Guest

Cisco Catalyst 8500 Series Multiservice Switch Routers

Release Notes for the Catalyst 8510 and LightStream 1010 Switch for Cisco IOS Release 12.1(26)EB2, Part 1: System Requirements

  • Viewing Options

  • PDF (354.0 KB)
  • Feedback
Release Notes for the Catalyst 8510 and the LightStream 1010 Switch for Cisco IOS Release 12.1(26)EB2, Part 1: System Requirements

Table Of Contents

Release Notes for the Catalyst 8510 and the LightStream 1010 Switch for Cisco IOS Release 12.1(26)EB2, Part 1: System Requirements

Contents

Introduction

System Requirements

Memory Requirements for Catalyst 8510 MSR and LightStream 1010

Memory Requirements for Catalyst 8510 CSR

Hardware Supported

Determining Your Software Release

Other Firmware Code

Feature Set Tables

Release Names, Versions, and Part Numbers

New and Changed Information

New Features in Release 12.1(26)EB2

Catalyst 8510 MSR

New Features in Release 12.1(26)EB1

Catalyst 8510 MSR

New Features in Release 12.1(26)EB

Catalyst 8510 MSR

New Features in Release 12.1(23)EB

Catalyst 8510 MSR and LightStream 1010

Catalyst 8510 CSR

New Features in Release 12.1(22)EB

Catalyst 8510 MSR and LightStream 1010

Catalyst 8510 CSR

New Features in Release 12.1(22)E

Catalyst 8510 MSR and LightStream 1010

Catalyst 8510 CSR

New Features in Release 12.1(20)EB

Catalyst 8510 MSR and LightStream 1010

Catalyst 8510 CSR

New Features in Release 12.1(20)E

Catalyst 8510 MSR and LightStream 1010

Catalyst 8510 CSR

New Features in Release 12.1(19)EB

Catalyst 8510 MSR and LightStream 1010

Catalyst 8510 CSR

New Features in Release 12.1(19)E2

Catalyst 8510 MSR and LightStream 1010

Catalyst 8510 CSR

New Features in Release 12.1(14)EB1

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(19)E

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(14)EB

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(14)E1

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(13)EB1

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(13)E1

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(12c)EY

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(12c)E1

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(12c)E

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(11b)E1

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(11b)E

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(10)EY

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(10)E

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(7a)EY1

Catalyst 8510 MSR and LightStream 1010

New Features in Cisco IOS Release 12.1(7a)EY

Catalyst 8510 MSR and LightStream 1010

New Features in Cisco IOS Release 12.1(6)EY

Catalyst 8510 MSR and LightStream 1010

New Features in Cisco IOS Release 12.1(5)EY1

Catalyst 8510 MSR and LightStream 1010

Caveats

Restriction

Unicast Reverse Path Forwarding Not Supported

Interoperability

Y2K Compliance

Related Documentation

Obtaining Documentation

Cisco.com

Ordering Documentation

Documentation Feedback

Obtaining Technical Assistance

Cisco Technical Support Website

Submitting a Service Request

Definitions of Service Request Severity

Obtaining Additional Publications and Information


Release Notes for the Catalyst 8510 and the LightStream 1010 Switch for Cisco IOS Release 12.1(26)EB2, Part 1: System Requirements


August 02, 2007

Catalyst 8510 and LightStream 1010 Switch for Cisco IOS Release 12.1(26)EB2

Text Part Number: OL-14426-01

This document describes the features and caveats for Cisco IOS Release 12.1(26)EB2 software for the Catalyst 8510 and the LightStream 1010 switch.


Note All information pertains to both the Catalyst 8510 and LightStream 1010 switch platforms, unless differences between the platforms are noted in the text.


Contents

This document includes the following sections:

Introduction

System Requirements

New and Changed Information

Caveats

Restriction

Interoperability

Y2K Compliance

Related Documentation

Obtaining Documentation

Obtaining Technical Assistance

Obtaining Additional Publications and Information

Introduction

The Catalyst 8510 and LightStream 1010 switch provide switched ATM connections to individual workstations, servers, LAN segments, or other ATM switches and routers using fiber-optic, unshielded twisted-pair (UTP), and coaxial cable.


Note The ATM switch processors (hardware version 4.0 or higher) and all port adapters can be installed in the Catalyst 5500 switch chassis.


The Catalyst 8510 CSR belongs to a class of high-performance Layer 3 switch routers. It is optimized for the campus LAN or the intranet and provides both wirespeed Ethernet routing and switching services.

