the dual RJ-45 ports for the front panel console and auxiliary ports.

Table A-6 Console Port Pinouts for Cisco ASR 1006 Router

Pin
Signal
Direction
Description
1

RTS

Out

Request to Send (tied to pin 8, CTS)

2

DTR

Out

Data Terminal Ready (always On)

3

TXD

Out

Transmit Data

4

GND

Ring Indicator

5

GND

6

RXD

In

Receive Data

7

DSR

In

Data Terminal Ready

8

CTS

In

Clear to Send (tied to pin 1, RTS)

Cisco ASR 1006 Router Auxiliary Port Signals and Pinouts

Table A-7 lists the pinouts of the dual RJ-45 ports for the auxiliary port signals.

 

Table A-7 Auxiliary Port Pinouts for Cisco ASR 1006 Router

Pin
Signal
Direction
Description
1

RTS

Out

Request to Send

2

DTR

Out

Data Terminal Ready (always On)

3

TXD

Out

Transmit Data

4

RI

Ring Indicator

5

GND

6

RXD

In

Receive Data

7

DSR/DCD

In

Data Set Ready/Data Carrier Detect

8

CTS

In

Clear to Send

Cisco ASR 1006 Router DB-25 Pinout Assignments for Alarm Relays

The alarm ports for the Cisco ASR 1006 Router (Cisco ASR 1004 Router and Cisco ASR 1013 Router) power supplies reside on the DB-25 connector on the face of the power supply. The alarm ports are relay contact closures that the IOS environmental software controls. The environmental monitoring functions of the system can include voltage and temperature monitoring for the router installed components and failure sensing for power supply fan tray.

Any alarms that light the front panel LEDs on the Cisco ASR1000-RP1 causes a contact closure between the corresponding pins within the DB-25 alarm port of both power supplies. In the DB-25 connector, each alarm consists of a three-pin set containing a common pin, a normally open pin, and a normally closed pin. The connections that describe alarm activity are Alarm off (Common is connected to normally closed and normally open is disconnected) and Alarm on (Common is connected to normally open and normally closed is disconnected).

Table A-8 lists the common, normally open, and normally closed relay contacts accessible to an external alarm monitoring facility by means of the DB-25 connector.

 

Table A-8 Cisco ASR 1006 Router DB-25 Alarm Connector Pinout Assignments

Signal
Description
Common
(CM)
Normally Open (NO)
Normally Closed (NC)
SPARE

CRTAA

Critical Audible Alarm

2

1

14

MAJAA

Major Audible Alarm

16

3

15

MINAA

Minor Audible Alarm

5

4

17

CRTVA

Critical Visual Alarm

19

6

18

MAJVA

Major Visual Alarm

8

7

20

MINVA

Minor Visual Alarm

22

9

21

SPARE

SPARE—unused pin reserved for future use

10, 11, 12, 13, 23, 24, 25

Cisco ASR 1004 Router Specifications

This section lists the specifications for the Cisco ASR 1004 Router.

Table A-9 lists the Cisco ASR 1004 Router physical specifications.

 

Table A-9 Cisco ASR 1004 Router Specifications

Description
Specification

Midplane

Connects the Cisco ASR 1000 Series RP1, ASR 1000 Series ESP, Cisco ASR 1000 Series SPA Interface (SIP), SPAs, and power supplies together in the system

Dimensions (H x W x D)

Height = 7 in. (17.8 cm) (4RU rack-mount per EIA RS-310)

Width = 17.25 in. (43.815 cm) (19 inch rack-mount or optional 23 Telco rack- mount)

Depth = 22.50 in. (57.15 cm) (including card handles, cable-management brackets and power supply handles)

Weight

  • Fully loaded chassis: 50 pounds (22.6796 kg)
  • Only chassis: 18 pounds (8.16 kg)

Nominal operating temperature

  • 41° to 104° F
  • 5° to 40° C

Nominal operating humidity

10% to 85%

Storage temperature

  • –38° to 150° F
  • –40° to 70° C

Power consumption

  • Maximum DC: 1020W
  • Maximum AC: 960W
  • Maximum (Out): 765W

Cisco ASR 1004 Router Memory and Storage Options

Table A-10 lists the hardware memory and storage options supported on the Cisco ASR 1004 Router.

