Table Of Contents
WIC-1SHDSL and WIC-1SHDSL-V2 Documentation Roadmap
This document provides links to resources for understanding, installing, and configuring the symmetrical high-speed digital subscriber line (SHDSL) ATM WAN interface cards (WICs). Use this document in HTML format on Cisco.com.
Note This is a platform-independent document. To see which routers support these products, refer to the documents in the following section.
Product Information and Supported Hardware and Software
Regulatory Compliance and Safety Information
See also the following chapters of the Cisco Interface Cards Hardware Installation Guide:
•Overview in the hardware installation documentation for your router
•ATM Mode for Two-Wire or Four-Wire SHDSL, Cisco IOS Release 12.3(7)T feature module
•T1/E1 Mode for SHDSL, Cisco IOS Release 12.3(7)T feature module
•Installing the G.SHDSL ATM WIC on the Cisco 1700 Series Router, configuration note
•1-Port G.SHDSL WAN Interface Card for Cisco 2600 Series and Cisco 3600 Series Routers, Cisco IOS Release 12.2(8)T feature module
•1-Port G.SHDSL WAN Interface Card for Cisco 2600 Series Routers, Cisco IOS Release 12.2(4)XL feature module
•Clock Configuration for Cisco 1751/1760 Routers, configuration note
Voice and QoS Features
•Enhanced Voice and QoS for ADSL and G.SHDSL, Cisco IOS Release 12.3(2)T feature module
•Enhanced Voice and QoS for ADSL and G.SHDSL on Cisco 1700 Series, Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers, Cisco IOS Releases 12.2(8)YN and 12.2(13)T feature module
•Voice and Quality of Service Features for ADSL and G.SHDSL on Cisco 1700, Cisco 2600, and Cisco 3600 Series Routers, Cisco IOS Releases 12.2(4)XL and 12.2(13)T feature module
•Configuring CPE Back-to-Back Through G.SHDSL Ports, sample configuration
Copyright © 2004 Cisco Systems, Inc. All rights reserved.