Guest

Cisco Catalyst 8500 Series Multiservice Switch Routers

Release Notes for the Catalyst 8510 and LightStream 1010 Switch for Cisco IOS Release 12.1(26)E8, Part 1: System Requirements

  • Viewing Options

  • PDF (673.7 KB)
  • Feedback
Release Notes for the Catalyst 8510 and the LightStream 1010 Switch for Cisco IOS Release 12.1(26)E8, Part 1: System Requirements

Table Of Contents

Release Notes for the Catalyst 8510 and the LightStream 1010 Switch for Cisco IOS Release 12.1(26)E8, Part 1: System Requirements

Contents

Introduction

System Requirements

Memory Requirements

Catalyst 8510 MSR and LightStream 1010

Catalyst 8510 CSR

Hardware Supported

Determining Your Software Release

Other Firmware Code

Feature Set Tables

Release Names, Versions, and Part Numbers

Upgrade and Downgrade Notes

New and Changed Information

New Features in Release 12.1(26)E8

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(26)E7

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(26)E5

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(26)E4

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(26)E3

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(26)E2

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(26)E1

Catalyst 8510 MSR and LightStream 1010

Catalyst 8510 CSR

New Features in Release 12.1(26)E

Catalyst 8510 MSR and LightStream 1010

Catalyst 8510 CSR

New Features in Release 12.1(23)E1

Catalyst 8510 MSR and LightStream 1010

Catalyst 8510 CSR

New Features in Release 12.1(23)E

Catalyst 8510 MSR and LightStream 1010

Catalyst 8510 CSR

New Features in Release 12.1(22)E

Catalyst 8510 MSR and LightStream 1010

Catalyst 8510 CSR

New Features in Release 12.1(20)EB

Catalyst 8510 MSR and LightStream 1010

Catalyst 8510 CSR

New Features in Release 12.1(20)E

Catalyst 8510 MSR and LightStream 1010

Catalyst 8510 CSR

New Features in Release 12.1(19)E2

Catalyst 8510 MSR and LightStream 1010

Catalyst 8510 CSR

New Features in Release 12.1(14)EB1

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(19)E

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(14)EB

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(14)E1

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(13)EB1

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(13)E1

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(12c)EY

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(12c)E1

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(12c)E

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(11b)E1

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(11b)E

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(10)EY

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(10)E

Catalyst 8510 MSR and LightStream 1010

New Features in Release 12.1(7a)EY1

Catalyst 8510 MSR and LightStream 1010

New Features in Cisco IOS Release 12.1(7a)EY

Catalyst 8510 MSR and LightStream 1010

New Features in Cisco IOS Release 12.1(6)EY

Catalyst 8510 MSR and LightStream 1010

New Features in Cisco IOS Release 12.1(5)EY1

Catalyst 8510 MSR and LightStream 1010

Caveats

Restriction

Unicast Reverse Path Forwarding Not Supported

Interoperability

Y2K Compliance

Related Documentation

Obtaining Documentation

Cisco.com

Ordering Documentation

Documentation Feedback

Obtaining Technical Assistance

Cisco TAC Website

Opening a TAC Case

TAC Case Priority Definitions

Obtaining Additional Publications and Information


Release Notes for the Catalyst 8510 and the LightStream 1010 Switch for Cisco IOS Release 12.1(26)E8, Part 1: System Requirements


August 08, 2007

Catalyst 8510 and LightStream 1010 Switch for Cisco IOS Release 12.1(26)E8

Text Part Number: OL-14457-01

This document describes the features and caveats for Cisco IOS Release 12.1(26)E8 software for the Catalyst 8510 and the LightStream 1010 switch.


Note All information pertains to both the Catalyst 8510 and LightStream 1010 switch platforms, unless differences between the platforms are noted in the text.


Contents

This document includes the following sections:

Introduction

System Requirements

Upgrade and Downgrade Notes

New and Changed Information

Caveats

Restriction

Interoperability

Y2K Compliance

Related Documentation

Obtaining Documentation

Obtaining Technical Assistance

Obtaining Additional Publications and Information

Introduction

The Catalyst 8510 and LightStream 1010 switch provide switched ATM connections to individual workstations, servers, LAN segments, or other ATM switches and routers using fiber-optic, unshielded twisted-pair (UTP), and coaxial cable.


Note The ATM switch processors (hardware version 4.0 or higher) and all port adapters can be installed in the Catalyst 5500 switch chassis.


The Catalyst 8510 CSR belongs to a class of high-performance Layer 3 switch routers. It is optimized for the campus LAN or the intranet and provides both wirespeed Ethernet routing and switching services.

System Requirements

This section describes the system requirements for Cisco IOS Release 12.1 and includes the following sections:

Memory Requirements

Hardware Supported

Determining Your Software Release

Other Firmware Code

Feature Set Tables

Release Names, Versions, and Part Numbers

Memory Requirements

Catalyst 8510 MSR and LightStream 1010

The DRAM memory configuration is 64-MB DRAM (MEM-ASP64M), which is the default for both the Catalyst 8510 and the LightStream 1010 switch platforms.

