Guest

Cisco ONS 15600 Series

Release Notes for Cisco ONS 15600 Release 9.0

  • Viewing Options

  • PDF (443.3 KB)
  • Feedback
Release Notes for Cisco ONS 15600 Release 9.0

Table Of Contents

Release Notes for Cisco ONS 15600 Release 9.0

Contents

Changes to the Release Notes

Using the Bug ToolKit

New Features and Functionality

New Software Features and Functionality

New Software Features and Functionality

Qualification of Pluggables

Login Warning Message Window

IPv6 Native Support

SNMPv3 Support

Overlay Ring Circuits

TL1

TL1 Command Changes

TL1 ENUM Changes

Related Documentation

Release-Specific Documents

Platform-Specific Documents

Obtaining Documentation and Submitting a Service Request


Release Notes for Cisco ONS 15600 Release 9.0


Revised: October 2008, OL-17631-01

Note The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's path protection feature, which may be used in any topological network configuration. Cisco does not recommend using its path protection feature in any particular topological network configuration.


Release notes contain the new features and enhancements for the Cisco ONS 15600. For detailed information regarding features, capabilities, hardware, and software introduced with this release, refer to Release 98.0 of the Cisco ONS 15600 Procedure Guide, Cisco ONS 15600 Reference Manual, Cisco ONS SONET TL1 Command Guide, and Cisco ONS 15600 Troubleshooting Guide. For the latest version of the Release Notes for Cisco ONS 15600 Release 9.0, visit the following URL:

http://www.cisco.com/en/US/products/hw/optical/ps4533/prod_release_notes_list.html

Cisco also provides Bug Toolkit, a web resource for tracking defects. To access Bug Toolkit, visit the following URL:

http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs

Contents

Changes to the Release Notes

Using the Bug ToolKit

New Features and Functionality

Related Documentation

Obtaining Documentation and Submitting a Service Request

Changes to the Release Notes

This section documents supplemental changes that have been added to the Release Notes for Cisco ONS 15600 Release 9.0 since the production of the Cisco ONS 15600 System Software CD for Release 9.0.

Using the Bug ToolKit

In Cisco ONS 15600 Software Release 9.0 and later, use the Bug ToolKit to view the list of outstanding and resolved bugs in a release. This section explains how to use the Bug ToolKit.


Step 1 Go to http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs and click Launch Bug Toolkit.

You will be prompted to log into Cisco.com.

Step 2 To search for a specific bug, enter the bug ID in the Search for Bug ID field and click Go.

To search for all the bugs in a specified release, enter the following search criteria:

Select the Product Category—Select Optical Networking.

Select Products—Select the products from the list. Press and hold the Ctrl key to select multiple products.

Software Version—Select 9.0 to view the list of outstanding and resolved bugs in Cisco ONS 15600 Software Release 9.0.

Advanced Options—You can either perform a search using the default search criteria or define custom criteria for an advanced search. To customize the advanced search, select Use custom settings for severity, status, and others and provide the following information:

Severity—Select the severity level.

Status—Select Open, Fixed, or Terminated.

Select Open to view all the open bugs. To filter the open bugs, clear the Open check box and select the appropriate suboptions that appear below the Open check box. The suboptions are New, Held, More, Open, Waiting, Assigned, Forwarded, Postponed, Submitted, and Information Required. For example, if you want to view only new bugs in Cisco ONS 15600 Software Release 9.0, only select New.

To view fixed bugs, select Fixed. To filter fixed bugs, clear the Fixed check box and select the appropriate suboptions that appear below the fixed check box. The suboptions are Resolved or Verified.

To view terminated bugs, select Terminated. To filter fixed bugs, clear the Terminated check box and select the appropriate suboptions that appear below the terminated check box. The suboptions are Closed, Junked, and Unreproducible. Select select multiple options as required.

Advanced—Select the Show only bugs containing bug details check box to view only those bugs that contain detailed information, such as symptoms and workarounds.

Modified Date—Select this option if you want filter bugs based on the date on which the bugs were last modified.

Results Displayed Per Page—Select the appropriate option from the list to restrict the number of results that appear per page.

Step 3 Click Search.

The Bug Toolkit displays the list of bugs based on the specified search criteria. You can filter the search results based on severity, status and/or technology.


New Features and Functionality

This section highlights new features and functionality for Release 9.0. For detailed documentation of each of these features, consult the user documentation.

New Software Features and Functionality

New Software Features and Functionality

The following new software features are added for Release 9.0:

Qualification of Pluggables

Login Warning Message Window

IPv6 Native Support

SNMPv3 Support

Overlay Ring Circuits

Qualification of Pluggables

This enhancement qualifies additional pluggables on already released ONG boards across different platform. This feature includes the support for the following pluggables for ONS 15600 platform:

ONS-SI-2G-I1 on ASAP 4PIO card

ONS-SI-2G-L2 on ASAP 4PIO card

ONS-XC-10G-I2 on ASAP 1PIO card

ONS-XC-10G-30.3 to ONS-XC-10G-60.3 on ASAP 1PIO card

Login Warning Message Window

In Software Release 8.5 and earlier, the warning text in the CTC login screen is not displayed automatically. The user has to slide the vertical slider bar to see the warning text. A new warning message window has been added to display the warning message when you log into CTC.