 

Table A-10 Memory and Storage Options for Cisco ASR 1004 Router

Memory Type
Default
Maximum System Support

RP1

2 GB DRAM

4 GBDRAM

eUSB

1 GB (Partitioned: 2x32MB for NVRAM and the remaining for mass storage

For mass storage: hard disk drive 40 GB or solid-state drive 32Gb support

Cisco ASR 1004 Router Ethernet RJ-45 Port Pinouts

The Cisco ASR 1004 Router has RJ-45 port for the 10/100/1000 Ethernet connection. The RJ-45 port supports IEEE 802.3ab (Gigabit Ethernet) and IEEE 802.3u (Fast Ethernet) interfaces compliant with 10BASET, 100BASETX, and 1000BASET specifications.

The RJ-45 port supports standard straight-through and crossover Category 5 UTP cables with RJ-45 connectors. Cisco does not supply Category 5 UTP cables; these cables are available commercially. See Figure A-1 to see an RJ-45 port and connector.

Cisco ASR 1004 Router MGMT Ethernet Port Signals and Pinouts

Table A-11 lists the RJ-45 port pinouts for the front panel Management Ethernet port.

 

Table A-11 RJ-45 Management Ethernet Port Pinouts for the Cisco ASR 1004 Router

Pin
Signal
Direction
Description

1

TX Data+

Output

Transmit Data

2

TX Data–

Output

Transmit Data

3

RX Data+

Input

Receive Data

4, 5

NC

6

RX Data–

Input

Receive Data

7,8

NC

Cisco ASR 1004 Router Console Port Signals and Pinouts

Table A-12 lists the pinouts of the dual RJ-45 ports for the front panel console and auxiliary ports.

Table A-12 Console Port Pinouts for Cisco ASR 1004 Router

Pin
Signal
Direction
Description
1

RTS

Output

Request to Send (tied directly to CTS)

2

DTR

Output

Data Terminal Ready (always On)

3

TXD

Output

Transmit Data

4

GND

Ring Indicator

5

GND

6

RXD

Input

Receive Data

7

DSR

Input

Unused

8

CTS

Input

Clear to Send (tied to RTS)

Cisco ASR 1004 Router Auxiliary Port Signals and Pinouts

Table A-13 lists the pinouts of the dual RJ-45 ports for the auxiliary port signals.

 

Table A-13 Auxiliary Port Pinouts for Cisco ASR 1004 Router

Pin
Signal
Direction
Description
1

RTS

Output

Request to Send

2

DTR

Output

Data Terminal Ready (always On)

3

TXD

Output

Transmit Data

4

RI

Ring Indicator

5

GND

 

6

RXD

Input

Receive Data

7

DSR/DCD

Input

Data Set Ready/Data Carrier Detect

8

CTS

Input

Clear to Send

Cisco ASR 1004 Router BITS Port Signals and Pinouts

Table A-14 lists the pinouts of the front panel Building Integrated Timing Supply (BITS) RJ45 port.

 

Table A-14 BITS RJ-45 Receptacle Pinouts for Cisco ASR 1004 Router

Pin
Signal
Direction
Description

1

RX Ring

Input

Receive Ring

2

RX TIP

Input

Receive TIP (T1/E1)

3, 4

N/C

5

TX Ring

Unused

6

TX TIP

Unused

7,8

N/C

Cisco ASR 1004 Router DB-25 Pinout Assignments for Alarm Relays

Table A-15 lists the common, normally open, and normally closed relay contacts accessible to an external alarm monitoring facility by means of the DB-25 connector.

For more information about the DB-25 alarm connector, see Cisco ASR 1006 Router DB-25 Pinout Assignments for Alarm Relays.

