Table Of Contents
Cisco 1800 Series Integrated Services Router (Modular) Quick Start Guide
Cisco One-Year Limited Hardware Warranty Terms
Documents, Equipment, and Tools
Items Included with Cisco 1841 Routers
Installing the Router on a Desktop
Console, Auxiliary, and USB Port Connections
Verify the Front Panel LED Indications
Verify the Hardware Configuration
Initial Configuration Using Cisco Router and Security Device Manager
Initial Configuration Using Setup Command Facility
Initial Configuration Using Cisco CLI—Manual Configuration
Verify the Initial Configuration
Obtaining Technical Assistance
Cisco Technical Support Website
Definitions of Service Request Severity
Obtaining Additional Publications and Information
Quick Start Guide
Cisco 1800 Series Integrated Services Router (Modular) Quick Start Guide
INCLUDING LICENSE AND WARRANTY1 Cisco One-Year Limited Hardware Warranty Terms
There are special terms applicable to your hardware warranty and various services that you can use during the warranty period. Your formal Warranty Statement, including the warranties and license agreements applicable to Cisco software, is available on Cisco.com. Follow these steps to access and download the Cisco Information Packet and your warranty and license agreements from Cisco.com.
1. Launch your browser, and go to this URL:
http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm
The Warranties and License Agreements page appears.
2. To read the Cisco Information Packet, follow these steps:
a. Click the Information Packet Number field, and make sure that the part number 78-5235-03A0 is highlighted.
b. Select the language in which you would like to read the document.
c. Click Go.
The Cisco Limited Warranty and Software License page from the Information Packet appears.
d. Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF).
Note You must have Adobe Acrobat Reader to view and print PDF files. You can download the reader from Adobe's website: http://www.adobe.com
3. To read translated and localized warranty information about your product, follow these steps:
a. Enter this part number in the Warranty Document Number field:
78-10747-01C0.
b. Select the language in which you would like to view the document.
c. Click Go.
The Cisco warranty page appears.
d. Review the document online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF).
You can also contact the Cisco service and support website for assistance:
http://www.cisco.com/en/US/support/
Duration of Hardware Warranty
One (1) Year
Replacement, Repair, or Refund Policy for Hardware
Cisco or its service center will use commercially reasonable efforts to ship a replacement part within ten (10) working days after receipt of a Return Materials Authorization (RMA) request. Actual delivery times can vary, depending on the customer location.
Cisco reserves the right to refund the purchase price as its exclusive warranty remedy.
To Receive a Return Materials Authorization (RMA) Number
Contact the company from whom you purchased the product. If you purchased the product directly from Cisco, contact your Cisco Sales and Service Representative.
Complete the information below, and keep it for reference.
Company product purchased from
Company telephone number
Product model number
Product serial number
Maintenance contract number
2 Overview
The Cisco 1800 series integrated services routers includes the Cisco 1841 router, which is a data-only router. Cisco 1841 routers support WAN interface cards (WIC), voice/WAN interface cards (VWICs) in data mode only, single-wide high-speed WAN interface cards (HWICs), and advanced integration module (AIMs). This router has two WIC/VWIC/HWIC slots.
Note The interface numbering for this Cisco 1841 router is different from the numbering in Cisco 1700 series routers. (See the "Interface Numbering" section.)
This document provides the minimum necessary information to help you install the router, power it up, and configure a network connection. This document directs you to other documents for the following information:
•More detailed router installation instructions, descriptions, and specifications
•Procedures for installing modules, interface cards, power supplies, and memory
•Software configuration
•Regulatory compliance and safety information
Product Serial Number Location
The serial number label for the Cisco 1841 router is located on the rear of the chassis, underneath interface card slot 0.
For detailed product serial number location on the chassis, refer to the online Cisco 1800 series hardware installation documentation at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1800/hw/index.htm
Cisco Product Identification Tool
The Cisco Product Identification (CPI) tool provides detailed illustrations and descriptions showing where to locate serial number labels on Cisco products. It includes the following features:
•A search option that allows browsing for models using a tree-structured product hierarchy
•A search field on the final results page making it easier to look up multiple products
•End of sale products are clearly identified in results lists
The tool streamlines the process of locating serial number labels and identifying products. Serial number information expedites the entitlement process and is important for access to support services.