Catalyst 8510 CSR

Table 1 lists the default Flash and DRAM memory for the Catalyst 8510 CSR, as well as memory upgrade options.

Table 1 Catalyst 8510 CSR Default Memory and Upgrade Options 

Memory Type
Catalyst 8510 CSR Defaults
Upgrade Options

Flash memory

16 MB

MEM-ASP-FLC16M=
MEM-ASP-FLC20M=

DRAM

64 MB

None


To download and store a copy of the Catalyst 8510 CSR software image, we recommend using a minimum 20 MB Flash PC Card, which will allow you to have two or more images installed at the same time.

The Catalyst 8510 CSR boots from its onboard Flash memory by default. To change this default to boot from a Flash PC Card instead, you must change the configuration register setting to 0x2102. Refer to the Layer 3 Switching Software Feature and Configuration Guide for more information.

Hardware Supported

Table 2 lists the interfaces supported by both the Catalyst 8510 MSR and LightStream 1010 switch and Cisco IOS Release 12.1(26)E8 and their minimum software release requirements. All platform specific requirements are noted in the table. Table 2 lists this information for the Catalyst 8510 CSR.


Note Although minimum software versions are listed, we strongly recommend that you use the latest available software release for all Catalyst 8510 and LightStream 1010 hardware.


Table 2 Catalyst 8510 MSR and LightStream 1010 Interface Modules and
Minimum Software Required  

Part Number
Description
Minimum Software Version Required

WAI-OC3-4MM

4-port STS-3c/STM-1 multimode fiber port adapters

WAS1-1

WAI-OC3-4SS

4-port STS-3c/STM-1 single-mode fiber port adapters

WAS1-1

WAI-OC3-4U5

4-port STS-3c/STM-1 UTP-5 port adapters

WAS1-1

WAI-OC3-4SSLR

4-port STS-3c/STM-1 SMF long reach port adapters

WAS3-2

WAI-OC3-1S3M

OC-3 mix port adapter module, 1 IR+ port and 3 MM ports

WAS3-1

WAI-OC12-1MM

1-port STS-12c/STM-4c multimode fiber port adapters

WAS1-2

WAI-OC12-1SS

1-port STS-12c/STM-4c SMF port adapters

WAS1-1

WAI-OC12-1SSLR

1-port STS-12c/STM-4c SMF long reach port adapters

WAS3-2

WAI-ATM25-12P

12-port ATM 25 port adapters with 96-pin telco cable

WAS3-2

WAI-T3-2BNC

2-port DS-3 port adapters

WAS1-1

WAI-E3-2BNC

2-port E3 port adapters

WAS1-1

WAI-T3-4BNC

4-port DS-3 port adapters

WAS3-1

WAI-E3-4BNC

4-port E3 port adapters

WAS3-3

WAI-T1-4RJ48

4-port T1 (ATM) with RJ-48 interface port adapters

WAS3-1

WAI-E1-4RJ48

4-port E1 (ATM) with RJ-48 interface port adapters

WAS3-1

WAI-E1-4BNC

4-port E1 (ATM) with BNC interface port adapters

WAS3-1

WAI-T1C-4RJ48

4-port T1 (circuit emulation) with RJ-48 interface port adapters

WAS3-1

WAI-E1C-4RJ48

4-port E1 (circuit emulation) with RJ-48 interface port adapters

WAS3-1

WAI-E1C-4BNC

4-port E1 (circuit emulation) with BNC interface port adapters

WAS3-1

L1010-PWR-DC

Power supply DC

WAS3-1

L1010-ASP-B-FC1

ASP1 with FC-per-class queuing (FC-PCQ2 )

WAS1-3

L1010-ASP-B-FCPFQ

ASP1 with FC-per-flow queuing (FC-PFQ3 )

WAS4-1

L1010-ASP-C-FC1

Hot-swappable ASP with FC-PCQ

W5-5

L1010-ASP-C-FCPFQ

Hot-swappable multiservice switch route processor

W5-5

C85MS-4E1-FRRJ48

4-port CE1 with RJ-48c interface Frame Relay port adapters

W5-5

WS-X5165

ATM-Fabric Integration Module for the Catalyst 5500

W5-5

C85MS-1DS3-FRBNC

1-port CDS3 Frame Relay port adapter

W5-9

C85MS-ATM25-4P

4-port 25-Mbps port adapter

W5-9

C85MS-8T1-IMA

8-port T1 port adapter with IMA4

Catalyst 8510
S851R2-12.0.4W

LightStream 1010
SL10R2-12.0.4W

C85MS-8E1-IMA-120

8-port E1 port adapter with IMA

Catalyst 8510
S851R2-12.0.4W

LightStream 1010
SL10R2-12.0.4W

C8510-ARM-64K

ATM router module

S851R2-12.0.10W5

C8510-ACL

ACL6 daughter card

S851R2-12.0.10W5

C85GE-1X-16K=

1-port Gigabit Ethernet 16K

S851R2-12.0.10W5

C85GE-1X-64K=

1-port Gigabit Ethernet 64K

S851R2-12.0.10W5

C85FE-8T-16K=

8-port 10/100 Fast Ethernet with RJ-45 16K

S851R2-12.0.10W5

C85FE-8T-64K=

8-port 10/100 Fast Ethernet with RJ-45 64K

S851R2-12.0.10W5

C85FE-8F-16K=

8-port 10/100 Fast Ethernet with MT-RJ 16K

S851R2-12.0.10W5

C85FE-8F-64K=

8-port 10/100 Fast Ethernet with MT-RJ 64K

S851R2-12.0.10W5

C8510-TSCAM-2P

Traffic-Shaping Carrier Module (TSCAM)

