Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
Cabling Specifications
Downloads: This chapterpdf (PDF - 812.0KB) The complete bookPDF (PDF - 11.67MB) | Feedback

Cabling Specifications

Table Of Contents

Cabling Specifications

2-Port and 4-Port T1 or E1 Feature Card Cable and Port Pinouts

8-Port T1 or E1 Feature Card Cable and Port Pinouts

Attaching the 8-Port T1 or E1 Feature Card Interface Cable to a Bracket (Optional)

CT3 Feature Card Cable and Port Pinouts

Bantam Jack Port Pinouts


Cabling Specifications


This appendix provides cabling and pinout information for feature cards on the Cisco AS5350XM and Cisco AS5400XM universal gateways. It contains the following sections:

2-Port and 4-Port T1 or E1 Feature Card Cable and Port Pinouts

8-Port T1 or E1 Feature Card Cable and Port Pinouts

CT3 Feature Card Cable and Port Pinouts

Bantam Jack Port Pinouts


Note This appendix specifies pinouts only for the pins used. Pins not listed in the tables in this appendix are not connected.


2-Port and 4-Port T1 or E1 Feature Card Cable and Port Pinouts

Table A-1 lists the T1 or E1 feature card port pinouts.

Table A-1 T1 or E1 Feature Card Port Pinouts 

RJ-45 Pin
Description

1

RX tip

2

RX ring

3

RX shield

4

TX tip

5

TX ring

6

TX shield

7

8


Table A-2 lists the cable assemblies available for the T1 and E1 feature cards.

Table A-2 T1 and E1 Cable Assemblies 

Cable Description
Part Number
Product Number

RJ-45 to DB-15

72-1336-01

CAB-E1-RJ45DB15

RJ-45 to DB-15 null

72-1337-01

CAB-E1-RJ45DB15N

RJ-45 to BNC

72-1338-01

CAB-E1-RJ45BNC

RJ-45 to twinax

72-1339-01

CAB-E1-RJ-45TWIN

RJ-45 to RJ-45TE

72-1340-01

CAB-E1-RJ45TE

RJ-45 to RJ-45NT

72-1341-01

CAB-E1-RJ45NT

RJ-45 to RJ-45T1

72-1342-01

CAB-E1-RJ45RJ45

RJ-45 to bare wire

72-1343-01

CAB-T1-RJJ45BARE


Figure A-1 through Figure A-5 show the types of cables that can connect to the RJ-45 connector on the T1 or E1 feature card.

Figure A-1 RJ-45-to-DB-15 Cable Assembly

Table A-3 lists the RJ-45-to-DB-15 cable pinouts.

Table A-3 RJ-45-to-DB-15 Cable Pinouts 

RJ-45 Pin
Signal
Description
Direction
DB-15 Pin

Shield

Ground

Shell/Braid

 

Shell

J1-1

RX Tip

Twisted Pair #1

      <—

J2-3

J1-2

RX Ring

Twisted Pair #1

      <—

J2-11

J1-3

RX Shield

Twisted Pair #3

 

J2-4

J1-4

TX Tip

Twisted Pair #2

      —>

J2-1

J1-5

TX Ring

Twisted Pair #2

      —>

J2-9

J1-6

TX Shield

Twisted Pair #4

 

J2-2


Table A-4 lists the RJ-45-to-DB-15 null modem cable pinouts.

Table A-4 RJ-45-to-DB-15 Null Modem Cable Pinouts 

RJ-45 Pin
Signal
Description
Direction
DB-15 Pin

Shield

Ground

Shell/Braid

 

Shell

J1-1

RX Tip

Twisted Pair #1

      <—

J2-1

J1-2

RX Ring

Twisted Pair #1

      <—

J2-9

J1-3

RX Shield

Twisted Pair #3

 

J2-2

J1-4

TX Tip

Twisted Pair #2

      —>

J2-3

J1-5

TX Ring

Twisted Pair #2

      —>

J2-11

J1-6

TX Shield

Twisted Pair #4

 

J2-4


Figure A-2 RJ-45-to-BNC Cable Assembly for 75-Ohm, Unbalanced Connections

Table A-5 lists the RJ-45-to-BNC cable pinouts.

Table A-5 RJ-45-to-BNC Cable Pinouts 

RJ-45 Pin
Signal
Description
Direction
BNC Pin

Shield

Ground

Shell

 

RX, TX Shields

J1-1

RX Tip

Twisted Pair #1

      <—

RX-Tip

J1-2

RX Ring

Twisted Pair #1

      <—

RX-Shield

J1-3

RX Shield

Twisted Pair #3

 

RX-Shield

J1-4

TX Tip

Twisted Pair #2

      —>

TX-Tip

J1-5

TX Ring

Twisted Pair #2

      —>

TX-Shield

J1-6

TX Shield

Twisted Pair #4

 

TX-Shield


Figure A-3 RJ-45 to Twinax Cable Assembly for 120-Ohm, Balanced Connections

Table A-6 lists the RJ-45 to twinax cable pinouts.