The Cisco Product Identification tool can be a ccessed at the following URL:
http://tools.cisco.com/Support/CPI/index.do
3 Documents, Equipment, and Tools
User Documentation
For complete platform documentation, refer to the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1800/index.htm
All the documents referenced in this quick start guide are available on Cisco.com. See the "Where to Go Next" section. To view or print an online document in its original page format, click the PDF icon.
Translated Versions
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1800/qsg/index.htm
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1800/qsg/index.htm
Items Included with Cisco 1841 Routers
Your router package should include the following items in addition to the router:
•One blue RJ-45-to-DB-9 console cable; one DB-9-to-DB-25 modem adapter
•Power cord
•Regulatory Compliance and Safety Information for Cisco 1840 Routers document
•Cisco Router and Security Device Manager (SDM) Quick Start Guide document
•Cisco 1800 Series Integrated Services Routers (Modular) Quick Start Guide (this document)
Items Not Included
Individual items in this list may be required for your installation:
•PC with Hyperterminal or similar terminal emulation program, or a modem for remote administrative access
•Cables for WAN interfaces, LAN interfaces, or USB interface
•Cable ties, number 2 Phillips screwdriver
•Other typical equipment, such as channel service unit/data service unit (CSU/DSU); NT1 device for ISDN-BRI S/T; Ethernet hub; USB devices
Note The onboard USB ports (version 1.1) support only USB devices approved and qualified by Cisco.
Note The USB port (version 1.1) is intended for future use only.
4 Install Chassis
This section contains basic installation procedures. For more detailed installation instructions, refer to the Cisco 1800 series hardware installation documentation at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1800/hw/index.htm
Safety Information
The Regulatory Compliance and Safety Information for Cisco 1840 Routers document contains translations of the warnings that appear in this quick start guide.
For safety information you must know before working on your Cisco router, refer to the Regulatory Compliance and Safety Information for Cisco 1840 Routers document that accompanied this device.
Warning Definition
Warning Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord. Statement 1
Warning Read the installation instructions before connecting the system to the power source. Statement 1004
Warning
Take care when connecting units to the supply circuit so that wiring is not overloaded. Statement 1018
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030
Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040
Warning To prevent the system from overheating, do not operate it in an area that exceeds the maximum recommended ambient temperature of 40 deg. Statement 1047
Warning There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. Statement 1015
Installing the Router
Note Cisco 1800 series routers are normally ordered with modules and interface cards. Before you remove or install any modules or interface cards, refer to the documents that accompany those items or to the online Cisco 1800 series hardware installation documentation at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1800/hw/index.htm
You can set any Cisco 1800 series router on a desktop. See the applicable instructions in the following section:
•Installing the Router on a Desktop
Caution To prevent damage to the chassis, never attempt to lift or tilt the chassis by the plastic panel on the front. Always hold the chassis by the metal body.
Installing the Router on a Desktop
The Cisco 1841 router is shipped with the rubber feet attached to the chassis.
Caution Your chassis installation must allow unrestricted airflow for chassis cooling. For placing on a desktop, keep at least one inch of clear space beside the cooling inlet and exhaust vents.
Caution Do not place any items that weigh more than 10 pounds (4.5 kilograms) on top of the chassis, and do not stack routers on top of each other.
Grounding the Chassis
Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94
Warning This equipment needs to be grounded. Use a green and yellow 14 AWG ground wire to connect the host to earth ground during normal use. Statement 190
To connect the chassis to a reliable earth ground, using a ring terminal and size 14 AWG (2 mm2) wire, follow these steps:
Step 1 Strip one end of the ground wire to expose approximately 3/4 inch (20 mm) of conductor.
Step 2 Crimp the 14 AWG green ground wire to a UL Listed/CSA certified ring terminal, using a crimping tool that is recommended by the ring terminal manufacturer. The ring terminal provided on the back panel of the router is suitable for a No. 6 grounding screw.
Step 3 Attach the ring terminal to the chassis as shown in Figure 1. Use a number 2 Phillips screwdriver and the screw supplied with the ring terminal. Tighten the screw to a torque of 8 to 10 inch-pounds (0.9 to 1.1 newton meters.)
Step 4 Connect the other end of the ground wire to a known good electrical grounding point such as a service panel grounding lug. Consult a licensed electrician if you have any questions about the suitability of the ground connection.
Figure 1 Chassis Ground Connection on the Cisco 1841 Router
5 Connecting Cables
Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001
This section provides an overview of the cabling for different ports and connections on the Cisco 1841 router.
