Guest

Support

WIC-2A/S Documentation Roadmap

Hierarchical Navigation

  • Viewing Options

  • PDF (158.1 KB)
  • Feedback
WIC-2A/S Documentation Roadmap

Table Of Contents

WIC-2A/S Documentation Roadmap

Product Information and Supported Hardware and Software

Regulatory Compliance and Safety Information

Hardware Installation

Interface and Line Numbering

Software Configuration

Configuration Examples


WIC-2A/S Documentation Roadmap


Updated 9/21/2004

This document provides links to resources for understanding, installing, and configuring the 2-port asynchronous/synchronous serial WAN interface card (WIC). Use this document in HTML format on Cisco.com.

Product:

WIC-2A/S

2-port asynchronous/synchronous serial WAN interface card



Note This is a platform-independent document. To see which routers support this product, refer to the document in the following section.


Product Information and Supported Hardware and Software

2-Port Async/Sync WAN Interface Card (WIC-2A/S), tech note

Regulatory Compliance and Safety Information

Cisco Network Modules and Interface Cards Regulatory Compliance and Safety Information

Hardware Installation

See the following chapters of the Cisco Interface Cards Hardware Installation Guide:

Installing Cisco Interface Cards in Cisco Access Routers

Connecting Serial WAN Interface Cards to a Network

Interface and Line Numbering

Overview in the hardware installation documentation for your router

Software Configuration

"Configuring Asynchronous Connections" chapter of the Cisco 1700 Series Router Software Configuration Guide

"Configuring Serial Interfaces" chapter of the Cisco IOS Interface Configuration Guide

Configuration Examples

Multilink PPP Across Two Serial Physical-layer Async Interfaces, sample configuration

Configuring PPP Dialin with External Modems, sample configuration