Preface
This preface discusses the objectives, audience, and organization of this publication. The following sections are in this preface:
•Document Revision History
•Document Objectives
•Audience
•Document Organization
•Safety Warnings and Cautions
•Related Documentation
•Obtaining Documentation, Obtaining Support, and Security Guidelines
Document Revision History
The Document Revision History table below records technical changes to this document.
|
|
|
OL-11364-04 |
November, 2008 |
Revised rack-mount bracket installation instructions. |
OL-11364-03 |
August, 2008 |
Added information about SFP-GE-F module. |
OL-11364-02 |
June, 2007 |
Added additional software support information. |
OL-11364-01 |
April, 2007 |
This is the first version of this document. |
Document Objectives
This publication describes the installation and configuration of the Cisco 7201 router, replacement or upgrading of field replaceable units (FRUs), and troubleshooting of the Cisco 7201 hardware. The purpose of this guide is to enable the safe and efficient installation of the Cisco 7201 router.
Audience
This publication is primarily designed for the person responsible for installing, maintaining, and troubleshooting the Cisco 7201 router. The users of this guide should be familiar with electronic circuitry and wiring practices and have experience as electronic or electromechanical technicians. Users of this guide should also have experience in installing high-end networking equipment. Certain procedures described in this guide require a certified electrician.
For configuration applications, refer to the Cisco IOS configuration guides and command references and to the documents listed in the "Related Documentation" section.
Document Organization
The major sections of this installation and configuration guide are as follows:
Chapter and Appendix Number and Title
|
|
Chapter 1, "Overview" |
This chapter provides an overview of the Cisco 7201. |
Chapter 2, "Installing the Cisco 7201 Router" |
This chapter provides preparation and installation instructions for installing the chassis in a rack and for attaching cables. |
Chapter 3, "Starting and Configuring the Router" |
This chapter provides a functional overview of the system as well as startup and configuration instructions. |
Chapter 4, "Replacing Cisco 7201 Field-Replaceable Units" |
This chapter provides instructions for removing and replacing power supplies, SDRAM, CompactFlash disks, USB memory, SFP modules, and port adapters and service adapters. |
Chapter 5, "Troubleshooting Initial Startup Problems" |
This chapter provides basic system startup troubleshooting information. |
Appendix A, "Specifications" |
This appendix provides system specifications as well as port and cabling pinouts and specifications. |
Appendix B, "Using the CompactFlash Disk" |
This appendix provides instructions for using the CompactFlash Disk. |
Appendix C, "Configuration Register Information" |
This appendix provides configuration register information. |
Safety Warnings and Cautions
Most safety warnings for the Cisco 7201 router are placed in relevant sections throughout the document. For translated safety warnings, see the Regulatory Compliance and Safety Information for Cisco 7200 Series Routers. Below is Statement 1071, the Warning Definition statement, complete with translated warnings.
Translated warning statement numbers are listed at the end of each warning. They correspond to the translated safety warning statement numbers found in translated warning statement headings in the Regulatory Compliance and Safety Information for Cisco 7200 Series Routers document.
Warning Definition
Warning |
IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS |
Waarschuwing |
BELANGRIJKE VEILIGHEIDSINSTRUCTIES Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen. BEWAAR DEZE INSTRUCTIES |
Varoitus |
TÄRKEITÄ TURVALLISUUSOHJEITA Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla. SÄILYTÄ NÄMÄ OHJEET |
Attention |
IMPORTANTES INFORMATIONS DE SÉCURITÉ Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement. CONSERVEZ CES INFORMATIONS |
Warnung |
WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden. BEWAHREN SIE DIESE HINWEISE GUT AUF. |
Avvertenza |
IMPORTANTI ISTRUZIONI SULLA SICUREZZA Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento. CONSERVARE QUESTE ISTRUZIONI |
Advarsel |
VIKTIGE SIKKERHETSINSTRUKSJONER Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten. TA VARE PÅ DISSE INSTRUKSJONENE |
Aviso |
INSTRUÇÕES IMPORTANTES DE SEGURANÇA Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo. GUARDE ESTAS INSTRUÇÕES |
¡Advertencia! |
INSTRUCCIONES IMPORTANTES DE SEGURIDAD Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo. GUARDE ESTAS INSTRUCCIONES |
Varning! |
VIKTIGA SÄKERHETSANVISNINGAR Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR |
|
|
|
|
|
|
|
|
|
|
Aviso |
INSTRUÇÕES IMPORTANTES DE SEGURANÇA Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham o dispositivo. GUARDE ESTAS INSTRUÇÕES |
Advarsel |
VIGTIGE SIKKERHEDSANVISNINGER Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for legemesbeskadigelse. Før du begynder arbejde på udstyr, skal du være opmærksom på de involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardprocedurer til undgåelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed. GEM DISSE ANVISNINGER |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030
Warning Ultimate disposal of this product should be handled according to all national laws and regulations. To see translations of the warnings that appear in this publication, refer to the Regulatory Compliance and Safety Information document that accompanied the equipment. Statement 1040
Lithium Battery Caution
Caution
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturers instructions.
|
Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage tilleverandøren. |
|
Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan valmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mikaisesti. |
|
Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende type anbefait av apparatfabrikanten. Brukte batterier kasseres i henhold til fabrikantens instruksjoner. |
|
Eksplosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion. |
Related Documentation
Your Cisco 7201 router and the Cisco IOS software running on it contain extensive features and functionality, which are documented in the following resources:
•All documentation related to the Cisco 7201 router is listed in the online Cisco 7201 Router Documentation Roadmap at
http://www.cisco.com/en/US/docs/routers/7200/roadmaps/7201_doc_roadmap/11365r.html
Information in this master index includes troubleshooting tools and documentation, regulatory compliance and safety information, and installation and replacement information.
Some of the Cisco 7201 documentation that is listed in the Cisco 7201 Router Documentation Roadmap includes:
–The Cisco 7201 Router Quick Start Guide contains installation and configuration information and is online. It contains quick reference information about chassis or parts installation.
–The Regulatory Compliance and Safety Information for Cisco 7200 Series Routers document provides international agency compliance, safety, and statutory information for wide-area network (WAN) interfaces for the Cisco 7201 router.
–The Cisco 7201 Port Adapter Documentation Roadmap contains listings and links to port adapter and service adapter documentation. See the documentation guide that ships with the port adapter or service adapter for the customer order number.
–The Cisco 7201 Troubleshooting Documentation Roadmap document contains a link to the Cisco 7201 Troubleshooting Module, and other troubleshooting documentation to help you troubleshoot problems with the Cisco 7201 router.
•Cisco IOS software documentation contains Cisco IOS software configuration information and support. See the modular configuration and modular command reference publications in the set that corresponds to the software release installed on your Cisco hardware.
•To check the minimum software requirements of Cisco IOS software with the hardware installed on your router, Cisco maintains the Software Advisor tool on Cisco.com. This tool does not verify whether modules within a system are compatible, but it does provide the minimum Cisco IOS requirements for individual hardware modules or components.
To access Software Advisor, go to Cisco.com. From the top of the page, choose Support. From the support drop-down menu, choose Tools & Resources, and then click the Software Advisor link.
Note Access to this tool is limited to users with Cisco.com login accounts.
•Cisco Documentation DVD (See the "Obtaining Documentation, Obtaining Support, and Security Guidelines" section.)
Obtaining Documentation, Obtaining Support, and Security Guidelines
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised technical documentation at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html.