IPv6 Native Support

Cisco ONS 15600 Software R9.0 and later supports native IPv6. ONS 15600 can be managed over IPv6 DCN networks by enabling the IPv6 feature. After you enable IPv6 in addition to IPv4, you can use CTC, TL1, and SNMP over an IPv6 DCN to manage ONS 15600. Each NE can be assigned an IPv6 address in addition to the IPv4 address. You can access the NE by entering the IPv4 address, an IPv6 address or the DNS name of the device. The IPv6 address is assigned only on the LAN interface of the NE. DCC/GCC interfaces use the IPv4 address.

SNMPv3 Support

Cisco ONS 15600 Software R9.0 and later supports SNMPv3 in addition to SNMPv1 and SNMPv2c. SNMPv3 is an interoperable standards-based protocol for network management. SNMPv3 provides secure access to devices by a combination of authentication and encryption of packets over the network based on the User Based Security Model(USM) and the View-based Access Control Model (VACM).

User Based Security Model—The User based Security Model (USM) uses the HMAC algorithm for generating keys for authentication and privacy. SNMPv3 authenticates data based on its origin, and ensures that the data is received intact. SNMPv1 and v2 authenticate data based on the plain text community string which is less secure when compared to user based authentication model.

View-based Access Control Model—The view-based access control model controls the access to the managed objects.

You can configure SNMPv3 on a node to allow SNMP get and set access to management information and configure a node to send SNMPv3 traps to trap destinations in a secure way. SNMPv3 can be configured in secure mode, non-secure mode, or disabled mode.

Overlay Ring Circuits

An overlay ring configuration consists of a core ring and subtended rings (Figure 12-36). An Overlay Ring Circuit routes traffic around multiple rings in an overlay ring configuration, passing through one or more nodes more than once. This results in multiple cross-connections on the nodes connecting the core ring to the subtended rings. For example, a customer having a core ring with cross-connects provisioned using TL1 can create create cross-connects on subtended rings, due to a business need, without having to hamper the existing cross-connects on the core ring. This circuit can be either protected or unprotected.

Overlay ring supports circuit sizes; STS-1, 3c, 6c, 9c, 12c, 24c, 36c, 48c, and 192cs. Both unidirectional and bidirectional circuits are supported. Overlay ring circuits are contiguous concatenated (CCAT) and not virtual concatenated (VCAT) circuits.

Manual routing is mandatory while provisioning the overlay ring circuit. Overlay ring circuits created using Transaction Language 1 (TL1) are discovered by CTC and the status "DISCOVERED" is displayed. If the overlay ring circuit is deleted, the cross-connects on the core ring and subtended rings get deleted. Cross-connects on a subtended ring can be deleted through TL1 but would reflect as a partial overlay ring circuit in CTC, i.e. core ring will continue having cross-connects.

TL1

TL1 Command Changes

Changed Commands

The following new TL1 commands are changed:

ED-NE-GEN

RTRV-NE-GEN

RTRV-NE-IPMAP

RTRV-MAP-NETWORK

RTRV-TADRMAP

COPY-IOSCFG

COPY-RFILE

ENT-TRAPTABLE

ED-TRAPTABLE

DLT-TRAPTABLE

RTRV-TRAPTABLE

ENT-FTPSERVER

ED-FTPSERVER

DLT-FTPSERVER

RTRV-FTPSERVER

Command Syntax Changes

The syntax of the following commands have changed:

ED-APC syntax changed:

ED-APC[:<TID>]:<aid>:<CTAG>[:::APCENABLE=<apcenable>][:];

To:

ED-APC[:<TID>]:<aid>:<CTAG>[::<role>][:APCENABLE=<apcenable>][:];

ED-CRS-STS1 syntax changed:

ED-CRS-STS1[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

To:

ED-CRS-STS1[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

ED-CRS-STS12C syntax changed:

ED-CRS-STS12C[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

To:

ED-CRS-STS12C[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

ED-CRS-STS18C syntax changed:

ED-CRS-STS18C[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

To: ED-CRS-STS18C[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

ED-CRS-STS192C syntax changed:

ED-CRS-STS192C[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

To:

ED-CRS-STS192C[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

ED-CRS-STS24C syntax changed:

ED-CRS-STS24C[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

To:

ED-CRS-STS24C[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

ED-CRS-STS3C syntax changed:

ED-CRS-STS3C[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

To:

ED-CRS-STS3C[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

ED-CRS-STS48C syntax changed:

ED-CRS-STS48C[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

To

ED-CRS-STS48C[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

ED-CRS-STS6C syntax changed:

ED-CRS-STS6C[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

To:

ED-CRS-STS6C[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

ED-CRS-STS9C syntax changed:

ED-CRS-STS9C[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

To:

ED-CRS-STS9C[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

ED-CRS-VT1 syntax changed:

ED-CRS-VT1[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

To:

ED-CRS-VT1[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]

];