System Requirements

This section describes the system requirements for Cisco IOS Release 12.0 and includes the following sections:

Memory Requirements for Catalyst 8510 MSR and LightStream 1010

Memory Requirements for Catalyst 8510 CSR

Hardware Supported

Determining Your Software Release

Other Firmware Code

Feature Set Tables

Release Names, Versions, and Part Numbers

Memory Requirements for Catalyst 8510 MSR and LightStream 1010

The DRAM memory configuration is 64-MB DRAM (MEM-ASP64M), which is the default for both the Catalyst 8510 and the LightStream 1010 switch platforms.

Memory Requirements for Catalyst 8510 CSR

Table 1 lists the default Flash and DRAM memory for the Catalyst 8510 CSR, as well as memory upgrade options.

Table 1 Catalyst 8510 CSR Default Memory and Upgrade Options 

Memory Type
Catalyst 8510 CSR Defaults
Upgrade Options

Flash memory

16 MB

MEM-ASP-FLC16M=
MEM-ASP-FLC20M=

DRAM

64 MB

None


To download and store a copy of the Catalyst 8510 CSR software image, we recommend using a minimum 20 MB Flash PC Card, which allows you to have two or more images installed at the same time.

The Catalyst 8510 CSR boots from its onboard Flash memory by default. To change this default to boot from a Flash PC Card instead, you must change the configuration register setting to 0x2102. Refer to the Layer 3 Switching Software Feature and Configuration Guide for more information.

Hardware Supported

Table 2 lists the interfaces supported by both the Catalyst 8510 MSR and LightStream 1010 switch and Cisco IOS Release 12.1(26)EB2 and their minimum software release requirements. All platform specific requirements are noted in the table. Table 2 lists this information for the Catalyst 8510 CSR.


Note Although minimum software versions are listed, we strongly recommend that you use the latest available software release for all Catalyst 8510 and LightStream 1010 hardware.


Table 2 Catalyst 8510 MSR and LightStream 1010 Interface Modules and
Minimum Software Required  

Part Number
Description
Minimum Software Version Required

WAI-OC3-4MM

4-port STS-3c/STM-1 multimode fiber port adapters

WAS1-1

WAI-OC3-4SS

4-port STS-3c/STM-1 single-mode fiber port adapters

WAS1-1

WAI-OC3-4U5

4-port STS-3c/STM-1 UTP-5 port adapters

WAS1-1

WAI-OC3-4SSLR

4-port STS-3c/STM-1 SMF long reach port adapters

WAS3-2

WAI-OC3-1S3M

OC-3 mix port adapter module, 1 IR+ port and 3 MM ports

WAS3-1

WAI-OC12-1MM

1-port STS-12c/STM-4c multimode fiber port adapters

WAS1-2

WAI-OC12-1SS

1-port STS-12c/STM-4c SMF port adapters

WAS1-1

WAI-OC12-1SSLR

1-port STS-12c/STM-4c SMF long reach port adapters

WAS3-2

WAI-ATM25-12P

12-port ATM 25 port adapters with 96-pin telco cable

WAS3-2

WAI-T3-2BNC

2-port DS-3 port adapters

WAS1-1

WAI-E3-2BNC

2-port E3 port adapters

WAS1-1

WAI-T3-4BNC

4-port DS-3 port adapters

WAS3-1

WAI-E3-4BNC

4-port E3 port adapters

WAS3-3

WAI-T1-4RJ48

4-port T1 (ATM) with RJ-48 interface port adapters

WAS3-1

WAI-E1-4RJ48

4-port E1 (ATM) with RJ-48 interface port adapters

WAS3-1

WAI-E1-4BNC

4-port E1 (ATM) with BNC interface port adapters

WAS3-1

WAI-T1C-4RJ48

4-port T1 (circuit emulation) with RJ-48 interface port adapters

WAS3-1

WAI-E1C-4RJ48

4-port E1 (circuit emulation) with RJ-48 interface port adapters

WAS3-1

WAI-E1C-4BNC

4-port E1 (circuit emulation) with BNC interface port adapters

WAS3-1

L1010-PWR-DC

Power supply DC

WAS3-1

L1010-ASP-B-FC1

ASP1 with FC-per-class queuing (FC-PCQ2 )

WAS1-3

L1010-ASP-B-FCPFQ

ASP1 with FC-per-flow queuing (FC-PFQ3 )