For detailed information on the connections, cables, and pinouts, refer to the following documents:
•Cisco Interface Cards Installation Guide at the following URL:
•Cisco Modular Access Router Cable Specifications at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis3600/hw_inst/cabling/marcabl.htm
WAN and LAN Connections
The connections and cables listed in Table 1 are described in detail in the Cisco 1800 series hardware installation documents at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1800/hw/index.htm
Caution Do not connect a WAN, telephone, or fax cable to an interface card until you have completed the installation procedure.
Warning Hazardous network voltages are present in WAN ports regardless of whether power to the router is OFF or ON. To avoid electric shock, use caution when working near WAN ports. When detaching cables, detach the end away from the router first. Statement 1026
Table 1 summarizes the basic WAN and LAN connections for the Cisco 1841 router.
Table 1 WAN and LAN Connections
Port or Connection Port Type, Color 1 Connected To: CableFast Ethernet (FE)
RJ-45, yellow
Ethernet hub
Crossover to connect to a router
Straight-through to connect to a switch
T1/E1 WAN
RJ-48C
T1 or E1 network or CSU/DSU
RJ-48 T1/E1 straight-through (Crossover to connect ot a PBX or any other equipment)
Cisco serial (1T)
60-pin D-sub, blue
CSU/DSU and serial network or equipment
Cisco serial transition cable that matches the signaling protocol (EIA/TIA-232, EIA/TIA-449, V.35, X.21, or EIA/TIA-530) and the serial port operating mode (DTE or DCE).
Refer to the Cisco Modular Access Router Cable Specifications document for information about selecting these cables.
Cisco Smart serial (2T)
Cisco Smart compact connector, blue
CSU/DSU and serial network or equipment
For WIC-2T and WIC-2A/S only
DSL
RJ-11C/RJ-14C
Network demarcation device for service provider's DSL interface
RJ-11 straight-through for 2-wire
RJ-14 straight-through for 4-wire
BRI S/T WAN
(external NT12 )RJ-45, orange
NT1 device or PINX3
RJ-45 straight-through
BRI U WAN
(built-in NT1)RJ-49C/CA-A11, orange
ISDN network
RJ-49 straight-through
Analog modem
RJ-11
PSTN
RJ-11 straight-through
56/64-kbps
CSU/DSU8-pin modular
RJ-48S interface
RJ-48 straight-through
1 The color codes are specific to cables shipped by Cisco
2 NT1 = Network Termination 1
3 PINX = Private integrated network exchange
Console, Auxiliary, and USB Port Connections
The connections described in Table 2 provide system management access.
Note The USB port (version 1.1) is intended for future use only.
Power Connections
Connect the router power cord to a 15A, 120 VAC power source or 10A, 240 VAC power source.
Warning This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 15A, 120VAC (10A, 240VAC). Statement 1005
Note The input voltage tolerance limits for AC power are 85 and 264 VAC.
6 Power Up the Router
Checklist for Power Up
You are ready to power up the Cisco 1841 router after the following steps are completed:
•Chassis is securely mounted and grounded. (See the "Install Chassis" section.)
•Power and interface cables are connected. (See the "Connecting Cables" section.)
•Make sure that the external CompactFlash memory card is properly seated into the slot. For installation instructions, refer to the online Cisco 1800 series hardware installation documentation at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1800/hw/index.htm
•PC with terminal emulation program is connected to the console port, powered up, and configured for 9600 baud, 8 data bits, 1 stop bit, no flow control, and no parity.
•Suitable PC COM port is selected in the terminal emulation program.
Note For initial power up, a direct console connection is recommended. After the initial configuration is completed, a remote modem connection can be used for router management.
Caution To ensure adequate cooling, never operate the router unless the cover and all modules and cover plates are installed.
Caution To prevent damage to the ejector mechanism, the ejector button next to the CompactFlash memory card must remain fully seated when not being used to eject a CompactFlash memory card.
Power-Up Procedure
To power up your Cisco 1841 router and verify that it goes through its initialization and self-test, perform this procedure. When the procedure is finished, the Cisco 1841 router is ready to configure.
Note To view the boot sequence, you must have a console connection to the Cisco 1841 router before it powers up.
Step 1 Make sure that your PC is powered up and connected as described in the "Checklist for Power Up" section.