ED-ETH syntax changed:

ED-ETH[:<TID>]:<src>:<CTAG>[:::FLOW=<flow>],[EXPDUPLEX=<expduplex>],[SELECTIVEAUTO=<selectiveauto>],[EXPSPEED=<expspeed>],[VLANCOS=<vlancosthreshold>],[IPTOS=<iptosthreshold>],[NAME=<name>],[CMDMDE=<cmdmde>],[SOAK=<soak>],[LITIMER=<litimer>][:<pst>[,<sst>]];

To:

ED-ETH[:<TID>]:<src>:<CTAG>[:::FLOW=<flow>],[EXPDUPLEX=<expduplex>],[SELECTIVEAUTO=<selectiveauto>],[EXPSPEED=<expspeed>],[VLANCOS=<vlancosthreshold>],[IPTOS=<iptosthreshold>],[NAME=<name>],[CMDMDE=<cmdmde>],[SUPPRESS=<suppress>],[SOAK=<soak>],[LITIMER=<litimer>][:<pst>[,<sst>]];

ED-NE-GEN syntax changed:

ED-NE-GEN[:<TID>]::<CTAG>[:::NAME=<name>],[IPADDR=<ipaddr>],[IPMASK=<ipmask>],[DEFRTR=<defrtr>],[IIOPPORT=<iiopport>],[NTP=<ntp>],[SUPPRESSIP=<mode>],[MODE=<mode>],[SERIALPORTECHO=<serialportecho>];

To:

ED-NE-GEN[:<TID>]::<CTAG>[:::NAME=<name>],[IPADDR=<ipaddr>],[IPMASK=<ipmask>],[DEFRTR=<defrtr>],[IPV6ADDR=<ipv6addr>],[IPV6PREFLEN=<ipv6preflen>],[IPV6DEFRTR=<ipv6defrtr>],[IPV6ENABLE=<ipv6enable>],[IIOPPORT=<iiopport>],[NTP=<ntp>],[SUPPRESSIP=<suppressip>],[MODE=<mode>],[SERIALPORTECHO=<serialportecho>],[OSIROUTINGMODE=<osiroutingmode>],[OSIL1BUFSIZE=<osil1bufsize>],[OSIL2BUFSIZE=<osil2bufsize>];

ED-OC12 syntax changed:

ED-OC12[:<TID>]:<aid>:<CTAG>[:::DCC=<dcc>],[AREA=<area>],[SYNCMSG=<syncmsg>],[SENDDUS=<senddus>],[PJMON=<pjmon>],[SFBER=<sfber>],[SDBER=<sdber>],[MODE=<mode>],[SOAK=<soak>],[OSPF=<ospf>],[LDCC=<ldcc>],[NAME=<name>],[CMDMDE=<cmdmde>],[EXPTRC=<exptrc>],[TRC=<trc>],[TRCMODE=<trcmode>],[TRCFORMAT=<trcformat>],[ADMSSM=<admssm>],[SENDDUSFF=<senddusff>],[AISONLPBK=<aisonlpbk>],[FOREIGNFEND=<foreignFarEnd>],[FOREIGNIP=<foreignIpAddress>],[FREQ=<freq>],[LOSSB=<lossb>],[OPRNOMINAL=<oprnominal>][:<pst>[,<sst>]];

To:

ED-OC12[:<TID>]:<aid>:<CTAG>[:::DCC=<dcc>],[AREA=<area>],[SYNCMSG=<syncmsg>],[SENDDUS=<senddus>],[PJMON=<pjmon>],[SFBER=<sfber>],[SDBER=<sdber>],[MODE=<mode>],[SOAK=<soak>],[OSPF=<ospf>],[LDCC=<ldcc>],[NAME=<name>],[CMDMDE=<cmdmde>],[EXPTRC=<exptrc>],[TRC=<trc>],[TRCMODE=<trcmode>],[TRCFORMAT=<trcformat>],[ADMSSM=<admssm>],[SENDDUSFF=<senddusff>],[AISONLPBK=<aisonlpbk>],[FOREIGNFEND=<foreignFarEnd>],[FOREIGNIP=<foreignIpAddress>],[FREQ=<freq>],[LOSSB=<lossb>],[OPRNOMINAL=<oprnominal>],[OSISDCC=<osisdcc>],[OSILDCC=<osildcc>],[OSIROUTER=<osirouter>][:<pst>[,<sst>]];

ED-OC192 syntax changed:

ED-OC192[:<TID>]:<aid>:<CTAG>[:::DCC=<dcc>],[AREA=<area>],[SYNCMSG=<syncmsg>],[SENDDUS=<senddus>],[PJMON=<pjmon>],[SFBER=<sfber>],[SDBER=<sdber>],[MODE=<mode>],[SOAK=<soak>],[OSPF=<ospf>],[LDCC=<ldcc>],[NAME=<name>],[CMDMDE=<cmdmde>],[EXPTRC=<exptrc>],[TRC=<trc>],[TRCMODE=<trcmode>],[TRCFORMAT=<trcformat>],[ADMSSM=<admssm>],[SENDDUSFF=<senddusff>],[AISONLPBK=<aisonlpbk>],[FOREIGNFEND=<foreignFarEnd>],[FOREIGNIP=<foreignIpAddress>],[FREQ=<freq>],[LOSSB=<lossb>],[OPRNOMINAL=<oprnominal>][:<pst>[,<sst>]];