WAS4-1

L1010-ASP-C-FC1

Hot-swappable ASP with FC-PCQ

W5-5

L1010-ASP-C-FCPFQ

Hot-swappable multiservice switch route processor

W5-5

C85MS-4E1-FRRJ48

4-port CE1 with RJ-48c interface Frame Relay port adapters

W5-5

WS-X5165

ATM-Fabric Integration Module for the Catalyst 5500

W5-5

C85MS-1DS3-FRBNC

1-port CDS3 Frame Relay port adapter

W5-9

C85MS-ATM25-4P

4-port 25-Mbps port adapter

W5-9

C85MS-8T1-IMA

8-port T1 port adapter with IMA4

Catalyst 8510
S851R2-12.0.4W

LightStream 1010
SL10R2-12.0.4W

C85MS-8E1-IMA-120

8-port E1 port adapter with IMA

Catalyst 8510
S851R2-12.0.4W

LightStream 1010
SL10R2-12.0.4W

C8510-ARM-64K

ATM router module

S851R2-12.0.10W5

C8510-ACL

ACL6 daughter card

S851R2-12.0.10W5

C85GE-1X-16K=

1-port Gigabit Ethernet 16K

S851R2-12.0.10W5

C85GE-1X-64K=

1-port Gigabit Ethernet 64K

S851R2-12.0.10W5

C85FE-8T-16K=

8-port 10/100 Fast Ethernet with RJ-45 16K

S851R2-12.0.10W5

C85FE-8T-64K=

8-port 10/100 Fast Ethernet with RJ-45 64K

S851R2-12.0.10W5

C85FE-8F-16K=

8-port 10/100 Fast Ethernet with MT-RJ 16K

S851R2-12.0.10W5

C85FE-8F-64K=

8-port 10/100 Fast Ethernet with MT-RJ 64K

S851R2-12.0.10W5

C8510-TSCAM-2P

Traffic-Shaping Carrier Module (TSCAM)

Catalyst 8510 MSR: S851R2-12107EY LightStream 1010: SL10R2-12107EY

1 ASP = ATM switch processor.

2 FC-PCQ = feature card per-class queuing.

3 FC-PFQ = feature card per-flow queuing.

4 IMA = inverse multiplexing over ATM.

5 The LightStream 1010 switch requires the ASP-C with FC-PFQ to support the ATM router module.

6 ACL = access control list.


Determining Your Software Release

To determine the version of Cisco IOS software currently running on either the Catalyst 8510 or the LightStream 1010 switch, log in to the switch and enter the show version EXEC command. The following is sample output from the show version command. The version number is indicated on the second line as shown:

Cisco Internetwork Operating System Software
IOS (tm) LS1010 W5-5 Software (LS1010-WP-M), Version 12.1(26)EB2

Additional command output lines include more information, such as processor revision numbers, memory amounts, hardware IDs, and partition information.

Other Firmware Code

Some of the port adapters supported on the Catalyst 8510 and LightStream 1010 switch have upgradeable FPGA and functional images. The FPGA and functional images include caveat fixes, but in most cases, it is not necessary to upgrade. The release notes that describe the caveats from the FPGA and functional images are available on the World Wide Web at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/l3sw/8540/rel_12_0/w5_6f/rel_note/fpga_rn/index.htm

For information describing the firmware update process, refer to the section "Maintaining Functional Images (Catalyst 8510 and LightStream 1010)" in the chapter "Managing Configuration Files, System Images, and Functional Images" in the ATM Switch Router Software Configuration Guide.

Feature Set Tables

The Cisco IOS release software is packaged in feature sets (also called software images) depending on the platform. Each feature set contains a specific set of Cisco IOS features. Table 3 lists the Cisco IOS software feature sets available for the Catalyst 8510 MSR and LightStream 1010 switch in Cisco IOS Release 12.1(26)EB2.


Note All Catalyst 8510 CSR features are also applicable to Catalyst 8510 MSR.


Table 3 Feature Sets Supported by the Catalyst 8510 MSR and LightStream 1010 Switch
 

Feature Set
Introduced in Release

Left-justified E.164 AFI support

12.1(5)EY1

SNMP1

12.1(5)EY1

Asynchronous support

12.1(5)EY1

PPP2 (SLIP3 /PPP)

12.1(5)EY1

IP4

12.1(5)EY1

NTP5

12.1(5)EY1

TACACS+6

12.1(5)EY1

Telnet

12.1(5)EY1

Point-to-point and point-to-multipoint permanent VCCs7 and VPCs8

12.1(5)EY1

Point-to-point and point-to-multipoint switched VCCs and VPCs (UNI 3.0)

12.1(5)EY1

Point-to-point and point-to-multipoint switched VCCs and VPCs (UNI 3.1)

12.1(5)EY1

Point-to-point and point-to-multipoint switched VCCs and VPCs (UNI 4.0)

