Cisco Router and Security Device Manager 2.5 User Guide
Edit Menu
Downloads: This chapterpdf (PDF - 324.0KB) The complete bookPDF (PDF - 7.45MB) | Feedback

Edit Menu Commands

Table Of Contents

Edit Menu Commands

Preferences


Edit Menu Commands


The following options are available from the Cisco Router and Security Device Manager (Cisco SDM) Edit menu.

Preferences

This screen lets you configure the following Cisco Router and Security Device Manager options:

Preview commands before delivering to router

Choose this option if you want Cisco SDM to display a list of the Cisco IOS configuration commands generated before the commands are sent to the router.

Save signature file to Flash

Choose this option if you want the signature definition file (SDF) that you are working on to be saved to router flash when you click Apply Changes.

Confirm before exiting Cisco SDM

This is Cisco SDM default behavior. Select this option if you would like Cisco SDM to display a dialog box asking for confirmation when you exit Cisco SDM.

Continue monitoring interface status when switching mode/task

This is Cisco SDM default behavior. Cisco SDM begins monitoring interface status when you click Monitor and select Interface status. To have Cisco SDM continue monitoring the interface even if you leave Monitor mode and perform other tasks in Cisco SDM, select this check box and specify the maximum number of interfaces you want Cisco SDM to monitor. The default maximum number of interfaces to monitor is 4.