Step 2 Move the power switch to the ON position. The SYS PWR LED on the front of the chassis blinks green and the fans operate. If this does not happen, refer to the "Troubleshooting" module in the online Cisco 1800 series hardware installation documentation at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1800/hw/index.htm
Startup messages appear in your terminal emulation program window. When the startup messages end, the SYS PWR LED comes on solid green.
Caution Do not press any keys on the keyboard until the messages stop and the SYS PWR LED is solid green. Any keys pressed during this time are interpreted as the first command typed when the messages stop, which might cause the router to power off and start over. It takes a few minutes for the messages to stop.
You may see different startup messages:
•If you see the following messages, the router has booted with a configuration file and is ready for initial configuration using Cisco Router and Security Device Manager (SDM):
yourname con0 is now availablePress RETURN to get started.
Note Because SDM is installed on your router by default, we recommend using SDM to perform the initial configuration.
If SDM is installed on your router, we recommend using SDM to perform the initial configuration. See the "Initial Configuration Using Cisco Router and Security Device Manager" section to learn how to configure your router using SDM, or how to obtain SDM and install it on your router.
•If you see the following messages, the router has booted and is ready for initial configuration using the setup command facility or the command-line interface (CLI):
--- System Configuration Dialog ---At any point you may enter a question mark '?' for help.Use ctrl-c to abort configuration dialog at any prompt.Default settings are in square brackets '[]'.Would you like to enter the initial configuration dialog? [yes/no]:To learn how to use the setup command facility to configure the router, see the "Initial Configuration Using Setup Command Facility" section. To learn how to use the CLI to configure the router, see the "Initial Configuration Using Cisco CLI—Manual Configuration" section.
If the
rommon 1>
prompt appears, your system has booted in ROM monitor mode. For information on using ROM monitor, refer to the "Troubleshooting and Maintenance" module in the online Cisco 1800 series software configuration documentation at the following URL:http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1800/sw/index.htm
Verify the Front Panel LED Indications
The indicator LEDs described in Table 3 provide power, activity, and status information.
Verify the Hardware Configuration
Verify the router hardware configuration by entering the following commands:
•show version—Displays the system hardware version; the installed software version; the names and sources of configuration files; the boot images; and the amount of installed DRAM, NVRAM, and flash memory.
•show diag—Lists and displays diagnostic information about the installed controllers, interface processors, and port adapters. Typical examples are network modules, interface cards (WICs, VWICs, HWICs) and advanced integration modules (AIMs).
7 Interface Numbering
Each individual interface (port) on a Cisco 1841 router is identified by a number. A Cisco 1841 router contains the following wide-area network (WAN) and local-area network (LAN) interface types:
•Two onboard Fast Ethernet LAN interfaces
•Two slots in which you can install WICs, VWICs (data only), and HWICs
The numbering format for the slots is interface-type 0/slot-number/port-number. Table 4 summarizes the interface numbering.
Table 4 Interface Numbering
Slot Number Slot Type Slot Numbering Range Example 1Onboard Ports
Fast Ethernet
0/0 and 0/1
interface fastethernet 0/0
Slot 0
HWIC/WIC/VWIC2
0/0/0 to 0/0/3
interface serial 0/0/0
line async 0/0/0
Slot 1
HWIC/WIC/VWIC2
0/1/0 to 0/1/3
interface serial 0/1/0
line async 0/1/0
1 The interfaces listed are examples only; other possible interface types are not listed.
2 VWICs are data-only in Cisco 1841 routers.
Note On the Cisco 1841 router, the numbering format for configuring an async interface is 0/slot/port. To configure the line associated with an async interface, simply use the interface number to specify the async line. For example, line 0/0/0 specifies the line associated with interface serial 0/0/0 on a WIC-2A/S in slot 0. Similarly, line 0/1/1 specifies the line associated with interface async 0/1/1 on a WIC-2AM in slot 1.
8 Perform Initial Configuration
You can configure your router by using one of the following tools:
•Cisco Router and Security Device Manager (SDM)—See the "Initial Configuration Using Cisco Router and Security Device Manager" section.
•Setup command facility—See the "Initial Configuration Using Setup Command Facility" section.
•Command-line interface (CLI)—See the "Initial Configuration Using Cisco CLI—Manual Configuration" section.
Initial Configuration Using Cisco Router and Security Device Manager
If the following messages appear at the end of the startup sequence, Cisco Router and Security Device Manager (SDM) is installed on your router:
yourname con0 is now availablePress RETURN to get started.For instructions on configuring your router by using SDM, refer to the Cisco Router and Security Device Manager (SDM) Quick Start Guide that shipped with your router.
