Table Of Contents
Installing the CTX2500 Filler Card in the
Cisco ONS 15310-MA
Product Names: 15310-CTX-FILLER
This document provides a card description, specifications, and procedure for installing the CTX2500 filler card in the ONS 15310-MA shelf assembly. As appropriate, use this document in conjunction with the Cisco ONS 15310-CL and Cisco ONS 15310-MA Procedure Guide, the Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, and the Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide when working with filler cards.
This document contains the following sections:
CTX Filler Card Description
Caution Do not operate the ONS 15310-MA shelf assembly unless a card is plugged into each card slot.
The CTX FILLER card is a printed circuit board (PCB) with a blank faceplate and two connectors that, when the card is installed, plug into receptacles at the back of the slot. CTC, the ONS 15310-MA GUI, detects when a CTX FILLER card is plugged in and displays it in node view.
Figure 1 shows the CTX FILLER card faceplate for the ONS 15310-MA. The CTX FILLER card is installed in empty CTX2500 slots (Slots 3 or 4).
Figure 1 CTX Filler Card
Caution Do not attempt to install the CTX FILLER card in a traffic card slot (Slots 1, 2, 5, and 6 in the ONS 15310-MA, and the expansion card slot in the ONS 15310-CL). Only 15310-EXP-FILLER cards should be installed in the traffic card slots.
CTX Filler Card Specifications
I-Temp: -40 to +65 degrees Celsius (-40 to 149 degrees Fahrenheit)
–Operating humidity: 5 to 95%, noncondensing
–Height: 6.94 in. (167.28 mm)
–Width: 1.450 in. (36.83 mm)
–Depth:8.35 in. (212.09 mm)
–Weight not including clam shell: 0.51 lb (0.23 kg)
Install the CTX Filler Cards
Step 1 Open the card ejector at the top of the card.
Step 2 Slide the card along the guide rails into Slot 3 or 4.
Note Do not attempt to install the 15310-EXP-FILLER card in a CTX2500 card slot (Slots 3 and 4) on the 15310-MA shelf assembly. Only a 15310-CTX-FILLER card should be installed in the CTX2500 slot.
Step 3 Close the ejector by firmly pushing it downward.
Note The filler cards are hot-pluggable, so they can be inserted or removed without turning off the power to the ONS 15310-MA.
Step 4 When you log into CTC, verify that the card appears properly in CTC node view.
Stop. You have completed this procedure.
•Cisco ONS 15310-CL and Cisco ONS 15310-MA Procedure Guide
•Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual
•Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
Subscribe to the What's New in Cisco Product Documentation as an RSS feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service. Cisco currently supports RSS Version 2.0.
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2011 Cisco Systems, Inc. All rights reserved.