T1 and E1 IMA Network Modules

Table Of Contents

Connecting Cisco T1 and E1 IMA Network Modules to the Network

IMA Network Modules

Connecting T1/E1 IMA Ports to the Network

IMA Network Module Interface Numbering

T1/E1 IMA Network Module LEDs

Related Documents

Obtaining Documentation, Obtaining Support, and Security Guidelines

Connecting Cisco T1 and E1 IMA Network Modules to the Network

---

Revised: May 1, 2008, OL-12816-01

This guide describes how to connect Cisco T1 and E1 inverse multiplexing for ATM (IMA) network modules to your network. It contains the following sections:

•IMA Network Modules

•Connecting T1/E1 IMA Ports to the Network

•IMA Network Module Interface Numbering

•T1/E1 IMA Network Module LEDs

•Related Documents

•Obtaining Documentation, Obtaining Support, and Security Guidelines

IMA Network Modules

This section provides information about the following network modules:

•4-port T1 IMA network module (NM-4T1-IMA) (see Figure 1)

•8-port T1 IMA network module (NM-8T1-IMA) (see Figure 2)

•4-port E1 IMA network module (NM-4E1-IMA) (see Figure 3)

•8-port E1 IMA network module (NM-8E1-IMA) (see Figure 4)

Each port provides 1.544 Mbps/2.048 Mbps connectivity. The IMA aggregation of multiple T1/E1 links increases bandwidth inexpensively to allow WAN uplinks at speeds ranging up to those of a T3/E3 link.

Figure 1 4-Channel IMA T1 Network Module

Figure 2 8-Channel IMA T1 Network Module

Figure 3 4-Channel IMA E1 Network Module

Figure 4 8-Channel IMA E1 Network Module

Connecting T1/E1 IMA Ports to the Network

To connect a T1/E1 IMA network module to a network, use a straight-through RJ-48C-to-RJ-48C cable to connect the T1 or E1 port to an RJ-48C wall jack. (See Figure 5.)

Figure 5 Connecting a T1/E1 IMA Network Module to an RJ-48C Wall Jack

IMA Network Module Interface Numbering

An individual (ungrouped) interface on the IMA network module is numbered by interface type and slot and port number, for example atm 0/2.

An interface that is part of an IMA group loses its individual port number, but adopts the IMA group number, for example atm 0/ima2.

Up to four groups can be created (numbered 0 through 3).

T1/E1 IMA Network Module LEDs

All network modules have an enable (EN) LED. The enable LED indicates that the module has passed its self-tests and is available to the router. T1/E1 IMA network modules have the additional LEDs shown in Figure 6 and described in Table 1.

Figure 6 T1/E1 IMA Network Module LEDs

Table 1 T1/E1 IMA Network Module LEDs 

LED	Color	Meaning
AL	Yellow	Alarm indicating loss of signal, loss of frame, or unavailability because of excessive errors.
LP	Yellow	Controller local loopback.
CD	Green	Carrier received on telco link.

Related Documents

For additional information, see the following documents and resources.

Related Topic	Document Title
Regulatory compliance and safety information	Cisco Network Modules and Interface Cards Regulatory Compliance and Safety Information http://www.cisco.com/en/US/docs/routers/access/interfaces/rcsi/IOHrcsi.html
Cisco IOS software website and reference documentation	Cisco IOS Software http://www.cisco.com/web/psa/products/index.html?c=268438303

Obtaining Documentation, Obtaining Support, and Security Guidelines

For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

---

CCDE, CCENT, Cisco Eos, Cisco Lumin, Cisco StadiumVision, the Cisco logo, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn is a service mark; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.

All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0804R)

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2008 Cisco Systems, Inc. All rights reserved.