Catalyst 8510 MSR: S851R2-12107EY LightStream 1010: SL10R2-12107EY

1 ASP = ATM switch processor.

2 FC-PCQ = feature card per-class queuing.

3 FC-PFQ = feature card per-flow queuing.

4 IMA = inverse multiplexing over ATM.

5 The LightStream 1010 switch requires the ASP-C with FC-PFQ to support the ATM router module.

6 ACL = access control list.


Determining Your Software Release

To determine the version of Cisco IOS software currently running on either the Catalyst 8510 or the LightStream 1010 switch, log in to the switch and enter the show version EXEC command. The following is sample output from the show version command. The version number is indicated on the second line as shown:

Cisco Internetwork Operating System Software
IOS (tm) LS1010 W5-5 Software (LS1010-WP-M), Version 12.1(26)E8

Additional command output lines include more information, such as processor revision numbers, memory amounts, hardware IDs, and partition information.

Other Firmware Code

Some of the port adapters supported on the Catalyst 8510 and LightStream 1010 switch have upgradeable FPGA and functional images. The FPGA and functional images include caveat fixes, but in most cases, it is not necessary to upgrade. The release notes that describe the caveats from the FPGA and functional images are available on the World Wide Web at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/l3sw/8540/rel_12_0/w5_6f/rel_note/fpga_rn/index.htm

For information describing the firmware update process, refer to the section "Maintaining Functional Images (Catalyst 8510 and LightStream 1010)" in the chapter "Managing Configuration Files, System Images, and Functional Images" in the ATM Switch Router Software Configuration Guide.

Feature Set Tables

The Cisco IOS release software is packaged in feature sets (also called software images) depending on the platform. Each feature set contains a specific set of Cisco IOS features. Table 3 lists the Cisco IOS software feature sets available for the Catalyst 8510 MSR and LightStream 1010 switch in Cisco IOS Release 12.1(26)E8.


Note All Catalyst 8510 CSR features are also applicable to Catalyst 8510 MSR.


Table 3 Feature Sets Supported by the Catalyst 8510 MSR and LightStream 1010 Switch  

Feature Set
12. 1(26)E8
12.1(26)E7
12.1(26)E5
12.1(26)E4
12.1(26)E3
12.1(26)E2
12.1(26)E1
12.1(26)E
12.1(23)E1
12.1(23)E
12.1(22)E
12.1(20)EB1
12.1(20)E
12.1(19)E2
12.1(14)EB1
12.1(19)E
12.1(14)EB
12.1(14)E1
12.1(13)EB1
12.1(13)E1
12.1(12c)EY
12.1(12c)E1
12.1(12c)E
12.1(11b)E1
12.1(11b)E
12.1(10)EY
12.1(10)E
12.1(7a)EY1
12.1(7a)EY
12.1(6)EY
12.1(5)EY1

Left-justified E.164 AFI support

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

SNMP1

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Asynchronous support

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

PPP2 (SLIP3 /PPP)

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

IP4

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

NTP5

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

TACACS+6

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Telnet

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Point-to-point and point-to-multipoint permanent VCCs7 and VPCs8

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Point-to-point and point-to-multipoint switched VCCs and VPCs (UNI 3.0)

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Point-to-point and point-to-multipoint switched VCCs and VPCs (UNI 3.1)

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Point-to-point and point-to-multipoint switched VCCs and VPCs (UNI 4.0)

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Multipoint-to-point UNI signaling

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Soft VCCs and VPCs

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

VP tunneling

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

VPI/VCI range support in ILMI 4.0

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

PNNI hierarchy

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

ILMI version 4.0

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

IISP9

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

LANE10 client (LEC11 ) and LANE Services (LES12 /BUS13 /LECS14 ) on ASP15

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Token Ring LANE services

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

ATM ARP16 server on ASP

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

ATM ARP client on ASP

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

ATM tag switch router (TSR)

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Port snooping

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

OAM17 F4 and F5

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

E.164 address translation

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

E.164 autoconversion

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Circuit emulation

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

ATM access lists

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

ATM accounting

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

ATM RMON18

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Multiple, weighted, dynamic thresholds for selective packet marking and discard

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Shaped VP tunnels for CBR traffic (FC-PFQ only)

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Substitution of other service categories in shaped VP tunnels (FC-PFQ feature cards only)

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Dual leaky bucket policing (FC-PFQ feature cards only)