12.1(5)EY1

Multipoint-to-point UNI signaling

12.1(5)EY1

Soft VCCs and VPCs

12.1(5)EY1

VP tunneling

12.1(5)EY1

VPI/VCI range support in ILMI 4.0

12.1(5)EY1

PNNI hierarchy

12.1(5)EY1

ILMI version 4.0

12.1(5)EY1

IISP9

12.1(5)EY1

LANE10 client (LEC11 ) and LANE Services (LES12 /BUS13 /LECS14 ) on ASP15

12.1(5)EY1

Token Ring LANE services

12.1(5)EY1

ATM ARP16 server on ASP

12.1(5)EY1

ATM ARP client on ASP

12.1(5)EY1

ATM tag switch router (TSR)

12.1(5)EY1

Port snooping

12.1(5)EY1

OAM17 F4 and F5

12.1(5)EY1

E.164 address translation

12.1(5)EY1

E.164 autoconversion

12.1(5)EY1

Circuit emulation

12.1(5)EY1

ATM access lists

12.1(5)EY1

ATM accounting

12.1(5)EY1

ATM RMON18

12.1(5)EY1

Multiple, weighted, dynamic thresholds for selective packet marking and discard

12.1(5)EY1

Shaped VP tunnels for CBR traffic (FC-PFQ only)

12.1(5)EY1

Substitution of other service categories in shaped VP tunnels (FC-PFQ feature cards only)

12.1(5)EY1

Dual leaky bucket policing (FC-PFQ feature cards only)

12.1(5)EY1

Scheduler/Service Class/PVC configuration for FC-PFQ feature cards

12.1(5)EY1

Logical multicast support (up to 254 leaves per output port, per point-to-multipoint VC) (FC-PFQ feature cards only)

12.1(5)EY1

Network clocking enhancements for smooth switchover (FC-PFQ feature cards only)

12.1(5)EY1

Per-VC or per-VP nondisruptive snooping (FC-PFQ feature cards only)

12.1(5)EY1

Support for non-zero MCR19 on ABR connections (FC-PFQ feature cards only)

12.1(5)EY1

Access lists on ILMI registration

12.1(5)EY1

CUGs

12.1(5)EY1

ATM soft restart

12.1(5)EY1

ATM accounting enhancements

12.1(5)EY1

CISCO-SYSLOG-MIB support

12.1(5)EY1

CISCO-CONFIG-COPY-MIB support

12.1(5)EY1

Signaling diagnostics and MIB

12.1(5)EY1

Supplemental AToM MIB

12.1(5)EY1

Frame Relay to ATM interworking features on the channelized E1 port adapter

12.1(5)EY1

Hierarchical VP tunnels

12.1(5)EY1

Remote logging for accounting

12.1(5)EY1

Tag switching VC-merge on non-UBR VP tunnels and hierarchical VP tunnels

12.1(5)EY1

PNNI complex node representation

12.1(5)EY1

Support for ATM-fabric integration module in Catalyst 5500

12.1(5)EY1

PNNI explicit paths

12.1(5)EY1

PNNI alternate link selection

12.1(5)EY1

Tag switching CoS

12.1(5)EY1

Network Clock Distribution Protocol

12.1(5)EY1

Simple Gateway Control Protocol

12.1(5)EY1

Inverse Multiplexing over ATM (IMA) groups

12.1(5)EY1

ATM End System Address (AESA) gateway

12.1(5)EY1

ATM overbooking

12.1(5)EY1

Framing overhead

12.1(5)EY1

NCDP MIB Support

12.1(5)EY1

L3-ATM routing and bridging via RFC 1483 (ATM router module)20

12.1(5)EY1

Point-to-point subinterfaces, only point-to-multipoint subinterfaces are supported

12.1(5)EY1

Power-on-diagnostics

12.1(5)EY1

ITT enhancements

12.1(6)EY

VBR on ATM router module support

12.1(7a)EY

Shaped tunnel support for ATM router module

12.1(7a)EY

Rate limiting

12.1(7a)EY

CiscoView

12.1(7a)EY

Radius support (TACACS+-like authentication)

12.1(7a)EY

Priority soft PVC preservation on IMA bandwidth reduction

12.1(10)E

Standard Signaling for Frame Relay soft PVCs

12.1(10)E

ATM threshold group enhancements

12.1(10)E

MPLS LDP21 support for LSR22

12.1(10)EY

Frame Relay PVCs terminated on ATM router module

12.1(10)EY

SONET MIB (RFC 2558)

12.1(10)EY

Two ended soft VC configuration

12.1(10)EY

PNNI connection trace

12.1(10)EY

SNMP provisioning of ATM interface traps to an SNMP host

12.1(12c)E

Traffic shaping on well-know VCs

12.1(12c)E

SSH (Secure Shell)