 

Table A-15 Cisco ASR 1004 Router DB-25 Alarm Connector Pinout Assignments

Signal
Description
Common
(CM)
Normally Open (NO)
Normally Closed (NC)
SPARE

CRTAA

Critical Audible Alarm

2

1

14

MAJAA

Major Audible Alarm

16

3

15

MINAA

Minor Audible Alarm

5

4

17

CRTVA

Critical Visual Alarm

19

6

18

MAJVA

Major Visual Alarm

8

7

20

MINVA

Minor Visual Alarm

22

9

21

SPARE

SPARE—unused pin reserved for future use

10, 11, 12, 13, 23, 24, 25

Cisco ASR 1002 Router, Cisco ASR 1002-F Router, and Cisco ASR 1002-X Router Specifications

This section lists the specifications for the Cisco ASR 1002 Router, Cisco ASR 1002-F Router, and Cisco ASR 1002-X Router.


NoteUnless stated otherwise, the specifications for the Cisco ASR 1002-F Router are the same as those for the Cisco ASR 1002 Router except where limited by constrained throughput of 2.5G on the Cisco ASR 1002-F Router. Unless stated otherwise, the specifications for the Cisco ASR 1002-F Router are the same as those for the Cisco ASR 1002 Router except where limited by constrained throughput of 2.5G on the Cisco ASR 1002-F Router.
Similarly, most of the specifications for the Cisco ASR 1002-X Router are the same as the specifications for the Cisco ASR 1002 Router. The differences in specifications have been called out at the relevant places in this section. Some of the Cisco ASR 1002-X Router specifications that are covered in this section are for ports that are specific to that router.


Table A-16 lists the Cisco ASR 1002 Router physical specifications.

 

Table A-16 Cisco ASR 1002 Router Specifications

Description
Specification

Midplane

Connects the Cisco integrated ASR1000-RP1, the ASR 1000 ESP5 or ESP10, SPAs, and power supplies together in the system

Dimensions (H x W x D)

Height: 3.5 in. (8.9 cm)

Width: 17.25 in. (19-inch rack-mount or optional 23 Telco adaptor brackets)

Depth: 22.50 in. (including card handles, cable-management brackets, and power supply handles) for mounting in a 600mm-enclosed cabinet

Weight

  • 40 lbs (18.143 kg) for a fully loaded Cisco ASR 1002 Router or Cisco ASR 1002-F Router
  • 43.35 lbs (19.662 kg) for a fully loaded Cisco ASR 1002-X Router

 

Nominal operating temperature

  • 41° to 104° F
  • 5° to 40° C

Nominal operating humidity

10% to 85%

Storage temperature

  • –38° to 150° F
  • –40° to 70° C

Power consumption

  • Maximum DC: 590W
  • Maximum AC: 560W
  • Maximum (Out): 470W

Cisco ASR 1002 Router Mgmt Ethernet RJ-45 Port Pinouts


NoteUnless stated otherwise, the specifications for the Cisco ASR 1002-X Router are the same as the Cisco ASR 1002 Router specifications listed in this section. Unless stated otherwise, the specifications for the Cisco ASR 1002-X Router are the same as the Cisco ASR 1002 Router specifications listed in this section.


The Cisco ASR 1002 Router has RJ-45 port for the 10/100/1000 Ethernet connections. The RJ-45 port supports IEEE 802.3ab (Gigabit Ethernet) and IEEE 802.3u (Fast Ethernet) interfaces compliant with 10BASET, 100BASETX, and 1000BASET specifications.

The RJ-45 port supports standard straight-through and crossover Category 5 UTP cables with RJ-45 connectors. Cisco does not supply Category 5 UTP cables; these cables are available commercially.

Table A-17 lists the RJ-45 port pinout for the front panel Management Ethernet port.

 

Table A-17 Management Ethernet 10/100/1000 RJ-45 Port Pinouts for Cisco ASR 1002 Router

Pin
Signal
Direction
Description

1

TX Data+

Output

Transmit Data

2

TX Data–

Output

Transmit Data

3

RX Data+

Input

Receive Data

4, 5

NC

6

RX Data–

Input

Receive Data

7,8

NC

Cisco ASR 1002 Router Console Port Signals and Pinouts


NoteUnless stated otherwise, the specifications for the Cisco ASR 1002-X Router are the same as the Cisco ASR 1002 Router specifications listed in this section. Unless stated otherwise, the specifications for the Cisco ASR 1002-X Router are the same as the Cisco ASR 1002 Router specifications listed in this section.