Table A-6 RJ-45 to Twinax Cable Pinouts 

RJ-45 Pin
Signal
Description
Direction
Twinax Pin

Shield

Ground

Shell

 

RX, TX Shields

J1-1

RX Tip

Twisted Pair #1

      <—

RX-1

J1-2

RX Ring

Twisted Pair #1

      <—

RX-2

J1-3

RX Shield

Twisted Pair #3

 

RX Shield

J1-4

TX Tip

Twisted Pair #2

      —>

TX-1

J1-5

TX Ring

Twisted Pair #2

      —>

TX-2

J1-6

TX Shield

Twisted Pair #4

 

TX Shield


Figure A-4 RJ-45-to-RJ-45 Cable Assembly

Table A-7 lists the RJ-45-to-RJ-45 TE cable pinouts.

Table A-7 RJ-45-to-RJ-45 TE Cable Pinouts 

RJ-45 Pin
Signal
Description
Direction
RJ-45 TE Pin

Shield

Ground

Shell/Braid

 

Shield

J1-1

RX Tip

Twisted Pair #1

      <—

J2-1

J1-2

RX Ring

Twisted Pair #1

      <—

J2-2

J1-3

RX Shield

Twisted Pair #3

 

J2-3

J1-4

TX Tip

Twisted Pair #2

      —>

J2-4

J1-5

TX Ring

Twisted Pair #2

      —>

J2-5

J1-6

TX Shield

Twisted Pair #4

 

J2-6


Table A-8 lists the RJ-45-to-RJ-45 NT cable pinouts.

Table A-8 RJ-45-to-RJ-45 NT Cable Pinouts 

RJ-45 Pin
Signal
Description
Direction
Signal
RJ-45 NT Pin

Shield

Ground

Shell/Braid

 

Ground

Shield

J1-1

RX Tip

Twisted Pair #1

      <—

TX Tip

J2-4

J1-2

RX Ring

Twisted Pair #1

      <—

TX Ring

J2-5

J1-3

RX Shield

Twisted Pair #3

 

TX Shield

J2-6

J1-4

TX Tip

Twisted Pair #2

      —>

RX Tip

J2-1

J1-5

TX Ring

Twisted Pair #2

      —>

RX Ring

J2-2

J1-6

TX Shield

Twisted Pair #4

 

RX Shield

J2-3



Note Because the RJ-45-to-RJ-45 cable has polarity, the pinouts differ depending on which end of the cable you use.


Table A-9 lists the RJ-45-to-RJ-45 T1 cable pinouts.

Table A-9 RJ-45-to-RJ-45 T1 Cable Pinouts 

RJ-45 Pin
Signal
Description
Direction
RJ-45 T1 Pin

Shield

Ground

Shell/Braid

 

Shield

J1-1

RX Tip

Twisted Pair #1

      <—

J2-1

J1-2

RX Ring

Twisted Pair #1

      <—

J2-2

J1-3

RX Shield

 

 

 

J1-4

TX Tip

Twisted Pair #2

      —>

J2-4

J1-5

TX Ring

Twisted Pair #2

      —>

J2-5

J1-6

TX Shield

 

 

 


Figure A-5 RJ-45 to Bare Wire Cable Assembly

Table A-10 lists the RJ-45 to bare wire cable pinouts.

Table A-10 RJ-45 to Bare Wire Cable Pinouts 

RJ-45 Pin
Signal
Description
Direction
Bare

Shield

Ground

Braid

 

 

J1-1

RX Tip

Twisted Pair #1

      <—

WIRE-1

J1-2

RX Ring

Twisted Pair #1

      <—

WIRE-2

J1-3

RX Shield

 

 

 

J1-4

TX Tip

Twisted Pair #2

      —>

WIRE-3

J1-5

TX Ring

Twisted Pair #2

      —>

WIRE-4

J1-6

TX Shield

 

 

 


8-Port T1 or E1 Feature Card Cable and Port Pinouts

Figure A-6 shows a diagram of the 8-port T1 or E1 feature card cable assembly.

Figure A-6 8-Port T1 or E1 Feature Card Cable Assembly

Table A-11 lists the 8-port T1 or E1 feature card cable pinouts.