Tip If the messages above do not appear, SDM and the Cisco Router and Security Device Manager (SDM) Quick Start Guide were not shipped with your router. If you want to use SDM, you can download the latest version of SDM and instructions for installing it on your router from the following location:
http://www.cisco.com/pcgi-bin/tablebuild.pl/sdm
To obtain the SDM quick start guide, SDM release notes, and other SDM documentation, go to www.cisco.com/go/sdm and click the Technical Documentation link.
Initial Configuration Using Setup Command Facility
This section shows how to use the setup command facility to configure a hostname for the router, set passwords, and configure an interface for communication with the management network.
If the following messages appear at the end of the startup sequence, the setup command facility has been invoked automatically:
--- System Configuration Dialog ---At any point you may enter a question mark '?' for help.Use ctrl-c to abort configuration dialog at any prompt.Default settings are in square brackets '[]'.Would you like to enter the initial configuration dialog? [yes/no]:The setup command facility prompts you for basic information about your router and network, and it creates an initial configuration file. After the configuration file is created, you can use the CLI or Cisco Router and Security Device Manager to perform additional configuration.
The prompts in the setup command facility vary, depending on your router model, the installed interface modules, and the software image. The following example and the user entries (in bold) are shown as examples only.
For help with interface and port numbering, see the "Interface Numbering" section.
Note If you make a mistake while using the setup command facility, you can exit and run the setup command facility again. Press Ctrl-C, and enter the setup command at the privileged EXEC mode prompt (
Router#
).
Step 1 To proceed using the setup command facility, enter yes:
Would you like to enter the initial configuration dialog? [yes/no]: yesStep 2 When the following messages appear, enter yes to enter basic management setup:
At any point you may enter a question mark '?' for help.Use ctrl-c to abort configuration dialog at any prompt.Default settings are in square brackets '[]'.Basic management setup configures only enough connectivityfor management of the system, extended setup will ask youto configure each interface on the systemWould you like to enter basic management setup? [yes/no]: yesStep 3 Enter a hostname for the router (this example uses Router):
Configuring global parameters:Enter host name [Router]: RouterStep 4 Enter an enable secret password. This password is encrypted (more secure) and cannot be seen when viewing the configuration:
The enable secret is a password used to protect access toprivileged EXEC and configuration modes. This password, afterentered, becomes encrypted in the configuration.Enter enable secret: xxxxxxStep 5 Enter an enable password that is different from the enable secret password. This password is not encrypted (less secure) and can be seen when viewing the configuration:
The enable password is used when you do not specify anenable secret password, with some older software versions, andsome boot images.Enter enable password: xxxxxxStep 6 Enter the virtual terminal password, which prevents unauthenticated access to the router through ports other than the console port:
The virtual terminal password is used to protectaccess to the router over a network interface.Enter virtual terminal password: xxxxxxStep 7 Respond to the following prompts as appropriate for your network:
Configure SNMP Network Management? [yes]:Community string [public]:A summary of the available interfaces is displayed.
Note The interface numbering that appears depends on the type of Cisco modular router platform and on the installed interface modules and cards.
Current interface summaryController Timeslots D-Channel Configurable modes StatusT1 0/0/0 24 23 pri/channelized Administratively upT1 0/0/1 24 23 pri/channelized Administratively upT1 0/1/0 24 23 pri/channelized Administratively upT1 0/1/1 24 23 pri/channelized Administratively upAny interface listed with OK? value "NO" does not have a valid configurationInterface IP-Address OK? Method Status ProlFastEthernet0/0 unassigned NO unset up upFastEthernet0/1 unassigned NO unset up dowStep 8 Select one of the available interfaces for connecting the router to the management network:
Enter interface name used to connect to themanagement network from the above interface summary: fastethernet0/0Step 9 Respond to the following prompts as appropriate for your network:
Configuring interface FastEthernet0/0:Use the 100 Base-TX (RJ-45) connector? [yes]: yesOperate in full-duplex mode? [no]: noConfigure IP on this interface? [yes]: yesIP address for this interface: 172.1.2.3Subnet mask for this interface [255.255.0.0] : 255.255.0.0Class B network is 172.1.0.0, 26 subnet bits; mask is /16Step 10 The configuration is displayed:
The following configuration command script was created:hostname Routerenable secret 5 $1$D5P6$PYx41/lQIASK.HcSbfO5q1enable password xxxxxxline vty 0 4password xxxxxxsnmp-server community public!no ip routing!interface FastEthernet0/0speed 100half-duplexip address 172.1.2.3 255.255.0.0!interface FastEthernet0/1shutdownno ip addressendStep 11 Respond to the following prompts. Select [2] to save the initial configuration.
