Cisco 1805 DOCSIS Cable Router Hardware Installation Guide
Product Overview
Downloads: This chapterpdf (PDF - 734.0KB) | Feedback

Product Overview

Table Of Contents

Product Overview


Product Overview


This overview describes the objectives, audience, organization, and conventions of the hardware document for the Cisco 1805 Data-over-Cable Service Interface Specifications (DOCSIS) cable router, and describes related documents that have additional information. It contains the following sections:

Objectives

Audience

Organization

Conventions

Safety Warnings

Related Documentation

Cisco One-Year Limited Hardware Warranty Terms

Obtaining Documentation, Obtaining Support, and Security Guidelines

Objectives

This documentation explains how to install, maintain, and troubleshoot your Cisco 1805 DOCSIS cable router.

For detailed software configuration information, see the Cisco 1800 series software configuration documentation and the Cisco IOS configuration guide and command reference publications that are available online. See the "Obtaining Documentation, Obtaining Support, and Security Guidelines" section for more information.

To access the warranty, service, and support information, see the "Cisco One-Year Limited Hardware Warranty Terms" section.

Audience

This document is designed for the person installing, configuring, and maintaining the router, who should be familiar with electronic circuitry and wiring practices and has experience as an electronic or electromechanical technician. The document identifies procedures that should be performed only by trained and qualified personnel.

Organization

Table 1 lists the topics covered in this document.

Table 1 Document Organization 

Title
Description

Product Description

Describes the features and specifications of the Cisco 1805 DOCSIS cable router.

Preinstallation Requirements and Planning for Cisco 1805 DOCSIS Cable Routers

Describes safety recommendations, site requirements, required tools and equipment, and includes an installation checklist.

Chassis Installation Procedures for the Cisco 1805 DOCSIS Cable Router

Describes how to install your Cisco 1805 cable router on a desktop.

Cable Information and Specifications for Cisco 1805 DOCSIS Cable Routers

Provides information about cables needed to install your Cisco 1805 cable router.

Cable Connection Procedures for Cisco 1805 DOCSIS Cable Router

Describes how to connect your Cisco 1805 router to a power source and to networks and external devices.

Power-Up Procedures for Cisco 1805 DOCSIS Cable Routers

Describes how to power up your Cisco 1805 cable router and perform an initial configuration to provide network access.

Troubleshooting the Cisco 1805 DOCSIS Cable Router

Describes how to isolate problems, read LEDs, and interpret messages.

Installing and Upgrading Internal Modules in Cisco 1805 Cable Routers

Describes how to install or upgrade modules that are located within the router, such as memory modules and AIMs.

Installing and Replacing CompactFlash Memory Cards on Cisco 1805 DOCSIS Cable Router

Describes hardware installation procedures for the external CompactFlash memory card.


Conventions

This document uses the conventions listed in Table 2 to convey instructions and information.

Table 2 Document Conventions 

Convention
Description

boldface font

Commands and keywords.

italic font

Variables for which you supply values.

[      ]

Optional keywords or arguments appear in square brackets.

{x | y | z}

A choice of required keywords appears in braces separated by vertical bars. You must select one.

screen font

Examples of information displayed on the screen.

boldface screen font

Examples of information you must enter.

<    >

Nonprinting characters, for example passwords, appear in angle brackets in contexts where italics are not available.

[    ]

Default responses to system prompts appear in square brackets.



Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual.



Timesaver Means the described action saves time. You can save time by performing the action described in the paragraph.



Tip Means the following information will help you solve a problem. The tips information might not be troubleshooting or even an action, but could be useful information, similar to a Timesaver.



Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

Safety Warnings

Safety warnings appear throughout this publication in procedures that, if performed incorrectly, may harm you. A warning symbol precedes each warning statement. To see translations of the warnings that appear in this publication, see the Regulatory Compliance and Safety Information for Cisco 1840 Routers document that accompanies your router.