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Scheduler/Service Class/PVC configuration for FC-PFQ feature cards

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Logical multicast support (up to 254 leaves per output port, per point-to-multipoint VC) (FC-PFQ feature cards only)

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Network clocking enhancements for smooth switchover (FC-PFQ feature cards only)

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Per-VC or per-VP nondisruptive snooping (FC-PFQ feature cards only)

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Support for non-zero MCR19 on ABR connections (FC-PFQ feature cards only)

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Access lists on ILMI registration

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

CUGs

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

ATM soft restart

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

ATM accounting enhancements

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

CISCO-SYSLOG-MIB support

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

CISCO-CONFIG-COPY-MIB support

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Signaling diagnostics and MIB

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Supplemental AToM MIB

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Frame Relay to ATM Interworking Features on the Channelized E1 Port Adapter

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Hierarchical VP Tunnels

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Remote logging for accounting

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Tag Switching VC-Merge on Non-UBR VP Tunnels and Hierarchical VP Tunnels

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

PNNI Complex Node Representation

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Support for ATM-Fabric Integration Module in Catalyst 5500

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

PNNI explicit paths

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

PNNI alternate link selection

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Tag switching CoS

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Network Clock Distribution Protocol

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Simple Gateway Control Protocol

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Inverse Multiplexing over ATM (IMA) groups

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

ATM End System Address (AESA) gateway

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

ATM overbooking

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Framing overhead

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

NCDP MIB Support

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

L3-ATM routing and bridging via RFC 1483 (ATM router module)20

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Point-to-point subinterfaces, only point-to-multipoint subinterfaces are supported

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

Power-on-diagnostics

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

ITT Enhancements

X

X

X

X

X

X

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

 

VBR on ATM router module support

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

   

Shaped Tunnel Support for ATM router module

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

   

Rate Limiting

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

   

CiscoView

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

   

Radius Support (TACACS+-like authentication)

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

   

Priority Soft PVC Preservation on IMA Bandwidth Reduction

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

       

Standard Signaling for Frame Relay Soft PVCs

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

       

ATM Threshold Group Enhancements

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

       

MPLS LDP21 support for LSR22

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

         

Frame Relay PVCs terminated on ATM router module

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

         

SONET MIB (RFC 2558)

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

         

Two Ended Soft VC Configuration

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

         

PNNI Connection Trace

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

         

SNMP provisioning of ATM interface traps to an SNMP Host

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

               

Traffic shaping on well-know VCs

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

               

SSH (Secure Shell)

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

                   

CES switched VCs

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

                   

SNMP Version 3

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

                   

Point-to-Multipoint Soft PVCs

                     

X

   

X

     

X

                       

Overflow Queuing for VBR-nrt on Frame Relay interface modules

                     

X

   

X

     

X

                       

Configuring Frame Relay frame size for Frame Relay-ATM interworking

                     

X

   

X

     

X

                       

Soft-PVC support on ATM 0 interface

                     

X

   

X

     

X

                       

RFC-2515 support

                     

X

   

X

     

X

                       

Traffic parameter modification for Soft VCs and Soft VPs

                     

X

   

X

     

X

                       

SNMP support for ARM sub interface

           

X

X

X

X

X

X

X

X

X

X

X

X

                         

CES MIB

                     

X

   

X

                               

SSH Server Version 2

                     

X

                                     

LANE with Jumbo Frames on enhanced ATM router module

                     

X

                                     

1 SNMP = Simple Network Management Protocol.

2 PPP = Point-to-Point Protocol.

3 SLIP = Serial Line Internet Protocol.

4 IP = Internet Protocol.

5 NTP = Network Time Protocol.

6 TACACS+ = Terminal Access Controller Access Control System Plus.

7 VCCs = virtual channel connections.

8 VPCs = virtual path connections.

9 IISP = Interim-Interswitch Signaling Protocol.

10 LANE = LAN emulation.

11 LEC = LAN emulation client.

12 LES = LAN emulation server.

13 BUS = broadcast and unknown server.

14 LECS = LAN emulation configuration server.

15 ASP = ATM switch processor.

16 ARP = Address Resolution Protocol.

17 OAM = Operation, Administration, and Maintenance.

18 RMON = Remote Monitoring.

19 MCR = minimum cell rate.

20 You can download the Catalyst 8510 software image on a LightStream 1010 switch to support L3-ATM (through the ATM router module). However, the LightStream 1010 switch software image does not include support for the ATM router module.

21 LDP = Label Distribution Protocol

22 LSR = label switch router


Release Names, Versions, and Part Numbers

Table 4 lists the release names, versions, and part numbers used with the Catalyst 8510 MSR and LightStream 1010 switch. Platform-specific information is noted in the table.