Table A-18 lists the pinout of the dual RJ-45 ports for the front panel console and auxiliary ports.

 

Table A-18 Console Port Pinouts for Cisco ASR 1002 Router

Pin
Signal
Direction
Description
1

RTS

Output

Request to Send (tied to CTS)

2

DTR

Output

Data Terminal Ready (always On)

3

TXD

Output

Transmit Data

4

GND

Ring Indicator

5

GND

6

RXD

Input

Receive Data

7

DSR

Input

unused

8

CTS

Input

Clear to Send (tied to RTS)

Cisco ASR 1002 Router Auxiliary Port Signals and Pinouts


NoteUnless stated otherwise, the specifications for the Cisco ASR 1002-X Router are the same as the Cisco ASR 1002 Router specifications listed in this section. Unless stated otherwise, the specifications for the Cisco ASR 1002-X Router are the same as the Cisco ASR 1002 Router specifications listed in this section.


Table A-19 lists the pinout of the dual RJ-45 ports for the auxiliary port signals.

 

Table A-19 Auxiliary Port Pinouts for Cisco ASR 1002 Router

Pin
Signal
Direction
Description
1

RTS

Output

Request to Send

2

DTR

Output

Data Terminal Ready (always On)

3

TXD

Output

Transmit Data

4

RI

Ring Indicator

5

GND

6

RXD

Input

Receive Data

7

DSR/DCD

Input

Data Set Ready/Data Carrier Detect

8

CTS

Input

Clear to Send

Cisco ASR 1002 Router BITS Port Signals and Pinouts

Table A-20 lists the pinout of the front panel Building Integrated Timing Supply (BITS) RJ45 port.

 

Table A-20 BITS RJ-45 Interface Pinouts for Cisco ASR 1002 Router

Pin
Signal
Direction
Description

1

RX Ring

Input

Receive Ring

2

RX TIP

Input

Receive TIP (T1/E1)

3, 4

N/C

Not used

5

TX Ring

Not used

6

TX TIP

Not used

7,8

N/C

Cisco ASR 1002-X Router BITS Port Signals and Pinouts

Table A-20 lists the pinout of the front panel Building Integrated Timing Supply (BITS) RJ45 port on the Cisco ASR 1002-X Router.

 

Table A-21 BITS RJ-45 Interface Pinouts for Cisco ASR 1002-X Router

Pin
Signal
Direction
Description

1

RX Ring

Input

Receive Ring

2

RX TIP

Input

Receive TIP (T1/E1)

3, 4

N/C

Not used

5

TX Ring

Output

Transmit Ring

6

TX TIP

Output

Transmit TIP (T1/E1)

7,8

N/C

Cisco ASR 1002-X Router BNC GPS Ports

Table A-22 describes the BNC GPS ports on the Cisco ASR 1002-X.

 

Table A-22 GPS Port Pinout

Signal Attribute
10 Mhz (input and output)
1PPS (input and output)

Waveform

Input—Sine wave

Output—Square wave

Input—Pulse shape

Output—Pulse shape

Amplitude

Input— > 1.7 volt p-p
(+8 to +10 dBm)

Output— > 2.4 volts TTL compatible

Input— > 2.4 volts TTL compatible

Output— > 2.4 volts TTL compatible

Impedance

50 ohms

50 ohms

Pulse Width

50% duty cycle

26 microseconds

Rise Time

Input—AC coupled

Output—5 nanoseconds

40 nanoseconds

Cisco ASR 1002-X Router Time of Day Port Pinout

Table A-23 summarizes the pinout of the ToD/1PPS port pinout on the Cisco ASR 1002-X.

 

Table A-23 RJ45 1PPS/ToD Port Pinout

Pin
Signal Name
Direction
Description

1

1PPS_P

Output or Input

1PPS RS422 signal

2

1PPS_N

Output or Input

1PPS RS422 signal

3

RESERVED

Output

Do not use this pin.

4

GND

 

 

5

GND

 

Time of Day character

6

RESERVED

Input

Do not use this pin.

