First Published: August 28, 2020

Network Convergence System 1001


Note

This software release has reached end-of-life status. For more information, see the End-of-Life and End-of-Sale Notices.

Note

Explore the Content Hub, the all new portal that offers an enhanced product documentation experience.

  • Use faceted search to locate content that is most relevant to you.

  • Create customized PDFs for ready reference.

  • Benefit from context-based recommendations.

Get started with the Content Hub at content.cisco.com to craft a personalized documentation experience.

Do provide feedback about your experience with the Content Hub.

The Cisco Network Convergence System (NCS) 1001 is a 1 RU chassis that addresses the growing bandwidth needs of data center DWDM applications. It provides a DWDM line system that is optimized for data center environments and is optimized for point-to-point applications at maximum capacity. Cisco NCS 1001 supports up to three optical modules. The modules can be amplifiers, OTDR, or protection switching modules.

NCS 1001 has the following components:

  • Four removable fans.

  • Two removable AC or DC power supply modules (PSU).

  • Three slots for optical modules. The Optical Amplifier Module ( NCS1K-EDFA), Protection Switching Module (NCS1K-PSM), and Optical Time Domain Reflectometer Module (NCS1K-OTDR) can be inserted in these slots.

For all the versions of the Release Notes for Cisco NCS 1001, see the Release Notes URL.

Release Packages for Cisco NCS 1001

Feature Set

Filename

Description

Composite Package

Cisco IOS XR Core Bundle + Manageability Package

ncs1001-iosxr-px-k9-7.1.2.tar

Contains required core packages, including OS, Admin, Base, Forwarding, SNMP Agent, FPD, and Alarm Correlation and Netconf-yang, Telemetry, Extensible Markup Language (XML) Parser, HTTP server packages.

Individually-Installable Optional Packages

Cisco IOS XR Security Package

ncs1001-k9sec-1.0.0.0-r712.x86_64.rpm

Support for Encryption, Decryption, IP Security (IPSec), Secure Shell (SSH), Secure Socket Layer (SSL), and Public-key infrastructure (PKI).

System Requirement

Memory Configuration

At least 16 GB RAM

Supported Hardware

For a complete list of supported optics, hardware and ordering information, see the data sheet.

See the Hardware Installation Guide for more information about installation.

Supported MIBs

The following MIBs are supported in NCS 1001.

  • CISCO-OPTICAL-OTS-MIB

  • CISCO-CONFIG-MAN-MIB

  • CISCO-FLASH-MIB

  • CISCO-ENTITY-REDUNDANCY-MIB

  • CISCO-SYSTEM-MIB

  • CISCO-ENTITY-ASSET-MIB

  • EVENT-MIB

  • DISMAN-EXPRESSION-MIB

  • CISCO-FTP-CLIENT-MIB

  • NOTIFICATION-LOG-MIB

  • CISCO-RF-MIB

  • CISCO-TCP-MIB

  • UDP-MIB

  • CISCO-OTN-IF-MIB

  • CISCO-ENHANCED-MEMPOOL-MIB

  • CISCO-PROCESS-MIB

  • CISCO-SYSLOG-MIB

  • ENTITY-MIB

  • CISCO-ENTITY-FRU-CONTROL-MIB

  • CISCO-IF-EXTENSION-MIB

  • RMON-MIB

  • CISCO-OPTICAL-MIB

  • CISCO-ENTITY-SENSOR-MIB

Determine Software Version

Log in to NCS 1001 and enter the show version command: 

RP/0/RP0/CPU0:ios#show version
Mon Jul 28 15:52:01.424 UTC
CiscoIOS XR Software, Version 7.1.2
Copyright(c) 2013-2020 by Cisco Systems, Inc.

Build Information:
Built By: deenayak
Built On: Mon Jul 28 01:19:52 PST 2020
Built Host: iox-lnx-071 
Workspace: /auto/srcarchive15/prod/7.1.2/ncs1001/ws
Version: 7.1.2
Location: /opt/cisco/XR/packages/
Label: 7.1.2
Cisco NCS-1001() processor

Determine Firmware Support

Log in to NCS 1001 and enter the show hw-module fpd command:

Use the show hw-module fpd command in EXEC mode to view the hardware components with their current FPD version and status. The status of the hardware must be CURRENT; Running and Programed version must be the same.

The following shows the output of show hw-module fpd command for NCS 1001 with EDFA (slot 1 and 3) and PSM (slot 2) of vendor 1. 

RP/0/RP0/CPU0:ios#show hw-module fpd
                                                                      FPD Versions
                                                                    =================
Location   Card type             HWver FPD device       ATR Status   Running Programd
-----------------------------------------------------------------------------------
0/0        NCS1001-K9            0.1   Control_BKP      B   CURRENT            1.10
0/0        NCS1001-K9            0.1   Control_FPGA         CURRENT    1.10    1.10
0/1        NCS1K-EDFA            0.0   FW_EDFAv1            CURRENT    1.56    1.56
0/2        NCS1K-PSM             0.0   FW_PSMv1             CURRENT    1.51    1.51
0/3        NCS1K-EDFA            0.0   FW_EDFAv1            CURRENT    1.56    1.56
0/RP0      NCS1K-CNTLR2          0.1   BIOS_Backup      BS  CURRENT   14.60   14.60
0/RP0      NCS1K-CNTLR2          0.1   BIOS_Primary      S  CURRENT   14.60   14.60
0/RP0      NCS1K-CNTLR2          0.1   Daisy_Duke_BKP   BS  CURRENT            0.20
0/RP0      NCS1K-CNTLR2          0.1   Daisy_Duke_FPGA   S  CURRENT    0.20    0.20

The following shows the output of show hw-module fpd command for NCS 1001 with EDFA (slot 1 and 3) and PSM (slot 2) of vendor 2. 

RP/0/RP0/CPU0:150#show hw-module fpd
Thu Jul 16 15:28:31.146 CEST
                                                                       FPD Versions
                                                                    =================
Location   Card type             HWver FPD device       ATR Status   Running Programd
-----------------------------------------------------------------------------------
0/0        NCS1001-K9            0.1   Control_BKP      B   CURRENT            1.10
0/0        NCS1001-K9            0.1   Control_FPGA         CURRENT    1.10    1.10
0/1        NCS1K-EDFA            0.0   FW_EDFAv2           CURRENT     0.40    0.40
0/2        NCS1K-PSM             0.0   FW_PSMv2             CURRENT    0.16    0.16
0/3        NCS1K-EDFA            0.0   FW_EDFAv2            CURRENT    0.40    0.40
0/RP0      NCS1K-CNTLR2          0.1   BIOS_Backup      BS  CURRENT   14.60   14.60
0/RP0      NCS1K-CNTLR2          0.1   BIOS_Primary      S  CURRENT   14.60   14.60
0/RP0      NCS1K-CNTLR2          0.1   Daisy_Duke_BKP   BS  CURRENT            0.20
0/RP0      NCS1K-CNTLR2          0.1   Daisy_Duke_FPGA   S  CURRENT    0.20    0.20

The following shows the output of show hw-module fpd command with OTDR card in slot 1. 

RP/0/RP0/CPU0:150#show hw-module fpd
Thu Jul 16 15:28:31.146 CEST
......
0/1        NCS1K-OTDR            0.0   FW_OTDR_p            CURRENT    6.02    6.02
0/1        NCS1K-OTDR            0.0   FW_OTDR_s            CURRENT    1.51    1.51
.....