Table 4 Release Name to Version to Part Number Matrix for Catalyst 8510 MSR and LightStream 1010  

Release Name
Release Version
Part Number

W5

12.1(5)EY1

Catalyst 8510 MSR: S851R2-12105EY
LightStream 1010: SL10R2-12105EY

W6

12.1(6)EY

Catalyst 8510 MSR: S851R2-12106EY

LightStream 1010: SL10R2-12106EY

W7a

12.1(7a)EY

Catalyst 8510 MSR: S851R2-12107EY

LightStream 1010: SL10R2-12107EY

W7a

12.1(7a)EY1

Catalyst 8510 MSR: S851R2-12107EY

LightStream 1010: SL10R2-12107EY

10E

12.1(10)E

Catalyst 8510 MSR: S851R2-12110E

LightStream 1010: SLSR2-12110E

10EY

12.1(10)EY

Catalyst 8510 MSR: S851R2-12110EY

LightStream 1010: SLSR2-12110EY

11bE

12.1(11)E

Catalyst 8510 MSR: S851R2-12111E

LightStream 1010: SLSR2-12111E

11bE1

12.1(11)E1

Catalyst 8510 MSR: S851R2-12111E1

LightStream 1010: SLSR2-12111E1

12cE

12.1(12c)E

Catalyst 8510 MSR: S851R2-12112E

LightStream 1010: SLSR2-12112E

12cE1

12.1(12c)E1

Catalyst 8510 MSR: S851R2-12112E1

LightStream 1010: SLSR2-12112E1

12cEY

12.1(12c)EY

Catalyst 8510 MSR: S851R2-12112EY

LightStream 1010: SLSR2-12112EY

13E1

12.1(13)E1

Catalyst 8510 MSR: S851R2-12113E1

LightStream 1010: SLSR2-12113E1

13EB1

12.1(13)EB1

Catalyst 8510 MSR: S851R2-12113EB1

LightStream 1010: SLSR2-12113E1B

14E1

12.1(14)E1

Catalyst 8510 MSR: S851R2-12114E1

LightStream 1010: SLSR2-12114E1

14EB

12.1(14)EB

Catalyst 8510 MSR: S851R2-12114EB

LightStream 1010: SLSR2-12114EB

19E

12.1(19)E

Catalyst 8510 MSR: S851R2-12119E

LightStream 1010: SLSR2-12119E

14EB1

12.1(14)EB1

Catalyst 8510 MSR: S851R2-12114EB1

LightStream 1010: SLSR2-12114EB1

19E2

12.1(19)E2

Catalyst 8510 MSR: S851R2-12119E2

LightStream 1010: SLSR2-12119E2

20E

12.1(20)E

Catalyst 8510 MSR: S851R2-12120E

LightStream 1010: SLSR2-12120E

20EB

12.1(20)EB

Catalyst 8510 MSR: S851R2-12120EB

LightStream 1010: SLSR2-12120EB

22E

12.1(22)E

Catalyst 8510 MSR: S851R2-12122E

LightStream 1010: SLSR2-12122E

23E

12.1(23)E

Catalyst 8510 MSR: S851R2-12123E

LightStream 1010: SLSR2-12123E

23E1

12.1(23)E1

Catalyst 8510 MSR: S851R2-12123E1

LightStream 1010: SLSR2-12123E1

26E

12.1(26)E

Catalyst 8510 MSR: S851R2-12126E

LightStream 1010: SLSR2-12126E

26E1

12.1(26)E1

Catalyst 8510 MSR: S851R2-12126E1

LightStream 1010: SLSR2-12126E1

26E2

12.1(26)E2

Catalyst 8510 MSR: S851R2-12126E2
LightStream 1010: SL10R2-12126E2

26E3

12.1(26)E3

Catalyst 8510 MSR: S851R2-12126E3
LightStream 1010: SL10R2-12126E3

26E4

12.1(26)E4

Catalyst 8510 MSR: S851R2-12126E4
LightStream 1010: SL10R2-12126E4

26E5

12.1(26)E5

Catalyst 8510 MSR: S851R2-12126E5
LightStream 1010: SL10R2-12126E5

26E7

12.1(26)E7

Catalyst 8510 MSR: S851R2-12126E7
LightStream 1010: SL10R2-12126E7

26E8

12.1(26)E8

Catalyst 8510 MSR: S851R2-12126E8
LightStream 1010: SL10R2-12126E8


Upgrade and Downgrade Notes

Following are some issues which you should be aware of during upgrade or downgrade of the Cisco IOS software for the Catalyst 8510 MSR:


Note The procedure used to upgrade and downgrade a Catalyst 8540 MSR is available on the following: http://www.cisco.com/warp/public/121/8540redundancy.shtml.


1. When a Frame Relay connection traffic table row (CTTR) index is created using the CLI a corresponding ATM CTTR is also created automatically by the switch and the MBS value (in the internally created ATM CTTR) is calculated using the Bc value configured on the Frame Relay side. However, the ATM CTTR can also be created using the CLI and then associated with a Frame Relay CTTR. If you create the Frame Relay CTTR and associated it with the manually created ATM CTTR, during an upgrade of Catalyst 8540 MSR from Cisco IOS release 12.1(12c)EY to the release 12.1(13)EB, manually created ATM CTTR association will not be in effect on the new primary Route Processor (after switchover). Instead, an ATM CTTR (with random index) corresponding to Frame Relay CTTR is recreated with an MBS value generated from the Bc value configured on the Frame Relay side. This means, after upgrade, if manual association of ATM CTTR to Frame Relay CTTR is required, it needs to be redone (by deleting the existing Frame Relay CTTR and then recreating it with manual association of an ATM CTTR).

