Network Convergence System 1001
 Note |
This software release has reached end-of-life status. For more information, see the End-of-Life and End-of-Sale Notices. |
Note |
Explore the Content Hub, the all new portal that offers an enhanced product documentation experience.
Get started with the Content Hub at content.cisco.com to craft a personalized documentation experience. Do provide feedback about your experience with the Content Hub. |
The Cisco Network Convergence System (NCS) 1001 is a 1 RU chassis that addresses the growing bandwidth needs of data center DWDM applications. It provides a DWDM line system that is optimized for data center environments and is optimized for point-to-point applications at maximum capacity. Cisco NCS 1001 supports up to three optical modules. The modules can be amplifiers, OTDR, or protection switching modules.
NCS 1001 has the following components:
-
Four removable fans.
-
Two removable AC or DC power supply modules (PSU).
-
Three slots for optical modules. The Optical Amplifier Module ( NCS1K-EDFA), Protection Switching Module (NCS1K-PSM), and Optical Time Domain Reflectometer Module (NCS1K-OTDR) can be inserted in these slots.
For all the versions of the Release Notes for Cisco NCS 1001, see the Release Notes URL.
Determine Software Version
Log in to NCS 1001 and enter the show version command:
RP/0/RP0/CPU0:ios#show version
Fri Feb 1 10:39:59.807 IST
Cisco IOS XR Software, Version 6.5.2
Copyright (c) 2013-2019 by Cisco Systems, Inc.
Build Information:
Built By : ahoang
Built On : Wed Jan 30 17:47:26 PST 2019
Built Host : iox-ucs-023
Workspace : /auto/srcarchive13/prod/6.5.2/ncs1001/ws
Version : 6.5.2
Location : /opt/cisco/XR/packages/
cisco NCS-1001 () processor
System uptime is 1 hour 17 minutes
Determine Firmware Support
Log in to NCS 1001 and enter the show hw-module fpd command:
Use the show hw-module fpd command in EXEC mode to view the hardware components with their current FPD version and status. The status of the hardware must be CURRENT; Running and Programed version must be the same.
RP/0/RP0/CPU0:ios#show hw-module fpd
Fri Feb 1 10:40:03.357 IST
FPD Versions
=================
Location Card type HWver FPD device ATR Status Running Programd
------------------------------------------------------------------------------
0/0 NCS1001-K9 0.1 Control_BKP B CURRENT 1.10
0/0 NCS1001-K9 0.1 Control_FPGA CURRENT 1.10 1.10
0/1 NCS1K-EDFA 0.0 FW_EDFAv1 CURRENT 1.51 1.51
0/2 NCS1K-PSM 0.0 FW_PSMv1 CURRENT 1.44 1.44
0/3 NCS1K-EDFA 0.0 FW_EDFAv1 CURRENT 1.51 1.51
0/RP0 NCS1K-CNTLR2 0.1 BIOS_Backup BS CURRENT 14.20
0/RP0 NCS1K-CNTLR2 0.1 BIOS_Primary S CURRENT 14.20 14.20
0/RP0 NCS1K-CNTLR2 0.1 Daisy_Duke_BKP BS CURRENT 0.17
0/RP0 NCS1K-CNTLR2 0.1 Daisy_Duke_FPGA S CURRENT 0.17 0.17
The following shows the output of show hw-module fpd command including OTDR card
RP/0/RP0/CPU0:ios#show hw-module fpd
Mon Jan 28 10:28:40.024 CET
FPD Versions
=================
Location Card type HWver FPD device ATR Status Running Programd
------------------------------------------------------------------------------
0/0 NCS1001-K9 0.1 Control_BKP B CURRENT 1.10
0/0 NCS1001-K9 0.1 Control_FPGA CURRENT 1.10 1.10
0/1 NCS1K-EDFA 0.0 FW_EDFAv1 CURRENT 1.53 1.53
0/2 NCS1K-OTDR 0.0 FW_OTDR_p CURRENT 5.02 5.02
0/2 NCS1K-OTDR 0.0 FW_OTDR_s CURRENT 1.51 1.51
0/3 NCS1K-EDFA 0.0 FW_EDFAv1 CURRENT 1.53 1.53
0/RP0 NCS1K-CNTLR2 0.1 BIOS_Backup BS CURRENT 14.20
0/RP0 NCS1K-CNTLR2 0.1 BIOS_Primary S CURRENT 14.20 14.20
0/RP0 NCS1K-CNTLR2 0.1 Daisy_Duke_BKP BS CURRENT 0.17
0/RP0 NCS1K-CNTLR2 0.1 Daisy_Duke_FPGA S CURRENT 0.17 0.17
Open Caveats for NCS 1001
|
Caveat ID Number |
Description |
|---|---|
|
Wrong description of sfp pluggable after invmgr_proxy restart |
|
|
"UPGD FAIL" error found during upgrade all fpd all command |
Feedback