To:

ED-OC192[:<TID>]:<aid>:<CTAG>[:::DCC=<dcc>],[AREA=<area>],[SYNCMSG=<syncmsg>],[SENDDUS=<senddus>],[PJMON=<pjmon>],[SFBER=<sfber>],[SDBER=<sdber>],[MODE=<mode>],[SOAK=<soak>],[OSPF=<ospf>],[LDCC=<ldcc>],[NAME=<name>],[CMDMDE=<cmdmde>],[EXPTRC=<exptrc>],[TRC=<trc>],[TRCMODE=<trcmode>],[TRCFORMAT=<trcformat>],[ADMSSM=<admssm>],[SENDDUSFF=<senddusff>],[AISONLPBK=<aisonlpbk>],[FOREIGNFEND=<foreignFarEnd>],[FOREIGNIP=<foreignIpAddress>],[FREQ=<freq>],[LOSSB=<lossb>],[OPRNOMINAL=<oprnominal>],[OSISDCC=<osisdcc>],[OSILDCC=<osildcc>],[OSIROUTER=<osirouter>][:<pst>[,<sst>]];

ED-OC3 syntax changed:

ED-OC3[:<TID>]:<aid>:<CTAG>[:::DCC=<dcc>],[AREA=<area>],[SYNCMSG=<syncmsg>],[SENDDUS=<senddus>],[PJMON=<pjmon>],[SFBER=<sfber>],[SDBER=<sdber>],[MODE=<mode>],[SOAK=<soak>],[OSPF=<ospf>],[LDCC=<ldcc>],[NAME=<name>],[CMDMDE=<cmdmde>],[EXPTRC=<exptrc>],[TRC=<trc>],[TRCMODE=<trcmode>],[TRCFORMAT=<trcformat>],[ADMSSM=<admssm>],[SENDDUSFF=<senddusff>],[AISONLPBK=<aisonlpbk>],[FOREIGNFEND=<foreignFarEnd>],[FOREIGNIP=<foreignIpAddress>],[FREQ=<freq>],[LOSSB=<lossb>],[OPRNOMINAL=<oprnominal>][:<pst>[,<sst>]];

To:

ED-OC3[:<TID>]:<aid>:<CTAG>[:::DCC=<dcc>],[AREA=<area>],[SYNCMSG=<syncmsg>],[SENDDUS=<senddus>],[PJMON=<pjmon>],[SFBER=<sfber>],[SDBER=<sdber>],[MODE=<mode>],[SOAK=<soak>],[OSPF=<ospf>],[LDCC=<ldcc>],[NAME=<name>],[CMDMDE=<cmdmde>],[EXPTRC=<exptrc>],[TRC=<trc>],[TRCMODE=<trcmode>],[TRCFORMAT=<trcformat>],[ADMSSM=<admssm>],[SENDDUSFF=<senddusff>],[AISONLPBK=<aisonlpbk>],[FOREIGNFEND=<foreignFarEnd>],[FOREIGNIP=<foreignIpAddress>],[FREQ=<freq>],[LOSSB=<lossb>],[OPRNOMINAL=<oprnominal>],[OSISDCC=<osisdcc>],[OSILDCC=<osildcc>],[OSIROUTER=<osirouter>][:<pst>[,<sst>]];

ED-OC48 syntax changed:

ED-OC48[:<TID>]:<aid>:<CTAG>[:::DCC=<dcc>],[AREA=<area>],[SYNCMSG=<syncmsg>],[SENDDUS=<senddus>],[PJMON=<pjmon>],[SFBER=<sfber>],[SDBER=<sdber>],[MODE=<mode>],[SOAK=<soak>],[OSPF=<ospf>],[LDCC=<ldcc>],[NAME=<name>],[CMDMDE=<cmdmde>],[EXPTRC=<exptrc>],[TRC=<trc>],[TRCMODE=<trcmode>],[TRCFORMAT=<trcformat>],[ADMSSM=<admssm>],[SENDDUSFF=<senddusff>],[AISONLPBK=<aisonlpbk>],[FOREIGNFEND=<foreignFarEnd>],[FOREIGNIP=<foreignIpAddress>],[FREQ=<freq>],[LOSSB=<lossb>],[OPRNOMINAL=<oprnominal>][:<pst>[,<sst>]];

To:

ED-OC48[:<TID>]:<aid>:<CTAG>[:::DCC=<dcc>],[AREA=<area>],[SYNCMSG=<syncmsg>],[SENDDUS=<senddus>],[PJMON=<pjmon>],[SFBER=<sfber>],[SDBER=<sdber>],[MODE=<mode>],[SOAK=<soak>],[OSPF=<ospf>],[LDCC=<ldcc>],[NAME=<name>],[CMDMDE=<cmdmde>],[EXPTRC=<exptrc>],[TRC=<trc>],[TRCMODE=<trcmode>],[TRCFORMAT=<trcformat>],[ADMSSM=<admssm>],[SENDDUSFF=<senddusff>],[AISONLPBK=<aisonlpbk>],[FOREIGNFEND=<foreignFarEnd>],[FOREIGNIP=<foreignIpAddress>],[FREQ=<freq>],[LOSSB=<lossb>],[OPRNOMINAL=<oprnominal>],[OSISDCC=< osisdcc>],[OSILDCC=<osildcc>],[OSIROUTER=<osirouter>][:<pst>[,<sst>]];

ED-T1 syntax changed:

ED-T1[:<TID>]:<aid>:<CTAG>[:::LINECDE=<linecde>],[FMT=<fmt>],[LBO=<lbo>],[TACC=<tacc>],[TAPTYPE=<taptype>],[SOAK=<soak>],[SFBER=<sfber>],[SDBER=<sdber>],[SYNCMSG=<syncmsg>],[SENDDUS=<senddus>],[NAME=<name>],[CMDMDE=<cmdmde>],[AISONLPBK=<aisonlpbk>],[MODE=<mode>],[SYNCMAP=<syncmap>],[ADMSSM=<admssm>],[VTMAP=<vtmap>],[AISVONAIS=<aisvonais>],[AISONLOF=<aisonlof>],[INHFELPBK=<inhfelpbk>],[BERTMODE=<bertmode>],[BERTPATTERN=<bertpattern>],[BERTERRCOUNT=<berterrcount>][:<pst>[,<sst>]];

To:

ED-T1[:<TID>]:<aid>:<CTAG>[:::LINECDE=<linecde>],[FMT=<fmt>],[LBO=<lbo>],[TACC=<tacc>],[TAPTYPE=<taptype>],[SOAK=<soak>],[SFBER=<sfber>],[SDBER=<sdber>],[SYNCMSG=<syncmsg>],[SENDDUS=<senddus>],[NAME=<name>],[CMDMDE=<cmdmde>],[AISONLPBK=<aisonlpbk>],[MODE=<mode>],[SYNCMAP=<syncmap>],[ADMSSM=<admssm>],[VTMAP=<vtmap>],[AISVONAIS=<aisvonais>],[AISONLOF=<aisonlof>],[INHFELPBK=<inhfelpbk>],[INHFEBPLPBK=<inhfebplpbk>],[BERTMODE=<bertmode>],[BERTPATTERN=<bertpattern>],[BERTERRCOUNT=<berterrcount>][:<pst>[,<sst>]];

ED-VLAN syntax changed:

ED-VLAN[:<TID>]:<aid>:<CTAG>[:::NAME=<name>],[PROTN=<protn>][:];

To:

ED-VLAN[:<TID>]:<aid>:<CTAG>[:::NAME=<name>],[PROTN=<protn>],[MACLEARNING=<maclearning>],[IGMPENABLE=<igmpenable>],[IGMPFASTLEAVE=<igmpfastleave>],[IGMPSUPP=<igmpsupp>][:];

ENT-FTPSERVER syntax changed:

ENT-FTPSERVER[:<TID>]::<CTAG>:::IPADDR=<IPADDR>,IPMASK=<IPMASK>,ENABLE=<ENABLE>,[TIMER=<TIMER>];

To:

ENT-FTPSERVER[:<TID>]::<CTAG>:::IPADDR=<IPADDR>,[IPMASK=<IPMASK>],ENABLE=<ENABLE>,[TIMER=<TIMER>];

Command Response Changes

The following TL1 command responses have changed:

RTRV-ALM-BITS response changes:

<aid>,[<condtype>]:<condeff>,,,[<locn>],[<dirn>],,:,

To:

<aid>,[<aidtype>]:<ntfcncde>,<condtype>,<srveff>,[<ocrdat>],[<ocrtm>],[<location>],[<direction>]:[<desc>],

RTRV-ALS response changes:

<slot>,[<rslt>]:[<diagtype>],[<peer>],[<aid>],[<aidtype>]

To:

:[<TID>]:<aid>:<CTAG>[::::]

> rtrv-apc::all:1

RTRV-BLSR response changes:

[<UID>]:[<aid>]:[<ntfcncde>],[<secualmtype>],[<time>],[<date>],[<source>],[<userid>],[<dbchgseq>],[<command>],[<aid>],,

To:

[<aid>]::[<ringid>],[<nodeid>],[<mode>],[<rvrtv>],[<rvtm>],[<srvrtv>],[<srvtm>],[<eastwork>],[<westwork>],[<eastprot>],[<westprot>]

RTRV-GIGE response changes:

<aid>:,,[<role>],[<status>]:[<adminstate>],[<linkstate>],[<mtu>],[<mfs>],[<flow>],[<flowctrl>],[<autoneg>],[<hiwmrk>],[<lowmrk>],[<optics>],[<duplex>],[<speed>],[<name>],[<macaddr>],[<lbcl>],[<opt>],[<opr>],[<freq>],[<lossb>],[<suppress>],[<soak>],[<soakleft>],[<squelch>],[<cir>],[<cbs>],[<ebs>],[<lienable>],[<litimer>]:<pst>,[<sst>]