[0] Go to the IOS command prompt without saving this config.[1] Return back to the setup without saving this config.[2] Save this configuration to nvram and exit.Enter your selection [2]: 2Building configuration...Use the enabled mode 'configure' command to modify this configuration.Press RETURN to get started! RETURNThe user prompt is displayed.
Router>Step 12 Verify the initial configuration. See the "Verify the Initial Configuration" section for verification procedures.
Initial Configuration Using Cisco CLI—Manual Configuration
This section shows how to display a command-line interface (CLI) prompt for configuration using the CLI, and it directs you to documentation for the CLI configuration. You can use the CLI if the following messages appear at the end of the startup sequence:
--- System Configuration Dialog ---At any point you may enter a question mark '?' for help.Use ctrl-c to abort configuration dialog at any prompt.Default settings are in square brackets '[]'.Would you like to enter the initial configuration dialog? [yes/no]:If these messages do not appear, SDM and a default configuration file were installed on the router at the factory. To use SDM to configure the router, see the "Initial Configuration Using Cisco Router and Security Device Manager" section.
For help with interface and port numbering, see the "Interface Numbering" section.
Step 1 To proceed with manual configuration using the CLI, enter no when the power-up messages end:
Would you like to enter the initial configuration dialog? [yes/no]: noStep 2 Press Return to terminate autoinstall and continue with manual configuration:
Would you like to terminate autoinstall? [yes] ReturnSeveral messages appear, ending with a line similar to the following:
Copyright (c) 1986-2004 by Cisco Systems, Inc.Compiled <date> <time> by <person>Step 3 Press Return to display the
Router>
prompt:...flashfs[4]: Initialization complete.Router>Step 4 Enter privileged EXEC mode:
Router> enableRouter#Step 5 For configuration procedures, refer to the applicable configuration instructions in the Cisco 2800 series software configuration documents. See the "Where to Go Next" section for information about accessing these documents.
Note To avoid losing work you have completed, be sure to save your configuration occasionally as you proceed. Use the copy running-config startup-config command to save the configuration to NVRAM.
Step 6 When you have finished the initial configuration, verify the initial configuration. See the "Verify the Initial Configuration" section for verification procedures.
Verify the Initial Configuration
To verify that the new interfaces are operating correctly, perform the following tests:
•To verify that the interfaces are operating correctly and that the interfaces and line protocol are in the correct state—up or down—enter the show interfaces command.
•To display a summary status of the interfaces configured for IP, enter the show ip interface brief command.
•To verify that you configured the correct host name and password, enter the show configuration command.
When you complete and verify the initial configuration, your Cisco router is ready to configure for specific functions. See the "Where to Go Next" section for information about locating documentation for advanced configuration procedures.
9 Where to Go Next
For additional configuration procedures, refer to the appropriate Cisco 1800 series routers documentation or Cisco IOS software documentation, available online on Cisco.com.
Tip See the "Obtaining Documentation" section for help in locating these documents.
To access documentation on Cisco.com
For Cisco 1841 router platform documentation, begin at Cisco.com at http://www.cisco.com, and select Products & Solutions > Routers > 1800 Series Integrated Services Routers> Technical Documentation > Document type > Document.
For Cisco IOS software documentation, start on Cisco.com at http://www.cisco.com, and select Products & Solutions > IOS Software > Cisco IOS Software Releases > Your Cisco IOS software release.
To get updated information about platform support for features, access Feature Navigator II at http://www.cisco.com/go/fn. (Requires a registered account on Cisco.com.)
To access documentation using Cisco Connection Online (CCO):
For Cisco 1800 series routers platform documentation, start on Cisco.com at http://www.cisco.com, and click the Technical Documentation tab under Quick Links. Under the Product Documentation heading, navigate to Modular Access Routers and to the documentation for your router.
For Cisco IOS software documentation, start on Cisco.com at http://www.cisco.com, and click the Technical Documentation tab under Quick Links. Under the Product Documentation heading, navigate to the Cisco IOS software documentation for the Cisco IOS software release that is installed on your router.