12.1(12c)EY

CES switched VCs

12.1(12c)EY

SNMP version 3

12.1(12c)EY

Point-to-multipoint soft PVCs

12.1(13)EB1

Overflow queuing for VBR-nrt on Frame Relay interface modules

12.1(13)EB1

Configuring Frame Relay frame size for Frame Relay-ATM interworking

12.1(13)EB1

Soft-PVC support on ATM 0 interface

12.1(13)EB1

RFC-2515 support

12.1(13)EB1

Traffic parameter modification for soft VCs and soft VPs

12.1(13)EB1

SNMP support for ARM subinterface

12.1(14)E1

CES MIB

12.1(14)EB1

SSH server version 2

12.1(19)EB

SSH version 2 client

12.1(20)EB

Explicit Paths on CES VCs

12.1(22)EB

Redundant soft-PVC and soft-PVP destinations

12.1(22)EB

ATM Forum CES MIB Version 2 support

12.1(22)EB

Pass along bit support for ATM signaling messages

12.1(22)EB

1 SNMP = Simple Network Management Protocol.

2 PPP = Point-to-Point Protocol.

3 SLIP = Serial Line Internet Protocol.

4 IP = Internet Protocol.

5 NTP = Network Time Protocol.

6 TACACS+ = Terminal Access Controller Access Control System Plus.

7 VCCs = virtual channel connections.

8 VPCs = virtual path connections.

9 IISP = Interim-Interswitch Signaling Protocol.

10 LANE = LAN emulation.

11 LEC = LAN emulation client.

12 LES = LAN emulation server.

13 BUS = broadcast and unknown server.

14 LECS = LAN emulation configuration server.

15 ASP = ATM switch processor.

16 ARP = Address Resolution Protocol.

17 OAM = Operation, Administration, and Maintenance.

18 RMON = Remote Monitoring.

19 MCR = minimum cell rate.

20 You can download the Catalyst 8510 software image on a LightStream 1010 switch to support L3-ATM (through the ATM router module). However, the LightStream 1010 switch software image does not include support for the ATM router module.

21 LDP = Label Distribution Protocol

22 LSR = label switch router


Release Names, Versions, and Part Numbers

Table 4 lists the release names, versions, and part numbers used with the Catalyst 8510 MSR and LightStream 1010 switch. Platform-specific information is noted in the table.

Table 4 Release Name to Version to Part Number Matrix for Catalyst 8510 MSR and LightStream 1010  

