Table Of Contents
WIC-1T and WIC-2T Documentation Roadmap
This document provides links to resources for understanding, installing, and configuring 1- and 2-port serial WAN interface cards (WICs). Use this document in HTML format on Cisco.com.
Note This is a platform-independent document. To see which routers support these products, refer to the documents in the following section.
Product Information and Supported Hardware and Software
Regulatory Compliance and Safety Information
See the following chapters of the Cisco Interface Cards Hardware Installation Guide:
•Overview in the hardware installation documentation for your router
•"Configuring Serial Interfaces" chapter in the Cisco IOS Interface Configuration Guide
•Cisco Signaling Link Terminal G.732 Support, Cisco IOS Release 12.2(2)T feature module
•Cisco Signaling Link Terminal, Cisco IOS Release 12.1(1)T feature module
•Configuring Basic MPLS Using IS-IS, sample configuration
•Inverse MUX Application using Multilink PPP, sample configuration
•Configuring a Basic MPLS VPN, sample configuration
•Multilink Via Virtual-Template on Two Serial Interfaces, sample configuration
Copyright © 2004 Cisco Systems, Inc. All rights reserved.