DISC Commands
This chapter provides disconnect (DISC) commands for the Cisco ONS 15454, Cisco ONS 15600, Cisco ONS 15454 M2, and Cisco ONS 15454 M6.
Note All commands supported on the Cisco ONS 15454 platform are also supported on Cisco ONS 15454 M2 and Cisco ONS 15454 M6 platforms.
9.1 DISC-TACC
(Cisco ONS 15454) The Disconnect Test Access (DISC-TACC) command disconnects the test access point (TAP) and puts the connection back to its original state (no splits). For more information on test access (TACC), refer to the Cisco ONS15454 SONET and Cisco ONS 15600 SONET TL1 Reference Guide.
Usage Guidelines
For this command to be applicable, you must first create the TAP using the ED-<MOD_PATH> command.
Note If you send this command to an already disconnected TAP connection, an SADC error message is returned.
Note If the system cannot release TAP, an SRTN error message is returned.
Category
Troubleshooting and Test Access
Security
Maintenance
Input Format
DISC-TACC:[<TID>]:<TAP>:<CTAG>;
Input Example
DISC-TACC:CISCO:8:123;
Input Parameters
<TAP> |
The test access point number. The TAP number must be an integer with a range of 1 to 999. String Note This command only supports disconnecting one TAP at a time. |