7

TOD_P

Output or Input

Time of Day character

8

TOD_N

Output or Input

Time of Day character

Cisco ASR 1013 Router Specifications

This section lists the specifications for the Cisco ASR 1013 Router. Table A-24 lists the Cisco ASR 1013 Router physical specifications.

 

Table A-24 Cisco ASR 1013 Router Specifications

Description
Specification

Midplane

Connects Cisco ASR1000-RP2, Cisco ASR 1000-ESP40 or Cisco ASR 1000-ESP100, Cisco ASR1000-SIP10 and Cisco ASR1000-SIP40, and power supplies together in the system

Dimensions (H x W x D)

Height: 22.8 in. (579.1 cm)

Width: 17.2 in. (437.4 cm)

Depth: 22 in (558.8 cm) with cable-management bracket and power supply handles included

Weight

  • 184.0 lb (83.46 kg) (with redundant AC power supply, SPA and route processor and SIP blank covers, two embedded services processors, two route processors, six SIPs, and no SPAs)
  • 190.60 pounds (loaded with DC power supplies) (86.45 kg)
  • Total with estimated superslot weights with:

AC power supplies—202 pounds (91.62 kg)

DC power supplies —208.60 (94.61 kg)

Nominal operating temperature

5° to 40° C

Nominal operating humidity

10% to 85%

Storage temperature

  • –38° to 150° F
  • –40° to 70° C

Power consumption (2x Zones)

  • Maximum input (DC): 4,200W
  • Maximum input (AC – High Line): 4,000 W
  • Maximum output (DC and AC – High Line): 3,390 W

Per Power Supply Power Consumption

  • Maximum input (DC): 2100W
  • Maximum input (AC – High Line): 2,000WMaximum input (AC – Low Line): 1,760W
  • Maximum output (DC and AC – High Line): 1,695W
  • Maximum output (AC – Low Line): 1,415W

Cisco ASR 1013 Router Memory and Storage Options

Table A-25 lists the hardware memory and storage options supported on the Cisco ASR 1013 Router.

 

Table A-25 Memory and Storage Options for Cisco ASR 1013 Router

Memory Type
Default
Maximum System Support

R21– DRAM

8 GB

8 GB

FECP – DRAM

1 GB for ASR1000-ESP-5

2 GB for ASR1000-ESP10

2 GB

eUSB – Internal Flash + NVRAM

8 GB on the integrated RP on the Cisco ASR 1002 Router (partitioned: 1 GB for bootflash; 7 GB for mass storage)

8 GB – Not Field Upgradeable

Cisco ASR 1013 Router Ethernet RJ-45 Port Pinouts

The Cisco ASR 1013 Router has RJ-45 port for the 10/100/1000 Ethernet connections. The RJ-45 port supports IEEE 802.3ab (Gigabit Ethernet) and IEEE 802.3u (Fast Ethernet) interfaces compliant with 10BASET, 100BASETX, and 1000BASET specifications.

The RJ-45 port supports standard straight-through and crossover Category 5 UTP cables with RJ-45 connectors. Cisco does not supply Category 5 UTP cables; these cables are available commercially.

Cisco ASR 1013 Router MGMT Ethernet Port Signals and Pinouts

Table A-26 lists the RJ-45 port pinout for the front panel Management Ethernet port.

 

Table A-26 Management Ethernet 10/100/1000 RJ-45 Port Pinouts for Cisco ASR 1013 Router

Pin
Signal
Direction
Description

1

TX Data+

Output

Transmit Data

2

TX Data–

Output

Transmit Data

3

RX Data+

Input

Receive Data

4, 5

NC

6

RX Data–

Input

Receive Data

7,8

NC

Cisco ASR 1013 Router Console Port Signals and Pinouts

Table A-27 lists the pinouts of the dual RJ-45 ports for the front panel console and auxiliary ports.

 

Table A-27 Console Port Pinouts for Cisco ASR 1013 Router

Pin
Signal
Direction
Description
1

RTS

Output

Request to Send (tied to CTS)

2

DTR

Output

Data Terminal Ready (always On)

3

TXD

Output

Transmit Data

4

GND

Ring Indicator

5

GND

6

RXD

Input

Receive Data

7

DSR

Input

unused

8

CTS

Input

Clear to Send (tied to RTS)

Cisco ASR 1013 Router Auxiliary Port Signals and Pinouts

Table A-28 lists the pinouts of the dual RJ-45 ports for the auxiliary port signals.

