Cisco ONS SDH TL1 Command Guide, Release 9.0
Chap 6: CLR Commands
Downloads: This chapterpdf (PDF - 313.0KB) The complete bookPDF (PDF - 18.75MB) | Feedback

CLR Commands

Table Of Contents

CLR Commands

6.1  CLR-COND-SECU


CLR Commands


This chapter provides CLR (clear) commands for the Cisco ONS 15454 SDH, Cisco ONS 15600 SDH, and Cisco ONS 15310-MA SDH.

6.1  CLR-COND-SECU

(Cisco ONS 15454 SDH, Cisco ONS 15600 SDH, and Cisco ONS 15310-MA SDH) The Clear Security Condition (CLR-COND-SECU) command clears the specified standing condition.

Usage Guidelines

In Software Release 6.0 and later, only the INTRUSION-PSWD parameter value is supported.

Category

Security

Security

Superuser

Input Format

CLR-COND-SECU:[<TID>]::<CTAG>[::<SECUALMTYPE>];

Input Example

CLR-COND-SECU:CISCO::123::INTRUSION-PSWD:

Table 6-1 CLR-COND-SECU Command - Parameter Support

Input Parameters
Description
ONS 15454 SDH
ONS 15600 SDH
ONS 15310-MA SDH

<SECUALMTYPE>

(Optional) Secure alarm type. Defaults to INTRUSION-PSWD. The parameter type is SECUALMTYPE, which is the security alarm type.

Y

Y

Y

INTRUSION-PSWD

Condition raised after an invalid password is used during login. Condition is raised only if the password is used a specified number of times.

Y

Y

Y