Release Name
Release Version
Part Number

W5

12.1(5)EY1

Catalyst 8510 MSR: S851R2-12105EY
LightStream 1010: SL10R2-12105EY

W6

12.1(6)EY

Catalyst 8510 MSR: S851R2-12106EY

LightStream 1010: SL10R2-12106EY

W7a

12.1(7a)EY

Catalyst 8510 MSR: S851R2-12107EY

LightStream 1010: SL10R2-12107EY

W7a

12.1(7a)EY1

Catalyst 8510 MSR: S851R2-12107EY

LightStream 1010: SL10R2-12107EY

10E

12.1(10)E

Catalyst 8510 MSR: S851R2-12110E

LightStream 1010: SLSR2-12110E

10EY

12.1(10)EY

Catalyst 8510 MSR: S851R2-12110EY

LightStream 1010: SLSR2-12110EY

11bE

12.1(11)E

Catalyst 8510 MSR: S851R2-12111E

LightStream 1010: SLSR2-12111E

11bE1

12.1(11)E1

Catalyst 8510 MSR: S851R2-12111E1

LightStream 1010: SLSR2-12111E1

12cE

12.1(12c)E

Catalyst 8510 MSR: S851R2-12112E

LightStream 1010: SLSR2-12112E

12cE1

12.1(12c)E1

Catalyst 8510 MSR: S851R2-12112E1

LightStream 1010: SLSR2-12112E1

12cEY

12.1(12c)EY

Catalyst 8510 MSR: S851R2-12112EY

LightStream 1010: SLSR2-12112EY

13E1

12.1(13)E1

Catalyst 8510 MSR: S851R2-12113E1

LightStream 1010: SLSR2-12113E1

13EB1

12.1(13)EB1

Catalyst 8510 MSR: S851R2-12113EB1

LightStream 1010: SLSR2-12113E1B

14E1

12.1(14)E1

Catalyst 8510 MSR: S851R2-12114E1

LightStream 1010: SLSR2-12114E1

14EB

12.1(14)EB

Catalyst 8510 MSR: S851R2-12114EB

LightStream 1010: SLSR2-12114EB

19E

12.1(19)E

Catalyst 8510 MSR: S851R2-12119E

LightStream 1010: SLSR2-12119E

14EB1

12.1(14)EB1

Catalyst 8510 MSR: S851R2-12114EB1

LightStream 1010: SLSR2-12114EB1

19E2

12.1(19)E2

Catalyst 8510 MSR: S851R2-12119E2

LightStream 1010: SLSR2-12119E2

20E

12.1(20)E

Catalyst 8510 MSR: S851R2-12120E

LightStream 1010: SLSR2-12120E

20EB

12.1(20)EB

Catalyst 8510 MSR: S851R2-12120EB

LightStream 1010: SLSR2-12120EB

22E

12.1(22)E

Catalyst 8510 MSR: S851R2-12122E

LightStream 1010: SLSR2-12122E

22EB

12.1(22)EB

Catalyst 8510 MSR: S851R2-12122EB

LightStream 1010: SLSR2-12122EB

23EB

12.1(23)EB

Catalyst 8510 MSR: S851R2-12123EB

LightStream 1010: SLSR2-12123EB

26EB

12.1(26)EB

Catalyst 8510 MSR: S851R2-12126EB

LightStream 1010: SLSR2-12126EB

26EB1

12.1(26)EB1

Catalyst 8510 MSR: S851R2-12126EB1

LightStream 1010: SLSR2-12126EB1


New and Changed Information

This section includes new features that appear in this and previous releases of Cisco IOS Release 12.1 software. The new features are sorted by release number.

New Features in Release 12.1(26)EB2

Catalyst 8510 MSR

There are no new features for the Catalyst 8510 MSR in Cisco IOS Release 12.1(26)EB2.

New Features in Release 12.1(26)EB1

Catalyst 8510 MSR

There are no new features for the Catalyst 8510 MSR in Cisco IOS Release 12.1(26)EB1.

New Features in Release 12.1(26)EB

Catalyst 8510 MSR

The following new features are available for the Catalyst 8510 MSR in Cisco IOS Release 12.1(26)EB:

Access Filters for SPVC Passive Soft Connections

SPVC Back-up Address support

Timer Rules based SPVC/SPVP

New Features in Release 12.1(23)EB

Catalyst 8510 MSR and LightStream 1010

The following new features are available for the Catalyst 8510 MSR in Cisco IOS Release 12.1(23)EB:

Configuring Point-to-Multipoint CES Soft PVC Connections

Enabling and Disabling Roots and Leaves of Point-to-Multipoint Soft PVC Connections

Catalyst 8510 CSR

There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(23)EB.

New Features in Release 12.1(22)EB

Catalyst 8510 MSR and LightStream 1010

The following new features are available for the Catalyst 8510 MSR in Cisco IOS Release 12.1(22)EB:

Explicit paths on CES VCs

Redundant soft-PVC and soft-PVP destinations

ATM Forum CES MIB support

Pass along bit support for ATM signaling messages

Catalyst 8510 CSR

There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(22)EB.

New Features in Release 12.1(22)E

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR in Cisco IOS Release 12.1(22)E.

Catalyst 8510 CSR

There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(22)E.

New Features in Release 12.1(20)EB

Catalyst 8510 MSR and LightStream 1010

The following new feature is available for the Catalyst 8510 MSR in Cisco IOS Release 12.1(20)EB:

SSH version 2 client

Catalyst 8510 CSR

There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(20)EB.

New Features in Release 12.1(20)E

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR in Cisco IOS Release 12.1(20)E.

Catalyst 8510 CSR

There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(20)E.

New Features in Release 12.1(19)EB

Catalyst 8510 MSR and LightStream 1010

The following new feature is available for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(19)EB:

SSH server version 2

Catalyst 8510 CSR

There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(19)EB.

New Features in Release 12.1(19)E2

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR in Cisco IOS Release 12.1(19)E2.

Catalyst 8510 CSR

There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(19)E2.

New Features in Release 12.1(14)EB1

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(14)EB1.

New Features in Release 12.1(19)E

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR in Cisco IOS Release 12.1(19)E.