2. When the Catalyst 8540 MSR is downgraded from release 12.1(13)EB to any lower version, ATM CTTRs having packet-discard enabled and ATM VCs associated with CTTRs having packet-discard enabled are lost. This is because, during an upgrade if release 12.1(13)EB is running on the primary Route Processor and some lower version is running on the secondary Route Processor, the ATM CTTR (having packet-discard enabled) information are not synced to the secondary Route Processor. And if Route Processor switchover is done to complete the downgrade the ATM CTTRs having packet-discard enabled are lost along with the ATM VCs associated with these ATM CTTRs.

3. When the Catalyst 8540 MSR is downgraded from release 12.1(13)EB to any lower version (in the 12.1 train), Frame Relay CTTRs having non-default frame size and Frame Relay VCs associated with Frame Relay CTTR having non-default frame size are lost. This is because, during an downgrade if release 12.1(13)EB is running on the primary Route Processor and some lower version is running on the secondary Route Processor, the Frame Relay CTTR (having non-default frame size) information are not synced to the secondary Route Processor. And if Route Processor switchover is done to complete the downgrade, Frame Relay CTTRs having non-default frame size are lost along with the Frame Relay VCs associated with these Frame Relay CTTRs. However, the Frame Relay VCs will not be removed from the firmware. But, traffic flow through those VCs STOPS at the ATM leg (including that of psuedo port) is NOT present in the hardware for all Frame Relay VCs after downgrade. To recover from this problem, use the hw-module slot/subslot reset command and recreate the lost Frame Relay CTTRs and Frame Relay VCs.

4. Frame Relay CTTR could be configured with Bc/Be less than Frame Size before release 12.1(13)EB. With release12.1(13)EB, Bc/Be can not be less than the Frame Relay frame size. Hence if the Catalyst 8540 MSR, Catalyst 8510 MSR, or a LightStream 1010 is running an image older than release 12.1(13)EB and if the startup configuration has the Bc/Be value less than 2000 bits (in older images default frame size = 250 bytes = 2000 bits) and is reloaded and rebooted with release 12.1(13)EB, then the following error messages might appear for the primary Route Processor:

% Bc should be greater than Frame-size (in bits). 

Any Frame Relay CTTR having Bc/Be less than Frame Size might be lost after reboot.

Also, Frame Relay VCs associated with these CTTRs might cause the following message to appear when the primary Route Processor is coming up:

%FRATM-3-CONFIG_ERROR:  Invalid rx-cttr 


Note The Frame Relay VCs associated with these CTTRs might be lost after reboot.


New and Changed Information

This section includes new features that appear in this and previous releases of Cisco IOS release 12.1 software. The new features are sorted by release number.

New Features in Release 12.1(26)E8

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR in Cisco IOS Release 12.1(26)E8.

New Features in Release 12.1(26)E7

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR in Cisco IOS Release 12.1(26)E7.

New Features in Release 12.1(26)E5

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR in Cisco IOS Release 12.1(26)E5.

New Features in Release 12.1(26)E4

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR in Cisco IOS Release 12.1(26)E4.

New Features in Release 12.1(26)E3

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR in Cisco IOS Release 12.1(26)E3.

New Features in Release 12.1(26)E2

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR in Cisco IOS Release 12.1(26)E2.

New Features in Release 12.1(26)E1

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR in Cisco IOS Release 12.1(26)E1.

Catalyst 8510 CSR

There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(26)E1.

New Features in Release 12.1(26)E

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR in Cisco IOS Release 12.1(26)E.

Catalyst 8510 CSR

There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(26)E.

New Features in Release 12.1(23)E1

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR in Cisco IOS Release 12.1(23)E1.

Catalyst 8510 CSR

There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(23)E1.

New Features in Release 12.1(23)E

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR in Cisco IOS Release 12.1(23)E.

Catalyst 8510 CSR

There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(23)E.

New Features in Release 12.1(22)E

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR in Cisco IOS Release 12.1(22)E.

Catalyst 8510 CSR

There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(22)E.

New Features in Release 12.1(20)EB

Catalyst 8510 MSR and LightStream 1010

The following new features are available for the Catalyst 8510 MSR in Cisco IOS Release 12.1(20)EB:

SSH Server Version 2

LANE with Jumbo Frames on enhanced ATM router module

Catalyst 8510 CSR

There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(20)E.

New Features in Release 12.1(20)E

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR in Cisco IOS Release 12.1(20)E.

Catalyst 8510 CSR

There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(20)E.

New Features in Release 12.1(19)E2

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR in Cisco IOS Release 12.1(19)E2.

Catalyst 8510 CSR

There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(19)E2.

New Features in Release 12.1(14)EB1

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(14)EB1.

New Features in Release 12.1(19)E

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR in Cisco IOS Release 12.1(19)E.