10 Obtaining Documentation
Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems.
Cisco.com
You can access the most current Cisco documentation at this URL:
http://www.cisco.com/univercd/home/home.htm
You can access the Cisco website at this URL:
You can access international Cisco websites at this URL:
http://www.cisco.com/public/countries_languages.shtml
Ordering Documentation
You can find instructions for ordering documentation at this URL:
http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm
You can order Cisco documentation in these ways:
•Registered Cisco.com users (Cisco direct customers) can order Cisco product documentation from the Ordering tool:
http://www.cisco.com/en/US/partner/ordering/index.shtml
•Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco Systems Corporate Headquarters (California, USA) at 408 526-7208 or, elsewhere in North America, by calling 800 553-NETS (6387).
11 Documentation Feedback
You can send comments about technical documentation to bug-doc@cisco.com.
You can submit comments by using the response card (if present) behind the front cover of your document or by writing to the following address:
Cisco Systems
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883We appreciate your comments.
12 Obtaining Technical Assistance
For all customers, partners, resellers, and distributors who hold valid Cisco service contracts, Cisco Technical Support provides 24-hour-a-day, award-winning technical assistance. The Cisco Technical Support Website on Cisco.com features extensive online support resources. In addition, Cisco Technical Assistance Center (TAC) engineers provide telephone support. If you do not hold a valid Cisco service contract, contact your reseller.
Cisco Technical Support Website
The Cisco Technical Support Website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The website is available 24 hours a day, 365 days a year at this URL:
http://www.cisco.com/techsupport
Access to all tools on the Cisco Technical Support Website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a user ID or password, you can register at this URL:
http://tools.cisco.com/RPF/register/register.do
Submitting a Service Request
Using the online TAC Service Request Tool is the fastest way to open S3 and S4 service requests. (S3 and S4 service requests are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Service Request Tool automatically provides recommended solutions. If your issue is not resolved using the recommended resources, your service request will be assigned to a Cisco TAC engineer. The TAC Service Request Tool is located at this URL:
http://www.cisco.com/techsupport/servicerequest
For S1 or S2 service requests or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco TAC engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly.
To open a service request by telephone, use one of the following numbers:
Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 227)
EMEA: +32 2 704 55 55
USA: 1 800 553 2447For a complete list of Cisco TAC contacts, go to this URL:
http://www.cisco.com/techsupport/contacts
Definitions of Service Request Severity
To ensure that all service requests are reported in a standard format, Cisco has established severity definitions.
Severity 1 (S1)—Your network is "down," or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.
Severity 2 (S2)—Operation of an existing network is severely degraded, or significant aspects of your business operation are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation.
Severity 3 (S3)—Operational performance of your network is impaired, but most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels.
Severity 4 (S4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations.
13 Obtaining Additional Publications and Information
Information about Cisco products, technologies, and network solutions is available from various online and printed sources.
•Cisco Marketplace provides a variety of Cisco books, reference guides, and logo merchandise. Visit Cisco Marketplace, the company store, at this URL:
http://www.cisco.com/go/marketplace/
•The Cisco Product Catalog describes the networking products offered by Cisco Systems, as well as ordering and customer support services. Access the Cisco Product Catalog at this URL:
http://cisco.com/univercd/cc/td/doc/pcat/
•Cisco Press publishes a wide range of general networking, training and certification titles. Both new and experienced users will benefit from these publications. For current Cisco Press titles and other information, go to Cisco Press at this URL:
•Packet magazine is the Cisco Systems technical user magazine for maximizing Internet and networking investments. Each quarter, Packet delivers coverage of the latest industry trends, technology breakthroughs, and Cisco products and solutions, as well as network deployment and troubleshooting tips, configuration examples, customer case studies, certification and training information, and links to scores of in-depth online resources. You can access Packet magazine at this URL:
•iQ Magazine is the quarterly publication from Cisco Systems designed to help growing companies learn how they can use technology to increase revenue, streamline their business, and expand services. The publication identifies the challenges facing these companies and the technologies to help solve them, using real-world case studies and business strategies to help readers make sound technology investment decisions. You can access iQ Magazine at this URL:
http://www.cisco.com/go/iqmagazine
•Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL:
•World-class networking training is available from Cisco. You can view current offerings at this URL:
http://www.cisco.com/en/US/learning/index.html