New Features in Release 12.1(14)EB

Catalyst 8510 MSR and LightStream 1010

The following new features are available for the Catalyst 8510 MSR in Cisco IOS Release 12.1(14)EB:

RFC1406 enhancements for CES provides SNMP support for:

Read and write access to CES interface related objects using dsx1ConfigTable (CSCdv46424)

Read access to DS0 time slot or slots using dsx1FracTable (CSCin18227)

Read access to NSAP address configuration of the circuit using ciscoAtmIfSoftVcDestAddress of CISCO-ATM-IF-MIB (CSCdz32265)

New Features in Release 12.1(14)E1

Catalyst 8510 MSR and LightStream 1010

The following new feature is available for the Catalyst 8510 MSR in Cisco IOS Release 12.1(14)E1:

SNMP support for ARM subinterface

New Features in Release 12.1(13)EB1

Catalyst 8510 MSR and LightStream 1010

The following new features are available for the Catalyst 8510 MSR in Cisco IOS Release 12.1(13)EB1:

Point-to-Multipoint Soft PVCs

Overflow queuing for VBR-nrt on Frame Relay interface modules

Configuring Frame Relay frame size for Frame Relay-ATM interworking

Configuring service class overbooking

Soft-PVC support on ATM 0 interface

RFC-2515 support

Traffic parameter modification for soft VCs and Soft VPs

New Features in Release 12.1(13)E1

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(13)E1.

New Features in Release 12.1(12c)EY

Catalyst 8510 MSR and LightStream 1010

The following new features are available for the Catalyst 8510 MSR in Cisco IOS Release 12.1(12c)EY:

SSH (Secure Shell)

Circuit Emulation Services (CES) switched VCs

SNMP version 3

New Features in Release 12.1(12c)E1

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(12c)E1.

New Features in Release 12.1(12c)E

Catalyst 8510 MSR and LightStream 1010

The following new feature is available for the Catalyst 8510 MSR in Cisco IOS Release 12.1(12c)E:

SNMP provisioning of ATM interface event traps to an SNMP host

Traffic shaping on well-known VCs

New Features in Release 12.1(11b)E1

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(11b)E1.

New Features in Release 12.1(11b)E

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(11b)E.

New Features in Release 12.1(10)EY

Catalyst 8510 MSR and LightStream 1010

The following features are available for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(10)EY:

MPLS LDP (Label Distribution Protocol) support for both LSR (label switch router) and LER

MPLS LER on the 10/100BASE-TX, 100BASE-FX interface modules

Frame Relay PVCs terminated on ATM router module

SONET MIB (RFC 2558)

Two ended soft VC configuration

PNNI connection trace

New Features in Release 12.1(10)E

Catalyst 8510 MSR and LightStream 1010

The following features are available for the Catalyst 8510 MSR and LightStream 1010 switch routers in
Cisco IOS Release 12.1(10)E:

Priority soft PVC preservation on IMA bandwidth reduction

Standard signalling for Frame Relay soft PVCs

ATM threshold group enhancements

New Features in Release 12.1(7a)EY1

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(7a)EY1.

New Features in Cisco IOS Release 12.1(7a)EY

Catalyst 8510 MSR and LightStream 1010

The following features are available for the Catalyst 8510 and LightStream 1010 switch routers in Cisco IOS Release 12.1(7a)EY:

VBR on ATM router module support

Shaped tunnel support for ATM router module

Rate limiting

Traffic-Shaping Carrier Module (TSCAM)

ADP

Radius support (TACACS+-like authentication)

New Features in Cisco IOS Release 12.1(6)EY

Catalyst 8510 MSR and LightStream 1010

The following new feature is available for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(6)EY:

ITT enhancements

New Features in Cisco IOS Release 12.1(5)EY1

Catalyst 8510 MSR and LightStream 1010

The following new feature is available for the Catalyst 8510 MSR and the LightStream 1010 switch in Cisco IOS Release 12.1(5)EY1.

Power-on-diagnostics

Caveats

Caveats describe unexpected behavior or defects in Cisco IOS software releases. Caveats use a tracking number (DDTS number) and the release number to maintain the database information. For a list of the caveats and their status for the Cisco IOS Release for the Catalyst 8510 and the LightStream 1010 switch, see the document, Release Notes for the Catalyst 8510 and the LightStream 1010 Switch for Cisco IOS Release 12.1(26)EB1, Part 2: Caveats.

Restriction

This section describes the following Catalyst 8510 MSR and the LightStream 1010 switch restriction:

Unicast Reverse Path Forwarding Not Supported

The Catalyst 8510 MSR and the LightStream 1010 switches do not support Unicast Reverse Path Forwarding (uRPF).

Interoperability

Starting with Cisco IOS Release 12.0(10)W5(18b) software release, hardware and software functionality interoperability exists between CSR interface modules and MSR interface modules by way of the ATM router module on the MSR chassis running an MSR image.

Y2K Compliance

Catalyst 8510 and LightStream 1010 systems running Cisco IOS Release 12.0(0.6)W5(1) or later have been certified as Y2K compliant. For more information, see the following URL:

http://www.cisco.com/warp/public/752/2000/.