New Features in Release 12.1(14)EB

Catalyst 8510 MSR and LightStream 1010

The following new features are available for the Catalyst 8510 MSR in Cisco IOS Release 12.1(14)EB:

RFC1406 enhancements for CES-Provides SNMP support for:

Read and write access to CES interface related objects using dsx1ConfigTable (CSCdv46424)

Read access to DS0 time slot or slots using dsx1FracTable (CSCin18227)

Read access to NSAP address configuration of the circuit using ciscoAtmIfSoftVcDestAddress of CISCO-ATM-IF-MIB (CSCdz32265)

New Features in Release 12.1(14)E1

Catalyst 8510 MSR and LightStream 1010

The following new feature is available for the Catalyst 8510 MSR in Cisco IOS Release 12.1(14)E1:

SNMP support for ARM sub interface

New Features in Release 12.1(13)EB1

Catalyst 8510 MSR and LightStream 1010

The following new features are available for the Catalyst 8510 MSR in Cisco IOS Release 12.1(13)EB1:

Point-to-Multipoint Soft PVCs

Overflow Queuing for VBR-nrt on Frame Relay interface modules

Configuring Frame Relay frame size for Frame Relay-ATM interworking

Configuring Service Class Overbooking

Soft-PVC support on ATM 0 interface

RFC-2515 support

Traffic parameter modification for Soft VCs and Soft VPs

New Features in Release 12.1(13)E1

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(13)E1.

New Features in Release 12.1(12c)EY

Catalyst 8510 MSR and LightStream 1010

The following new features are available for the Catalyst 8510 MSR in Cisco IOS Release 12.1(12c)EY:

SSH (Secure Shell)

Circuit Emulation Services (CES) switched VCs

SNMP Version 3

New Features in Release 12.1(12c)E1

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(12c)E1.

New Features in Release 12.1(12c)E

Catalyst 8510 MSR and LightStream 1010

The following new feature is available for the Catalyst 8510 MSR in Cisco IOS Release 12.1(12c)E:

SNMP provisioning of ATM interface event traps to an SNMP host

Traffic shaping on well-known VCs

New Features in Release 12.1(11b)E1

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(11b)E1.

New Features in Release 12.1(11b)E

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(11b)E.

New Features in Release 12.1(10)EY

Catalyst 8510 MSR and LightStream 1010

The following features are available for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(10)EY:

MPLS LDP (Label Distribution Protocol) support for both LSR (label switch router) and LER

MPLS LER on the 10/100 Base-TX, 100 Base-FX interface modules

Frame Relay PVCs terminated on ATM router module

SONET MIB (RFC 2558)

Two Ended Soft VC Configuration

PNNI Connection Trace

New Features in Release 12.1(10)E

Catalyst 8510 MSR and LightStream 1010

The following features are available for the Catalyst 8510 MSR and LightStream 1010 switch routers in
Cisco IOS Release 12.1(10)E:

Priority Soft PVC Preservation on IMA Bandwidth Reduction

Standard Signalling for Frame Relay Soft PVCs

ATM Threshold Group Enhancements

New Features in Release 12.1(7a)EY1

Catalyst 8510 MSR and LightStream 1010

There are no new features for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(7a)EY1.

New Features in Cisco IOS Release 12.1(7a)EY

Catalyst 8510 MSR and LightStream 1010

The following features are available for the Catalyst 8510 and LightStream 1010 switch routers in Cisco IOS Release 12.1(7a)EY:

VBR on ATM router module support

Shaped Tunnel Support for ATM router module

Rate Limiting

Traffic-Shaping Carrier Module (TSCAM)

ADP

Radius Support (TACACS+-like authentication)

New Features in Cisco IOS Release 12.1(6)EY

Catalyst 8510 MSR and LightStream 1010

The following new feature is available for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(6)EY:

ITT Enhancements

New Features in Cisco IOS Release 12.1(5)EY1

Catalyst 8510 MSR and LightStream 1010

The following new feature is available for the Catalyst 8510 MSR and the LightStream 1010 switch in Cisco IOS Release 12.1(5)EY1.

Power-on-diagnostics

Caveats

Caveats describe unexpected behavior or defects in Cisco IOS software releases. Caveats use a tracking number (DDTS No.) and the release number to maintain the database information. For a list of the caveats and their status for the Cisco IOS Release for the Catalyst 8510 and the LightStream 1010 switch see the document, Release Notes for the Catalyst 8510 and the LightStream 1010 Switch for Cisco IOS Release 12.1(26)E8, Part 2: Caveats.

Restriction

This section describes the following Catalyst 8510 MSR and the LightStream 1010 switch restriction:

Unicast Reverse Path Forwarding Not Supported

The Catalyst 8510 MSR and the LightStream 1010 switches do not support Unicast Reverse Path Forwarding (uRPF).

Interoperability

Starting with Cisco IOS Release 12.0(10)W5(18b) software release, hardware and software functionality interoperability exists between CSR interface modules and MSR interface modules by way of the ATM router module on the MSR chassis running an MSR image.