To:

<aid>:,,[<role>],[<status>]:[<adminstate>],[<linkstate>],[<mtu>],[<mfs>],[<flow>],[<flowctrl>],[<autoneg>],[<hiwmrk>],[<lowmrk>],[<optics>],[<duplex>],[<speed>],[<name>],[<macaddr>],[<lbcl>],[<opt>],[<opr>],[<freq>],[<lossb>],[<suppress>],[<soak>],[<soakleft>],[<squelch>],[<cir>],[<cbs>],[<ebs>],[<lienable>],[<litimer>],[<actflow>],[<actduplex>],[<actspeed>]:<pst>,[<sst>]

RTRV-NE-GEN response changes:

[<ipaddr>],[<ipmask>],[<defrtr>],[<iiopport>],[<ntp>],[<name>],[<swver>],[<load>],[<protswver>],[<protload>],[<defdesc>],[<platform>],[<secumode>],[<suppressip>],[<mode>],[<autopm>],[<serialportecho>]

To:

[<ipaddr>],[<ipmask>],[<defrtr>],[<ipv6addr>],[<ipv6preflen>],[<ipv6defrtr>],[<ipv6enable>],[<iiopport>],[<ntp>],[<name>],[<swver>],[<load>],[<protswver>],[<protload>],[<defdesc>],[<platform>],[<secumode>],[<suppressip>],[<mode>],[<autopm>],[<serialportecho>],[<osiroutingmode>],[<osil1bufsize>],[<osil2bufsize>]

TL1 ENUM Changes

CARDMODE

The following CARDMODE enum items are added:

CARDMODE_MLMR_AUTO => "MLMR-AUTO"

CARDMODE_MLMR_MANUAL => "MLMR-MANUAL"

CARDMODE is used in the following commands:

ED-EQPT

ED-OCH

ENT-EQPT

RTRV-EQPT

RTRV-OCH

EQPT_TYPE

The following EQPT_TYPE enum items are added:

EQPT_TYPE_EQPT_ID_FMEC_155E_CARD_1TO1 => "FMEC-155E-1TO1"

EQPT_TYPE_EQPT_ID_OPT_RAMP_C => "OPT-RAMP-C"

EQPT_TYPE_EQPT_ID_PSM => "PSM"

EQPT_TYPE_EQPT_ID_WBE_21 => "E1-21-DS3-E3-3"

EQPT_TYPE_EQPT_ID_WBE_63 => "E1-63-DS3-E3-3"

EQPT_TYPE_EQPT_ID_XP_4_10G => "OTU2-XP"

The following EQPT_TYPE is used in the following commands:

REPT-ALM-EQPT

REPT-ALM-MOD2ALM

REPT-ALM-SYNCN

REPT-EVT-EQPT

REPT-EVT-MOD2ALM

REPT-EVT-SYNCN

EQUIPMENT_TYPE

The following EQUIPMENT_TYPE enum items are added:

EQUIPMENT_TYPE_ET_OPT_RAMP_C => "OPT-RAMP-C"

EQUIPMENT_TYPE_ET_PSM => "PSM"

EQUIPMENT_TYPE_ET_WBE_21 => "E1-21-DS3-E3-3"

EQUIPMENT_TYPE_ET_WBE_63 => "E1-63-DS3-E3-3"

EQUIPMENT_TYPE_ET_XP_4_10G => "OTU2-XP"

EQUIPMENT_TYPE is used in the following commands:

CHG-EQPT

ENT-EQPT

ETH_AISACTION

The following ETH_AISACTION enum items are added:

ETH_AISACTION_NONE => "AIS-NONE"

ETH_AISACTION_PROPAGATION => "AIS-PROPAGATION"

ETH_AISACTION_SQUELCH => "AIS-SQUELCH"

ETH_AISACTION is used in the following commands:

ED-L2-ETH

RTRV-L2-ETH

ETH_IGMPROUTER

The following ETH_IGMPROUTER enum items are added:

ETH_IGMPROUTER_NONE => "NONE"

ETH_IGMPROUTER_STATIC => "STATIC"

ETH_IGMPROUTER is used in the following commands:

ED-L2-ETH

RTRV-L2-ETH

ETH_INGRESSCOS

The following ETH_INGRESSCOS enum items are added:

ETH_INGRESSCOS_0 => "0"

ETH_INGRESSCOS_1 => "1"

ETH_INGRESSCOS_2 => "2"

ETH_INGRESSCOS_3 => "3"

ETH_INGRESSCOS_4 => "4"

ETH_INGRESSCOS_5 => "5"

ETH_INGRESSCOS_6 => "6"

ETH_INGRESSCOS_7 => "7"

ETH_INGRESSCOS_DSCP => "DSCP"

ETH_INGRESSCOS_TRUST => "TRUST"

ETH_INGRESSCOS_VLAN => "VLAN"

ETH_INGRESSCOS is used in the following commands:

ED-L2-ETH

ED-QNQ-ETH

ENT-QNQ-ETH

RTRV-L2-ETH

RTRV-QNQ-ETH

ETH_PROTACTION

The following ETH_PROTACTION enum items are added:

ETH_PROTACTION_NONE => "PROT-NONE"

ETH_PROTACTION_SQUELCH => "PROT-SQUELCH"

ETH_PROTACTION is used in the following commands:

ED-L2-ETH

RTRV-L2-ETH

ETH_RULE

The following ETH_RULE enum items are added:

ETH_RULE_DOUBLE_ADD => "DOUBLE-ADD"

ETH_RULE_XLTE_ADD => "XLTE-ADD"

ETH_RULE is used in the following commands:

ED-QNQ-ETH

ENT-QNQ-ETH

RTRV-QNQ-ETH

ETH_VLANALM

The following ETH_VLANALM enum items are added:

ETH_VLANALM_AIS => "VLAN-AIS"

ETH_VLANALM_NONE => "NONE"

ETH_VLANALM is used in the following commands:

RTRV-VLAN-ETH

MOD1PAYLOA

The following MOD1PAYLOAD enum items are added:

MOD1PAYLOAD_E3 => "E3"

MOD2

The following MOD2 enum items are added:

MOD2_M2_RAMAN => "RAMAN"

MOD2 is used in the following commands:

RTRV-FFP

RTRV-NE-APC

RTRV-NE-WDMANS

RTRV-PMSCHED-ALL

RTRV-PMSCHED-MOD2

RTRV-TRC-MOD2

RTRV-TRC-OCH

MTU_TYPE

The following MTU_TYPE enum items added:

MTU_64 => "64"

MTU_9700 => "9700"

MTU_TYPE is used in the following commands:

ED-GIGE

ODUTRANSMODE

The following ODUTRANSMODE enum items are added:

ODUTRANSMODE_CISCOEXT => "CISCO-EXT"

ODUTRANSMODE_TRANSSTD => "TRANS-STD"

ODUTRANSMODE is used in the following commands:

ED-OCH

RTRV-OCH

OPTICAL_PORT_TYPE

The following OPTICAL_PORT_TYPE enum items are added:

OPTICAL_PORT_TYPE_OPT_PORT_IN_PROT => "IN-PROT"

OPTICAL_PORT_TYPE_OPT_PORT_IN_RAMAN => "IN-RAMAN"

OPTICAL_PORT_TYPE_OPT_PORT_IN_WORK => "IN-WORK"

OPTICAL_PORT_TYPE_OPT_PORT_OUT_PROT => "OUT-PROT"

OPTICAL_PORT_TYPE_OPT_PORT_OUT_RAMAN => "OUT-RAMAN"

OPTICAL_PORT_TYPE_OPT_PORT_OUT_WORK => "OUT-WORK"

OPTICAL_PORT_TYPE is used in the following commands:

RTRV-OCH

RTRV-OMS

RTRV-OTS

OPTICS

The following OPTICS enum items added:

OPTICS_OP_1000_BASE_T => "1000_BASE_T"

OPTICS_OP_100_BASE_BX_D => "100_BASE_BX_D"

OPTICS_OP_100_BASE_BX_U => "100_BASE_BX_U"

OPTICS is used in the following commands:

ED-GIGE

RTRV-ETH

RTRV-FSTE

RTRV-G1000

RTRV-GIGE

OSIMODE

The following OSIMODE enum items are added:

AITS => "AITS"

UITS => "UITS"

OSIMODE is used in the following commands:

ED-LAPD

RTRV-LAPD


Note In Software Release 9.0, OSI TL1 parameters/enum are not supported in commands.


OSIRIB

The following OSIRIB enum items are added:

ES_IS => "ESIS"

IS_IS => "ISIS"

OSIRIB is used in the following commands:

RTRV-OSIRIB


Note In Software Release 9.0, OSI TL1 parameters/enum are not supported in commands.


OSIROLE

The following OSIROLE enum items are added:

NETWORK => "NW"

USER => "USR"

OSIROLE is used in the following commands:

ED-LAPD

RTRV-LAPD


Note In Software Release 9.0, OSI TL1 parameters/enum are not supported in commands.


OSISUBNET

The following OSISUBNET enum items are added:

GCC => "GCC"

INTERNAL => "INT"

LAN => "LAN"

LDCC => "LDCC"

OSC => "OSC"

SDCC => "SDCC"

OSISUBNET is used in the following commands:

RTRV-OSIRIB


Note In Software Release 9.0, OSI TL1 parameters/enum are not supported in commands.


OSI_LEVEL

The following OSI_LEVEL enum items are added:

LEVEL1 => "L1"

LEVEL2 => "L2"

OSI_LEVEL is used in the following commands:

DLT-MAT

ED-MAT

RTRV-MAT


Note In Software Release 9.0, OSI TL1 parameters/enum are not supported in commands.


OSI_ROUTING_MODE

The following OSI_ROUTING_MODE enum items are added:

ES => "ES"

IS1 => "IS1"

IS2 => "IS2"

OSI_ROUTING_MODE is used in the following commands:

ED-NE-GEN

RTRV-NE-GEN


Note In Software Release 9.0, OSI TL1 parameters/enum are not supported in commands.