 

Table A-28 Auxiliary Port Pinouts for Cisco ASR 1013 Router

Pin
Signal
Direction
Description
1

RTS

Output

Request to Send

2

DTR

Output

Data Terminal Ready (always On)

3

TXD

Output

Transmit Data

4

RI

Ring Indicator

5

GND

6

RXD

Input

Receive Data

7

DSR/DCD

Input

Data Set Ready/Data Carrier Detect

8

CTS

Input

Clear to Send

Cisco ASR 1013 Router BITS Port Signals and Pinouts

Table A-29 lists the pinouts of the front panel Building Integrated Timing Supply (BITS) RJ45 port.

 

Table A-29 BITS RJ-45 Interface Pinouts for Cisco ASR 1013 Router

Pin
Signal
Direction
Description

1

RX Ring

Input

Receive Ring

2

RX TIP

Input

Receive TIP (T1/E1)

3, 4

N/C

5

TX Ring

Unused

6

TX TIP

Unused

7,8

N/C

Cisco ASR 1013 Router DB-25 Pinout Assignments for Alarm Relays

Table A-30 lists the common, normally open, and normally closed relay contacts accessible to an external alarm monitoring facility by means of the DB-25 connector.

For more information about the DB-25 alarm connector, see Cisco ASR 1006 Router DB-25 Pinout Assignments for Alarm Relays.

 

Table A-30 Cisco ASR 1013 Router DB-25 Alarm Connector Pinout Assignments

Signal
Description
Common
(CM)
Normally Open (NO)
Normally Closed (NC)
SPARE

CRTAA

Critical Audible Alarm

2

1

14

MAJAA

Major Audible Alarm

16

3

15

MINAA

Minor Audible Alarm

5

4

17

CRTVA

Critical Visual Alarm

19

6

18

MAJVA

Major Visual Alarm

8

7

20

MINVA

Minor Visual Alarm

22

9

21

SPARE

SPARE—unused pin reserved for future use

10, 11, 12, 13, 23, 24, 25

Cisco ASR 1001 Router Specifications

This section lists the specifications for the Cisco ASR 1001 Router. Table A-31 lists the Cisco ASR 1001 Router physical specifications.


NoteThe Cisco ASR 1001 Router has the route processor, embedded services processor, and SIP integrated in the chassis. The Cisco ASR 1001 Router has the route processor, embedded services processor, and SIP integrated in the chassis.


 

Table A-31 Cisco ASR 1001 Router Specifications

Description
Specification

Dimensions (H x W x D)

Height: 1.71 in. (43.43 mm)

Width: 17.3 in. (439.42 mm)

Depth: 22.50 in. (571.5 mm) including card handles, cable-management brackets, and power supply handles)

Weight

  • 23.30 lb (10.6 kg) (with dual AC power and integrated daughter card)
  • 22.70 lb (10.3 kg) (with dual DC power and integrated daughter card)
  • 25 lb fully loaded

Operating temperature

Nominal 5° to 40° C

Nominal operating humidity

10% to 90% non-condensing

Storage temperature

  • –38° to 150° F
  • –40° to 70° C

Power consumption

  • Maximum (DC): 500 W
  • Maximum (AC): 471 W
  • Maximum (Out): 400 W

Cisco ASR 1001 Router Memory and Storage Options

Table A-32 lists the hardware memory and storage options supported on the Cisco ASR 1001 Router.

 

Table A-32 Memory and Storage Options for Cisco ASR 1001 Router

Memory Type
Default
Maximum System Support

ESP

1 GB DRAM default

1 GB DRAM maximum

Route Processor

• Cisco ASR 1001 Route Processor comes with 4 GB DRAM (default)

• Cisco ASR 1001 offers 8 GB Embedded USB memory (EUSB) support (partitioned: two 32-MB for nonvolatile RAM [NVRAM] and the rest for mass storage)

16 GB DRAM maximum

External USB flash memory

1 GB USB flash memory support