Y2K Compliance

Catalyst 8510 and LightStream 1010 systems running Cisco IOS Release 12.0(0.6)W5(1) or later have been certified as Y2K Compliant. For more information, see the following URL:

http://www.cisco.com/warp/public/752/2000/.

Related Documentation

Site Preparation and Safety Guide

Quick Reference Catalyst 8510 and LightStream 1010 Hardware Information

ATM and Layer 3 Module Installation Guide

Guide to ATM Technology

ATM and Layer 3 Quick Software Configuration Guide

ATM and Layer 3 Switch Router Command Reference

ATM Switch Router Software Configuration Guide

Layer 3 Software Feature and Configuration Guide

Obtaining Documentation

Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems.

Cisco.com

You can access the most current Cisco documentation on the World Wide Web at this URL:

http://www.cisco.com/univercd/home/home.htm

You can access the Cisco website at this URL:

http://www.cisco.com

International Cisco websites can be accessed from this URL:

http://www.cisco.com/public/countries_languages.shtml

Ordering Documentation

You can find instructions for ordering documentation at this URL:

http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm

You can order Cisco documentation in these ways:

Registered Cisco.com users (Cisco direct customers) can order Cisco product documentation from the Ordering tool:

http://www.cisco.com/en/US/partner/ordering/index.shtml

Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco Systems Corporate Headquarters (California, USA) at 408 526-7208 or, elsewhere in North America, by calling 800 553-NETS (6387).

Documentation Feedback

You can submit e-mail comments about technical documentation to bug-doc@cisco.com.

You can submit comments by using the response card (if present) behind the front cover of your document or by writing to the following address:

Cisco Systems
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883

We appreciate your comments.

Obtaining Technical Assistance

For all customers, partners, resellers, and distributors who hold valid Cisco service contracts, the Cisco Technical Assistance Center (TAC) provides 24-hour-a-day, award-winning technical support services, online and over the phone. Cisco.com features the Cisco TAC website as an online starting point for technical assistance. If you do not hold a valid Cisco service contract, please contact your reseller.

Cisco TAC Website

The Cisco TAC website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The Cisco TAC website is available 24 hours a day, 365 days a year. The Cisco TAC website is located at this URL:

http://www.cisco.com/tac

Accessing all the tools on the Cisco TAC website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a login ID or password, register at this URL:

http://tools.cisco.com/RPF/register/register.do

Opening a TAC Case

Using the online TAC Case Open Tool is the fastest way to open P3 and P4 cases. (P3 and P4 cases are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Case Open Tool automatically recommends resources for an immediate solution. If your issue is not resolved using the recommended resources, your case will be assigned to a Cisco TAC engineer. The online TAC Case Open Tool is located at this URL:

http://www.cisco.com/tac/caseopen

For P1 or P2 cases (P1 and P2 cases are those in which your production network is down or severely degraded) or if you do not have Internet access, contact Cisco TAC by telephone. Cisco TAC engineers are assigned immediately to P1 and P2 cases to help keep your business operations running smoothly.

To open a case by telephone, use one of the following numbers:

Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 227)
EMEA: +32 2 704 55 55
USA: 1 800 553-2447

For a complete listing of Cisco TAC contacts, go to this URL:

http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml

TAC Case Priority Definitions

To ensure that all cases are reported in a standard format, Cisco has established case priority definitions.

Priority 1 (P1)—Your network is "down" or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.

Priority 2 (P2)—Operation of an existing network is severely degraded, or significant aspects of your business operation are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation.

Priority 3 (P3)—Operational performance of your network is impaired, but most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels.

Priority 4 (P4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations.

Obtaining Additional Publications and Information

Information about Cisco products, technologies, and network solutions is available from various online and printed sources.

Cisco Marketplace provides a variety of Cisco books, reference guides, and logo merchandise. Go to this URL to visit the company store:

http://www.cisco.com/go/marketplace/

The Cisco Product Catalog describes the networking products offered by Cisco Systems, as well as ordering and customer support services. Access the Cisco Product Catalog at this URL:

http://cisco.com/univercd/cc/td/doc/pcat/

Cisco Press publishes a wide range of general networking, training and certification titles. Both new and experienced users will benefit from these publications. For current Cisco Press titles and other information, go to Cisco Press online at this URL:

http://www.ciscopress.com

Packet magazine is the Cisco quarterly publication that provides the latest networking trends, technology breakthroughs, and Cisco products and solutions to help industry professionals get the most from their networking investment. Included are networking deployment and troubleshooting tips, configuration examples, customer case studies, tutorials and training, certification information, and links to numerous in-depth online resources. You can access Packet magazine at this URL:

http://www.cisco.com/packet

iQ Magazine is the Cisco bimonthly publication that delivers the latest information about Internet business strategies for executives. You can access iQ Magazine at this URL:

http://www.cisco.com/go/iqmagazine

Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL:

http://www.cisco.com/ipj

Training—Cisco offers world-class networking training. Current offerings in network training are listed at this URL:

http://www.cisco.com/en/US/learning/index.html