Related Documentation

Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series

Site Preparation

Quick Reference Catalyst 8510 and LightStream 1010 Hardware Information

ATM and Layer 3 Module Installation Guide

Guide to ATM Technology

ATM and Layer 3 Quick Software Configuration Guide

ATM and Layer 3 Switch Router Command Reference

ATM Switch Router Software Configuration Guide

Layer 3 Software Feature and Configuration Guide

Obtaining Documentation

Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems.

Cisco.com

You can access the most current Cisco documentation at this URL:

http://www.cisco.com/univercd/home/home.htm

You can access the Cisco website at this URL:

http://www.cisco.com

You can access international Cisco websites at this URL:

http://www.cisco.com/public/countries_languages.shtml

Ordering Documentation

You can find instructions for ordering documentation at this URL:

http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm

You can order Cisco documentation in these ways:

Registered Cisco.com users (Cisco direct customers) can order Cisco product documentation from the Ordering tool:

http://www.cisco.com/en/US/partner/ordering/index.shtml

Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco Systems Corporate Headquarters (California, USA) at 408 526-7208 or, elsewhere in North America, by calling 800 553-NETS (6387).

Documentation Feedback

You can send comments about technical documentation to bug-doc@cisco.com.

You can submit comments by using the response card (if present) behind the front cover of your document or by writing to the following address:

Cisco Systems
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883

We appreciate your comments.

Obtaining Technical Assistance

For all customers, partners, resellers, and distributors who hold valid Cisco service contracts, Cisco Technical Support provides 24-hour-a-day, award-winning technical assistance. The Cisco Technical Support Website on Cisco.com features extensive online support resources. In addition, Cisco Technical Assistance Center (TAC) engineers provide telephone support. If you do not hold a valid Cisco service contract, contact your reseller.

Cisco Technical Support Website

The Cisco Technical Support Website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The website is available 24 hours a day, 365 days a year at this URL:

http://www.cisco.com/techsupport

Access to all tools on the Cisco Technical Support Website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a user ID or password, you can register at this URL:

http://tools.cisco.com/RPF/register/register.do

Submitting a Service Request

Using the online TAC Service Request Tool is the fastest way to open S3 and S4 service requests. (S3 and S4 service requests are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Service Request Tool automatically provides recommended solutions. If your issue is not resolved using the recommended resources, your service request will be assigned to a Cisco TAC engineer. The TAC Service Request Tool is located at this URL:

http://www.cisco.com/techsupport/servicerequest

For S1 or S2 service requests or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco TAC engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly.

To open a service request by telephone, use one of the following numbers:

Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 227)
EMEA: +32 2 704 55 55
USA: 1 800 553 2447

For a complete list of Cisco TAC contacts, go to this URL:

http://www.cisco.com/techsupport/contacts

Definitions of Service Request Severity

To ensure that all service requests are reported in a standard format, Cisco has established severity definitions.

Severity 1 (S1)—Your network is "down," or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.

Severity 2 (S2)—Operation of an existing network is severely degraded, or significant aspects of your business operation are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation.

Severity 3 (S3)—Operational performance of your network is impaired, but most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels.

Severity 4 (S4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations.

Obtaining Additional Publications and Information

Information about Cisco products, technologies, and network solutions is available from various online and printed sources.

Cisco Marketplace provides a variety of Cisco books, reference guides, and logo merchandise. Visit Cisco Marketplace, the company store, at this URL:

http://www.cisco.com/go/marketplace/

The Cisco Product Catalog describes the networking products offered by Cisco Systems, as well as ordering and customer support services. Access the Cisco Product Catalog at this URL:

http://cisco.com/univercd/cc/td/doc/pcat/

Cisco Press publishes a wide range of general networking, training and certification titles. Both new and experienced users will benefit from these publications. For current Cisco Press titles and other information, go to Cisco Press at this URL:

http://www.ciscopress.com

Packet magazine is the Cisco Systems technical user magazine for maximizing Internet and networking investments. Each quarter, Packet delivers coverage of the latest industry trends, technology breakthroughs, and Cisco products and solutions, as well as network deployment and troubleshooting tips, configuration examples, customer case studies, certification and training information, and links to scores of in-depth online resources. You can access Packet magazine at this URL:

http://www.cisco.com/packet

iQ Magazine is the quarterly publication from Cisco Systems designed to help growing companies learn how they can use technology to increase revenue, streamline their business, and expand services. The publication identifies the challenges facing these companies and the technologies to help solve them, using real-world case studies and business strategies to help readers make sound technology investment decisions. You can access iQ Magazine at this URL:

http://www.cisco.com/go/iqmagazine

Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL:

http://www.cisco.com/ipj

World-class networking training is available from Cisco. You can view current offerings at this URL:

http://www.cisco.com/en/US/learning/index.html