Table A-11 8-Port T1 or E1 Feature Card Cable Pinouts 

Female RJ-45 (CAB-DFC-OCTAL-xMF)
From
Signal
Note
Direction
Signal
To

SHELL

GROUND

SHELL/BRAID

 

GROUND

SHELL

J1-1

J1-2

RX_TIP

RX_RING

Twisted pair #1

Port 7

<------

<------

RX_TIP

RX_RING

J9-1

J9-2

J1-3

J1-4

RX_TIP

RX_RING

Twisted pair #1

Port 6

<------

<------

RX_TIP

RX_RING

J8-1

J8-2

J1-5

J1-6

RX_TIP

RX_RING

Twisted pair #1

Port 5

<------

<------

RX_TIP

RX_RING

J7-1

J7-2

J1-7

J1-8

RX_TIP

RX_RING

Twisted pair #1

Port 4

<------

<------

RX_TIP

RX_RING

J6-1

J6-2

J1-9

J1-10

No Connect

No Connect

No Connect

No Connect

J1-11

J1-12

RX_TIP

RX_RING

Twisted pair #1

Port 3

<------

<------

RX_TIP

RX_RING

J5-1

J5-2

J1-13

J1-14

RX_TIP

RX_RING

Twisted pair #1

Port 2

<------

<------

RX_TIP

RX_RING

J4-1

J4-2

J1-15

J1-16

RX_TIP

RX_RING

Twisted pair #1

Port 1

<------

<------

RX_TIP

RX_RING

J3-1

J3-2

J1-17

J1-18

RX_TIP

RX_RING

Twisted pair #1

Port 0

<------

<------

RX_TIP

RX_RING

J2-1

J2-2

J1-19

J1-20

TX_TIP

TX_RING

Twisted pair #2

Port 7

------>

------>

TX_TIP

TX_RING

J9-4

J9-5

J1-21

J1-22

TX_TIP

TX_RING

Twisted pair #2

Port 6

------>

------>

TX_TIP

TX_RING

J8-4

J8-5

J1-23

J1-24

TX_TIP

TX_RING

Twisted pair #2

Port 5

------>

------>

TX_TIP

TX_RING

J7-4

J7-5

J1-25

J1-26

TX_TIP

TX_RING

Twisted pair #2

Port 4

------>

------>

TX_TIP

TX_RING

J6-4

J6-5

J1-27

J1-28

No Connect

No Connect

No Connect

No Connect

J1-29

J1-30

TX_TIP

TX_RING

Twisted pair #2

Port 3

------>

------>

TX_TIP

TX_RING

J5-4

J5-5

J1-31

J1-32

TX_TIP

TX_RING

Twisted pair #2

Port 2

------>

------>

TX_TIP

TX_RING

J4-4

J4-5

J1-33

J1-34

TX_TIP

TX_RING

Twisted pair #2

Port 1

------>

------>

TX_TIP

TX_RING

J3-4

J3-5

J1-35

J1-36

TX_TIP

TX_RING

Twisted pair #2

Port 0

------>

------>

TX_TIP

TX_RING

J2-4

J2-5

J1 connector is male 36-position plug, J2-J9 connectors are female RJ-45 receptacles


Attaching the 8-Port T1 or E1 Feature Card Interface Cable to a Bracket (Optional)

To attach the 8-port T1 or E1 cable to a bracket:


Step 1 Place the molded RJ-45 end of the cable on the bracket with the RJ-45 ports facing you. Align the two holes on the molded RJ-45 end of the cable with the holes on the bracket. (See Figure A-7.)

Figure A-7 Placing the Molded RJ-45 End of the Cable on the Bracket

Step 2 You can align the molded RJ-45 ends of the cables in one of the following ways:

Place the molded RJ-45 ends of the cables next to each other. This placement creates space between the last molded RJ-45 end of the cable and the edge of the bracket adjacent to it. Route the cables through this space. (See Figure A-8.)

Figure A-8 Routing Cables with Molded RJ-45 Ends of Cables Next to Each Other

Align the molded RJ-45 ends of the cables with an opening between the adjacent molded RJ-45 ends of the cable. Route the cables through the openings. (See Figure A-9.)

Figure A-9 Routing Cables with Molded RJ-45 Ends of Cables Flush with Bracket Edges

Step 3 Secure the molded RJ-45 ends of the cables to the bracket with the provided flathead screws. (See Figure A-10.)


Note To secure a single molded RJ-45 end of the cable, use the short flathead screws. To secure two (stacked) molded RJ-45 ends of the cables, use the long flathead screws.


Figure A-10 Securing the Cable Bracket to the Rack

Step 4 Use the end screws on the bracket to secure the cable bracket to the rack. (See Figure A-10.)

Step 5 Insert the 36-pin cable connector into the 36-pin port on the 8-port T1 or E1 feature card. Tighten the captive screws on the 36-pin cable connector to secure the cable to the feature card. (See Figure A-11.)

Figure A-11 Connecting the 36-Pin Cable Connector to an 8-Port T1 or E1 Feature Card


CT3 Feature Card Cable and Port Pinouts

Table A-12 lists the CT3 feature card port pinouts.

Table A-12 CT3 Feature Card Port Pinouts

Pin
Description

Receiver port (on the left)

1

Rx signal

2

Ground

Transmitter port

1

Tx signal

2

Ground


Figure A-12 shows a diagram of the CT3 feature card cable assembly.

Figure A-12 CT3 Feature Card Cable Assembly

Bantam Jack Port Pinouts

Table A-13 lists the bantam jack port pinouts.

Table A-13 Bantam Jack Port Pinouts

Pin
Description

1

Tip

2

Ring