Warning


IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071

SAVE THESE INSTRUCTIONS

Waarschuwing

BELANGRIJKE VEILIGHEIDSINSTRUCTIES

Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen.

BEWAAR DEZE INSTRUCTIES

Varoitus

TÄRKEITÄ TURVALLISUUSOHJEITA

Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla.

SÄILYTÄ NÄMÄ OHJEET

Attention

IMPORTANTES INFORMATIONS DE SÉCURITÉ

Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement.

CONSERVEZ CES INFORMATIONS

Warnung

WICHTIGE SICHERHEITSHINWEISE

Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.

BEWAHREN SIE DIESE HINWEISE GUT AUF.

Avvertenza

IMPORTANTI ISTRUZIONI SULLA SICUREZZA

Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento.

CONSERVARE QUESTE ISTRUZIONI

Advarsel

VIKTIGE SIKKERHETSINSTRUKSJONER

Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten.

TA VARE PÅ DISSE INSTRUKSJONENE

Aviso

INSTRUÇÕES IMPORTANTES DE SEGURANÇA

Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo.

GUARDE ESTAS INSTRUÇÕES

¡Advertencia!

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo.

GUARDE ESTAS INSTRUCCIONES

Varning!

VIKTIGA SÄKERHETSANVISNINGAR

Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning.

SPARA DESSA ANVISNINGAR


Related Documentation

The Cisco IOS software that runs your Cisco 1805 DOCSIS cable router includes extensive features and functionality. For information that is beyond the scope of this document, or for additional information, use the following resources.


Timesaver Make sure that you have access to the documents listed in Table 3 that are available online.


Table 3 Related and Referenced Documents 

Cisco Product
Document Title

Cisco 1805 cable routers

Cisco 1805 DOCSIS Cable Routers Quick Start Guide

Cisco 1800 Series Software Configuration

Regulatory Compliance and Safety Information for Cisco 1840 Routers

Cisco IOS software

Cisco IOS software documentation, all releases.

See the documentation for the Cisco IOS software release installed on your router.


Cisco One-Year Limited Hardware Warranty Terms

There are special terms applicable to your hardware warranty and various services that you can use during the warranty period. Your formal Warranty Statement, including the warranties and license agreements applicable to Cisco software, is available on Cisco.com. Follow these steps to access and download the Cisco Information Packet and your warranty and license agreements from Cisco.com.

1. Launch your browser, and go to this URL:

http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm

The Warranties and License Agreements page appears.

2. To read the Cisco Information Packet, follow these steps:

a. Click the Information Packet Number field, and make sure that the part number 78-5235-03A0 is highlighted.

b. Select the language in which you would like to read the document.

c. Click Go.

The Cisco Limited Warranty and Software License page from the Information Packet appears.

d. Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF).


Note You must have Adobe Acrobat Reader to view and print PDF files. You can download the reader from Adobe's website: http://www.adobe.com


3. To read translated and localized warranty information about your product, follow these steps:

a. Enter this part number in the Warranty Document Number field:

78-10747-01C0

b. Select the language in which you would like to view the document.

c. Click Go.

The Cisco warranty page appears.

d. Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF).

You can also contact the Cisco service and support website for assistance:

http://www.cisco.com/public/Support_root.shtml.

Duration of Hardware Warranty

One (1) Year

Replacement, Repair, or Refund Policy for Hardware

Cisco or its service center will use commercially reasonable efforts to ship a replacement part within ten (10) working days after receipt of a Return Materials Authorization (RMA) request. Actual delivery times can vary, depending on the customer location.

Cisco reserves the right to refund the purchase price as its exclusive warranty remedy.

To Receive a Return Materials Authorization (RMA) Number

Contact the company from whom you purchased the product. If you purchased the product directly from Cisco, contact your Cisco Sales and Service Representative.

Complete the information below, and keep it for reference.

Company product purchased from

 

Company telephone number

 

Product model number

 

Product serial number

 

Maintenance contract number

 

Obtaining Documentation, Obtaining Support, and Security Guidelines

For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html