PAYLOAD_MAPPING

The following PAYLOAD_MAPPING enum items are added:

PAYLOAD_MAPPING_NOFIXEDSTUFF => "NOOPU2FIXEDSTUFF"

PAYLOAD_MAPPING is used in the following commands:

ED-OCH

RTRV-OCH

ED-OTU2

RTRV-OTU2

PRODUCT_TYPE

The following PRODUCT_TYPE enum items are added:

PRODUCT_TYPE_NE_15310_MA_SDH => "ONS15310-MA-SDH"

PRODUCT_TYPE is used in the following commands:

RTRV-MAP-NETWORK

PROTTYPE

The following PROTTYPE enum items are added:

PROTTYPE_PRT_ONEPLUSONEL2 => "ONEPLUSONEL2"

PROTTYPE is used in the following commands:

ENT-FFP-MOD2

RTRV-FFP

RAMAN_ACTION

The following RAMAN_ACTION enum items are added:

ACCEPTPARAMS => "ACCEPT"

DOCALCPARAMS => "DO-CALCPAR"

DOMEAS => "DO-MEASURE"

DORSTSM => "DO-RSTSM"

DOTEST => "DO-TEST"

RSTAFTERTEST => "RESTORE"

RAMAN_ACTION is used in the following commands:

OPR-RAMAN

RAMAN_QUALITY

The following RAMAN_QUALITY enum items are added:

RAMAN_QUAL_SETUP_FORCED => "SETUP-FORCED"

RAMAN_QUAL_SETUP_GOOD => "SETUP-GOOD"

RAMAN_QUAL_SETUP_NEED_ACCEPT => "SETUP-NEED-ACCEPT"

RAMAN_QUAL_SETUP_UNACCEPT => "SETUP-UNACCEPT"

RAMAN_QUALITY is used in the following commands:

RTRV-OTS

RAMAN_RESTORE_FC

The following RAMAN_RESTORE_FC enum items added:

RAMAN_RESTORE_FC_FAILED => "FAILED"

RAMAN_RESTORE_FC_NOT_EXECUTED => "NOTEXEC"

RAMAN_RESTORE_FC_OK => "OK"

RAMAN_RESTORE_FC_PENDING => "PENDING"

RAMAN_RESTORE_FC is used in the following commands:

RTRV-OTS

RAMAN_SETUP

The following RAMAN_SETUP enum items are added:

BYPASS_NODE => "BYPASS"

MEASURE_NODE => "MEASURE"

START_NODE_BOOSTER => "ST-BOOSTER"

START_NODE_MUX => "ST-MUX"

RAMAN_SETUP is used in the following commands:

OPR-RAMAN

RAMAN_STATUS

The following RAMAN_STATUS enum items are added:

RAMAN_STATUS_ACCEPTED_TUNED => "ACCEPTED-TUNED"

RAMAN_STATUS_FORCE_TUNED => "FORCE-TUNED"

RAMAN_STATUS_NOT_TUNED => "NOT-TUNED"

RAMAN_STATUS_TUNED => "TUNED"

RAMAN_STATUS_TUNED_VERIFIED => "TUNED-VERIFIED"

RAMAN_STATUS_TUNING => "TUNING"

RAMAN_STATUS is used in the following commands:

RTRV-OTS

SLV_TYPE

The following SLV_TYPE enum items added:

SLV_TYPE_ACTIVE_CHANNEL => "ACTIVE-CHANNEL"

SLV_TYPE_OSC => "OSC"

SLV_TYPE is used in the following commands:

RTRV-SLV-WDMANS

STM1E_MODE

The following STM1E_MODE enum items are added:

PAYLOAD_PT_E3 => "E3"

PAYLOAD_PT_OC12 => "OC12"

PAYLOAD_PT_OC3 => "OC3"

PAYLOAD_PT_OC48 => "OC48"

STM1E_MODE is used in the following commands:

ED-FAC

Related Documentation

Release-Specific Documents

Release Notes for the Cisco ONS 15454 SDH, Release 9.0

Release Notes for the Cisco ONS 15310-CL, Release 9.0

Release Notes for the Cisco ONS 15310-MA, Release 9.0

Release Notes for the Cisco ONS 15310-MA SDH, Release 9.0

Release Notes for the Cisco ONS 15600, Release 9.0

Release Notes for the Cisco ONS 15600 SDH, Release 9.0

Cisco ONS 15600 Software Upgrade Guide, Release 9.0

Platform-Specific Documents

Cisco ONS 15600 Procedure Guide
Provides installation, turn up, test, and maintenance procedures

Cisco ONS 15600 Reference Manual
Provides technical reference information for SONET/SDH cards, nodes, and networks

Cisco ONS 15600 Troubleshooting Guide
Provides a list of SONET alarms and troubleshooting procedures, general troubleshooting information, and hardware replacement procedures

Cisco ONS SONET TL1 Command Guide
Provides a comprehensive list of TL1 commands

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.